Better hardware configuration for using JDeveloper

Hi,
What is the better configuration for using such since every time I felt absolutely slow when using it?
Thks & Rgds,
HuaMin

HuaMin,
Kind of hard to say what's better, since you don't tell us what you currently have. However, I find that RAM is your friend when running JDeveloper. I've run JDeveloper 10.1.3.x on various laptops (both single and dual core) with 2GB of RAM and performance is quite good. The CPU speeds that I've used are generally in the 2GHz range. My current setup is a dual core 2 GHZ with 2 GB of RAM and I'm quite happy
John

Similar Messages

Hardware configuration for BI 7 Cleint

Hi All,
What is the minimum hardware configuration for BI 7 Client installation?
user will use a BEx for the report analysis
Regards,
Godhuli

Hi ,
The note is currently for internal checking as it has undergone some internal checking.I am just pasting the note info in this reply.
The Business Explorer of SAP NetWeaver 2004s is supported for the Win XP and win2000 platforms. The hardware and software requirements under the different platforms are given below.
software requirement for Windows XP
   OS    : Windows XP
   Browser : IE 6.0
   Excel : 2002 and 2003
software requirement for Windows 2000
   OS    : Windows 2000
   Browser : IE 6.0
   Excel : 2002 and 2003
.Net Framework version 1.1 is a pre-requisite for the Business Explorer of SAP NetWeaver 2004s in both the platforms. It's a freeware, which can be downloaded from the Microsoft site.
Older versions of Microsoft Excel, for example Microsoft Excel 97 and 2000, are not supported. On the browser side Firefox is not supported at present.
Hardware used in this case is Pentium 4, 2.8 GHz,1 GB memory and 40 GB HDD. The Hard disk space and Min and recommended Memory usage for the Business Explorer of SAP NetWeaver 2004s is mentioned below
    HDD Space   : 380 MB
    Memory Min : 384 MB
    Recommended : 512 MB
Note: The actual memory used under Windows XP platform is 146 MB.The amount of memory used by OS before SAP GUI installation is 137 MB The amount of memory used by OS after SAP GUI installation is 283 MB
(256 MB is still sufficient for XP, but sometimes when SAP GUI is executed the system may start swapping)
you can also check service.sap.com/bi->Product Information SAP NetWeaver 7.0 - BI
Best Regards
Manoj Kumar

Need hardware configuration for server

Hi All,
Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
Thanks,
ATRSAMS

Hi Atrsams,
According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
Regards,
Charlie Liao
TechNet Community Support

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Hardware requirements for using BI-IP

Hello experts,
i would like to have something like a how to paper in which i can find something about the hardware requirements for ideal using of BI integrated planning. Can anyone give me a help?
Thanks in advance.
Best Regards,
Ali

HI Ali,
I have been unable to find specific hardware requirements for using BI -IP so I would refer you to the hardware requirements for running Bi as per notes:
1013139 - prereqs for frontend bi7
1013201 - Hardware and Software requirement for BI Standalone frontend
and please also review the IP note:
1056259 - Collective note: Performance of BI planning
I hope this helps
best regards
Orla.

A reasonable hardware configuration for Linux OAS

Has anyone out there tried to run
Oracle 8 for Linux and OAS 3.02
all on the same toasted PC/pentium server?
Could you tell me the nature of your
hardware configuration (processor speed, ram, etc)
if you feel the performance is acceptable for
development (not for actual business operation).
The technical FAQ lists 48 megs and any
Pentium to run Oracle 8 for Linux which
verges on ridiculously low.
I just want to know a reasonable
configuration to run both Oracle 8 and OAS .
Thanks,
Heji
null

I have been runnig OAS/O8 on a Pii/300Mhz system with 128mb of
ram, and so far I have no real complaints on speed. I even tuned
the SGA to give a little better performance and still have around
40 or so MB free. BTW, I haven't really tried to mess around
with the Linux version of OAS, but have used the Solaris version
previously, have you noticed any problems with the wrb starting
up? I have seen some error messages saying "No processes..." or
something, looks like an error.. have you experienced this?
Tom Tyson
mark theodoras (guest) wrote:
: Heji (guest) wrote:
: : The technical FAQ lists 48 megs and any
: : Pentium to run Oracle 8 for Linux which
: : verges on ridiculously low.
: The install guide says 32M minimum for O8. I'm not sure with
: OAS. Given (pc) memory is cheap, I am running O8/OAS3 with
128M,
: with no complaints.
: Given laptop memory is not so cheap, are there folks running O8
: and OAS3 with 48, 40, or less ram ????
: I can second any pentium would suffice. I am using P133 & P166
: systems, and the CPU is NOT the bottleneck.
: Mark
null

Hardware configuration for 5.5

Hello Everyone!
I am a total newbie......
Anyway, I just purchased a new computer. Although many of you would laugh at what I bought, it was all I could afford. There are some good things about it and some probably not. My question is, I bought a 1.5 Tb hard drive (only 1) and I am wondering what is the best configuration for it? Should I partition it, etc.
As I said, I am a total newb at this and I am just beginning so I will not be making re-editing any motion pictures anytime soon but just taking old 8mm family stuff and working with this as my practice stage.
Thanks,
-myParkster

NEVER EVER do a partition !!!
Read http://forums.adobe.com/thread/650708?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Recommended Hardware configuration for VS

I was looking at how to improve the performance of my development PC and checked out the VS Virtual Machines on Azure. I noticed two main points,
1) they all seem to have a second drive that appears to be just for the swapfile/temporary files
2) they seem to use Windows Server 2012 as the OS
I also saw some recommendations for using SSD's for the main OS drive.
What are the recommended/optimal configurations? Are the advantages/disadvantages documented anywhere?
I can sort of see why (1) would help as my PC seems to be disk-bound but not sure whether (2) is significant or just to allow for SQL server development or something?
Also if I where to use an SSD is there an easy way to move all the appdata, temporary and other frequently written areas to a second conventional HDD?

Hello Terry,
SSD will increate performace when reading/writing files so you will benefit from this if you use it and do some IO operations. However I think Visual Studio performance do not just rely on this, the build process of Visual Studio is also related to other
of your hardware. It is hard to say how the performance will raise since it depends on so many things.
I will recommend you do this: If you don't need to read or write a project too offten, you can keep it in HDD. If you always use one project and want to increate the performance, please set this project in SSD.
For the appdata and temporary files, I cannot see them from VS settings, maybe you cannot modify them. But if you choose to install VS in SSD, I believe the performance will be better when read/write files.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Specific Hardware Configuration for a new ATG Project

Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.

Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ???

What is the Best Configuration for using SSD & HDD Internal Drives in iMac?

Hi,
I have a Refurbished 2011 21.5" iMac. It came with a 1TB HDD. I had a 120GB SSD custom installed by Other World Computing. I would like to reap the speed benefits of having the OS and applications reside on the SSD and having most of my heavy, frequently used data on the HDD. I've considered simply going the route of changing the advanced settings of my user configuration so that my home directory is located on the HDD. I've read this is an ok solution, but that there may be better ways to do this to get the best out of the available speed of the SSD. Could anyone recommend better options?
For reference, I use apps like Photoshop Lightroom, the NIK suite of photo editing applications and Photoshop CS6 pretty heavily. I don't do much movie editing or production...only occasional slideshows in iMovie...although I do keep a lot of old, imported, video footage of my kids on my HDD and on my backup system.
Thanks,
Ben Shugart

Start with the only Apple doc I could find: http://support.apple.com/kb/ht5446. They tout the technology, but don't provide much in terms of help.

Hardware Configurations for Oracle 10g AS

Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RK

Those parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support.

Hardware platform for running JDeveloper

Hi,
I'm running JDeveloper version 10.1.3.0.4 on an intel p4 2.8 ghz with 1.2 gigs of ram.
I'm wondering if this is enough "horsepower" to use JDeveloper effectively.
I'd like to hear from fellow developers on what their system specs are with relation to cpu and ram.

Hi, according to the installation guide , these are
the recommended hardware requirements:
Windows
Windows 2000-Service Pack 4
Windows NT-Service Pack 6a
Windows XP-Service Pack 2
CPU Type and Speed
Pentium IV 2 GHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
Base Installation: 375 MB
Complete Installation: 500 MB
Java SDK Sun J2SE 1.5.0_05 for Windows, available at: http://www.javasoft.com.
Linux
Distribution
Red Hat Enterprise Linux 3.0
CPU Type and Speed
Pentium IV 2 GHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
Base Installation: 375 MB
Complete Installation: 500 MB
Java SDK
Sun J2SE 1.5.0_05 for Linux, available at: http://www.javasoft.com.
===============================
You can check this documentation under
$JDEV_HOME\jdev directory.
Regards,
Luis.

Best Hardware Configuration for oracle RAC

Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AM

aram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers

Your Hardware configuration for RAC.

Hi,
What would be the best hardware solution for your regarding RAC? or put in another way, what hardware configuraton you are using for your RAC?
regards,

hi
As good as you could provide for your RAC. RAC could be built on simple
P IV machines having a shared storage and two NICs with 100Mb speed connected via low speed network.
If i would be using a 2 node RAC, i would use two 64-bit server class machines with 4G RAM each, high speed shared storage, and Nodes connected through GB speed NICs with fiber optics.
It would really give me a lot of satisfaction.
Regards

Is there a plan to update Configurator for use with InDesign CC?

Hi all,
When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
Thank you so much:)
Christine

shane.daley wrote:
I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
Is there a plan to fix this please?!
Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

Better hardware configuration for using JDeveloper

Similar Messages

Maybe you are looking for