Better sound with 1.1.1.?
Did Apple changed the sound characteristics with this new version 1.1.1.
as in better with more dynamic range.
Because I heard they did...
iMac intel 20" Mac OS X (10.4.5)
The sound quality was not improved. What was added was a selection on your IPOD to limit the amount of volume that your IPOD can put out to your headset. This user adjustable limitation was added to help those that have a tendency to turn the IPOD too loud and thus cause hearing damage.
Apple did this to avoid potential lawsuits in the future over people suing Apple because their IPODs caused them to have hearing loss. This is just one more step that Apple did to try to convince courts that they are doing all they can possibly do to protect its users from themselves.
smile
Similar Messages
-
Hi Guys, I want to buy some mini portable speakers for my iPad 2 so I can watch movies with better sound. Any ideas in what ones to buy?
Here's the one I love, the Altec Lansing iM 237. Don't be put off by the small size or cheap price. I have two, one for home and one for my studio/travel.
http://www.amazon.com/Altec-Lansing-Ultraportable-Speaker-Players/dp/B001ELK2NY/ ref=sr_1_1?ie=UTF8&qid=1303595370&sr=8-1 -
Best Bit Rate for Better sound
I’m new to the iTunes/iPod thing. A friend told me that he re-sets the bit rate from the default of 128 kpbs to the top of 320 kbps for better quality. [He plays everything off of his computer which is wired to speakers throughout his house and does not travel or drive much so hardly uses his iPod.] I played around a tad with the various rates on the same album and found that a fairly short one used 34.9 MB at 128 kbps, 52.1 MB at 192 kbps, 60.8 MB at 224 kbps and 86.6 MB at 340 kbps. Another friend told me that he noticed a big difference when he played a song off his iPod through his several thousand dollar system if it was imported at 128 kbps. While hard disc space is cheap and I would simply opt for the higher quality setting, the iPods are not so big when one almost triples the file size.
I tried to figure out what the max bit rates in the CDs are so that could guide the max import rate, but I could not and that question may make no sense at all anyway.
What is the max that a human can notice the difference at and what have folks found to be the best balance between sound quality and storage space?
Thanks for your help.
PC Windows XPMonty, this is really going to be up to your ears to decide. All I can tell you is my experience during the 2+ years of owning an iPod. I initially thought AAC @ 128 was satisfactory. I then started experimenting with various bitrates, but kept the AAC format. I decided that 192 was a discernible improvement over the 128. Not to go into a lot of detail, but I, quite by accident, had one album download at 256 & thought, "Wow, this is unbelievably better sound, even over inexpensive computer speakers." At that point, I started importing everything in AAC @ 256 VBR which I feel is pretty darn close to CD quality sound. I have a 60GB iPod that I'm willing to sacrifice some capacity in order to ensure the best audio quality I can. This is also why I do not buy frequently from the iTunes store as I do not feel the 128 downloads are the best quality. I buy & my own CD's, now, to insure good quality. I will by the occasional song from the store when I do not care to buy the whole CD. Hope this helps!
-
Just bought a new Samsung 65 LED HDTV. I am somwhat hearing impaired. Tried to use the setting "clear listening" and the "amplified" sound settings under tools. Best I can determine, I can't have both at once. Also, didn't find a place where I hit "apply" or something like that. Couldn't hear any difference in either setting, if I was actually getting to them. Am I missing something here? Also, thought I might improve the sound with added speakers. I'm considering the HW-D450 TV speakers. Don't find in the directions with TV how to do this. I see only a couple of USB ports and a cable connection. Don't see too well either so don't find anything like "audio out". Would these speakers make for better sound and will they plug into my new TV?
Lootas1 wrote:
Just bought a new Samsung 65 LED HDTV. I am somwhat hearing impaired. Tried to use the setting "clear listening" and the "amplified" sound settings under tools. Best I can determine, I can't have both at once. Also, didn't find a place where I hit "apply" or something like that. Couldn't hear any difference in either setting, if I was actually getting to them. Am I missing something here? Also, thought I might improve the sound with added speakers. I'm considering the HW-D450 TV speakers. Don't find in the directions with TV how to do this. I see only a couple of USB ports and a cable connection. Don't see too well either so don't find anything like "audio out". Would these speakers make for better sound and will they plug into my new TV?
Have you thought about wireless headphones? -
Better Integration with Audition
I'd like to see better integration with Audition. How about being able to use Place to open a sound clip and place it in a multitrack session? Just like when using InDesign, the cursor would change to show a "loaded" state and the clip would be inserted wherever I place my cursor.
Maybe it will be seen, maybe it won't. The only way to be sure your suggestion is received by the Motion development team is to use the FEEDBACK section in the Motion menu.
Menu Bar>Motion>Provide Motion Feedback. When the webpage opens, select Motion from the software list.
Of course, you need to be connected to the internet.
Good luck.
x -
Dont use CMSS 3D Sound with reg 2.1 speake
Hey everyone i've been tryin to get the best sound with my x-fi music. Now i've been reading on the creative site that CMSS 3D is used for makin the sound come through multiple speakers so it makes it sound like its all around you. But thing is i only have 2 speakers so whast the point, i should turn this option off and maybe turn it on when i use headphone or upgrade to 5. correct?
This is a real necro, but I think today we have better "understanding" what CMSS does.
With external, non-headphone 2.0/2. speakers the CMSS-3D is in "CMSS-3D Virtual" -mode. It's like CMSS-3D Headphones mode, it tries to give surround sound from 5. (or whatever surround signal) and play some of the information through 2.0/2. speakers.
This is near impossiblef feat, but by modifying some of the sound signal coming from the 2.0 speakers it may give information about rearward sounds and other spatial effects. It's still something you can use if you are listening to surround source, but only have 2.0 speakers. It for example allows to listen to Dolby Digital 5. track from a DVD even when you have only 2 speakers.
When you have 2.0 source and surround speaker set (5./7.) then CMSS-3D is different mode, and yet another mode is CMSS-3D Headphones and surround source. The mixing can be up or downmixing: 2.0->5. (real) or 5.(source)->2.0 headphones/speakers mapping. And different combinations of this.
Recommended setting is what pleases you. I personallly use CMSS-3D Headphones for gaming (if using headphones) and I use CMSS-3D (5.) Stereo Expand on when watching TV. For 2.0 music I may use Expand or Surround, or have it off, depending. For movies I use 5. direct, no modify.
But (almost) always have the sound card speakers set what you have for real. -
Is there a solution to getting sounds with safari notifications?
Hi,
I noticed that I didn't get sounds with Safari notifications, even after checking the settings.
So, I took it to the 'Genius' bar, and they said it was a know issue with OS 10.3. It will be sorted with OS 10.4.
Well, I have just updated to 10.4, and no joy!
Why? I have selected a suitable sound in sound preferences.
I have selected 'Alerts' in the nofications preferences for safari.
I have ticked the play sounds box.
Why doesn't this work?
Thanks
JeremyRight, I've done a restore and ejected the phone. Now it's giving me only two options: either set up as a new phone, or restore from iTunes backup (I don't use Cloud). It's not giving me a sync option so I guess I'll have to restore, unless anyone has any better suggestions?
-
Because I'm having the same problem, I've seen lots of posts on the issue of not having sound when playing some .avi files in QT (Pro) 7.0.4. I got Pro to be able to convert movies to the iPod video format and was REALLY frustrated and upset that it didn't work. Apple should really work on this version to allow it to play mp3 sound with variable bit rates (which I think is what another post said was causing the problem). If WMP can figure it out, Apple should or else they're just losing their edge (totally saying this to try to get some Apple person angry enough to fix it). In any case, I tried a bunch of different things and nothing worked. VideoDub won't work because for some reason the Video for Windows codec I downloaded and installed isn't being recognized. I also downloaded a trial version of a converter created specifically for this purpose(made by Cucusoft), but I keep getting error messages and installing their codecs doesn't help. Right now I'm trying the Videora iPod Converter and so far (fingers crossed, knock on wood) everything is going ok--certainly better than any other attempts. And the best thing? It's FREE.
The URL is: http://www.videora.com/en-us/Converter/iPod/
If anyone has any way to make it work in QT 7.0.4, I'd rather use it as I paid for it and it's more integrated with iTunes which probably means it would be easier to use in the long run. Otherwise, hopefully Apple will get on this ASAP.
Dell Dimension 2400 Windows XPMovie Inspector Data:
Source: MGEG0001.AVI
Format: XVID, 640 X 480, Millions
MS ADPCM, Mono, 12.000 kHz
Movie FPS: 30.00
Playing FPS: 0.00
Data Size: 7.42 MB
Data Rate: 2.21 mbits/sec
Current Time: 00:00:00.00
Current Duration: 00:00:28.16
Normal Size: 640 X 480 pixels
Current Size: 640 X 480 pixels
I downloaded the XVID codec for Windows, installed it & still nothing, but sound. This is an AVI file taken with my video camera.
Thanks! -
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?
If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
[SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio
Hey all,
I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
Thanks for such a great distribution,
Dan
Last edited by JazzDan (2008-06-29 05:06:35)Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!
-
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
I'm getting no sound with vmware, not sure why
Here's what I've been trying to test things:
$ cat /dev/urandom | aplay
Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
Here's some alsa info, if it helps:
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
sysdefault:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
front:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
Front speakers
rear:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC1
Rear speakers
surround40:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
4.0 Surround output to Front and Rear speakers
iec958:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
IEC958 (S/PDIF) Digital Audio Output
Last edited by specular (2014-08-27 19:52:45)Don't think I was clear enough, but arch is installed as a vmware guest. Below is the requested output from the alsa-info script:
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.63
!!Script ran on: Wed Aug 27 18:29:05 UTC 2014
!!Linux Distribution
NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: VMware, Inc.
Product Name: VMware7,1
Product Version: None
Firmware Version: VMW71.00V.0.B64.1310020058
!!Kernel Information
Kernel release: 3.14.2-1-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.14.2-1-ARCH
Library version: 1.0.27.2
Utilities version: 1.0.28
!!Loaded ALSA modules
snd_ens1371
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0x1000, irq 19
!!PCI Soundcards installed in the system
02:01.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
02:01.0 0401: 1274:1371 (rev 02)
Subsystem: 1274:1371
!!Loaded sound module options
!!Module: snd_ens1371
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
!!AC97 Codec information
--startcollapse--
0-0/0: Cirrus Logic CS4297A rev 3
PCI Subsys Vendor: 0x1274
PCI Subsys Device: 0x1371
Flags: 4
Capabilities :
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
0:00 = 0000
0:02 = 0e8e
0:04 = 0000
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = bfbf
0:0e = bfbf
0:10 = bfbf
0:12 = bfbf
0:14 = bfbf
0:16 = bfbf
0:18 = 28a8
0:1a = 0000
0:1c = 0808
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 4352
0:7e = 5913
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 6 Aug 28 01:35 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 2 Aug 28 01:35 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 5 Aug 28 01:35 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Aug 28 03:28 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Aug 28 01:35 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 1 Aug 28 01:35 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Aug 28 01:35 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 28 01:35 .
drwxr-xr-x 3 root root 200 Aug 28 01:35 ..
lrwxrwxrwx 1 root root 12 Aug 28 01:35 pci-0000:02:01.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [AudioPCI]
Card hw:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 19'
Mixer name : 'Cirrus Logic CS4297A rev 3'
Components : 'AC97a:43525913'
Controls : 26
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 49 [78%] [-21.00dB] [on]
Front Right: Playback 49 [78%] [-21.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 23 [37%] [0.00dB] [on]
Front Right: Playback 23 [37%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Video',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 8 [53%] [12.00dB] [on]
Front Right: Capture 8 [53%] [12.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
!!Alsactl output
--startcollapse--
state.AudioPCI {
control.1 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.2 {
iface MIXER
name 'Master Playback Volume'
value.0 49
value.1 49
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -9450
dbmax 0
dbvalue.0 -2100
dbvalue.1 -2100
control.3 {
iface MIXER
name 'Phone Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.4 {
iface MIXER
name 'Phone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.5 {
iface MIXER
name 'Mic Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.6 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.7 {
iface MIXER
name 'Mic Boost (+20dB)'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.8 {
iface MIXER
name 'Line Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.10 {
iface MIXER
name 'CD Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.11 {
iface MIXER
name 'CD Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.12 {
iface MIXER
name 'Video Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'Video Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.14 {
iface MIXER
name 'Aux Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.15 {
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.16 {
iface MIXER
name 'PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 23
value.1 23
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Capture Source'
value.0 Mic
value.1 Mic
comment {
access 'read write'
type ENUMERATED
count 2
item.0 Mic
item.1 CD
item.2 Video
item.3 Aux
item.4 Line
item.5 Mix
item.6 'Mix Mono'
item.7 Phone
control.19 {
iface MIXER
name 'Capture Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.20 {
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1200
dbvalue.1 1200
control.21 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.22 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
comment {
access read
type IEC958
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.25 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.26 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
--endcollapse--
!!All Loaded Modules
Module
fuse
vmw_vsock_vmci_transport
vsock
nls_iso8859_1
nls_cp437
vfat
fat
coretemp
hwmon
joydev
snd_ens1371
mousedev
snd_ac97_codec
hid_generic
ac97_bus
gameport
snd_rawmidi
snd_seq_device
snd_pcm
snd_timer
snd
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
soundcore
usbhid
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
hid
psmouse
vmwgfx
ppdev
ablk_helper
cryptd
evdev
vmxnet3
mac_hid
pcspkr
vmw_balloon
i2c_piix4
serio_raw
ttm
microcode
drm
processor
i2c_core
intel_agp
intel_gtt
vmw_vmci
parport_pc
parport
battery
shpchp
ac
button
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
crct10dif_common
sr_mod
cdrom
ata_generic
pata_acpi
atkbd
libps2
ata_piix
libata
mptsas
scsi_transport_sas
mptscsih
uhci_hcd
ehci_pci
scsi_mod
ehci_hcd
usbcore
mptbase
usb_common
floppy
i8042
serio
!!ALSA/HDA dmesg
[ 5.342713] mousedev: PS/2 mouse device common for all mice
[ 5.345140] snd_ens1371 0000:02:01.0: enabling device (0000 -> 0001)
[ 5.391722] intel_rapl: domain package energy ctr 0:0 not working, skip
Last edited by specular (2014-08-27 18:45:55) -
[SOLVED] No sound (with flash)
Hello.
I have no sound with flash. It does work elsewhere.
I am using ALSA.
My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
Last edited by handl3r (2012-01-22 07:39:34)codemac wrote:
Orrrr it's because the flash plugin uses OSS.
run `aoss firefox` and be happy.
OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great! -
NO SOUND with iMAC 24 - Please help
I have tried everything.........searched for drivers, everything, installed boot camp drivers from the CD numerous times.........I can't get rid of the ?pci device that shows up in the device manager. I am using windows xp sp3. The ? still shows up in the device list and I have no sound............everything else is perfect and great, but can't get sound!!!!!!!! I tried to update driver from realtek and sigmatel from the location on the hard drive and CD and no help. I DLed new drivers from realtek, no help..............does anyone know??????????
For those that are interested, this DOES work, as I have just tried this using SP3...........this is from another forum:
http://www.techarp.com/showarticle.aspx?artno=490
Basicly, download the file at the bottom of the page, unzip, go to Device Manager, right click the yellow (?) PCI driver, mark to select your own location and direct it to where you unzipped your file. That's it. UAA driver should be found and you should be able to hear sound.
If not yet, try now to re-install your audio drivers, and it should work. (if on mac, that means re-install boot camp drivers).
When doing the above, if it asks about a missing file, then point to where you just unzipped everything, it should be there, as it was for me. And, finally, in device manager, I still had one more issue for "audio device on high definition BUS" AFTER i corrected the PCI. To fix this, in device manager, I simply selected UPDATE DRIVER and use the MAC CD (or BOOTCAMP) and reinstalled the drivers and all worked fine after...................
I now have sound with my IMAC 24in and Windows XP SP3 (yes, i don't want to use much of XP at all, but it's nice to have............
Enjoy and let me know if this works or if you have issues, I would love to actually try and help...........
--pe@ce
Maybe you are looking for
-
New to iCloud - Some Privacy Issues!
Hello, I've just updated to iCloud from MobileMe. I have a Macbook Pro, an iPhone 4 (IOS 5) and an Ipad 2 (IOS 5). My MBP has two users with seperate accounts (myself and my girlfriend), log ins and passwords. I am 'admin' on the MBP and my GF doesn
-
I successfully made a disc.img and then burned a DVD of the project but found an error in a title. Went back to the project, corrected the error, and tried to create a new disc.img but got the message that some of the audio tracks were unavailable. T
-
My ipod touch will not sync with itunes help me please
Can someone help me figure out how to sync my ipod touch with itunes. Thanks
-
Getting an error while cofiguring Oracle 11g Portal, Forms, reports
Hello All, I installed the jrockit, weblogic server 10.3.5 and forms 11g 1.1.1.2 and ran the patchset for 11.1.1.3 and I was able to complete those without any problems. After that I started configuring and creating the domain I encountered the error
-
How to isolate the signals between TX/RX and RX2 on the USRP N210?
Hello everyone, I want to use one USRP N210 to transmit and receive signals simultaneously. But when I try to transmit signals from TX/RX and receive signals from RX2(the transmitted and received signals are on the same center frequency), I found