BEx 7.0: Direct Input - Problem - []
Hi Experts,
there is another small problem while using the SAP query designer 7.0.
I want to qualify a query attribute by using direct input because there are no valid master data on our developing system.
Also i am not able to load the master data on the developing system.
So i type in the direct input box:
EX![COMPANY]
The result after hitting the submit button is the following:
EX!COMPANY
Do i have to mask the [] ?
Or any other ideas?
Thanks guys.
Florian
Edited by: Florian Seeger on Oct 5, 2010 1:52 PM
Hi Mario,
You need to use text element for this.
Run the query, click on some cell which doesnt have query result(the variable values would be displayed in this cell), go to the design item text element in the design toolbar.
Double click on the text element. Go to filters table. Check all the filter checkboxes
Click on the design mode(A icon) to go back to the analysis mode.
Now the input variable values would be displayed.
To go to design mode either you can use BEX design toolbar or go to BEx Analyzer menu --->Design toolbar --->Text element.
Hope this helps,
Best regards,
Sunmit.
Similar Messages
-
Problem with direct input program while uploading data into database
TABLES: BGR00, " Mappensatz
BMM00, " MM01/MM02 BTCI-Kopfdaten
BMMH1, " MM01/MM02 Hauptdaten
BMMH2, " Länderdaten (Steuern)
BMMH3, " Prognosewerte
BMMH4, " Verbrauchswerte
BMMH5, " Kurztexte
BMMH6, " Mengeneinheiten
BMMH7, " Langtexte
BMMH8. " Referentielle EAN's
Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
KOPFSATZ LIKE BMM00-STYPE VALUE '1',
HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
LANDSATZ LIKE BMM00-STYPE VALUE '3',
PROGSATZ LIKE BMM00-STYPE VALUE '4',
VERBSATZ LIKE BMM00-STYPE VALUE '5',
KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
MESATZ LIKE BMM00-STYPE VALUE '7',
TEXTSATZ LIKE BMM00-STYPE VALUE '8',
EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
MARC, "Material Master: C Segment
MARD, "Material Master: St Loc/Batch
MBEW, "Material Valuation
MVKE, "Material Master: Sales Data
MLGN, "Material Data per Whse Number
MLAN, "Tax Classification: Material
T001W, "Plants/Branches
TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
REC_COUNT_BAD TYPE I,
ZJOBID LIKE TBIZU-JOBID,
ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
ZMATNR LIKE MARA-MATNR,
ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
LIT_CHAR TYPE C VALUE '_',
LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
MATNR(18) TYPE C, " Material code
UMREN(6) TYPE C, " Denominator
MEINH(3) TYPE C, " Alternate UOM
UMREZ(6) TYPE C, " Numerator
END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
NO INTERVALS
LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
DEFAULT 0,
P_JOBNAM LIKE TBICU_S-JOBNAME
MEMORY ID BM1,
P_DI_EXE AS CHECKBOX
DEFAULT LIT_CHECK,
P_MAPPE LIKE BGR00-GROUP
DEFAULT 'MRP_UOM_LOAD'
NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_PATH'
CHANGING
FILE_NAME = S_PATH-LOW
FILE_NAME = P_PATH
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
MOVE S_PATH-LOW TO PARMS-PATH.
MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
AT NEW LOW.
CLEAR INP_DATA.
REFRESH INP_DATA.
Read source data into internal table
PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
ZTEXT = TEXT-007.
ZTEXT+13 = PARMS-DS_NAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
LOOP AT INP_DATA.
Reset tables for each record
BMM00 = I_BMM00.
BMMH1 = I_BMMH1.
BMMH6 = I_BMMH6.
Load structures with data
MOVE-CORRESPONDING INP_DATA TO BMM00.
PERFORM 2000_WRITE_OUTPUT USING BMM00.
MOVE-CORRESPONDING INP_DATA TO BMMH1.
PERFORM 2000_WRITE_OUTPUT USING BMMH1.
MOVE-CORRESPONDING INP_DATA TO BMMH6.
PERFORM 2000_WRITE_OUTPUT USING BMMH6.
REC_COUNT = REC_COUNT + 1.
ENDLOOP.
ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
FORM 0500_INIT_BMM00 *
Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
FORM 0000_HOUSEKEEPING *
Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
FORM 0010_LDS_NAME *
Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
EXPORTING
REPORT = TBICU-REPNAME
VARIANT = TBICU-VARIANT
IMPORTING
TECHN_DATA = VARTECH
TABLES
VARIANT_VALUES = VALUTAB
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
ELSE.
MESSAGE I001 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ELSE.
MESSAGE I000 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0040_INIT_STRUCTS *
Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
FORM 3000_START_DI_JOB *
Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
EXPORTING
JOBID = ' '
JOBTEXT = TBICU-JOBNAME
REPNAME = TBICU-REPNAME
SERVER = TBICU-EXECSERVER
VARIANT = TBICU-VARIANT
NEW_JOB = 'X'
CONTINUE_JOB = ' '
START_IMMEDIATE = 'X'
DO_NOT_PRINT = 'X'
USERNAME = SY-UNAME
IMPORTING
JOBID = ZJOBID
JOBCOUNT = ZJOBCOUNT
EXCEPTIONS
JOB_OPEN_FAILED = 1
JOB_CLOSE_FAILED = 2
JOB_SUBMIT_FAILED = 3
WRONG_PARAMETERS = 4
JOB_DOES_NOT_EXIST = 5
WRONG_STARTTIME_GIVEN = 6
JOB_NOT_RELEASED = 7
WRONG_VARIANT = 8
NO_AUTHORITY = 9
DIALOG_CANCELLED = 10
JOB_ALREADY_EXISTS = 11
PERIODIC_NOT_ALLOWED = 12
ERROR_NUMBER_GET_NEXT = 13
OTHERS = 14.
IF SY-SUBRC EQ 0.
WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
LOGICAL_FILENAME = PARMS-LDS_NAME
OPERATING_SYSTEM = SY-OPSYS
IMPORTING
FILE_NAME = PARMS-DS_NAME
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E002 WITH PARMS-LDS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0030_OPEN_FILE *
Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
encoding default. "thg191105
IF SY-SUBRC NE 0.
MESSAGE E003 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 1000_GET_SOURCE_DATA *
Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = FILENAME
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
importing
filelength =
TABLES
DATA_TAB = INP_DATA
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = W_FILENAME
FILETYPE = W_FTYP
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
FORM 4000_PROGRESS_INDICATOR *
Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT
EXCEPTIONS
OTHERS = 1.
ENDFORM.
*eject.
FORM 9000_END_OF_JOB *
Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV -
Problem while updating the forecast value in m.master by direct input menth
Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated BD 078 E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
VallabhaneniHi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni -
Problem in getting data into database with standard direct input program
HI All,
I am having problem which is not updating the records in MM01 or MM02 with standard direct input program. i have data in internal table. from that table i am trying to upload into database by using background job MRP_MATERIAL_MASTER_DATA_LOAD.
when i execute my program it is showing message job is started. then i go into sm37 and seethe job status by executing. there also i am seeing job completed succesfully.
but if i go to mm03 and find the materials are updated or created there i couldn't find the material numbers which are from internal table.
So if ny one help me it wil be great.
Thanks in Advance
Venkat NHi Anil,
Thanks for your answer, but i am facing problem is i have material no and denominator and Actual UOM and nominator field values in the flat file.....
by using RMDATIND direct input program with MRP_MATERIAL_UPLOAD as job name for background job while uploading data into database.
here i am not getting data in to database, but when i execute the job in sm37 it is showing that message job processing successfully completed...this is my status..
if u can help me in this it will be gr8ful..
Thanks,
Venkat N -
Problem while Creating BOM using LSMW Direct Input
Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Rajhi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE MATNR WERKS SELAL STLAN DATUV ZTEXT
1 388 0110 20 1 06.01.2009 SAMPLE ZTEXT
my item data :
STYPE MATNR1 WERKS SELAL POSTP MENGE
1 388 0110 20 N 1234
1 382 0110 20 N 12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj -
Problem in lsmw for purchase order (direct input)
hi friends,
i am trying to upload po using lsmw by direct input method.
only problem is it is not taking delivery date properly.
at the end error message is 'plz enter valid delivery date'.
can any one tell me why it is happning.
thanks
sonuCheck the format of your date and check the format expected.
sometimes you can have diff like YYYYMMDD, MM.DD.YYYY,...
Look at the converted data.
Hope this helps,
Erwan -
Material Master upload - LSMW direct input method - Internal Number problem
Dear friends,
I am uploading material masters with LSMW - Direct Input Method.
The materials have internal numbers.
I have four plants and I want to extend the same material in all plants.
But LSMW is creating a new material for each row.
Is there any way out or any indication I put in file to repeat the internal numbers created for all other plants?
I can create another LSMW for material extension. But I want to know whether the problem can be solved in the current LSMW?
Regards,
Avinashhttp://www.sap123.com/a/98/
Check the internal number range once.... before extending mateial... -
LSMW updating problem with direct input method
Hi!
Using version 4.0.0 of the LSM Workbench from 2001-07-01 on SAP R/3 4.7, I need to update the purchase order text and wanted to use the direct input method. I found a tutorial on SAPTechnical which I followed. All went well, the input data was converted and at last I got the message:
"Long Texts in Total : 2
Successfully Transferred Long Texts : 2
Non-Transferred Long Texts : 0"
My trials are recorded in table STXH with date and time and also in the material master change history. However, the result in the material master is that the purchase order text is NOT updated.
Can anyone tell me why this might be?Hi Santosh!
First of all, thank you very much for posting an answer. But unfortunately it was of no help. I want to update the purchase order text on a material that already has the purchasing and purchase order text views. When I compare the PO text before and after my "Successfuly Transferred Long Texts" there is no change. I hope that this make it more clear but it is still a mystery to me. -
Query Bex direct input filter value doesn't work
Hi experts,
when I use a bex report and direct insert a value in filter on the left; the report doesn't execute the request.
For exemple I would like to filter a value in 0COSTCENTER; I inserted direct value on the filter cell and the report doesn't return the aspected value.
How I can resolve this issue?
The query is based on planning level.
Thank you for any answers.
ValerioHi Leszek,
At the left I digit a value for “Centro di Costo” (0COSTCENTER); for exemple I want to digit the value 8213-01 (or IT01/8213-01) and then 'enter'... The report does a refresh but then don’t execute the filter.
The same procedure runs without error if I select the value from menu “select filter value”. -
Error in uploading the PO while running Direct Input porgram RM06EEI0
Hi all
i have written one conversion program to upload PO. Here in the program i am populating the batch input structures MBEPOH and MBEPOI and finally writing it to the unix file.
Finally when i execute the direct input program RM06EEI0
using the logical filename , it gives the error as 'Net price should be greater than 0' .
i have also checked the file in the unix directory , there the net price is getting populated correctly. Also i debugged the direct input program and found out that net price is getting passed correctly to FM ME_CREATE_PO_ITEM but somewhere the KOMP structure is not getting populated ,that is why net price becomes 0.
Can anybody please tell whether there is some issue in writing the conversion program or i am missing some parameters to be passed in MBEPOH or MBEPOI, or what has to be done.
Please help me , it is urgent .
Thanks and Regards,
SyedI have the same problem, could somebody help?
Thanx, Marian -
Tax issue with Direct Input mode of RFBIBL00
Hi, I have a problem using <b>RFBIBL00</b> (direct input mode) to create A/R invoices. There is no tax associated with the invoice, however, when I use direct input mode, instead of posting immediately, a batch input session is created. In the log, an <b>information</b> message: <i>'Specify a tax jurisdiction key'</i>. The BDC session is processed with no error.
When using Call transaction mode for RFBIBL00, the document is posted immediately but the requirement is to use Direct input mode.
There is no converted data in the BBTAX structure since the doc. does not need to post to tax account. Do I need to populate the Tax amount, Tax code and jurisdiction code in this structure and BBSEG in order to by pass the information message?
Any advice is appreciated.
- MinamiProblem solved. Just need to untie the relationship between the ITEM import structure and the BBTAX so the Direct Input program will not require a tax jurisdiction code.
-
Direct input (DINP) in Lsmw
Hii All,
I am using direct input method for uploading Material Forecasting in SAP server ...
But the problem is that , I m not able to get the error log ie im not getting the material no.
that are ended up in error while uploading. Actually, i can see the material that are in
error but im not abe to save it or download it,So as to pass it to functional Consultants.
Im using the RMDATIND program to upload the file.
Requesting all to provide some suggestion to get /capture the error data.
Thanks in Advance.
Chandanhi Venu
can you please tell me why do u want to upload data from adrc table.
thanks
abdul -
LSMW Direct input method error
Hi experts,
I created the LSMW using direct input method (PR Creation).
In the create batch input session step (executed) i am getting below
message and follwed bt processing terminated message and going out
Transaction 0: transaction code / not supported
what could be the problem ? any problem in specifying logical path .
pls let me know the solution.
Thanks
saiHi chenna,
Thanks for reply, I added the tcode and now getting the message like the session was created
but when i see in sm35 there is no seesion created and there is no log also.
what could be the reason? pls explain
thanks
sai -
Lsmw : Direct Input : 0020 Material Master :Error
hi all !
I'm onto making a lsmw for material master direct input.i'm facing the following error :
1.The field Marc-LADGR is defined as a required field : it doesnt contain an entry
2.You have not fully maintained the tax classifications.
in my flat file i have duly filled in the field MARC-LADGR
need help ,plz see if you can track wats the problem.
thanks and regards,
sachinya sachin ... as u r telling .. download from the std program... & continue the process....
my suggestion ... cross check again with ur fields of the source structure ....i mean decalre only fields .. which are required .. then do the field mapping again for the all the fields...
i believe there will be documentation for the std program .... check it & go thru with that ..map it ... wherever needed ....
try & let me know...
thanks,
manjunath ms -
Please give an example for Direct Input method in BDC.When it is used? what is the advantage and disadvantage?
Hi Khanna Renga ,
Direct Input method is used for bulk transfer of data into SAP system.It results in faster execution since no screens are processed and the SAP database will be updated directly using the standard function modules.
Better example where direct input method will be used is... uploading the data for material master.....it includes lot of views so its very much difficult to capture all the views and record the tcode and map the data in such conditions its better to go with DI methods
Advantages:
in session method or Call Transaction method while uploading the data u do the validation by fallowing the screen sequence and field sequence where as in Direct Input validations can be done set of code so this make the process very fast so its advantageous to upload large amout of data.
you always use the standard sap provided program for this.
Here in Direct Input method very important thing is structure of flat file... so to know the structure first of all you have to download the data for one record into the internal table with the use of the same program then with the use of that structure u have to desing the flat file and upload the data.
Direct Input:
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
Also have a look on below thread..
Re: re: direct input method
Re: Give a BDC example by Direct Input Method
In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not simulate the online transaction. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. Direct input checks the data thoroughly and then updates the database directly.
Hope it will solve your doubts and problem..
Reward points if useful..
Thanks & Regards
ilesh 24x7
Maybe you are looking for
-
I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password. What is the problem, please?
-
Authentication on Windows NT Server w/IIS 5
I changed the authentication files on my production server (running CF 4.5) to add in some new session variables. I did this using Dreamweaver 8, using my personal account that automatically logs me into the server (with administrator rights). In doi
-
I just bought my macbook pro last week. It's the new built in batterty macbook pro. After it is fully charged, i leave the ac power plug in always, the first time i open up my mac it's 100%, 2nd time it became 99%, 3rd time it's still 99%. My AC powe
-
Browsing different windows in the same program
Hello, I'm new to mac os and I love it. I know that I can switch between different programs with the apple+tab key. But how can I easily switch between two windows of the same program? i.e. when I open 2 internet browser windows...
-
Portlet Migration from Jetspeed to Oracle AS Portal
Hi, I need to migrate a struts based JSR 168 compliant portlet application which is currently running on Jetspeed portal to Oracle AS Portal 10.1.3. Is this possible?? If Yes then Can somebody help me to figure out the steps required for this?? and H