Bex Analyzer 3.5 error

Hello,
When I go to properties by clicking right button of mouse on data field, I'll receive error " Run-time error'13'.
Can anybody help to resolve it?
Vista, Office 2007.
Regards,
Romano

Romano,
If you are not alrerady using SAPGUI 710, you will need to upgrade. (See [https://websmp106.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000227152003E].)
Hope this helps...
Bob

Similar Messages

Working in BEx Analyzer but giving error dump in Web Analyzer

Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and help

Thanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again

BEx analyzer - report execution error

Hi all,
while running on BEx Analyzer we encountered an error which gives communication error with the Bw server failed due to RSR_NET_RESULTSET_GET_S error. anyone has an idea to resolve this issue?
Thanks in advance.

hi
Thanks for the reply.
We checked the connectivity and it was oki..
The problem arise when executing reports in development client. production reports are working fine.
BEx installation check is also performed and found no errors.
Trace file indicates as follows :
Trace Started as: 4/3/2009 11:40:14 AM*
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7100.1.602.1292
BExCheckFrontend.CheckFrontend: No Check performed (20090402) 0
Conflicting workbook ids: iWBid: , Property: 7B2UOAYFBA2MLMWMBSDZJDSF0
4/3/2009 11:44:02 AM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Please let us know a solution ..
Thanks!

Bex Analyzer-No space error on refreshing the Workbook

HI all,
I am trying to execute a workbook with below fields
Parner ID,Cus Name,Market class and volume.
The requirement is to show the top 5 customers in the workbook.As there are huge volume of records I just filtered on Market class and executed the query and applied the condition on Partner ID and volume then came back and removed the filter and everything is fine and showing overall top 5 customers.
When I closed that workbook and trying to refresh it then it is showing No Space error .I am just wondering what could be the reason for this.Any help is highly appreciated.
Thanks in advance
PV
Edited by: S VR on Feb 6, 2012 4:35 PM

1. Try creating aggregates & rollups, if data is very huge, BASED on the query.
2. Check OLAP cache by the RSRCACHE. Check the report/query performance in BEx/HTML via RSRT.
3. Do some research on the query properties, fine tune; don't just drag drop cios. Try with minimal restrictions.
4. For Top-N type series, you can use APD also for better & faster analysis.

Error in running query in Bex Analyzer

Hi All,
I faced some problem in running the query in Bex Analyzer, when I run
the query in the Bex Analyzer, there are error messages indicates that
the query is fail to load. Before that all the query can be run without any problem.
The details for one of the error msg are as follows:
<b>Diagnosis
Variable 0P_MATBK has the processing type "Manual Input/Default Value".
However, it is not input ready, and no default value has been specified.
System Response
Procedure
Make the variable input ready or specify a default value.
Procedure for System Administration</b>
Any1 can help? Thanks.

Take a look at this link...
http://help.sap.com/saphelp_nw04/helpdata/en/55/589b3c494d8e15e10000000a114084/content.htm
For the variable wizard...
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
To make it Ready for Input...
In the variable properties window, Check "Ready for Input".
Message was edited by:
Jerome

Error message during BEx analyzer execute

Using BEx analyzer, system show error message like below:
Variable 0P_FVAEX could not be replaced;
Program error in class SAPMSSY1 mehtod: UNCAUGHT_EXCEPTION
System error in program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET:VARIABLES_SUBMIT(see long text)
Who can solve this problem? Thanks!
Message was edited by:
Almini Sanbra

Dear sanbra,
We have faced the same error and its resolved after applying the
Following:
I have applied the following Note
1079186 Error when you filter by characteristic values
Please also apply the following patches to your system:
Support packages and patches ->SAP netweaver->SAP Netweaver->
SAP Net weaver 2004s->Entry by component->BI java
Update with the latest patches
1)BIBASES12P_4-10003477.SCA Patch for for BI BASE SERVICES 7.00 SP12 4
2)BIWEBAPP12P_4-10003476.SCA Patch for BI WEB APPLICATIONS 7.00 SP12 4
3)BIIBC12_0-10003495.SCA SP for BI INFORM. BROADCASTING 7.00 0
Regards,
Suman Raju.
***********IF useful some points please***********

Error when starting Bex analyzer

Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontus

hi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls.

A critical error has occurred in BEX Analyzer

We have recently upgraged the SAP GUI to 710 Patch 12
Excel 2003 on Excel 2007
BW is on SAP_BW at 700with Patch2-bi710sp08_800-10004472
When I am trying to execute a query through BEx Analyzer and i am getting the error:u201DSystem Exception thrown while marshaling RFCTYPE_CHAR to .NET typeu201C, error occured while communicating with the BI server. As a result, the system has been disconnected from the BI Server.I was able to execute the same query through Query Designer and also see the output. Output had around 2000 pages.
Edited by: sunil sharma on Sep 30, 2009 2:46 PM

Hi,
Can you re try with MS office /SAP GUI (with Full options) reinstallation.
Thanks,
Prashant

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
   Dim lRange As Range
   Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
    onAction = True
    onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
    onAction = True
    Call Sheet4.BUTTON_55_Click
    onAction = False
End If
exit_handler:
    Exit Sub
err_handler:
    MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
    Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

BW Server Error when running Query in BEx Analyzer

Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
<b>ERROR MESSAGE</b>
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant

Error Message while opening workbook or Query in BEx Analyzer

Hi all,
Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
Thanks and Regards
Mui Kanva

Hi Mui Kanva,
Does your problem occur in a copied system?
I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
Please check to activate your source system?
We accept the error messages in our QBW and did not activate the RFC connection.
Regards
Andreas

BW ERROR while calculating local formula in Bex analyzer

Hi gurus,
Their is an error comming up on a report which is opened in Bex Analyzer. When we create local formula i encounter this error.
It says"
"Program error in class SAPMYSS1S method :uncaught exception "
"System error in program SAPLRRK0 and form DELETE_FST-01"
Not sure of why this error is comming up.
DO we need to update a OSS note for this.
Please suggest .
Regards,
Balaji Raj

Search SCN & Marketplace.

Error when launching BEx analyzer from Portals

BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.

Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
●      Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
           test
           Data=BX2,CONAJP,EN,mikoyan,17,,,250,
           9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
●      The Transaction Code for all workbooks is RRMXP.
●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.

Error when using BeX Analyzer 7.0 with Excel 2007

When i try to execute a query in BeX analyzer 7.0 and my microsoft excel version is 2007, there will always have a fatal error showing. However, when i use the Bex Analyzer 3.5 , i could execute the query.
Anyway to solve this problem?

You need to do the following
Identify the SAP GUI version you're using, 6.40 or 7.10, and the patch level.
Identify the BW or BI Add-on and patch level of it.
From there, check to see if the versions you have actually support BI 7.0 and Excel 2007. Reliable Excel 2007 support requires failry current patch levels of both the SAP GUI and the corresponding BW/BW Add-ons..
Do you have access to a PC that has a more recent version of the SAP GUI and BW/ BI Add-on? If so, try using that PC and see if you still have the problem.

Bex Analyzer 3.5 error

Similar Messages

Maybe you are looking for