Bex Ajust Query Warning message

Hi,
When I run by bex report in browser I get the message
"Characteristic XXX was changed in infocube ABC.Adjust the query"
I retransported the query but no change.
How do I adjust the query?

Hi,
You Can Regenerate the Query in RSRT,  give the query name, environment menu - Generate queries
or else You can supress this warning message in RSRT, if that message exists in the list.
Regards
Sreekanth

Similar Messages

  • Warning message in my bex query designer

    Hi all,
    I am getting warning message while generate a query in  bex analyzer. Can anyone let me know the procedure how to suppress those messages while running the query.
    thanxs
    haritha

    Haritha,
    In Bex select Business Explorer on the File Menu, select Settings and then select Suppress Warnings from Server. It will need to be done on each PC to remove the warning messages.
    Regards
    Gill

  • Warning Message in query result as 'Notification Number DBMAN 345'

    Hi ,
    I have a warning message while executing the query
    'Diagnosis
    Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
    There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
    For performance reasons, this filtering is unavoidable.
    System Response
    Procedure
    In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
    Procedure for System Administration
      Notification Number DBMAN 345  '
    'i am getting this error because of cutomer exit variables  on navigatioanl attributes of  Omaterial'
    I tried supressing it in  RSRT.. but unable to find the message.
    I tried  debugging and assigning enhancement points in  FM  BAL_LOG_MSG_READ.. As it is standard function module its not suggestable to do..
    can we creat custom FM ?? will it be called if we  write code to supress warning message??
    Please let me know how to use  BADI'S  in order to supress the error message that appearing in query result?
    Thanks All.

    Hi,
    The warning is raised due to the following reasons:
      - you have a selection in the filter of a navigation attribute
      - in your DSO you do not use the option "SIDs Generation upon Activation"
    If the option "SIDs Generation upon Activation" is not flagged,
    you may get char.values for an Infoobject in the system not
    having any SIDs. As a result you may see in the report less data as
    expected.
    For example we have Infoobject A with its Nav.attribute B
      Infoobject A   Nav.attribute B
      12             13   ->> has a SID in the X-table
      11             10
      9              13   ->> has no SID in the X-table
    If you define a selection on B =13 in the query, you only get infoobject
    A with key 12 displayed in the result, since only B =13 has a SID
    in the relevant X-table.
    The warning refers to this behaviour and cannot be avoided unless you:
       - flag the option in the ODS-settings
       - or remove the filter defined on 0MATERIAL__xxxx
    Thanks,
    Venkat

  • Supress warning message in Query Analyzer after free characteristic removed

    Hi
    I have a query and several workbooks looking to the same query.
    When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
    Is there any way to supress these warning messages?  I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company.  Is there a way I can supress the warning from the query?
    We are running 3.x for this particular query and report.
    Thanks

    Hi,
    In RSRT, you have an option for the suppressing the messages.
    Have a look on the below link -
    http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
    Regards,
    Geeta

  • Warning message in Query "Currency field CCCUR-WAERS will not be filled"

    Hi
    I generated a infoset using table COSP, when I click in generate infoset, sap shows this warning message:
    Compare field group fields with Data Dictionary
    Currency field CCCUR-WAERS will not be filled
    Currency field TKA01-WAERS will not be filled
    How can I fix the value for fields CCCUR-WAERS and TKA01-WAERS in my query ? when I execute the query this dont show the correct values for some fields because waers field.
    Thanks & Regards
    Ramesh Narayanan

    Dear,
    Yeah system shoots this warning because system is unable to get the currency key for the amount in the report, may be because the primary table is unable to provide this information.....better take currency key by joing any other header table....
    Not a big worry
    Regards,
    Chintan Joshi

  • Getting the Warning message while searching in the Query panel

    Hi all,
    getting the following warning message while searching something through Query panel.
    <SimpleSelectOneRenderer><_getSelectedIndex> Could not find selected item matching value "VwObj_SearchNCCriteria" in QueryRenderer$2[UIXEditableFacesBeanImpl, id=null]
    can anybody help me in filtering this warning message
    Thanks & Regards,
    Veeresh

    Hi Frank,
    the JDeveloper version is JDeveloper Studio 11.1.1.3.0
    I have a View object View_Query for that i have added View critirea as View_Query_Critirea.
    I dropped the Critirea as Master-detail table in the page.
    when i try to search anything in the master-detail table I am getting the warning message which i mentioned in the original post.
    thanks,
    Veeresh

  • Office 2010 BEx warning message  Worksheet BExReporsitory Sheet is protecte

    Hi gurus,
    we upgraded to Office 2010 and when opening an IP-Layout we get the warning message Worksheet BExRepository Sheet is protected without supplying password. When you confirm you can continue your work.In excel 2003 nothing came up. Can anyone tell me how to correct this or surpress this?
    We are on Fronend Patch 201. There the issue occures. I thought it was a bug in FEP 201 maybe so i upgraded to FEP 401 but the warnbing message persists. Can anyone help or give me a hint? 
    I dont want it to do it for all IP-Layouts seperately with surrpress messages.
    Why does this happen?
    Thanks and regards,
    Murat

    Hi Murat,
    Please take a look at SAP Note 1498919.
    This Note contains the limitations with Office 2010 and BEX but also contains workarounds for using Office 2010.
    Hope this helps!
    Kind regards,
    Karen

  • Warning message about CMP problem when launching query - how to suppress?

    Dear Experts
    How can I suppress warning message that did not stop the query from running?
    I encounter this message when 1st launching it. The next run , it does not show. But if user run it  i think may still show. How to suppress it?
    The message is :
    =================
    Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
    In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
    Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
    For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
    System Response
    Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
    Procedure
    When working with important MultiProviders, you should always avoid characteristics with CMP problems.
    ====================
    Please advise how to address CMP problem error message when launching query.
    regards
    Pascal

    Hi Pascal,
    Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
    One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
    You can see the data even if MP is not active on analyzer but not on RSRT.
    Hope it helps.
    Regards,
    AL

  • IE warning message - Integrating Bex WEb and BPS Web

    Hi all,
    I've implemented the "how to" in call BEX web from the BPS web.  When I move to the tab page of the bex web report I find that an  IE warning messages is displayed for each variable I pass.
    I'n not sure how to turn off the warning message.  I have looked in IE but can't see anything obvious.
    Any suggestion would be helpful.
    Regards 
       Karen

    Fixed

  • Suppress warning messages in Bex Web reports

    Dear All,
    I have developed some reports in BI. All these reports have similar variable screen. These are two in number - one for 'employee id' and other for 'Date'.
    For these reports - if the user does not enter any of the variables, the report will not execute. That is, he should enter either of the two.
    To exhibit this functionality, I have written following user exit in EXIT_SAPLRRS0_001.
       IF I_STEP = 3 .
          LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'EMP_PS' OR
                                                         VNAM = 'NID_OPT' .
          ENDLOOP.
          IF SY-SUBRC NE 0 .
             CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
                  EXPORTING
                  I_CLASS  = 'BRAIN'
                  I_TYPE   = 'I'
                  I_NUMBER = '629'
                  I_MSGV1  = 'Employee(PS) or National ID'
                  EXCEPTIONS
                  DUMMY    = 1
                  OTHERS   = 2.
             RAISE NO_PROCESSING.
          ENDIF.
       ENDIF.
    The above piece of code is working absolutely fine except with a warning message - 'Variables contain invalid values'. This warning message is not required and I need to suppress it.
    I checked in RSRT for this message so that I can suppress it there but this particular message is not available there.
    The line RAISE NO_PROCESSING is responsible for this. We cannot remove this as it is required to call the screen again if someone does not enter any value.
    Please suggest as I have searched all the threads but not solved my issue.
    Srinivas
    Edited by: Siegfried Szameitat on Nov 5, 2008 9:39 AM
    removed points offer as it is against the rules.

    Hi,
    I tried to do the same in BeX Analyzer, but no change. Actually this seeting is for system generated messages.
    my message here is generated from the function module.
    Thanks

  • In WAD getting warning messages "Query was changed"

    Hi All,
           After I changed my query in WAD, Iam getting the warning messages in top of the page in web (used WAD)for all charcaterstics and keyfigures .
    Can anyone please suggest how can I avoid these warning messages?
    Thanks in advance,
    regards,
    Govind

    Govinda:
    In WAD, Open your template. In your template properties(Not web item properties, dont select any web item, just the template) There are 2 check boxes to suppress system messages and system warning. Save and execute, you should be okay.

  • Getting warning message when running BW Report

    Hi ,
    When i am running saved query iam getting warning message pop up and when iam clicking ok button iam getting data.
    My query is there is any way to remove that warning message pop up message?
    Thanks in advance

    Hi,
    You can suppress warnings for the querries :
    - In Bex you teel to go to the toolbar and suppress warning.
    - if u r using Web Template then go to the Template properties and tick the checkbox for suppress messages.
    Hope this helps

  • Warning Message - Conditions with Result Rows Suppress

    Hi All
    I created a query with conditions and 'Suppress Result Rows - always '. When I run the query in Bex, I get this warning message showing me that conditions exist with result rows suppressed '. Is there a way to avoid getting this warning message.
    Thanks

    Hi Krishna,
    If you want to suppress the message for all users centrally for this particular query, you can do so in RSRT. Put in your query technical name and click on the Messages Button. Check as required to suppress.
    Hope this helps...

  • How to avoid warning messages in jump targets

    How to avoid the warning messages while using the jump targets from BW to R/3 ?
    example of warning message is as follows .
    Warning Selection for ABSTA cannot be uniquely assigned.
    RSBBS setting is done for the multiprovider & uses the info source 2LIS_11_VAITM .

    try doing the following:
    1.you can suppress "Settings > Suppress warnings from server" messages on ur BEx toolbar .
    2.Go to transaction RSRT, type in the query, click on the messages button, and suppress all messages
    3.In RSBBS, go to the sender query in change mode. There should be a tab in the middle column where you have to give your infosource name..
    For. eg If you want to jump from Cost centre report (BW) to Masterdata transaction in R/3, you ust assign this particular infosource in RSBBS settings.
    4.Apply note: 971614 or 975164 or OSS : 1013370 if applicable.
    Reagrds
    Dhanya.
    Assign points if this helps!!

  • Suppress Warning Messages

    Each time i make any change to the query and execute the query on Web I see message like the Query has chnaged etc.I tried to suppress these message by making the "Warning Visble" and "System Messages" to OFF in WAD. But still i get these messages.We are on NW2004s.Any suggestions?

    Have you tried this:
    How to suppress BEx warning messages…
    1)     transaction RSRT
    2)     transaction SUPPR_ALL
    3)     check message to be suppressed
    4)     save
    5)     this must be done in all clients where message needs to be suppressed.
    This affects all warning messages.
    You can suppress a BRAIN message for ALL queries. It is included in Support Pack 12 in Netweaver 2004s. If you are not to SP 12 yet, you can implement OSS note #1009903.

Maybe you are looking for

  • How can I change font size in iCal 3.0.8?

    How can I change font size in iCal 3.0.8?

  • Delivery Quantity in VL02N

    Dear All                 I have  created an Intercompany STO . Created the delivery in background using VL10B with refernce to PO. Now in VL02N, system allows me to change the delivery quantity . Say for example, in my PO the STO quantity is 10. Syst

  • Integrating checkboxes in table.....

    Hi, I have a table which is populated using a BAPI. The fields are diaplayed as InputFileds(editable) so that the user can edit them. Whenever a field of a row is edited, the user has to click a CheckBox next to it, to indicate that he/she has edited

  • Error in PKGBUILD directfb from AUR

    helo I add in PKGBUILD: dependency linux-fusion +  --enable-multi but I have this error during compilation: /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../lib -I../../include -I../../lib -DDATADIR=\"/usr/

  • Persisting an instance of the many side of a in one to many relationship

    It seems as if most books only tell you how to setup the relationship for a one to many relationship but seems to fail to tell you the appropriate way to persist in this relationship. So, I have a parent class with many child classes. Also, I am usin