Bex Analyzer doesn't work

Dear All,
When I try to run the BeX Analyzer, either from Start->Business Explorer->Analyzer or from RRMX transaction,
I can't open any queries/workbooks and I see all the icon in German.
The other components (Query Designer, Report Desinger) and the BeX 3.x as well, instead, work properly.
I have the following environment:
Windows XP with SP2
Office 2007 Pro
Sap GUI 7.10 Level Patch 14
Any suggestions?
Thanks in advance
Alessandro

you can find more info with the following links...a lot of information on the add ins is available on sdn and oss
BEX Analyser fails with Excel 2007 Professional Plus
Problem in opening query in excel 2007
Bex Add on Excel 2003

Similar Messages

  • Workbook in BEx Analyzer doesn´t open

    Dear all,
    I´ve a problem, because I have a user on the bw and I work with the BEx Analyzer.
    When I open a special workbook there comes a white screen and then nothing.
    I deleted the user I´ve used and created the user new but still the same problem.
    But when I create another user id the problem doesn´t exist.
    What can it be?
    Or are special user parameters set in the sap bw? because I have not set any parameter

    the authorizations are ok.
    I´ve made a authorization trace with ST01 and that´s not the problem.
    A few weeks before the problem doesn´t exist. But after a few weeks I´ve opened the workbook and it doesn´t open.
    Is it possible to delete the user but that all things of the user will be deleted like entrys in tables of the customizing where the user is in?

  • BEx analyzer don't work move columns in report (like drill down)

    Hi
        I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
        I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                               <--
        But this time it's not possible...
        Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
        It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate.. 
        I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
        Could you help me please?
        I will appreciate your help and I will assign points for your answers.
    Alice

    Hi Alice,,
    This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
    Hope this helps.
    Shakeel.

  • MS Excel in the Bex Analyzer is not working

    HI
    If  I  start Bex Analyzer (BI7.0) ,  MS Excel is not working.
    So There is no userid  pop screen on the MS Excel Screen.
    Whats' wrong ?

    Hi,
    Which version of excel are you using?
    Try with the SAP GUI 7.10 with the latest SAP BI Addon Component. You can download it from SAP Service Market place.
    Downloads - Support Packages and Patches - Entry by Application Group - SAP Frontend Components - BI ADDON FOR SAP GUI - BI 7.0 ADDON FOR SAP GUI 7.10 .
    The latest patch level for SAP BI Addon Component is 1300 (bi710sp13_1300-10004472.exe).
    Hope this helps.
    Regards,
    Hari.

  • Button in BEX analyzer does not work

    Hello Gurus,
            I can open analyzer, but all the button for analyzer (such as open) do not work.  will you please what 's wrong with it?
    Many thanks,
    Frank Zhang

    Hi
    Try this sapnote_0001121263
    Edited by: Thorsten Kuhn on Dec 12, 2008 2:09 PM

  • IP - Issues with Input Query: Works on Bex analyzer but not on Web

    I am doing the following:
    Created a Aggregation level for a multi provider which has only real time infoproviders associated with it
    Created the query using Bex Query Designer availing all the options for planning
    When I execute this query it executes using a web template and does not open up the Key Figure cells for input, I had tried using the Web Application designer with Save button but still the same issue
    I tried the same on Bex analyzer and it works fine
    Please help to resolve the above issue.
    Thanks in advance.

    Hi Ram,
    Cells should be input enabled on the web just running the query. No need to create a Webtemplate, altough you need to have the webtemplate to be able to use the "save data" function.
    Maybe your query is not input ready at all, and you're misinterpreting analyzer layout.
    To test this, please enter some plan data in analyzer, right click and choose "save".
    Please check if data is written to the real time infoprovider.
    Hope this helps you.
    Regards,
    Miguel P.

  • The BEx Analyzer cannot generate VBA code due to the security settings

    Hello experts,
    when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
    Diagnosis
    The BEx Analyzer cannot generate VBA code due to the security settings.
    System Response
    VBA code is not generated.
    Procedure
    Choose Tools -> Macro -> Security.
    On the Trusted Publishers tab page, select Trust access to Visual Basic project.
    Choose OK.
    Close the BEx Analyzer and continue working as before.
    Access to Visual Basic project is only needed when generating VBA code.
    This only takes place in design mode or when 3.x workbooks are upgraded.
    Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
    I use SAP NetWeaver 7.0 together with MS Excel 2007
    Thanks
    Axel

    Hello experts,
    I am an additional person interested in the way this issue was solved.
    I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
    Regards
    Guillaume P.
    EDIT :
    Solution found : I applied the bi710sp10p_1001-10004472.exe patch
    (downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
    Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM

  • BEX Analyzer - Query Crashes Problem

    Dear all,
    I have consumption of 5 million customers. What i need to do is to group consumptions depend on groups:
    Lets say 0-100 USD 100-1000USD  1000-5000 USD in bex analyzer,
    my query works fine with less data, however when i run with 5 million customer, bex analyzer crashes when running query.
    What can i do that? should it be reletaed with ram? or olap cache? How to run query successfully?
    Thanks

    Hi
    Excel 2007 has got only one million no of rows. restrict your query as much as possible. We also faced the similar issue when executing query based on articles.
    Try creating different queries based on groups such as customer group or material group then execute. your system performance drastically goes down if you execute such a big query without many restrictions.
    Thanks
    Srikanth

  • BEx Analyzer error in loading DLL

    Hello I have problem with BEx Analyzer. Each time I try to open it, there is an error message: 
    Microsoft Visual Basic
    Error in loading DLL .
    Last weak it was working! Do I need instal latest patch or what happend?
    Thanks for reply.
    Edited by: Marcel Horkovy on Mar 29, 2008 4:17 PM

    Problem solved. I instaled MS Visio (MS Office) but last weak I uninstaled it. BEx Analyzer wasn´t working. So I tried to instal MS Visio again. And here we are. BEx Analyzer is working. I uninstaled Visio again and BEx Analyzer is still working.
    Edited by: Marcel Horkovy on Mar 29, 2008 5:38 PM

  • BEx Analyzer 7.0 formatting

    Hi Experts,
    I have an issue when creating workbooks in BEx Analyzer 7.0.
    Most of the times when I include a query in the workbook (with the Analysis Table) everything is fine with the formatting. But for some queries the formatting in BEx Analyzer does not work, and I get a table without any default formatting. The formatting I am talking about is the default formatting which is achieved by setting the tick mark for "Transfer formatting" in the Analysis Table.
    Does anyone know what could be the issue here ?
    Thanks Mikkel

    Hi all,
    Found the solution myself. There is a tick mark in the query designer called "Adjust formatting after refresh" which was not set for the queries that did not work.
    Thanks Mikkel

  • Start BEX via RRMX doesn't work

    Hello
    BW 3.5 /SAP GU 6.2
    It is possible to access bex via system-> program-> BEx -> analyzer.
    However transaction RRMX doesn't start BEX . There is also no error message. But the EXCEL Process starts ( seen in the Windows Task Manager) and disappears immediately.
    I have also checked authorization, where everything is ok.
    Please has anyone a good idea how to solve or at least some investigation ideas.
    Best regards
    Christian Baumann

    > Hi,
    >
    > First try this->
    > Open business explorer through the start menu.
    >
    > If not, then Restarting the BW server will work.
    >
    > Regards,
    > San!
    Hello
    Thanks a lot of your answer. Perhaps I didnt write all important information on this issue down.
    It is a user, who is not able to start Bex via RRMX. However when I start RRMX it works perfectly and we are on the same platform.
    Do you have another idea?

  • BEX ANALYZER NOT WORKING

    Dear Expert ,
    i have installed sapgui 7.10 on windows 7 and also installed patch 16 for sap gui . sap gui working successfuly and connect to the server .when i open the bex analyzer and want to open any query , no system is shown whom i can connect it is blank and when i try to enter the username and password manaually it gives error .
    Error Group
    RFC_ERROR_PROGRAM
    Message
    Ent
    <deleted by Moderator>
    Edited by: Siegfried Szameitat on Jul 6, 2010 3:19 PM

    Hi Faisal
    Even I faced the same error while using SAPGUI 710 on Win7 with Excel 2007. You can try to get the latest Patches of the BEx 7.0 Addon and BEx 3.5 addon.
    In case it still doesn't work, I tried this work around and it worked.
    1. Login to the BW System using SAPGUI
    2. Run the transaction RRMX and it will start BEx Analyser and you would be connected to the BW System (So no login reqd)
    Please note that I didn't have problem with Query designer, only BEx Analyser was giving problem.
    Also if you are able to solve the problem, please update the Process you achieved. There is problem in using BEx Analyser with Win7-Excel 2007/2010 for now. Let have a work around at least till the time SAP/MS Fixes this.
    Regards
    Abhishek

  • BEx Analyzer buttons withing planning don't work

    Hello,
    I tried to create a little planning application with BEx Analyzer. For this I tried different ways (my last try using: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954) but my problem is that the created buttons don't work.
    If I enter a value into the key figure field and press "refresh data" or "save data" in both cases the value is set back to 0 and my entered value doesn't appear anywhere.
    I checked the input-ready query by using the Query Designer. Both key figures can be changed by user entry or planning function. 
    Are there any other things I have to check or change?
    Thanks for your help!
    Bettina

    Hi D,
    but if it would be locked it wouldn't be possible to enter a value - would it? I can add a value into the field but afterwards when using the button it disappears and becomes 0 again.
    Here's a more detailed description:
    I created a input-ready query on a aggregation level which contains sales man number, calender year/month, customer number and planned turnover.
    I opened this query with the BEx Analyzer and executed the steps described in the PDF for which I added the link before in my first post in this thread. I implemented this HowTo until the popup messages.
    I did some planning tries before on the planning wizard in the portal . There it was possible to add values (my test data I also created with the planning wizard but without adding a turnover value) and to save them.
    There's no other planning function implemented yet. For the first step I just want to have the possibility to enter turnover values manually by using the workbook with the input-ready query. Nothing more.
    Bettina

  • BEx Analyzer not working in SAP GUI 7.10

    Dear All,
    BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
    OS: Windows XP SP2
    Installed the following softwares (in the sequential order):
    1. Microsoft .Net Framework 2.0 SP1
    2. MS Office 2003 (without any service packs)
    3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
    While BEx Analyzer 3.5 runs fine, 7.0 does not.
    Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
    When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
    I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
    Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
    Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
    Thanks and Regards,
    Sachin.

    Hi All,
    This problem is due to .NET 2.0 assembly(nothing but .dll's),
    Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
    If it does and still getting the error, then follow these steps,
    1) Uninstall office03
    2) Uninstall GUI
    3) Uninstall .Net 2.0
    4) Reboot
    5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
    5a) Reboot
    5b) Install .net1.1
    5c) Reboot
    5d) Install .net2.0
    5e) Reboot
    6) Install office 03
    6a) Reboot
    7) Install .PIA's (O2003PIA.MSI)
    7a) Reboot
    8) Install setupall.exe for GUI
    9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
    10) Reboot
    Let me know if you encounter any problems.
    OR....
    Update the Latest Patchs of GUI & Bex.
    BI710SP03_300-10004472.EXE
    bi710sp04_400-10004472.exe
    gui710_6-10002995.exe
    Hope it helps you...
    @shaik

  • Working with documents via BEx Analyzer not using the portal

    Hello,
    i read that we are able to create (work) with documents (comments) via
    BEx Analyzer. When i want to add a comment how it is described in the
    help we get connected to the portal. We dont want to use the portal for
    that. Therefore we searched a way to skip the portal. We read that in
    BW Versions before 7.0 the portal was not connected but since 7.0 we
    have the portal connectivity, but it should also possible to not use
    the portal and to access directly the BI Server. I searched for the
    Customizing to do so but i could not find it where to switch to the old
    logic.
    And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
    Can anyone give me a hint?
    Kind regards,
    Murat

    Hi Murat,
       We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
      In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
    Awaiting for your reply.
    Thanks,
    V.Senthilkumar

Maybe you are looking for