BEWARE Login PATCH for Leopard

I am so mad now.....
I had numerous problems doing a clean install on my mac pro. I have issues with this OS on my 2 daughters machines. THEN after I get to the point where I can live with this until a patch was released.... NOW I INSTALL THE PATCH ON MY DAUGHTERS MACHINE AND I AM STUCK IN AN ENDLESS LOOP BETWEEN LOGIN AND THE MIGRATION ASSISTANT. I CANNOT GET PAST THIS TO FIX THE ISSUE NOW. I HAVE SPENT MY FRIDAY AND SATURDAY MESSING WITH THIS INSTALL AND WONDER HOW ANYTHING THIS BAD EVER GOT OUT OF APPLE TO BEGIN WITH.
THANKS APPLE, KUDOS ON A JOB WELL DONE

John,
My installations have been flawless, and I am using the normal default installation method.
I had one issue on my MBP because of a 3rd party hacker preference plugin called "Application Enhancer", which caused a perpetual blue screen on start-up... but this was easily resolved (as in under ten minutes)
Please see discussion topic:
http://discussions.apple.com/thread.jspa?threadID=1199891&stqc=trueapple doc:
as well as Apple doc:
http://docs.info.apple.com/article.html?artnum=306857
What were the original problems before the update?
I had a long pause on the "Login patch update" on our G4 1.25 sunflower after it restarted on the update, it took it a while to boot back up just showing the Apple logo and the spinning beach ball... but it did start after about five minutes, and all is well.
If you can spell out exactly what happened, and what you did, perhaps the community could help ease your frustration with a satisfactory and quick solution. There is always a cause and affect.

Similar Messages

Should we wait for a Garageband 2 patch for Leopard?

GB is the only iLife app I really use seriously, and unfortunately it is utterly unusable in Leopard. The bugs make it behave like a low-rent freeware application, not a serious piece of Apple software. I never would have bought Leopard if I'd known it would cause this disaster in Garageband. Why the **** should I buy iLife 08? I hardly need it! Give me Garageband back!

Leopard is a different operating system. The GarageBand you are using was written for a much older version of the Mac OS. It still works fine with an older OS, does it not? If you want new OS features, then the OS will have a lot of new code, and new code will not be compatible with some old code in some older applications. The more complex the old application, the more likely you will have problem. And yes, a three year old computer is getting a bit long in the tooth, in computer years. If you are perfectly happy with the performance of your old computer and the OS that ran well on it, and the applications that were written for them, then stick with what you have. As to who to talk to about it....I don't know, the technology gods maybe?
One reason Apple has been a more innovative company than Microsoft is because Apple hasn't been chained as firmly as MS has to a whole bunch of legacy applications and legacy machines, belonging to many many businesses where updating software and equipment is a very painful and expensive proposition.
And I presume, if you've had Apple stock for awhile, you got a tidy profit when you sold it, since the innovations at Apple over the last few years have resulted in rather explosive growth. It was only a decade ago that the "smart" money thought Apple should sell their assets to Sun and go out of business....and Apple stock was selling for $32.
Francine
Francine
Schwieder

Leopard Patch for XML Flash Slideshow please?

Hi all. I've been searching for hours on end trying to find a patch for the Leopard OS for the XML Flash Slideshow v3 extension (to add an image slideshow) from dwuser.com. The support area of that site leaves much to be desired, but I've read elsewhere that I need "the Leopard patch". Can anyone point me in the right direction to get the appropriate patch, please? Form submissions to dwuser.com have gone unanswered to date. Thank you in advance.....

Monk Fan wrote:
Wow! Did you ever get an answer? I'm going through this right now. The GUI on v3 doesn't display correctly on Snow Leopard with Dreamweaver CS4, so I can't do any advanced editing.
reply to [email protected]
Because this product is not developed by Adobe your best bet is to contact the original developer.

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

Problem in applying the 6078836 OS Library Patch for Oracle HTTP Server

Hi ,
While installing Oracle ebusiness suite R12on a RHEL5 linux box (2.6.32-300.10.1.el5uek)
After running the installation, the post-installation System checks revealed that the HTTP, Virtual Directory, Login Page, Help Page & JSP services were failing. All the errors have the same error code RW-50015. ! Require Installing an OS Library patch for HTTP server according to Note ID
Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (32-bit) [ID 402310.1]
I am unable to stop the Database after stopping the Apps tier services. while trying to login into sqlplus hitting up this Error ! Please Advise
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
[Oracle@OracleLinuxServer 11.1.0]$ cd
sqlplus / as sysdba
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Following is the Output of some commands which may help in understanding the Issue !
*[Oracle@OracleLinuxServer ~]$ cd /oracle/VIS/db/tech_st/11.1.0*
*[Oracle@OracleLinuxServer 11.1.0]$ find / -name libclntsh\* -ls 2>/dev/null*
*142017047 13416 -rwxr-xr-x 1 applmgr oinstall 13712482 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so.10.1*
*142016603 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so -> libclntsh.so.10.1*
*142443526 13400 -rwxr-xr-x 1 applmgr oinstall 13696149 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so.10.1*
*142443190 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so -> libclntsh.so.10.1*
*89850399 36348 -rwxrwx--- 1 Oracle oinstall 37174788 Sep 12 2008 /oracle/VIS/db/tech_st/11.1.0/inventory/prereqs/bin/linux/libclntsh.so.11.1*
*89719502 0 lrwxrwxrwx 1 Oracle oinstall 17 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so -> libclntsh.so.11.1*
*89719501 36276 -rwxr-xr-x 1 Oracle oinstall 37100033 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1*
id
uid=2000(Oracle) gid=2000(oinstall) groups=2000(oinstall) context=root:system_r:unconfined_t:SystemLow-SystemHigh
*[Oracle@OracleLinuxServer 11.1.0]$ env|egrep 'ORA|PATH' | sort*
LD_LIBRARY_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
LIBPATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
ORACLE_HOME=/oracle/VIS/db/tech_st/11.1.0
ORACLE_SID=VIS
ORA_NLS10=/oracle/VIS/db/tech_st/11.1.0/nls/data/9idata
ORA_TZFILE=/oracle/VIS/db/tech_st/11.1.0/oracore/zoneinfo/timezlrg.dat
PATH=/oracle/VIS/db/tech_st/11.1.0/perl/bin:/oracle/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/Oracle/bin:.
SHLIB_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib

Also I 've checked the /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/ opatch_history.txt
Find that the Patch version is same for every Patch: Please suggest..... Thanks!
Following is the all contents of the file:
*[Oracle@OracleLinuxServer opatch]$ vi opatch_history.txt*
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7639602/7639602
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-17-01PM.log
Date & Time : Wed Mar 25 23:18:41 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7627743/7627743
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-18-41PM.log
Date & Time : Thu Mar 26 01:23:19 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
Command     : lsinventory
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-26_01-23-19AM.log
Date & Time : Tue Mar 31 03:13:12 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-12AM.log
Date & Time : Tue Mar 31 03:13:18 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-18AM.log
Date & Time : Wed Dec 19 19:59:52 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /oracle/VIS/db/tech_st/11.1.0/OPatch
Command     : lsinventory
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-19_19-59-52PM.log
Date & Time : Thu Dec 20 00:03:59 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle/6078836
Command     : apply
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_00-03-59AM.log
Date & Time : Thu Dec 20 01:28:42 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle
Command     : lsinventory -detail
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_01-28-42AM.log

Weblogic patch for the "Authentication for user wlsadmin denied" issue

Hi Everyone,
When I try to login to the weblogic console using the weblogic user id and password, I got below issue in the production server..Sometime back I saw a thread that Oracle has provided a patch for this issue. If any of you is aware of it then could you please provide us the patch file and its location please. This is quite a bit urgent. Awaiting for your response. Thanks in advance.
<Apr 3, 2011 10:41:02 PM ICT> <Critical> <Security> <BEA-090403> <Authentication for user wlsadmin denied>
<Apr 3, 2011 10:41:02 PM ICT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user wlsadmin denied
I need to communicate to onsite members about the patch details etc.
Edited by: user11290902 on May 13, 2011 1:27 AM

Faisal, Thank you for your response. Here the weblogic console id & password are known to few people so the guess you are making might be correct. Could anyone might have tried with incorrect credentials couple of times before we face this issue, I am not sure though. The moment we provide the credentials and upon click on Log In button we are getting j_security_check.
http://asdo0002:9683/console/j_security_check
Authentication Denied.
The username or password has been refused by WebLogic Server. Please try again.
Any information about the work--arounds or patches from weblogic would be helpful to me... Thanks a lot.

Has there been any new drivers or patches for kensington trackball expert using mountain lion?

are there new drivers or patches for the kensington trackball expert? i'm using mountain lion on the imac 3.06 ghz intel i3 and it will not recogmize any driver i install. all this after the installation of mountain lion.

Kensington has a new version of Trackball Works 1.1.1 available, try it and see if your problems go away.
It is made for Lion & Mountain Lion.
TrackballWorks for Mac v1.1.1
March 11, 2013
Welcome to version 1.1.1 of TrackballWorks for Mac. This document describes the latest changes.
Compatibility
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard
Supported Hardware
SlimBlade™ Trackball (K72327)
Expert Mouse® (K64325)
Orbit™ Wireless Mobile Trackball (K72352)
Orbit™Trackball with Scroll Ring (K72337)
Orbit™ Optical Trackball (K64327)
Installation Instructions
To run the installer, double-click on the DMG file, then double-click on"Kensington TrackballWorks.pkg". Follow the on-screen instructions.
Fixes Issues
Resolves an installation problem with Mountain Lion where TrackballWorks may not install properly with the Mountain Lion default security settings.
Resolves an issue with settings persistence where, after a reboot, some settings become reset to their defaults.
Changes & New Features
Button actions that are dependent on the Mac OS X version now correctly display or hide depending on the version of Mac OS X being used.
Button action "Launchpad" has been added for Mountain Lion.

Patch for chrome 36 - video

I just installed the patch for chrome 36 ,, but videos on my project still do not work....

mterry wrote:
I've been looking into why Chrome seems to choke on initally loading main.html after login, and I've developed a patch that seems to correct the issue. What's the best method of submitting this patch to the Convergence developers for possible review and inclusion into the product?The developers produced a fix for this issue some time ago. As Chrome is not an officially supported browser the fix has not been included in Convergence 1 patches however the fix is available with the upcoming Convergence 2 release.
Please note however that Chrome is (and will remain) an officially unsupported browser. If official Chrome browser support is important to you I suggest you raise the following enhancement request with your Sun/Oracle account manager:
RFE#6940556 - "Support for Google Chrome browser"
Regards,
Shane.

Help-urgent - how to update service pack and apply patches for ADS

Dear all,
   I've just download the sp 11 and the patch ,how should i update my ADS? I've try to search the forum but to no avail. Pls advise,thanks.
Regards,
Joan

Hi Joan,
To deploy an SCA or SDA, proceed as follows:
      1. Make sure you have downloaded the SCA or SDA from SAP Service Marketplace.
      2. Start the SDM GUI. To do this, execute the following file:
            a) Windows: RemoteGui.bat in folder \usr\sap\<SID>\<instance>\SDM\program
            b) Unix: RemoteGui.sh in folder /usr/sap/<SID>/<instance>/SDM/program
      3. The SDM GUI screen appears.
      Note: With SAP Web Application Server 6.30 the SDM server is started whenever you start the SAP system. To check whether the SDM server is running, use the tools SAP Management Console (Windows) or jcmon (UNIX).
      4. Choose "SDM Gui -> Login" or the icon "Connect to SDM Server". The dialog box "Enter Login Information for SDM Server" appears.
      5. Enter the following information:
            a) Password
            The initial password is "sdm" (without quotes).
            b) User description (optional)
            c) Hostname
            d) Port
            With instance number 00, the default port number is 50018. If your instance number is different from 00, the port number changes to
            Port = 50018 + 100 x <instance number>.
            You have to calculate the new port number and enter it manually.
      6. Choose "Login". The SDM GUI appears.
      7. Choose tab "Deployment".
      8. Choose "Add SCA/SDA to Deployment List (Local File Browser)". A file selection screen appears.
      9. Select the SCA or SDA file you would like to deploy and choose "Next" to read the information on the following screens.
      10. Choose "Next" until the "Start" button appears.
      11. Choose "Start". After the SCA or SDA has been completely deployed, a success message appears.
      12. Choose "Confirm" to return to the SDM GUI.
      13. When you have finished work, log out from the SDM server. Choose "Deployment -> Logout" or the icon "Disconnect from SDM server" for this.
If this answers your question, please mark the question accordingly and do award points if helpful.
Regards,
Arafat

Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?

Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?

claytonfromwa wrote:
Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?
I'm not aware of any being for sale and if there are it's a scam. bash is free software provided to Apple and many other computer software developers.
If you are still running Snow Leopard and you feel the need to patch bash, you will have to compile it for yourself.
Note that Apple is on record as saying:
The vast majority of OS X users are not at risk to recently reported bash vulnerabilities," an Apple spokesperson told iMore. "Bash, a UNIX command shell and language included in OS X, has a weakness that could allow unauthorized users to remotely gain control of vulnerable systems. With OS X, systems are safe by default and not exposed to remote exploits of bash unless users configure advanced UNIX services.

Patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3

Could any one give me patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3, because i don't have login at metalink, please send me at [email protected] thank you very much!!!

The only advice that I can tell you is that you have install the softwares in different Oracle Homes and the rest is to check all pre-requisites and directives in manual installations.
Joel Pérez

Zenworks Patch for Zen 3.2 and no console prompt????????

I've installed my patch for zen 3.2 on a netware 4.11 server and for
some
reason my console prompt is gone. I can still get to the console
screen buy
alt and esc and see the screen but, this is no prompt. It's like going
to a
command prompt in windows but there is not command prompt. Does
anybody know
what wrong?
thanks
Pat Lenahan

Here it is!
"Jared L Jennings" <[email protected]> wrote in
message
news:[email protected]...
> Do you know what the last thing is that loaded?
> If you are able to login to the server, do you have a console log?
> sys:\etc\consol.log If so you might post the latter part of it.
> It will prompt you for each thing to be loaded, then you will know
> which is the last.
>
> On, a side note. ZFD 3.2 is not supported on 4.11, I believe it
works,
> but for sure don't be surprised if you get errors.
>
> --
> Jared L Jennings
> Novell Support Forums SysOp
> Using XanaNews 1.15.2.7
> Geek by nature, NetWare by choice.
Loading module NWSNUT.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module JAVA.NLM
Novell JVM Version 1.1.7B Build 01012614
Version 1.17 January 26, 2001
Copyright (c) 1998-2000 Novell, Inc.
Portions Copyright (c) 1998 Sun Microsystems
Debug symbol information for JAVA.NLM loaded
Loading module JAVA.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module DBSRV7.NLM
Sybase Adaptive Server Anywhere 7.0.0.505
Version 7.00 December 14, 2000
Copyright 1989-2000 Sybase, Inc. All rights reserved. All
unpublished
rights
reserved.
Auto-loading module MATHLIB.NLM
NetWare Math Library Auto-Load Stub
Version 4.21 March 31, 2000
Copyright (c) 2000 Novell, Inc. All rights reserved.
Loading module DDCLIENT.NLM
NetWare 4.1 Direct Directory Client
Version 6.56 February 10, 1998
Copyright 1993-1997 Novell, Inc. All rights reserved. Patents
Pending.
Portions (C) Copyright 1986-1990 RSA Data Security, Inc.
Loading module IMGSERV4.NLM
ZENworks Imaging Proxy Server (NetWare 4)
Version 3.01 July 12, 2001
(C) Copyright Novell Inc.
Auto-loading module NETDB.NLM
NETWORK DATABASE ACCESS NLM
Version 4.10a August 14, 2000
(C) Copyright 1998, Novell, Inc. All rights reserved
NDS Context: O=anlin
NetDB Library loaded successfully.
Auto-loading module ZENIMGDS.NLM
ZENworks Imaging DS Library
Version 3.22b March 20, 2003
Copyright (c) 2000, 2001, 2002, 2003, Novell, Inc.
Debug symbol information for ZENIMGDS.NLM loaded
Search 6: [Server Path] SYS:MCAFEE\NETSHLD\
Loading module NETSHLD.NLM
McAfee NetShield for NetWare
Version 4.60 December 17, 2001
Copyright (c) 1995-2001 Networks Associates Technology, Inc. All
Rights
Reserv
ed.
Auto-loading module NAIREG.NLM
McAfee NetShield for NetWare
Version 4.60 December 17, 2001
Copyright (c) 1995-2001 Networks Associates Technology, Inc. All
Rights
Reserv
ed.
Auto-loading module MCSCAN32.NLM
Network Associates Anti-Virus Engine
Version 42.40 February 24, 2003
Copyright (c) 2003 Networks Associates Technology,Inc. All Rights
Reserved.
Loading module DSBACKER.NLM
NetWare 4.11 Directory Services Install
Version 5.50 September 30, 1998
Copyright 1993-1996 Novell, Inc. All rights reserved. Patents
Pending.
Symantec Java! JustInTime Compiler Version 3.10.110(x) for JDK 1.1.x
Copyright (C) 1996-99 Symantec Corporation
Symantec Java! JustInTime Compiler Version 3.10.110(x) for JDK 1.1.x
Copyright (C) 1996-99 Symantec Corporation
java.lang.NoClassDefFoundError: org/omg/CORBA/ORB
Loading module PFTDLBS.NLM.naming.NamingServer.main(Compiled
Code)
Java Class Libraries for NetWare - 4.x Loader Aide
Version 1.10 July 12, 2000
Copyright 1997-1999 Novell, Inc. All Rights Reserved.
6-20-03 1:33:20 pm: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-20-03 1:41:10 pm: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A
6-21-03 12:38:03 am: SERVER-4.11-930
User ANDY at station 55 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User SHIPPING at station 11 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User MANUEL at station 20 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User GEORGE at station 21 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User PAM at station 71 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User RICHARD at station 134 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:38:34 am: SERVER-4.11-930
User ANNA at station 116 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 5:14:35 pm: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-21-03 5:15:40 pm: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A
6-22-03 12:38:11 am: SERVER-4.11-930
User ANDY at station 18 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User MANUEL at station 2 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User RICHARD at station 14 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User SHIPPING at station 20 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User GEORGE at station 24 connection terminated
User did not log out within 5 minutes after security watchdog
notice
Loading module DSBACKER.NLM
NetWare 4.11 Directory Services Install
Version 5.50 September 30, 1998
Copyright 1993-1996 Novell, Inc. All rights reserved. Patents
Pending.
Module DSBACKER.NLM unloaded
6-23-03 1:07:33 am: SERVER-4.11-930
User SHIPPING at station 14 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 1:07:33 am: SERVER-4.11-930
User GEORGE at station 17 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 1:07:33 am: SERVER-4.11-930
User BOBBY at station 18 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 9:13:30 am: RSPX-4.12-28
Remote console connection granted for 00000001:00065B9E477E
6-23-03 9:13:55 am: RSPX-4.12-23
Remote console connection cleared for 00000001:00065B9E477E
6-23-03 10:49:04 am: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-23-03 10:49:39 am: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A

Wasn't there supposed to be a new Voice for Leopard Speech things?

Hello!
I remember that some time ago, I heard that Leopard was going to have new voices of some sort for things that use "speech". I believe it came from someone with the developer beta. Unfortunately, it appears that retail Leopard does not have a new voice, at least doesn't appear in the Speech panel of System Prefs. I may be missing it, however. Is there actually a new voice, of was that a rumor that never materialized?
I'm running Mac OS 10.5.1 on a 15" Powerbook G4, and everything is fully up-to-date.
Thanks,
-Daniel

Alex is surprisingly natural sounding. I found it accidently when I was poking around looking for large items (it's 670MBs). It should be here:
"/System/Library/Speech/Voices/Alex.SpeechVoice"
Had it read a poem and it did quite well. I currently have it make a little announcement when I login:
"Welcome to Leopard. Francine has changed some of my spots, but I forgive her." Well, my students got a kick out of it....
Francine
Francine
Schwieder

Is there a patch for the NTP security issue that does not require Xcode?

Is there a patch for the NTP security issue that does not require Xcode? I have an older Intel mini that can't be upgraded beyond 10.6.8 and I currently don't have room for Xcode 3.2.5. Has somebody trustworthy posted these binaries?

NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
You can also go to System Preferences/Date & Time and deselect Set time Automatically.
Snow Leopard users: Turn off automatic date and time in System Preferences immediately

BEWARE Login PATCH for Leopard

Similar Messages

Maybe you are looking for