BEx abap query analyzer with wrong port in url adress

Hi
Starting TA RSRT you can open ABAP WEB query in separatly browser
window.
For that an url adress is generated.
Normaly it looks like <server>:8000/xxx.
One my workstation it works well & fine. In the other hand some of our
coleagues get url with a port 8100, what wrong is.
Could you explain this?
Many thanks for a feedback.
Bestr Regards
Franco

Hi Franco,
Strange... This should works or not for everybody.
Maybe you have a web dispatcher.Sometimes this is the root cause.
Well, first of all, check the note below:
>> 805344 - How URLs are generated automatically in BW
Ensure your system is correctly configured by this note.
Best Regards,
Edward John

Similar Messages

ABAP Query Quantity totals wrongly - M.Type 101+, 102-

Hi Friends,
Could any one help me in this? I created an ABAP Query for the combination of T.codes MB51 & MB52. When I see the total qty for the item which has GR and Goods return document.........say first by 101 I rerceive 5 nos and using 122 returns 3 nos. Here Query shows total is 8nos instead of 2 nos.
The same way correnponding price also shows for 8nos instead 2 nos.
Kind Regards,
Sankar.K

Hi Sankar,
You can use MSEG-SHKZG field for +(plus)/-(minus) indicator where 'H' is -(minus) and 'S' is +(plus).
I hope this can answer your problem.
Regards
Gunawan

Logon to WebGUI from Management Console with wrong Ports

Hello SDN,
I install the new SAP Management Console on my workstation. It works perfectly exept logon to abap through WebGUI.
If I cklick on to <SAP Logon...> from the context menue of the ABAP instanz, I get a browser with an URL http://<host>:50000/sap/bc/gui/sap/its/webgui. That doesn't work because the Port of ICM is 8000.
How I can setup the right port?
Many Thanks in advance
Vladimir

Hi,
many thanks for your answer, but something is not clear.
I call SAP MC with such URL http://server1:50013/sapmc/sapmc.html
The ABAP System that I want to logon is under the URL http://server2:8000/sap/bc/gui/sap/its/webgui reachable.
If I try to logon from SAP MC I get an URL http://server2:50000/sap/bc/gui/sap/its/webgui
ICM on server1
icm/server_port_0 is setup for HTTP 8000 on abap side(server2). This is ABAP only ERP 6.00 system
ICM on server2
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
icm/server_port_0 is setup for HTTP 80$$
The question is - what ICM use SAP MC in that case?
Where I schould maintene the ICM parameters?
Best regards
Vladimir

OEM discovers HTTP server but with wrong port

Oracle 9i
OEM discovers all my nodes but shows my HTTP server running on port 80 when it's actually on 7777. How to correct this? Where is OEM getting port 80 from? I have looked at the httpd.conf and other config files and can't locate the problem. Please help.
Thanks
Dave

David,
Did you ever get this problem solved? I am having what sounds like the same thing.
In my case the http server discovered is at port 443 which is the SSL port. What should be there (I think) is 7777, the actual port.
Can anyone help?
Larry

SolMan 4.0 - SCS instance allocates wrong ports

Hello,
we have a solution manager 4.0 installation on IBM iSeries (System i / AS 400).
Kernel is 700 with patch lvl 92/dbsl patch 70.
Central instance is number 50, scs instance is 51.
The system is running in so far that I can logon to it and transaction SICK reports no errors.
Examining the system more accurately revealed that the j2ee server is configured but not operational (transaction SMICM).
Looking at the running jobs, i see that jcontrol, msg_server and server0 are not running.
The developer trace of dev_ms of the central instance shows errors:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:28:07 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2547
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2547) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3173]
[Thr 1] *** ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 5
    (SI_EPORT_INUSE/67; I4; ST) [nixxi.cpp    3173]
[Thr 1] *** ERROR => MsSCommInit: NiBufListen(sapmsS01) (rc=NIESERV_USED) [msxxserv_mt. 10124]
[Thr 1] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1857]
[Thr 1] *** ERROR => main: MsSInit [msxxserv_mt. 5896]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2547) [msxxserv_mt. 5944]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The trace dev_ms of the scs instance is ok, but with wrong ports in my discretion:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:27:18 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2535
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2535) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/S01/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [192.2.1.15] VERSAP01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 1]   3 : [192.2.1.183] 192.2.1.183 (NILIST)
[Thr 1]   4 : [194.221.94.253] SAPROUTER (NILIST)
[Thr 1]   5 : [192.2.1.185] 192.2.1.185 (NILIST)
[Thr 1]   6 : [192.2.1.186] 192.2.1.186 (NILIST)
[Thr 1]   7 : [192.2.1.187] 192.2.1.187 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = VERSAP01.KVN.DE
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = KVN.DE
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsS01 (3650) ***
[Thr 1] *** I listen to internal port 3950 (3950) ***
[Thr 1] CUSTOMER KEY: >E1363402629<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The profile default.pfl looks good to me:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SAPDBHOST = VERSAP01
j2ee/dbtype = db4
j2ee/dbname = S01
j2ee/dbhost = VERSAP01
SAPSYSTEMNAME = S01
SAPGLOBALHOST = VERSAP01
j2ee/scs/host = VERSAP01
j2ee/scs/system = 51
j2ee/ms/port = 3951
rdisp/bufrefmode = sendoff,exeoff
DIR_PUT = /usr/sap/S01/put
rdisp/mshost = VERSAP01
rdisp/msserv = sapmsS01
rdisp/msserv_internal = 3950
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Any idea ?
Is anything wrong with our configuration(which we did not change manually) ?
Do we have to patch the kernel ?
Best regards,
Juergen Scheckelhoff

Hello Mr.Hermsen,
some profile parameters were set wrong by the installation routines.
SAP send me some reference profiles from a running solution manager installation and I synchronized our profiles accordingly.
I cannot remember exactly which parameters were wrong, but i guess it was one of the port numbers.
Good luck and best regards,
Jürgen Scheckelhoff
Here are the profiles sent to me from SAP:
........1........2........3........4........5........6........7.......
***********Beginning of data*************
#.*       Default profile DEFAULT.PFL
#.*       Version                 = 000002
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:33:12
SAPSYSTEMNAME = SSM
SAPGLOBALHOST = as0015
SAPDBHOST = as0015
j2ee/dbtype = db4
j2ee/dbname = SSM
j2ee/dbname = SSM
j2ee/dbhost = as0015
DIR_PUT = /usr/sap/SSM/put
1. SAP Central Service Instance for J2EE
j2ee/scs/host = as0015
j2ee/scs/system = 11
j2ee/ms/port = 3911
rdisp/bufrefmode = sendoff,exeoff
1. SAP Messaging Service for ABAP
........1........2........3........4........5........6........7.......
rdisp/mshost = as0015
rdisp/msserv = sapmsSSM
rdisp/msserv_internal = 3910
1. Login Client
login/system_client = 001
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Instance profile SSM_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:34:08
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 3
1. Number of work processes
rdisp/wp_no_dia = 4
rdisp/wp_no_btc = 2
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
1. ABAP parameters
ztta/roll_extension = 2000000000
#CL: reduced initial memory size to save resources. Increase if necessary
#em/initial_size_MB = 4096
em/initial_size_MB = 2048
abap/buffersize = 600000
zcsa/table_buffer_area = 64000000
rsdb/cua/buffersize = 16383
rtbb/buffer_length = 16383
rtbb/max_tables = 500
#RV: Sollte beim Einspielen von grossen Hopa Queues aktiviert werden
#rdisp/max_wprun_time = 0
1. Language
zcsa/system_language = E
zcsa/installed_languages = DE
1. ICM parameters
icm/server_port_0 = PROT=HTTP,PORT=80$$
1. Java parameters
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /QIBM/ProdData/Java400/jdk14
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_prope
j2ee/dbdriver = /usr/sap/SSM/SYS/jdbc/tbx/jt400.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
ms/server_port_0 = PROT=HTTP,PORT=81$$
j2ee/instance_id = ID1053262
#CL: Keep properties file, if some vm params need to be set differently than def
java/as4/keep_props = 1
1. Solman Konfiguration lt. IMG
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = as0015.wdf.sap.corp
icm/host_name_full = as0015.wdf.sap.corp
icm/server_port_1 = 25000
login/no_automatic_user_sapstar = 0
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
........1........2........3........4........5........6........7........
***********Beginning of data*************
#.*       Instance profile SSM_SCS11_AS0015
#.*       Version                 = 000001
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:35:40
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 1
1. SAP Messaging Service for Java
rdisp/msserv = 0
rdisp/msserv_internal = 3911
ms/standalone = 1
ms/server_port_0 = PROT=HTTP,PORT=81$$
1. SAP Locking Service
enque/serverinst = 11
enque/table_size = 4096
rdisp/enqname = $(rdisp/myname)
enque/snapshot_pck_ids = 100
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:37:38
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_DVEBMGS10_as0015
1. Trace level
rdisp/TRACE = 3
service/trace = 3
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Execute_01 = local CLRLIB LIB(R3WRK10)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
Execute_03 = local $(DIR_EXECUTABLE)/saposcol
Execute_04 = local $(DIR_EXECUTABLE)/DLTOLDPKGS SSM
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start application server
DW = $(DIREXECUTABLE)/disp+work$(FT_EXE)
Start_Program_01 = local $(_DW) pf=$(_PF)
1. Start syslog collector daemon
CO = $(DIREXECUTABLE)/rslgcoll
Start_Program_02 = local $(_CO) pf=$(_PF) -F
1. Start syslog send daemon
SE = $(DIREXECUTABLE)/rslgsend
Start_Program_03 = local $(_SE) pf=$(_PF) -F
1. Start internet graphics server
IG = $(DIREXECUTABLE)/igswd_mt
Start_Program_04 = local $(_IG) -mode=profile pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK10)
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_SCS11_AS0015
#.*       Version                 = 000003
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:39:04
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_SCS11_as0015
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Execute_01 = local CLRLIB LIB(R3WRK11)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start SAP locking service
EN = $(DIREXECUTABLE)/enserver$(FT_EXE)
Start_Program_01 = local $(_EN) pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK11)
***********End of Data*******************

Webi base on BW query based on Infoset comes back with wrong values

Hello:
I have a Webi report on an OLAP Universe, on Bex Query.
The bex query is based on 1 INFOSET.
When I run the webi report the values that comes back a totally wrong values.
The correct results are not brought back.
When I do a test with crystal reports to the infoset, I can see the correct values. (I'm aware crystal uses different drivers).
The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
Webi on Infoset based BW Query comes back with wrong data.
query is simple.
Pull in 3 attributes, 3 key figures, where componentkey = "111"
I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
I get many rows in webi (almost like a CARTENSIAN product).
I search a round this forum but still did not see a conclusive answer to this problem.
But I see another thread that several others faced this same issue without a resolution.
My environment.
BOE XI 3.1 SP2
No fix packs
SAP IK 3.1 SP2
HPUX-IA64
Thanks in advance for any help.
Dwayne

Was this problem ever solved?
I am having a similar problem with an infoset based query.
I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
Cheers,
Andrew

BEx Analyzer displays wrong number of decimal places after implementing BW patch

Hey folks,
we patched our BW 7.31 from PL10 to PL15 last weekend and now we got some issue with the number of decimal places shown in BEx Analyzer 7.x.
One example for KF X
Settings Info Object X
Decimal Places:                         Not defined
RSRT - Display X
Shows 3 decimal places
Query Designer Settings using KF X
Number of Descimal Places:     0 [Use Default Settings: NO]
BEx Analyzer Properties for KF X
Decimal Places:                         0
Resulting in BEx Analyzer workbook shows 3 decimal places instead of 0!
Anyone with an good idea about that?
Thanks,
Andreas

Hi Andreas,
Have you used the list calulation like "Calculate Result As Average" or "Calculate Single Values as normalization of result" in the relevant key figures?
For "Calculate Single Values as normalization of result",iIt is the known design that it is always displayed with three decimal places for normalized values, and the setting in Query Designer for
decimal place doesn't take effect.
For "Calculate Result As Average", the following note maybe relevant.
2096911 - Decimal places in query result is wrong, if average is used and display precision is set to less than 3, it will always show 3 decimal places.
Another clue is to check if the key figure is a Quantity type with unit, and what's defined in table
T006 field ANDEC for this unit.
Hope this helpful.
Regards,
Ceciclia

Problem about printing special character in bex query analyzer

Hi,
in bex query analyzer i have created one restricted key figure , in which i have substracted two date with the help of replacement path.
So i got result.
But i am facing one problem. when in both date, if one date is null or # then it is giving some big value like -734567.
But i want some special character like X instead of this big values.
So how can i do this?
With the help of if and else it can be done.
But how can we print special character in report.
Please help me
Thank you in advance

hi,
You cannot show X in a formula result. You can highlight the row using exception.
Still if you want to show X in the result then you need to create a formula variable on a char which returns X value all the times.
Then you can use the three formula variable to write a formula so that it shows the difference:
date1 -- formula variable
date2 -- formula variable
charx -- formula variable.
the formula will be
Count(date1)Count(date2)(date1 - date2) + charx *(count (delta(date1) + delta(date2))).
this would return the X value if any of the dates are empty otherwise their difference.
regards.
Arvind.

Query output using BEX and web analyzer

Hi all,
I have an issue while designing a query in query designer.......I have a sales cube in which sales for every month is reflecting .....Now i have to design a query to show month wise sales....
But for some months if there is no sale record in the sales cube for that particular month like Feb 2006, when i execute the query on this month using BEX or web analyzer , it simply says "No data Found"..............
I want to show 0(zero) in sales quantity instead of this message.....Please guide me that how can i replace this message with zero value.
regards
Hina

Dear Hina Zakir,
<b>This is the BI 7 Query designer solution...........</b>
if u want to disply even if the value is Zero then goto the query properties not the single key figures go to the entire quer property and then click the Row/columns in that Suppres Zeros in that select Do Not Suppress + Effect on Tab is there in the Select Row or column or both ................then u can ablet to c the values as Zeros..
Regards
venu

BEx Analyzer with different worksheets

Hello,
I have query with the following query structure in my BEx query designer
Characteristics Keyfigures
Project no Costcenter Jan Actual Feb Act Mar act ...Augplan Decplan
I want to develop a workbook in BEx Analyzer with each key figure on each worksheet so that i will get 24 worksheets for each month for prior year and current year.
Can you please let me know how i can implement this in BEx analyzer in BI 7.0

Hi Al,
As this is a property of the Analysis Grid, you can turn it on for the analysis grid that you insert your query in on each sheet.
http://help.sap.com/saphelp_nw04s/helpdata/en/d3/015369f54f4a0ca19b28c1b45acf00/content.htm
Hope this helps...

BEx QUERY DESIGNER AND QUERY ANALYZER

HI!!!
I want to learn to use the BEx Query Designer and the Query Analyzer, someone can help me with link, manuals, tutorials, cookbooks, everything about this?
Thanks and regards

Hi,
Please check the links below which may help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25
https://www.sdn.sap.com/irj/sdn/bi-elearning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/27388d45-0c01-0010-9ebf-9b3dd7bd4ce6?prtmode=navigate
http://help.sap.com/saphelp_nw04s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92a25985-0a01-0010-5ea0-99ff9e0a244a
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d21c1f46076bb2e10000000a1553f6/frameset.htm
Regards,
®

When using BW Bex query analyzer users cannot change reporting queries ....

Issue: When using BW Bex query analyzer users cannot change reporting queries. Any attempt to change queries results in errors.
Error: BEx Query Designer: Run-time error '-2147221499 (80040005) Fatal Error - Terminating
Impact: Business reporting is currently being negatively impacted because users cannot modify queries, cannot change filters for fiscal period and fiscal year.
OS / MS Office Suite being used: Vista & Office 2007
Backend System: BW 2.0B
Frontend System: Being a large organization, we have a controlled environment wherein all users will have the following applications installed by default:
1. SAP Client Base 7.10
2. SAP BW 3.5 Patch 4
3. SAP BI 7.10 Patch 900
4. SAP GUI 7.10 Patch 12
Does anyone has any idea as to why we are getting this error? Is it a Vista issue? Is it a front-end issue?

Just a thought - did you guys apply any Microsoft security patches before this started happening - we had a similar issue in other SAP application due to MS security update. Raise an OSS with SAP

How to create an ABAP Query with OR logical expression in the select-where

Hi,
In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
Please help me on this.. Points will be rewarded.
Thanks a lot.
Regards,
Question Man

Hi Bhupal, Shanthi, and Saipriya,
Thanks for your replies. But that didn't answer my question.
Bhupal,
You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
Shanthi,
Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
Saipriya,
Like what I have said, this is a standard SAP code so we can't do your suggestion.
I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
Thanks a lot.
Points will be rewarded.
Regards,
Question Man

Problem with logical database DDF in ABAP query

Hi All,
I have created an ABAP query via the transaction SQ01 using the logical database DDF to retrieve customer master data from tables KNA1 & KNB1. The selection screen used is the screen 903 of the logical database DDF. But now the problem is that when I execute the query, I am getting a blank value in the tax code4(KNA1-STCD4) field though there is value in the KNA1 table for this particular field. This field was added to the table by means of a customizing include. Can anyone suggest a way to get around this problem so that I can view the content of the field STCD4 in the query.
Thanks and regards,
Sarath.

I think it's not used by DDF.
so you must check it with:
check kna1-bran1 in s_bran1.
A.

Is it possible to provide an BEx Web Query with parameters based on iView?

Hi SAP Portal experts,
My knowledge of SAP Portal is limited and I ran into the following problem:
I have got about 60 BEx Web Queries which should be put into some sort of navigation. Furthermore I would like to intodruce one start page where the user can preselect common bex query variables (e.g. company code) by clicking on a map.
My approach was to put all query links into a BEx Web Application Template. The template includes a JavaScript storing the userdefined values in a cookie. As soon as the user clicks on a link the cookie values are read from that cookie and a query parameter string is set up like "&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=2100&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0P_COCD" and concatenated with the URL for the BEx Query.
My colleague wants me to put all this into SAP Portal and to create an iView for each BEx Query. How can I achieve that? I have already had a look at the iView property "parameters passed on to BEx Web Application". If I put my parameter string there, it works fine. However, I would like to replace VARIABLE_INPUT_STRING=2100 and VARIABLE=0P_COCD with the values selected by the user by clicking on the map. So how can I set up a parameter or variable in one iView and read it in another iView with a BEx Web Query???
Thank you very much in advance
Martin

I have thought about this. There are some problems here....
I cannot use the same proxy to invoke the java callout and then based on the code or handler disable it, since
1) i would have no way to enable back the proxy again.
2) Also there is some amount of message loss.
So i will have to use another proxy to do the same, but in this case
1) what would be the trigger to this proxy?
2) And how often do i invoke the java callout to see if the URI is up or not? (wouldnt that affect the performance?)
I am just wondering why did they give an offline URI option in the business service and no similar option in the proxy service, Any Idea?
Thanks

BEx abap query analyzer with wrong port in url adress

Similar Messages

Maybe you are looking for