Better solution for Delivering messages

Hello All,
In our prod environment, We observe quite often, when ever there is an issue at target side ,messages are failing and status in NDLV state in Adapter Engine ,apart from this NDLV state ,we observe few messages in Delivering state.
When the issue at target side get resolved.we are restarting NDLV (system error state ) messages from Adapter engine in RWB.
In order to process the Delivering messages ,we are restarting the message system to make the delivering messages to NDLV state.then we reprocessing those messages.
Because of this Messaging system restart to resolve the issue ,few more messsages failing during that time.
So for reprocessing the Delivering state message,Is there any possible way to handle this apart from restarting Messaging system.
Please provide inputs on this
Thanks and Regards,
Vidya Sagar

I dont think with out the restart of the java stack DLNG messages will get cleared off..
options you can look for is possiblity of the target system maintenance schedule in advance and disable the particular channel
which will not work for hard shutdowns of target systems..i.e immediate shutdown cases..
Increase the no of threads for particular adapter queues..you can increase the thread count for the adapters based on the factors provided by the sap..which will not result in To be delivered messages..
HTH
Rajesh

Similar Messages

How can i get a solution for this message "Your Apple ID has been disabled"?

How can i get a solution for this message "Your Apple ID has been disabled"?

Contact iTunes Store support. That message can mean one of several things:
Your credit card on file has expired
The credit card issuer has denied a charge
Your account has been hacked
Key information in your account has changed, and Apple needs to contact you to confirm the change.

Old table style that i'm surprised Indesign doesnt have a better solution for

Hey guys, I had a question about indesign tables. In one publication I am working in, the client has expressed a desire for table to be done the way they always did them which is the following.
When the table is first being introduced to the reader (that is when it starts) it has a .75 stroke above. however if the header row occurs on any succeding pages, then that stroke should be .25 like any other strokes that may occur on the table (like at the bottom, or the line under the headers.
This is so simple but right now it has me stumped. Is there any way to do this in an easier fashion than having to convert the header to a body row recreate or fake the header row by putting it into the regular flow of rows? Thanks all!

Yeah, that's what I'm saying: you can't just apply a stroke to the top of a frame, and if your objects aren't anchored then you risk the possibility of a number of lines randomly floating around. The whole point of anchored objects is to anchor them to a particular point in the text, so when they text reflows they follow along. So: use the pen tool to draw your line, copy it to your clipboard, create an anchored object, manipulate it until it's sitting exactly where you want it, and paste your new rule in.
Positioning anchored objects precisely works well once you understand the interface, but the first time out I found it really confusing, hence my link to the help file entry on anchored objects.
There may well be a better solution for your issue, but this duct tape is what came immediately to mind.

I want better solution for adjusting the Material stock values for the last

my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599    QTY : 10181.03 Ltrs
Material 2 : RS: 1318596     QTY: 2152.76   Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c                      Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

TA20920 Mac original is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message

i got Mac originally version is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message

This message?
http://support.apple.com/kb/TA20920
is a difficult one to resolve.
There is an analysis and suggestions to this problem posted here.
http://www.thexlab.com/faqs/kernelpanics.html

Better solution for scaling of value

Hi,
We have a requirement of scaling the values retrieved in reports, We had two solutions,
1) Use EvGTS function to scale vale
2) Use Excel functionality to scale the value
Please let us know which is a better solution.
Thanks & Regards,
Ramanathan

Hi Ramanathan,
You can use EvGTS function, because it retrieves the data and also scales the values.
Regards,
Raghu

Want better Solution for Migration?

Hi I am Madhavan
I Need some guidelines to have a better migration solution.
We have oracle financials running on Windows NT platform. For
application side we are using smart client and oracle 7 as the
database. How to upgrade and migrate the entire system ,keeping
cost in mind.
Thank You
Madhavan.S
null

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

Any better solution for this ?

public static void main (String args [])
     for (int row = 1; row <= 5; row++)
          for (int col1 = 4; col1 >= row; col1--)
               System.out.print(" ");
          for (int col2 = row*2; col2 > 1; col2--)
               System.out.print("*");
          System.out.println();
     for (int row = 1; row <= 4; row++)
          for (int col1 = 1; col1 <= row; col1++)
               System.out.print(" ");
          for (int col2 = 4; col2 >= row; col2--)
               System.out.print("*");
          for (int col3 = row; col3 < 4; col3++)
               System.out.print("*");
          System.out.println();
}I'm trying to make this:
I think that my solution is too long. any shorter solution?
TQ

It IS hardwired to produce that figure and only that figure.
What if they asked you to redo it with fewer or more rows of stars?
You did a "bad" thing: you hardwired your loop sizes. Something like "i <= 4" is called a "magic number", because someone reading your code would have no idea where the 4 came from.
You also have 4 appear in several places. That violates the Don't Repeat Yourself rule. If you have to change it, and forget one of the spots, your code is wrong.
You can help both situations by defining a well-named constant and using that for the loop upper limit:
public class DiamondsAreAGirlsBestFriend
   public static final int DIAMOND_SIZE = 4;
   public static void main(String [] args)
      for (int row = 0; row <= DIAMOND_SIZE; ++row)
      // and so on
}Also, better to put this into a method that would take in a diamond size value and return a String. Then it's general.
None of this is very important for this trivial problem, but they might be worth remembering when you start writing more complex programs.
%

Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Solution for Error Message 2122!?

Hi everyone,
I've been reading all your posts about error message 2122 and so far nothing has worked. Someone mentioned looking at the compatability tab and after playing around with it, it worked! Here's what I did...
Right click on the iTunes logo on your desktop and choose the compatibility tab. I am running Windows XP, so in the first box, for compatibilty mode, I chose to run as Windows 2000.
Click OK
Cd burn worked fine!
Let me know if anyone else has success with this.
Emzy xx
Windows XP

Go to: http://club.aopen.com.tw/faq/
In the search field in the upper left hand corner of the page, type 2122 then click the magnifying glass (hitting Return may not work).
Click on the single result called 'My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".'
This is what you get:
"Q7374: My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".
We are sorry to inform you that currently iTune v6 doesn't support these two DVD ReWriters, DUW1608 ARR and DUW1616 ARR.
Last Updated : Jan. 16, 2006"
Sorry for the bad news.

Better approach for storing Messages ?

Hello all,
I am developing a Email module which does resembles yahoo or hotmail.
To my understanding POP3 dosn't support Folder creation and IMAP does. But, i have to go for POP3 only.
SO, i thought that i have to go for storing it in database(Message Object) as Byte array.
so, i have created sent fodler, save folder, draft and custom folders all in database for storing all this message as javax.mail.Message object.
Since i can't store Message object i have created a wraper class which implemets serialization.
Now my questions is
1. is my approach for folder with database is correct ?
2. if yes, then is it good to store Wraper class as a hole in database. or can i go for divinding the message into parts and store invidualy in database.
3. if my approach is wrong then how can i go about ?
awaiting for everybody's reply
dina

When through your thinking before :)
The correct way is to save Message object to disk, i.e cache so we
don't read from server. To save to database is your choice but it's
extra overhead. And if you intend client is going to install the
program on their desktop, database is out of the question.
The secret is making a simple database design as explain below, like
Microsoft outlook.pst or look at Netscape cache folders to see their
design too. Similar...
Message object is not savable, i.e not implemting serialization but
their is a way to save the mail messages to disk.
We use the writeTo method of MimeMessage class to save the whole
email, including attachments as one whole object stream.
I use one file for each mail folder, like Microsoft and Netscape does..
The reason is we might want to copy the whole inbox, which in effect
is copying the one file to another folder for backup etc...
Same reason for compressions
So you might ask, one file, that inefficient isn't it?
Not really it's how you design it.
Your mail file should have lookup keys of message id's of your message
objects. Hence, with message id in a file one can get the ObjectOutputStream in a file with a simple lookup. We use object output
stream as message class writeTo, writes to output stream, and using
ObjectOutputStream to store and retrieve makes a whole lot of sense.
The cahce mail storage should be using a RandomAccessFile and their
are package classes you can download from JavaWorld to have access
to writing and reading object streams from a file using the random
access file. So no need to worry about database as it does the
hard work for you. Search for RandomAccessFile in JavaWorld and
dowload that package.
RandomeAccessFile class is quite differently to other IO classes as
it does fast seeking, i.e the file points to different positions of
the file very quickly. Even if you inbox file is 70 megs big, it can
still handle it very quickly.
This should help you clear most of the design problems that I also
ponder for quite some time

Want a better solution for radiobutton code

I am using radio buttons the code works but it seems very long winded any ideas how I can cut down the code?
// code snippet
//basicly decare some JRadioButton
//set action command
currentaccount = new JRadioButton("Current Account");
currentaccount.setMnemonic(KeyEvent.VK_C);
currentaccount.setSelected(true);
currentaccount.setActionCommand(currentACString);
panelRadioButtonAC.add(currentaccount);
savingaccount = new JRadioButton("Saving Account");
// Group the radio buttons.
ButtonGroup group = new ButtonGroup();
group.add(currentaccount);
group.add(savingaccount);
// Register a listener for the radio buttons.
RadioListener myListener = new RadioListener();
currentaccount.addActionListener(myListener);
currentaccount.addActionListener(myListener);
//here is the code check which is very long winded
/* I am checking each radiobutton and then determining if it is true, since I have used a button group isn't there a way I can find out which is chosen????
/** Listens to the radio buttons. */
class RadioListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
if ( e.getActionCommand().equals("Current Account") )
{ curAC = true;
savAC = false;
if( e.getActionCommand().equals("Saving Account") )
{ savAC = true;
debAC = false;
Please help

See my answer in
http://forum.java.sun.com/thread.jsp?forum=54&thread=196354
... and please don't post a question 20 times...
Doug

Better solution for Notes calendar synchronization...

Hi,
I have a 6233 with all the problems described in this forum when synchronizing repeating calendar invitations etc.
This annoys me a lot .... I want to forget about Nokia PC Suite.
Are there people who are using other products for Notes synchronization to 6233 or similar phones? Please share your experiences .....
Thanks, Menno.

Antonio Conte wrote:
On My Mac, I went to iCloud in System Prefs, I entered my iTunes email and password, and let it do the rest itself, I didn't change anything else, I notied that Mail & Notes wasn't sync'd by default.
What do you mean "let it do the rest itself"? Did you browse to mobileme.com and go throught the process of upgrading from MobileMe to iCloud?

Better solution for Photoshop CC update error U44M1P34

How can I fix Photoshop CC update error U44M1P34 without uninstalling ALL OF MY ADOBE PRODUCTS !?

Hello. I'm having the same problem to install the update Photoshop and Bridge.
The error is U44M1P34 and I've done the procedure of uninstalling and reinstalling the Adobe applications. It did not work.
I suspect that is because I use Windows 8 in Brazilian Portuguese, which makes the Program Files directory call up Arquivos de Programas. I suspect that the application of the CC does not recognize the name.
Please, help me find a solution.
Thanks

Plz if there is no solution for retry message while refresh tell me plz

hi guys
iam trying to refresh a main page from a popup window after editing things in it like on clicking a button i want to retrieve to session bean some values : getSessionBean1().SetCacheValue("EmpCheck","1");
getSessionBean1().SetCacheValue("CompanyCheck","0");
also i used js to close the popup and refresh the parent window :
opener.location.reload(true); self.close();
so iam having the retry or cancel alert and it its very noisy
do anyone know how to stop this alert and refreshing the page without is please help guys
~HR~
thanks a lot for help

the page you're trying to reload is a result of POST request with some data submitted from some form. The reload would generate new POST request with exactly the same data. If the form is on the same page that needs to be reloaded then instead of reload you can just re-submit the form:
window.opener.document.forms["the_name_of_the_form>"].submit()
Of course it will not be an exact replica of original POST if you edited some data in the form - obviously new data will be submitted.

Better solution for Delivering messages

Similar Messages

Maybe you are looking for