Beware Moving Files in OSX Lion

Anybody having problems moving files in OSX Lion?  I tried to move some files from my Downloads folder to a USB Flash Drive and it looked like the file moved successfully but the file doesn't exist in either my USB Flash Drive nor my Downloads folder.  The files just disappeared.
The only way to fix this problem is to reboot the machine.  Eventually, the OS will get back into this state and you won't know it until you try to move some files and end up losing them instead.  This is the third time this has happened to me since upgrading to OSX Lion.

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Similar Messages

  • What is best way dealing with large tiff file in OSX Lion?

    I'm working with large tiff  file (engineering drawing), but preview couldnt handle (unresponsive) this situation.
    What is best way dealing with large tiff file in OSX Lion? (Viewing only or simple editing)
    Thx,
    54n9471

    Use an iPad and this app http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=400600005&mt=8

  • Sharing pst (outlook) files over OSX lion server

    Hi,
    I can share every type of files via osx lion server. But if I try to share .pst files (Outlook) files and try to connect from a Windows 7 pc to the share. It doesn't work.
    Any idea?
    Best Regards,
    Christian

    I found out that I can open the Access db but only if I choose "open exclusively" in the office file dialog box, meaning that other users on the  network won't be able to open the db when I have it open.
    So it seems a file lock issue. Anybody having an idea what I could try to change the SMB file lock behaviour on OSX Lion would help me allot.
    Thanks
    Roger

  • How to use Migration Assistant to transfer files from osx lion to osx snow leopard

    I have MacBook with osx Lion and I need transfer my user acount to another mac computer (Mac mini) because my MacBook was broke and I send it to service. On Mac mini I have osx Snow Leopard. Is possible to use Migration Assistant to transfer files from osx Lion to osx Snow Leopard?

    Sorry, but there's no way to "go back" with Migration Assistant.
    Can you upgrade the Mini?

  • All of my files in OSX Lion are read only, why?

    I've just upgraded to a new Mac Mini which has OSX Lion, Version 10.7.3. I don't use the admin login for security reasons, I'm using a separate user login. When I want to modify a document (delete a document/folder or move a document into a folder) I have to type in the admin login every time. I've looked in the Get Info window of some, and the Sharing and Permissions all say Read Only.
    Why are all my files Read Only? Is there a way to make everything in my login Read and Write without manually changing them all individually?

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy – do not type – the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • System files on OSX Lion / Changing the bakround of Log-on screen

    I found a guide to how to change the incredibly boring bakround in the log-on screen on OSX Lion, which was described really easy. And since its such a boring bakround and since i like to customize my stuff, was just about to go through the few basic steps to change it.
    When i directly ran in to a problem.
    In order to change the bakround, i need to find this location "/System/Library/Frameworks/AppKit.framework/Versions/C/Resources" and then the file "NSTexturedFullScreenBackgroundColor.png".
    But, If i search in finder, it shows no results at all if i search for the filename, and no results shown when i search for any of the folders names...
    Why??
    I have done no changes since i bought my macbook pro 13.3", with OSX Lion on it a few weeks ago. I am the admin and only user of the macbook.
    It is set to Swedish as the main language, could that result in the system files having different names?
    Otherwise other ways to change the log-on screen's bakround will be appreciated as well.
    As long as the tip is not "Ravissant", wich i have already looked at, but that would only make the log-on screen even uglier.
    I found the tips on this site: http://http://t3kd.com/blog/2011/07/27/how-to-change-os-x-lion-login-screen-back ground/?pid=313
    Even though i'm not asking for help to understand this "how to", i'm just asking why my computer can't find thoose files.
    Help Appreciated /optifekk

    That has never been a feature of Mac OS X, but I believe there was some kind of third-party software that could add that capability.  i don't recall what its name is, but you must have had that installed, and it either isn't installed anymore (perhaps removed as incompatible?) or is not working properly in Mountain Lion.

  • FCP 7.0.3 won't open project files with OSX Lion.

    After upgrade to Lion, FCP 7.0.3 won't open existing project files (built with 10.6.8)  Error message is "wrong file type". Help?

    https://discussions.apple.com/docs/DOC-2491
    If deleting your preferences doesn't work, here are some more troubleshooting tips
    https://discussions.apple.com/docs/DOC-2591
    If you like, you could send me a project file that won't open.  I'll check it on my system and we can eliminate the possibility that the project files have been corrupted.  Me email is in my profile.  Be sure and compress project file before attaching to email (control click on file and choose "compress."  this will create a zipped version of the file that's suitable for attachment.).

  • How to select multiple files in OSX Lion?

    Hi, I was wondering if Finder in Lion has a funtion similar to the Control+Click option that Windows has, which allows me to select multiple non-sequential files.
    Thanks!

    Csound1 wrote:
    Cmd+Click
    Thanks for your help...

  • How to to totally delete files from osx lion

    How do you totally delete files from your trash bin, so they can no longer be viewed or recovered? Thanks

    Thanks Kappy....What if I have already deleted the file, and it is already in the trash bin! I did not securely empty it the first time! Is there a way to permantetly delete and make sure it is totally off my computer and not be viewed or recovered? Thanks again!

  • Listening to WMV Files? Cannot do Anymore w/OSX Lion?

    Not sure what has happended, but I no longer can listen/view WMV files since OSX Lion has been installed.
    Have the most recent version of Flip4Mac and also downloaded and tried VLC
    Any help would REALLY be appreciated!

    QT thx again for the quick reply.
    I am still baffled why I could listen/view all the .wmv streams (w/Fip4Mac) from our college radio station before, now with OSX Lion I cannot.
    I did try VLC and was able to hear the 1st stream :-)
    http://www.streamaudio.com/stations/asx/wqun_am.asx
    and I did get a test signal from the 2nd URL:
    http://streamwm.Quinnipiac.Edu/wqunaudio
    I will post later tonight when the two games begin if I can hear them.
    Do you have any clue why Flip4Mac no longer works for OSX Lion users? And how do fix it?
    My concern is more for the gorwing number of Mac listeners who no longer can listen.
    Thx Much!

  • HT2674 I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted.  File folder: "Core Services" contains a locked file: "boot.efi".  It will not

    I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive which operates from Time Machine.
    Now, the trash can will not empty some of the files deleted from the backup harddrive.
    The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi". 
    It will not delete.
    How do I get the trash can empty of these files?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Nokia C5-03 and Mac OSX Lion - Problems copying files to phone in Mass Storage mode

    Whenever I try to load more than one file from my iMac (early 2008, OSX Lion 10.7.2) to my new Nokia C5-03 in Mass Storage mode —since the files are MP3s and Multimedia Transfer doesn’t seem to work at all, I keep on getting asked which transfer mode I want to activate for several times, I always choose Mass Storage, and then the first file starts copying, but when it ends with the first one I have to wait for ±30s only to get asked the same again and again until the second file starts copying, and so on.
    It’s driving me crazy, I’ve tried setting in the USB connectivity options not to ask me for the mode when I connect the phone, but it doesn’t work either. It still goes very slow and a lot of “USB Mass Storage transfer mode activated” messages appear.
    I’ve tested it with a friend’s C5-03 and it’s still the same, but when connecting them to a Windows computer everything goes great and fast. Has somebody had this problem before? Is there a solution to this? I don’t know if this is the correct board to post this, sorry if it’s not.
    Thanks in advance.
    PS: Sorry if there are any mistakes or my English sounds weird, i’m Spanish.

    Hi,
    Can you try the suggestions below?
    -Go to Add/Remove Programs in Control Panel (called Programs
    and Features in Microsoft Windows 7).
    Select Nokia Ovi Suite in the list of applications and click
    Change/Remove.
    In the dialog that appears, choose Repair.
    - Click Nokia Connectivity Cable Driver and repair
    -Try creating the connection between your phone and computer
    totally from scratch. Start by disconnecting your phone. In
    Nokia Ovi Suite, select Tools > Options > My devices. Select
    your phone at the top of the window and click Remove this
    device.
    Then, select Tools > Add new device, and follow the
    instructions to reconnect the phone. 
    If this doesn't solve the problem,
    -Uninstall the following programs withAdd/Remove Programs in
    Control Panel (called Programs and Features in Microsoft
    Windows 7):
    Nokia Connectivity Cable Driver
    Nokia Ovi Suite
    PC Connectivity Solution
    Then, download and install the latest version of Nokia Ovi
    I hope this helps.
    Br
    Mahayv

  • QuickTime 10.1 does not seem to be compatible with OSX Lion  - clicking on the displayed file window switches to another displayed app, doesn't play or control the video.

    If I open a movie file (appears to be any type - .mov, m4v, mv4) it displays on the desktop, but when clicked, the Mac reverts to another open application (immediately UNDER to point of the mouse click) and not the displayed movie file.  It appears the screen mapping is flawed...
    Anyone else have this problem? (does not appear to be a problem with QT7)  Running OSX Lion 10.7.3 and QT Player 10.1 (501.8) - all most current as far as I can tell...

      Yes, same problem. The active clickable area appears to be shifted down and to the right as if it is the shadow mask (to make it look like layers in the display) that is responding. Means you can't move the control palette to the top of the window (to not block security video with time track at bottom) or even close the window. The X in the bubble appears when moused over but the click goes through it.
      Most obvious if you open more than one movie at a time and they cascade. You can't get at the ones underneath until a few down the stack and it gets an upper wrong one.
      Who's testing these things?
      For comparison testing to recreate problem: Mac Pro (System Information has also been dumbed down from System Profiler, push System Report for the useful stuff) with an ATI Radeon HD 5770 driving two displays.
       Also viewing desktop of another computer on the network is slower and, for instance in World of Warcraft, the hand pointer flickers.
      And finder windows can't be narrowed as much any more to show only a list of file names for drag and drop sorting.
      Was hoping that by 10.7.3, it would be safe to jump, since several posts told me how to Terminal > networksetup -setv6off Ethernet to fix iTunes streaming to expresses and other dumb bugs.

  • I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

    I am running Mac OSx Lion 10.7.2.
    My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • With OSX Lion, how use Spotlight to know the way to a file you are searching ; formerly , with Snow leopard you had only to let the arrow pointer on the name of the file , but now on Lion it didn't work, how to do ?

    How to know the way to a file you are searching in Spotlight with OSX Lion ?

    You are right, the way to the file appear down the virtual picture, near the title of the documents ; it is a little more complicated than in Snw Leopard , but it works
    Many thanks from France
    Robert

Maybe you are looking for

  • All matched, now what happens when I go on holiday?

    Ok I admit, I did not look too much into the whys and wherefors of itunes match before I signed up for it. I did not give it a great deal of thought, so I have everything that is coming to me. I have successfully matched my 3000 or so songs and they

  • RH Linux and AQ performance problem

    I am running RH Linux 7.1 with Oracle 8.1.7. My web application works fine until a specific point when I begin using AQ. Part of the AQ initialization in my application is to create 8 DB connections which pole the DB every 500 ms. These connections c

  • Ibooks for iphone

    I did a book with iBook Author and now I would like to have that book on my iphone6, but it seems not to be possible: is that true? why??

  • Iframe embed not available with Facebook?

    I have tried to embed my facebook page into my site with no success. When I put this code in : <iframe width="100%" frameborder="0" src="http://www.facebook.com/pages/Little-Blue-Photo-Booth/101721646554966?__req=4" height="900"></iframe>  the only t

  • InDesign CC crashes every time I use type tool

    I just installed InDesign last night and every time I use the type tool the program crashes. Any suggestions?