Bex Analyzer 70 opens query but does not display results

Hi Gurus,
My computer is windows XP 2002with Service Pack2. I have MS Office 2003.
My SAP GUI is 7.1 with SP 5. ( I am unable to install Windows XP SP3 on my computer).
70 Analyzer is not working for me. When I log in, the XL sheet comes up but the Bex realted icons are not showing up.
When I open 3.x Analyzer, it works fine. The XL has BEX icons andI can open the query and get results.
Any suggestions are greatly appreciated andI would award points.
Thanks in advance.

Rao,
This is common problem.
Try to get latest patches in 7.0 and u can take help of any Basis person.
bhaskar

Similar Messages

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

Bex Analyzer 3.X workbook does not show workbook title in Excel toolbar

Well,
We have just migreatd BW 3.x to BW 7.0 and when opening a workbook
in Bex Analyzer 3.x , Excel does not show workbook title on Excel
toolbar.
Instead of the workbook title, appears: "xSAPtemp" followed by some numbers.
When I open the same workbook in Bex Analyzer 7.0 the problem
does no occurr, but, we won't migrate and use new Bex Analyzer
at this moment.
Anybody can help me ?
Tkx,
Ivan Rocha
SAP BW/SEM Consultant.

Thanks for anwering friend.
But this note is not avaiable yet.
Kind Regards,
Ivan Rocha

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

FF loads but does not display

Since the upgrade to FF3.6, I've had several annoying glitches.
1 Dclick desktop icon, FF loads into memory, but does not display. End task. Then Dclick the icon again. This time FF loads and displays normally.
2. After closing FF with Save & Quit, next time I open FF, error message : "Well this is embarrassing, can't recover tabs". Start new session. FF opens with last tab instead of default site.
3. On some sites I click icons and nothing happens. Sometimes other icons on same page will open, but most won't. Internet Explorer will open the same icons, so the Problem seems to be in FF.
Am I the only one with these nuisances? Any help will be appreciated.
== This happened ==
Every time Firefox opened
== after upgrade to FF 3.6

Hello John.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
I see problem:
I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
Anyone have ideas on what the issue could be? Thanks!
Some Info:
MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
Mac OS 10.8.3
Audition CS6 5.0.2 Build 5
and reply:
Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting. If that fails, we can continue troubleshooting.
I have the same problem as the author writes. But these actions do not help

Unfortunately I believe that requires purchasing the new version, and I do
not have budget approval for such a purchase.
On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

TS5148 Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
However, I suspect you zapped the Mini, maybe the lower voltage part since you siad the fan works.
The power surge could have went into HDMI and damaged the TV.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Firefox loads but does not display

1. When I double click the Firefox icon on my desktop the firefox.exe application loads (per the Task Manager) but it does not display. I have to use Task Manager to end the process. FF will usually display on the second try, but I often get a "this is embarrassing" message. This has been going on fore several months.
2. I don't know if this is related to the loading problem, but I frequently have to shut down & restart FF because some Bookmarks don't work when I click on them. Usually my Home Page icon at the top will work, but those in the Bookmark sidebar don't.

I am surprised that 17 other people have this problem and no one has any ideas.
Basically, I have had to abandon the use of Firefox and use IE ... is this a Microsoft conspiracy? I really like Firefox ... I am devastated.

Clicking update opens apps, but does not update them

When I click "update" in the app store, the app that should update opens, but does not update.
DEVICE: I am using an ipad mini with iOS 7.0.6 and 5.6 GB of storage available. I don't have any kind of app manager apps or anything like that.
THINGS I HAVE TRIED:
rebooting
closing all apps and rebooting
signing out of app store, closing all apps, rebooting, and signing back in to app store
deleting apps to create more space
changed app store settings to update automatically

Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345&#12552345
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others.

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Clicking links in apple mail opens firefox, but does not go to the actual link.

Clicking on links in Apple Mail opens/switches to Firefox, but does not go to the page of the actual link. It just loads the homepage or stays on whatever page I was on before. Links work fine when I switch my default browser to Safari, so I think the problem is with Firefox, not Mail. Downloading the latest version of Adobe Flash seemed to temporarily fix the problem, but it stopped working within a day or two.

Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345&#12552345
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others.

Outlook 2010 loads but does not display on monitor

Very strange problem. When I click on Outlook 2010, the splash screen appears and it seems to load, but does not appear on my monitor. Task Managerr shows the application is running, so I guess it is there somewhere. All the other Office 2010 programs work
fine.
I am running Win 7 Professional 32bit, dual core 2.7 cpu, 4 gb ram. Everything else works fine. I was having a problem with Outlook 2003 crashing and had not tried Outlook 2010.
Have the same problem in Safe mode.
I did run scanpst.exe and it only found (and repaired) a few files that it felt were not important. I transferred my .pst file to my wife's computer and her copy of Outlook 2010 opened it fine. I used her computer to delete all items in the
"deleted" file. My total pst file is about 142mb. I have defragmented this hard disk. I don't have a Win7 installation disk because I downloaded the Office 2010 file and used a legitimate key to activate it
I think there is a simple answer. Appreciate your help in finding it.

I found my problem.
“Add-ons” were the source of the problem.
I believe there was a conflict between two programs:
Norton’s Security Suite and AnVir Security Suite.
Both were trying to scan my incoming e-mail.
I uninstalled AnVir, reset Outlook back to its original configuration (i.e. reversed all the changes I described above), and my problem is gone.
Not sure why this problem took so long to appear as both programs had been install for at least a month without issues.
I used AnVir and ZoneAlarm for over a year together without issues.
However, about one month ago, I uninstalled ZoneAlarm and installed Norton’s Security Suite.
In any event, uninstalling AnVir solved the problem.
Uninstalling Norton’s and keeping AnVir would probably work as well.

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

Bex Analyzer 70 opens query but does not display results

Similar Messages

Maybe you are looking for