BETA UEFI Releases for MSI 990FXA-GD80 [MS-7640 PCB 2.2] [E7640AMS.Dxx versions]

E7640AMS.D43
D30 ==> D43
1.Add 220W CPU Support.
1.Remove OVT function to fix CPU core temperature sometimes error under OS.
1.Update Agesa_Orochi_RevC to 4.6.4.1_Agesa_Orochi_049.
2.Update Orochi-AGESAMSI to 4.6.4.1_OR_049_AGESAMSI_m105.
3.Update MsiOc-Orochi to MsiOc_Orochi_m110.
Please note that flashing this release occurs entirely at your own risk!

>>Beta BIOSes<<

Similar Messages

  • BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]

    Where you move the "BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]" was in the link https://forum-en.msi.com/index.php?topic=151619.0?
    That it´s ended?
    Tank you
    José Crispim
    Portugal

    >>Beta BIOSes<<

  • BETA UEFI Releases for the A75MA-G55 [MS-7696 PCB v1.0]

    I am uploading the latest BETA Release for the A75MA-G55 [MS-7696 PCB v1.0] mainboard.  
    Currently, the latest version is E7696AMS.13A [=v1.3b10].
    E7696AMS.120 ---> E7696AMS.13A
    - Fix ps2 kb/mouse issue when WHQL test.
    - Update Llano-AGESAMSI module.
    - Update VBIOS to AMD_SUMO_GENERAL_100.
    - Update Llano-AGESAMSI module.
    --->Fixed DRAM Timing incorrect when DRAM insert DIMM3 or DIMM4.
    ------> a) When OC Genie Enable and insert 1600Mhz Memory, system will reduce Memory frequency to 1333Mhz, but work timing still use DDR1600. DRAM Timing mode must be set to Manual at this moment.
    ------> b) When OC Genie Disable, above setting have be set to Auto.
    - Add CPU FAN 3/4 PIN ITEM and System FAN1 SMART FAN Support.
    - Fixed select RAID mode and SATA decive plug on SATA1 or SATA2, system will hang CP#B2 issue.
    - Fixed AMD USB3 yellow mark issue in WHQL test.
    - Patch System FAN1 SMART Fan Support.
    - Fixed CPU/System1 SMART Fan cannot work on first setting.
    - Patch two Memory fail issue.
    ---->    G.Skill F3-1066CL7T-3GBPK
    ----> G.Skill F3-1066CL7T-6GBPK
    - Patch TL-584 and RST.
    - Fixed when Enabled TPM support, system will hang CP#4F 40 Sec issue.
    - Update TMP patch.
    - Update Llano-AGESAMSI module.
    - Update SB module to 4.6.4.1_AMD_SB900_017.
    - Update AHCI module to 4.6.3_AhciSrc_017.
    - Update CSM function.
    - Update PEI Ram Boot module to 4.6.3_PEIRamBoot_10.
    - Update smiflash module to 4.6.3.6_SMIFLASH_19.
    - Update shell module to 4.6.3_SHELL_20100528_01.
    - Update fixedbootorder module.
    - Update post time tune module to 4.6.4.0_PTT_06.
    - Update to 4.6.3.7_AgesaV5_039.Modified AGESAMSI setup menu for OCICC.
    - Show cpu ratio in cpuz module.
    - Add ukey function.
    - Add VGA display rule.
    - Adjust Initiate Graphic Adapter default to PEG.
    - Fix some time will hang 0Dh by fixbootorder function.
    - Fix plug PCI/PCIE lan card can't boot issue when the "Lan Option ROM" item set disabled.
    - Fix mflash boot issue.
    - Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
    - Fix memory-z part string issue for some memory.
    - Enable C'n'Q function as default and C1E item.
    - Add clear cmos function.
    - Adjust VGA display rule.
    - Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
    - Fix bev device cannot boot.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

    E7696AMS.146 ---> E7696AMS.140
    - Add UEFI_Driver module for doing raid and installing UEFI OS.
    E7696AMS.140 ---> E7696AMS.150
    - Add Agesa MSI Source safe version 4.6.3.7_Llano-AGESAMSI_040-4.   
    - Modified AGESAMSI Adjust Ratio function incorrect.  
    - Support CMOS bad flag in AGESA Platform Configuration.
    E7696AMS.150 ---> E7696AMS.162
    - Fix USB keyboard and mouse would useless after using m-flash boot function.
    - Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
    E7696AMS.162 ---> E7696AMS.163
    - Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
    - Fix windows boot order will be disordered after clear coms or load default.
    Please note that flashing this release occurs entirely at your own risk!
    >>Use the MSI HQ Forum USB flasher<<, Method II for best results.
    Do NOT use the BIOS/UEFI integrated M-Flash Routine.

  • MSI 990FXA-GD80 (MS-7640) Raid issues

    I'm trying to reinstall my windows 7 64 bit on my MSI 990FXA-GD80 (MS-7640) in raid mode. When I'm in the installer and try to add the raid drivers it lists my controller but then BSODs right after loading the driver and yes I used the driver from the MB CD not to mention a number of others. One thing I noticed is that the drivers I found didn't exactly match the option ROM version on my board (3.3.1540.14) closest I found was either .13 or .17. Also when I went into the raid setup and tried to make a JBOD it spit out an error message saying I needed to select two disks to do that operation????? I work with a lot of different raid adapters and I've not seen that one
    So any ideas on this would be greatly appreciated.
    Thank You
    One really confused oldpolishguy

    E7640AMS.BE6
    1.Update clear cmos function.
    2.Fixed int15 can't load default.
    3.Fixed Press the Delete Key of Numeric Keypad can't enter setup issue.
    4.Fixed EFI shell resolution as 1024*768.
    5.Fixed ECO/STANDARD/OC Genie mode don't work issue.
    6.Add TPM windows inbox driver support.
    7.Remove beep for ps/2 if msifastboot enable.
    8.Fixed cpu frequency show error in mainpage when adjust cpu fsb.
    9.Fixed some usb kb or mouse would useless when hotplug in setup.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • MSI 990FXA-GD65 [MS-7640 PCB 3.0] throttling issue

    Hi, i'm on the last official BIOS (J.90) and my CPU throttle to 4x multiplier on my Phenom II X6 1090T.
    I got this problem on every cold start. And i need to reboot in order to temporary fix it...until the next cold start.
    I noticed that when i got the problem, the temperature readings are out of range: right now i'm stuck on X4 and AMD overdrive shows a constant 197°C on all cores and OCCT reports constant 255°C. So i figure it's related to throttling protection based on false/wrong temp values from the temp sensor.
    My CPU voltage is low, the big Noctua is properly installed and very cool (i can feel the heatpipes very cold!)
    I tried differents settings on the bios (disabling cool n quiet for example) but nothing helps. I made a clear CMOS with the hidden button on the connectors panel, problem still there, even with stock bios parameters.
    Is it a bios version issue ? do i need to rollback to another version ?
    I made a ticket to MSI support but response for now.
    Sorry for my bad english, i'm french
    EDIT: my PCB is a 3.0 one and maybe this is my cure ?
    "4.Fix the issue that CPU  Freq will drop  with PCB 3.0 mainboard when
              set AMD Cool'n'Quiet to disable and Pull off the power than enter system ."

    Quote from: ren33 on 30-November-12, 00:59:18
    I am little confused about UEFI versions names
    On this thread https://forum-en.msi.com/index.php?topic=151619.msg1197501#msg1197501 the latest UEFI is called E7640AMS.JA1 , but you recommend me to flash "BIOS 19.10B1"
    Is it the same ?
    Thanks !
    Yeah it's the same. The file is named .JA1 and it's shown at BIOS as "19.10B1". The latest official BIOS is 19.9!
    Your problem seems similar to mine (Core temp : 255°C at cold starts) so I think it's hardware failure (mainboard's sensor maybe)!

  • MSI 990FXA-GD80 voltage control over 1.44V for the CPU FX-8320

    Hi there!
    MSI 990FXA-GD80
    Can anybody help me with overclocking with this board? The voltage looks locked
    and can't push more than 1.44V.
    Any solution/fix?
    This does not work after 1.44V.
    Kind regards 

    I know this is a little late but over the last 3yrs I had much time to play with this board. 
    The board is a beast and its very tricky.  most people think this board has a locked cpu voltage
    but thats not true.  theres a couple ways to access the voltage.  the first way is control center.
    or if you clear the bios by pushing the clear cmos tab in back then when you restart it hit f1 to enter first time setup
    go straight to overclocking features 2nd down on the left side, go right to the vcore and it should show all the way to 2+ volts
    i believe. I currently have a msi 990fxa-gd80v2 board with a fx8320 cpu and i overclock it acording to the seasons.  as crazy as that sounds.  in the winter i can get 4.9ghz stable off it and in the summer i like to run it around 4.5 to 4.6ghz. 
    the board is very basic and practically overclocks itself. the voltage is way way off though.  at 1.62000 voltage the board is actually at around 1.46v to 1.49v no one really know exactly where until you use cpuz on it. i run it at 22x210fsb at 1.58000 to 1.62000v the ram is gskill 1600 ripjaw x  .  the set the ram voltage at 1.503v at ddr3-1600 in the drop down with a 10xht and 10nb multi and i unlink the timings so the board can autodetect the timings and it does it all basically for me.  i have a corsair h100i water cooler and the temps dont go above 46c under full loads, and the chipset runs at 48c no higher.  this is by far the best 990 board known to man.  i have owned 6 or 7 others from asus, gigabyte, asrock ect.  and its wipes the floor with them.  i also have a asrock 990fx extreeme 3 board with a 8120 and that board also overclocks well.  but not nearly as well as this board matter of fact not even close to the speeds of this board.  i will say though.
    i had to rma this board twice and now i have to rma it again but a fan header died on it for no reason and the fastboot option keeps giving me a 67 code display on the error and wont even post if i enable it.  i wont buy another board because there are none at the quality and overclock ability and stable.  i see that person saying the board dont overclock or it wasnt made to.  lol..  it was and oh  boy it is.  just be patient.  and dont ever waste your money on intel.  youll be paying for the name.  ill put my 8320 against any i5 and most i7's running the same hardware. I boot alot of machines and i see them everyday the intels are not anything they claim them to be.  in real home use computing the amd is overall faster.  I believe i have side by side machines booting at the same time and the amds are faster.   booting as far as format and installing windows.   

  • MSI 990FXA-GD80 updated POST code "99"

    I started my computer up last night after 3 months of using it and now it is posting a 99 code when I start the computer. I can't get to bios or boot. Keyboards will not work (both PS2 and USB). BIOS was completely up to date for nearly 3 weeks.
    This morning, to no avail, I tried a new power supply.
    At this point I have tried all of the following:
    -Disconnecting HHD (SATA and POWER)
    -Disconnecting Opitical Drive (SATA and POWER)
    -DISCONNECTING ALL F-PANEL (PWR SW, PWR LED, HDD LED, RESET SW)
    -Disconnecting the USB and HD AUDIO
    -Disconnecting ALL fans.
    -Mounting and remounting the motherboard
    -Mounting and remounting the CPU
    -Attempting to use a new video card
    -Attempting to use a new power supply
    -Placing MOBO on a different surface
    -Reseting the CMOS via the on board button and removing the battery
    -Using only 1 stick of ram to boot
    -New PSU
    Basically I am booting the PC with the power button on the MOBO and the only things connected are the 8 pin MOBO power, the CPU, 1 stick of ram, and 1 of 2 different working video cards.
    After doing all of those things, the MOBO stills post code "99" on the screen and on the MOBO itself. Additionally, keyboard does not work. Furthermore, I cannot access my BIOS or boot screen.
    The original video card and the replacement video card both work on another PC therefore they are not the problem.
    Thus, at this point, I have narrowed the malfunction down to either the following two components:
    -Motherboard
    -CPU (which I doubt, but do not have a AM3+ mobo on hand) or another AM3/AM3+ processor
    Any suggestions or advice are more than welcome and needed.
    I am considering RMAing the motherboard...

    Quote from: xmad on 19-July-12, 03:06:34
    Hopefully the cpu isn't the problem, wish there was a way for you to test it out. A computer shop perhaps?
    Just to be clear, you removed the mobo from the case with just a cpu, cooler, 1 stick ram & psu and don't hear the no vga beep?
    I see you already tried a new psu.
    Hope you get it right soon, good luck I think you are right it's either the cpu or mobo.
    Yes. The GPU is working fine I tested it in another computer. I installed another working GPU, it did the same "99" post.
    Unfortuneately, there are 2 PC shops close by. 1 of them is a "mom and pop" type place that really doesn't get too deep in to technical aspects and doesn't care much for AMD products. The second is a shop that only carries very low end products as well as some i3 type proccessors and mobos.
    Thus, since none of the computer stores give a flip about AMD, I am out of luck in that aspect. I have quite a few AM3 boards laying around, but that does me no good with this Zambezi.
    On a side note, I decided to remove the processor. The processor and the heatsink became merged together. What I mean when I say they became merged is that the thermal paste become basically a superglue between the heatsink and the processor (the FX-4170 naturally runs hot, thus, AMD has included an upgraded heatsink in it with better thermal paste). Anyhow, in order to remove the thing I could only get the mounting lever about a little over half way up. Therefore, on the back row, the pins bent a little (I would say there were making somewhere between a 80-85 degree angle orthogonal to the board). I took a credit card and a screw driver and straightend the pins, stuck it back in, still posted the same thing.
    Last but not least, I read over the mobo specifications and realized that it was backwards compatible. The MSI 990FXA-GD80 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard supports the following CPU types/sockets:
    Quote
    FX / Phenom II / Athlon II / Sempron 100 Series
    I realized I had a (working) AMD CPU HDZ955FBGMBOX Phenom II X4 955 Black Edition 3.2GHz AM3 125W Retail, thus, I mounted it on the MOBO... SAME CODE POSTED...
    It must be the motherboard.

  • MSI 990FXA-GD80 V2 BIOS Settings

    I recently just put together my first new system. It consists of the MSI 990FXA-GD80 V2 board. Lots of reading to find that most of the "other" board owners of different brands, that start wiyh A, and G seem to rant and rave about how good their boards are, and how horrible MSI boards are. Through all of my reading though, there seems to be a whole lot more complaints about how this doesn't work, can't get it to do this, etc,etc, and not nearly as many as those with MSI boards. Thus, why I purchased it, and absolutely love it! I have an AMD 980 BE, Mushkin 1600 Ridgeback 1.5v @ 7-7-7-18-24, Mushkin Chronos Deluxe 240 gig SSD, Coolermaster V8 cooler,all in a Coolermaster 922 HAF case. Currently clocked at 4.1gigs, 24hr Prime stable. My question is if anyone knows, or has info on all the settings on voltages in this BIOS so that I can get a better understanding of what they all are and do,and where they should be set. I don't think I did to bad on my very first overclock, but Iwant more, for the bragging rights, you know. Any help would be appreciated.

    Quote from: stw1911 on 04-January-13, 08:40:53
    Funny you say overclock.net I stumbled upon that site quite some time ago. Now I'm sticking my hands in places that they should not be in, just to find a few more pennies to put into my rig. I knew nothing about computers before I saw that site, and now I am on it almost every day just reading and learning. My first and only computer before this one that I have just built was an old Gateway that I literally resurected from the junk yard with the help of a friend, put a new hard drive and OS in, and had my very first computer. It was an Intel Pentium 1.5 ghz POS. As I said before, I still need a good graphics card to temporarily complete my build, and some more knowledge to tweak it out, then I will start with the bling. Overclock.net got me good!! I don't think I did too bad on my first ever overclock of 4.1, using just multi  and cpu and cpu/nb voltages, but there are a lot more than just those in the bios, like SB volt, CPU PLL volt, NB volt,HT Link volt, DDR Ref volt CPU DDR PHY volt, NB PCI-E volt, and DDR VTT volt. I am trying to get an understanding of what these do, and where a good setting for these is so I can tweak the sh** out of this thing without burnung up the board and processor. This is why I came to this forum to ask these questions, because it is an MSI owners forum. This is an awesome board, and I want to make it pi** all over the A and G boards with the same type of equiptment. I truly think it can, just need a little more knowledge to do it.
    Since you're a beginner I think you should stick to the defaults with the voltages - you can probably bump up the multiplier safely a little bit without needing to touch the voltages. Unless you plan on doing water cooling or anything like that you really don't need to touch the voltages. Auto works fine. I had my Phenom X4 965 BE OC'd to 3.8Gz just by bumping up the multiplier and it was very stable. You don't want to fry your MB by setting the wrong voltages and its not something you really need to do as the gains aren't really there. (again unless you're doing active phase cooling or something hardcore like that) but thats really reserved for the true geeks like me. Not to mention I really doubt you'll even need to over clock at all unless you reallllllllly want to...
    As for graphics cards, I have and LOVE my Evga GTX680... I have the 2GB but theres a 4gb model out now which can handle higher texture fill rates and resolutions... but its expensive $550 or so.... good luck!

  • MSI 990FXA-GD80, POST error code 54

    I have just assembled a new system:
    M-Board: MSI 990FXA-GD80  (UEFI BIOS with factory version E7640 AMSB50, indicated by green label on BIOS chip)
    CPU: AMD Phneom II X6 1055T
    RAM: 2 x Crucial DDR3 1333MHz 8GB REG/ECC
    PSU: Fractal Design Newton R2 1000W PSU
    GPU: Asus GeForce EN8600GT Silent/HTDP 512MB
    I start the sytem and get 3 distinctive beeps from the speaker and error post code 54
    I have tried the following:
    1. Remove one RAM stick and start the system with just one RAM stick in slot DIMM1. Result: Same error codes, 3 beeps and post code 54
    2. Removed the RAM sticks completely (in hope to get an error code indicating RAM is missing). Result: Same error codes, 3 beeps and post code 54
    3. Switching the RAM sticks (DIMM1 <-> DIMM2). Result: Same error codes, 3 beeps and post code 54
    4. Tried the processor on another board (ASUS) that I know works. The processor runs fine on the ASUS board.
    5. Activated the "Easy Button 3" Reset button. Result: Same error codes, 3 beeps and post code 54
    6. Activated the CL_CMOS button at the Back Panel. Result Same error codes, 3 beeps and post code 54
    7. Clear Data position of Clear CMOS Jumper JBAT1 (with power disconnected),  and the back to Keep data position. Result: Same error codes, 3 beeps and post code 54
    All fans are working OK. Everything seems to be correctly connected after double checks.
    Is there anything else I can do, without returning the MOBO to shop?  I guess I can not update the BIOS if I do not get passed the post?
    Anything else that can be wrong?
    I am greatful for any initiated help.
    /Phil

    Quote from: philip on 26-March-12, 00:41:13
    No, I have not tried to boot the MOBO outside of the case. However I have come a little bit further:
    I bought a less expensive memory stick of just 2GB; Kingston RMD3-1333/2G and put this in the DIMM1 slot.
    With this memory the PC booted and completed the POST. This allowed me to download and flash the latest BIOS; 7640vB8 from MSI.
    I then turned off the PC and re-installed the 8GB Drucial memory stick in DIMM1. I then got the original problem back.
    My conclusion is that the 8GB memory from Crucial is not compatible with the MSI 990FXA-GD80 board and the Phenom II X6 processor.
    If anyone have any idea how I could get my memories from Crucial to work on the MOBO I would be grateful. I have paid dearly for them.
    Just saw this:
    Quote
    RAM: 2 x Crucial DDR3 1333MHz 8GB REG/ECC
    you are using the wrong memory type.
    you need to use no REG/no ECC memory

  • MSI 990FXA-GD80 - SATA connector 5-6 not seen by Linux kernel

    M-Board: MSI 990FXA-GD80  (UEFI BIOS with factory version E7640 AMSB50, indicated by green label on BIOS chip)
    CPU: AMD Phneom II X6 1055T
    RAM: 2 x Crucial DDR3 1333MHz 8GB REG/ECC
    PSU: Fractal Design Newton R2 1000W PSU
    GPU: Asus GeForce EN8600GT Silent/HTDP 512MB
    Operating system Linux / kernel 2.6.39-r2
    I am in the final stages of providing my new MSI 990FXA-GD80, Socket-AM3+ with all its peripherals.
    I have a working main disk with a Linux/Gentoo installation, connected to SATA baoad connector 1 (the disk shows up as sda1) . Now I have added 4 other disks, all for storage purposes.
    The disks connected to SATA board connector 2-4 works OK. However, when I connect the 5th disk to SATA connector number 5 it is not seen by the Linux kernel. It is not seen in connector number 6 either. I have checked that the disk itself and its SATA cable is OK by connecting it to SATA connector number 4 (temporarily disconnecting one of the working disks). And it is recognized there and works OK. So there is no faults in the disk and its cable.
    What can be the problem? Is there a different SATA controller for connector 5-6 than for connector 1-4? Do I have to enable a different supporting module in the Linux kernel for SATA connector 5-6, than for connector 1-4?
     

    Quote
    However, when I connect the 5th disk to SATA connector number 5 it is not seen by the Linux kernel. It is not seen in connector number 6 either.
    Do the drives show up anywhere else (UEFI/BIOS Setup, Boot Order etc.)?

  • MSI 990FXA-GD80 THX audio Driver Problems...

    Hi...
    Sorry about my Bad English...
    Last week I bought MSI 990FXA-GD80 mainboards..
    But I found a problem when I'm installing it's THX audio driver..
    Here a message : "there is no supported audio device"
    screenshot :
    I have try to download a new version from MSI's website but there's no solving my problems..
    So what must I do?
    Thanks for help..

    Quote
    UEFI/BIOS version is original.. or how I cant check it?
    Check in UEFI/BIOS Setup. It should be mentioned under "System Information" somewhere.
    Quote
    All drivers versions is originally from CD drivers that come with it's mainboard.
    Use the latest Realtek HD Audio driver: http://www.realtek.com/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false
    ... and the latest THX TruStudio Pro installer: https://forum-en.msi.com/moderator/pics/svet/THXTruStudioPRO.rar

  • MSI 990fxa-gd80 PROBLEMS

    Never in my life I have seen a more unstable motherboard....
    Here is my configuration (the system is new, assembled yesterday):
    Cpu: AMD FX 8350
    MB: MSI 990fxa-gd80 (bios verison:13.2)
    Memory: Corsair vengeance 8x2GB 1866
    SSD: OCZ vector 128 GB
    Power: Seasonic 850 Bronze
    System: Windows 7 Ultimate 64
    I need some help with the following problems if there is someone kind enough to help me:
    1. after a minute or 2 bios freezes (I think I managed to solve this by setting the correct speed for ddram; initially it's 1333 and I set it to 1866)
    2. Now the windows sees the 16 GB of ram but only uses 8 GB: 16.0 GB (7.95 GB usable); If I set the memory speed to 1333, the windows uses all memory but the computer resets after a few minutes in windows and the bios freezes the same. And after reset it doesn't boot anymore... I have to clear CMOS to make it boot again
    3. sometimes after a freeze, I reset and all kinds of artifacts appear on the screen, and the system is not booting
    Does someone have any idea about these problems ? Have anybody experienced something like this ?
    Thanks in advance for your help.

    Quote from: DSpawn on 04-September-13, 21:24:51
    Memory: Corsair vengeance 8x2GB 1866
    Are you sure? All my 990FXA-GD80-Boards have only four DDR3-Slots, not eight...
    What happens, when you run the system with only one RAM-module? Check the one module first and the second module later.

  • MSI 990FXA GD80 audio help

    Hello I'm sorry if this has been mentioned before but i was hoping anyone with a MSI 990FXA GD80 could help me out please, i am having audio problems with my new motherboard when play a video or some music if i open msi control centre or scan for hardware changes in device manager i get terrible sound distortion, i think its happening because my bios is being scanned but this is the first motherboard its happened to me on, could anyone else with a MSI 990FXA GD80 play a video or some music and scan for hardware changes in device manger while its playing to see if it happens to you, thank you for any help.
    p.s i am using the latest v11.5 bios and on-board audio, my CPU is overclocked to 4GHz but it still happens on default settings, thanks again.

    Quote from: BR4DDERS on 30-September-11, 09:57:21
    Hello i have finally fixed my audio problem i use a wireless usb adapter for the internet so i disabled the onboard LAN controller in bios, i disabled it before i even installed windows so i didn't have any drivers for it,
    anyway i have it enabled now my overclocks applied an no audio problems what soever. Uncleblitz check to see if you have you're onboard LAN controller disabled.
    thanks for all the help guys
    [update]
    I just tried control center and it still does it, i checked it by scanning for new hardware in device manager because it was quicker to open it doesn't do it there anymore just in control center, so its half fixed
    ...

  • MSI 990FXA-GD80 black screen

    Hello there
    Specs:
    What I had:
    AMD Phenom II X4 955 Black Edition
    GIGABYTE GA-880GA-UD3H
    XFX Radeon HD 6970 2GB GDDR5
    Corsair Vengeance DDR3 1600MHz 16GB CL9
    Western Digital Caviar® Black 1TB
    2x Western Digital Caviar Green WD10EADS 1TB
    OCZ SSD Vertex 4 Series 2.5" 128GB
    My computer suddenly crashed with a BSOD while surfing the web. When it restarted I got past the usual Gigabyte screen - followed by a black screen telling me "Beginning to update backup BIOS ---- Updating " then it restarted again, going into a loop with the same thing happening again and again.
    So I figured that the motherboard had crashed, so I bought:
    MSI 990FXA-GD80
    Thinking that would solve the problem.
    I rebuild my computer today with the new motherboard, plugged everything and was ready to go-
    The first message I got was telling me that my cpu or my ram was changed, and gave me the option to either 1- enter BIOS or 2- boot with default values.
    I entered BIOS, checked that everything was OK, saved and rebooted... Got past the MSI-screen - followed by a black screen telling me "NTLDR is missing, press CTRL+ALT+DELETE to restart", which I did.
    My comp then rebooted, but this time both my screens stayed black :O
    I have now tried to restart my computer several times, but my screens stay black.
    My monitors are plugged in with DVI and HDMI.
    Solutions I have tried:
    Removing the motherboard battery. and starting without it.
    changing to my old graphic card, ATI Radeon 5830.
    Removing the power for 15 mins.
    Unplugging all the hard drives, except the SSD. (which my OS is installed at).
    I have now also ordered AMD FX-8150 8-Core Processor.

    Quote
    "NTLDR is missing, press CTRL+ALT+DELETE to restart",
    Did you use the ame HDD for boot without re-installing the OSD ?
    This could be a case of having an AHCI mode OS HDD and your current board is still set to IDE ?
    That X4 955 only supports 1066 or 1333 memory.
    Borrow the other PSU. Insert only one RAM module.
    Do a full CMOS clear.
    Retest and do a fresh OS installation and all curent drivers.

  • MSI 990FXA-GD80 / MSI Radeon ATI HD 7870 Hawk / Phanteks combo.

    Hi
    I am in the process of building a new system but have, potentially, run into some problems.
    The motherboard I am looking to buy is the “MSI 990FXA-GD80” and the graphics card is the “MSI Radeon ATI HD 7870 Hawk”, processor  FX-8350.
    Now to my question/possible problem.
    I am looking to buy a third party cooler from Phanteks, the “Phanteks PH-TC14P-RD”.
    I know that it will be a tight fit between the cooler and the graphics card normally, and since the Hawk has the “GPU reactor” (which builds the height of the card) my concern is that it would interfer with the Phanteks making it impossible for me to install the video card using the Phanteks.
    I was wondering if this combo would work or not, prior to registering here I Googled searched like crazy but came up with nothing.
    I would really appreciate some help.
    Best regards.
    Eric

    Since that board has two PCI-E slots with 16 lanes you wouldn't have to use the first slot so reactor is not the real issue. The VRM cooler of the board could be more troublesome as the cooler has two towers and two fans.
    However I found somone listing a combo with the cooler and a 990FXA-GD65 which should have a vrm cooler of the same height.
    http://hardware.forumsee.com/a/m/s/p12-31595-036007--first-overclock-questions-and-concerns.html
    http://www.msi.com/product/mb/990FXA-GD65.html

Maybe you are looking for