Beware the Refractor - Move - does not update xml files - ouch!

better hope you have backups

yes check text file was checked . it moves the java file ok from the package but leaves the xml info the same so now databindings.cpx has a problem. if you run the java file you get everyone's very favorite null pointer error which sends you looking everywhere again.
Also good forbid you have a spelling error in the xml file when you fix it. It will actually creates a new xml file --- why ? --- which creates a null pointer error of course!
So what shell is the null pointer under?

Similar Messages

When syncing on my Galaxy Note 2 the 'bookmarks toolbar' does not update

I have a laptop, desktop, and Android phone hooked up for syncing. After the initial sync the 'bookmarks toolbar' tab on the galaxy note 2 does not update when these are changed on the laptop or desktop. How do I fix this?

Hmm nothing at https://twitter.com/mozservices or https://services.mozilla.com/ states that however it is having a service disruption according to http://status.mozilla.com/11627/149178/Sync-%5BBasic%5D

IDOC_INPUT_HRMD, it posts the document but does not update the Infotypes

Hi,
I am trying to trigger the IDoc Type 'HRMD_A06'. This Idoc was posted successfully, with the status as '53' (inbound IDoc). The Processing Function Module is IDOC_INPUT_HRMD for the IDoc "HRMD_A06". However the infotypes are not updated. The infotypes I am trying to update are 0000,0001,0002,0006, & 0008.
If someone has a solution for this issue. Kindly let me know.
Regards,
Narun

Hi Srinu,
Again....
Whats happening in Debug ???
Just clone the FM as it is and use the FM HR_INFOTYPE_OPERATION instead of other.
Parameters:
The following code is for infotype 15 inside custom FM which i have done. u can use for ref.
CALL FUNCTION 'ENQUEUE_EPPRELE'
        EXPORTING
          pernr          = l_wa_p0015-pernr
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc = 0.
        CALL FUNCTION 'HR_INFOTYPE_OPERATION'
          EXPORTING
            INFTY                  = c_0015
            NUMBER                 = l_wa_p0015-pernr
            SUBTYPE                = l_wa_p0015-subty
OBJECTID               =
LOCKINDICATOR          =
            VALIDITYEND            = l_wa_p0015-begda
            VALIDITYBEGIN          = l_wa_p0015-endda
   RECORDNUMBER          =
            RECORD                 = l_wa_p0015
            OPERATION              = c_ins1
            TCLAS                  = c_a
            DIALOG_MODE            = '0'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
          IMPORTING
            RETURN                 = l_i_return .
KEY                    =
To dequeue the selected employee
        CALL FUNCTION 'DEQUEUE_EPPRELE'
          EXPORTING
            pernr = l_wa_p0015-pernr.

JDEV 10.1.3 XML Editor does not load XML file

I am trying to edit a large (300MB+) xml file with JDEV 10.1.3 running on a Windows XP Pro workstation with a 2.8 ghz processor and 1GB of memory. The XML file has application data in it. The file loads just fine into the Oracle database using the XML Developer's toolkit so I don't thing there is anything wrong with the XML.
I'm finding that the XML editor does not load the file. Many minutes elapse, then JDEV appears to simply give up - JDEV is no longer busy. There's no XML data to edit - that window is empty. There are no error messages displayed.
I'm new to JDEV so I need to know if there is an error log file I should examine.
BTW, other XML editors (XML Spy, Stylus Studio, etc) simply run out of memory and lock up the machine - it appears they are tryign to convert the XML file contents into 32-bit unicode in memory, build a list of pointers to impose a DOM-like structure, and then load their editor.

Do you really want to manually edit the 300MB file? how much scrolling will you need to do to get to the last row?
In any case it is likely that JDeveloper also runs out of memory - you can try running the [jdev-root]\jdev\bin\jdev.exe file and see if you get any error message in the log window.

DCS does not update when file saving windows appear

I am using LabView (with Fieldpoint opc) to control plant operations. When I save a labview file and the Save the VI window appears
with the files/directories etc, everyprocess running on the computer freezes, input/output data from fieldpoint does not change
until the Save the VI window is gone (ie file saved or cancel pressed). This is not a very good situation for realtime online control
of processes.
Brendan Veilleux PTX Food Corp

Hi Brendan,
Can you tell us a little more about your application? From the title, it sound like you're using the DSC Module. Is that correct? What are you doing in the VIs? Is the VI that you're modifying part of the running application? Do you have any VIs running on the Fieldpoint?
Jared S.
Applications Engineering
National Instruments

The "Cluster Group" does not contain a File Share Witness or a Witness disk.

Hi,
I've been given a 4 node Server 2008 R2 cluster to work on. I have a couple of file servers under services and applications (file1 and file2). If I look under storage I see my quorum disk listed in Disk witness under quorum and then I see the file1
and file2 disk resources. Should I be concerned with this warning?

Hi,
Do you mean that you are expecting that you saw the File Share Witness under "Disk Witness in Quorum"?
I just created a cluster and set FSW like this:
However it will not displayed under Disks. It should be caused by design.
My test machines are Windows Server 2012 R2.
If you have any feedback on our support, please send to [email protected]

HT2513 The date on my dock does not update automatically ? - Ps anybody.

I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.

I solved the problem by uninstalling Glims.

I did the update to 3.6.11 - when it restarted it will not open any pages. When i go to check for updates it gives me this error: Update XML file malformed (200) - Any advice?

I did the update to 3.6.11 - After it started Firefox it would go to the requested site in the addressbar, but the page would be blank. I went to check for updates and it told me there was a problem in updating. It gave me this error message: Update XML file malformed (200)
I uninstalled and reinstalled and the same problem exists.
Any advice?

For the error message see [[AUS Update XML File Malformed 200]].
As it appears not to be able to load any sites, a possible cause is your firewall blocking the new version of Firefox. For more details see [[Firefox cannot load websites but other programs can]].

Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

I need to update a schema from Sharepoint with namespace
http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
Is there a way to update the dip using VBA.
/Ola
olha

Hi,
This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
Microsoft Office for Developers, to get better support experience:
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

I am having a situation with SSRS 2012 (SP-integrated) report rendered on SP 2013 PerformancePoint Dashboard using linked PerformancePoint (PP) filters.
The report works fine as long as too many PP filter items are not selected at the same time. When gradually selecting more items from the filter, the report updates itself until more than a sepecific numer of filter items are selected - the report simply
does not update itself anymore. This "specific number of filter items", when hit, generates the following error in ULS:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: System.UriFormatException: Invalid URI: The hostname could not be parsed.
at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
at System.UriBuilder..ctor(String uri)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.ReportUrl(SqlReportViewData sqlReportViewData)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderSqlReport(TextWriter writer, ReportView sqlReportView)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderReportViewControl(HtmlTextWriter writer, ReportView rv) PerformancePoint Services error code 20700.
I already know that the cause of the issue is in the length of the query (perhapse RDL or MDX) that the browser is supposed to pass on to the instance of SSAS.
Some people had suggested a workaround that was suitable for older versions or non-integrated SSRS (see here: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object).
Knowing this, have already done the changes suggested (adding the lines suggested to SP's web.config for Reporting and the web.config of the site on which report is rendred) at no avail, just to make sure.
I have rednered the same report on the same dashboard using SSRS filters and there is no problem; it just works fine. This has to be a bug in PP that is causing this.
Has anyone had the same problem with SSRS 2012 (SP-integrated) report rendered on SP 2013 PP dashboard using PP filter? Any fixes or workarounds?
thnx!

Hello everybody.
I confirm the issue in Service Pack 1 Release 2.
Poor workaround is to remove the repeated infromation from the member keys (in SSAS they can be really long).
The issue seems to be specific to SSRS: Excel Services works well with the same filter.
Sergey Vdovin

Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Change_connection does not update entire info about application

The procedure change_connection does not update the entire info of the about application window. When I change my connection the connect string in the about application window still shows the old connection string.
I added the line g_connect_string := get_application_property(CONNECT_STRING);
to the procedure change_connection between the lines
-- Reset user preference settings for new user connection
qms$user_prefs.init;
and the lines:
-- The menu must be replaced because the new user might have other security privileges
Now the connect string will change in the about window.

Mark,
This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
Regards,
Marcel

Captivate 6 - Updating template does not update project

Hi ,
I am just learning Captivate 6 and have started by creating a theme and then a template. If I create a project file using the template and then go back and make a change to a graphic in the template should it automatically update the project file or do I have to apply the template to the project file again some how? Currently if I make a change to the template it does not update the project file.
Thanks,
Richard

Hi there
Have you ever inserted a document into a copier and made a copy?
If so, this is really the way Captivate templates work. They are designed so you have a consistent look and feel to projects you create from them. So returning back to the copier analogy, once a copy has been made, any changes to the original are NOT reflected in the copy created from the original. But future copies WILL have the changes as the copies were made from the altered original.
Likewise, any changes to the Captivate template are only reflected in the Template as well as Future projects you create using the template. Once created, there is no longer any association with the template.
Cheers... Rick

Beware the Refractor - Move - does not update xml files - ouch!

Similar Messages

Maybe you are looking for