BEx analyzer don't work move columns in report (like drill down)

Hi
 I have an issue on BEx Analyzer... When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
 I did this function before.. when the poin of the mouse it's convert with other draw... like -->
 <--
 But this time it's not possible...
 Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
 It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate..
 I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
 Could you help me please?
 I will appreciate your help and I will assign points for your answers.
Alice

Hi Alice,,
This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
Hope this helps.
Shakeel.

Similar Messages

How to Hide/show the columns data while doing Drill down or drill up

Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
Venkat

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

Column selector addition on drill down.

Hi,,
Problem: Can we dynamically add column selectors for those column which appear after drill down...
Details:
we have a report where we have 3 columns,
A, B
1st & 2nd columns have selectors on them...
1st col -> Select A or B
2nd col -> Select B or A
now if i drill on col 1 i get
A, C , B
Can i some how put a column selector on top of it to slice n dice the report..
I.e. now i get
1st col -> Select A or B Or C
2nd col -> Select B or A or C
3rd col -> Select C or A or B
Thanks,
Dev

No i want it on the report level & dont want to change the navigation path...
For ex: i have a column whihc has a column selector. I click on the data in it & I get the next level on the report.
Year
Year --> Quarter
now I want a column selector for the next level too. Can we manage doing this on drill down.?
Thanks,
Dev

MS Excel in the Bex Analyzer is not working

HI
If I start Bex Analyzer (BI7.0) , MS Excel is not working.
So There is no userid pop screen on the MS Excel Screen.
Whats' wrong ?

Hi,
Which version of excel are you using?
Try with the SAP GUI 7.10 with the latest SAP BI Addon Component. You can download it from SAP Service Market place.
Downloads - Support Packages and Patches - Entry by Application Group - SAP Frontend Components - BI ADDON FOR SAP GUI - BI 7.0 ADDON FOR SAP GUI 7.10 .
The latest patch level for SAP BI Addon Component is 1300 (bi710sp13_1300-10004472.exe).
Hope this helps.
Regards,
Hari.

Bex Analyzer doesn't work

Dear All,
When I try to run the BeX Analyzer, either from Start->Business Explorer->Analyzer or from RRMX transaction,
I can't open any queries/workbooks and I see all the icon in German.
The other components (Query Designer, Report Desinger) and the BeX 3.x as well, instead, work properly.
I have the following environment:
Windows XP with SP2
Office 2007 Pro
Sap GUI 7.10 Level Patch 14
Any suggestions?
Thanks in advance
Alessandro

you can find more info with the following links...a lot of information on the add ins is available on sdn and oss
BEX Analyser fails with Excel 2007 Professional Plus
Problem in opening query in excel 2007
Bex Add on Excel 2003

Viewer/Designer don't works (RDC, ActiveX, Crystal Report XIR2, C++)

Post Author: [email protected]
CA Forum: Other
Hi, I have integrated in our soft, the Crystal report RDC,ActiveX viewer and ActiveX designer. On my computer all works fine. But on one of my test computer, the viewer and the Designer don't works fine. The activeX are not displayed (I have a blank windows).
I have installed Crystal reports XI release 2 developer on my test computers, but some computers work fine and other don't work. I have the same result with the deployment of the free RDC.
I have try to display the activeX viewer with TSTCON32.exe (activeX test container), the viewer is displayed correctly. After many tests on one of my computer test , the viewer and designer got to work but I have change nothing on the computer. On this computer the bug doesn't appear again. but on other I have still the issue.
It seems there is a bad installation or initialization of the activeX at the first call.
Any idea ?
Thanks in advance
Fred

Hi Pat,
For English thread there is another forum as below for your question.
https://www.sdn.sap.com/irj/scn/forums
Just click "Business Objects SDK Application Development" and then click ".NET Development - Crystal Reports"
It should be more profesional for SDK questions.
Hope it helps.
Regards,
Sunny

Reorder key columns in "Use for Drill down" option

I have Product Detail as the leaf hierarchy level which has Product Id and Product Name are both selected as Logical Key.
When I drill down to this level in Answers, I see both Product Id and Product Name as expected. However I see Product Name as first column followed by Product Key.
Is there a way to change this default behaviour and make Product Key column as first column followed by Product Name?

Hi Prassu,
I had done that and it did not help. I marked the ProductKey&Name column as Primary Key in both the Logical table as well as Dimension Hierarchy level.
I can drill down from Product Category to Product Type. But Product type does not come up as Hyperlink to be able to drill down to ProductKey&Name.
If I make the Product_Id as the primary key then drill down works fine. But with the derived logical column "ProductKey&Name" it does not work.
Any ideas?

How does OBI decide what column to display when drilling down on hierarchy

Hi All,
Lets say I have a logical table called Custom_Account which has Level 1 through 10, where 1 being the total level and 10 being the detail level. I have created a level based hierarchy.
On the total level, lets say I have 2 columns called Hier1_code and Hier1_name, and in the next level, I actually have four columns, Hier2_code, hier2_name, hier2_desc, hier2_details.
Now what configuration settings do I need to make in order for OBIEE to display all the fouce columns from level 2 when a user clicks on a column from level1?
Meaning, how do I define the columns that would be displayed upon drilling down from a parent level to child level.
Can someone please give some clear explanation, as I am confused here.
Thank you,
Peter.

Hi Peter,
After you have defined a hierarchy, you could open the properties of any level in the hierarchy and set the 'Use for Display checkbox' in the "Keys" tab for all the columns you would like to be displayed at this level.
Hope this helps.
Thank you,
Dhar

Hide column until you select drill down to see details.

I am relatively new to SSRS, so please excuse my ignorance. I am using Visual Studio 2012 and the Business Intelligence templates to build a report.
I currently have a report thats grouped on Doctor and in my tablix I have various columns selected. In my tablix, I have a field called Ticket Number and I really
would not like to see this column at all until I hit the "+" (plus) sign on the providers name to drill into the details. The top display they see when they first run the report is the summary and when they hit the plus, thats when i would like
to see the ticket number displayed. Is that possible and if so, how?
Thanks!

Hi Jeffs1977,
According to your description, you want to add drill down action to the report, when you preview the report, column of Ticket Number is hidden, after you click plus sign on provider, the column will be displayed. If that is the case, please refer to the
following steps:
Right-click column of Ticket Number, click Column Visibility.
Select Hide in the When the report is initially run section.
In Display can be toggled by this report item drop-down list, select the textbox name which “Provider” is located.
The following screenshots are for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Button in BEX analyzer does not work

Hello Gurus,
I can open analyzer, but all the button for analyzer (such as open) do not work. will you please what 's wrong with it?
Many thanks,
Frank Zhang

Hi
Try this sapnote_0001121263
Edited by: Thorsten Kuhn on Dec 12, 2008 2:09 PM

Dynamic Capabilities don�t work for Editing & Running Report

Hi,
We are using �User AdminRole� to dynamically assign users the �Report Admin� capabilities. The capabilities are assigned to the session as expected. But when the user tries to edit and run a report, the system returns �View Access denied to user on process [our report name]� error.
Our investigation shows that IDM checks the authorization of the USER rather than his/her current SESSION when updating and running the report (createView and checkinView of the report TaskInstance). We are not able to pass argument �authorized = true� to the createView and checkinView actions since editing and running report (Report TaskDefinition and TaskTemplate) is not defined in a Workflow context. The actions are handled by out-of-box class: com.waveset.ui.web.reports.ReportTaskTemplateForm.
The temporary fix we could think of is to get a �Configurator� Session and assign its LighthouseContext to the end-user session in edittemplate.jsp. It is definitely not an ideal fix for performance and security considerations.
We are wondering if anyone has run into the problem before and have better workarounds. Also, we want to validate that it�s a potential IDM bug so we will open a support ticket on this.
Many Thanks!

I have specified appropriate authType (UserAdminTask, is there anything else) already, and issue remains irrespective of it. The issue is unrelated to what most people face with EndUserTask etc. My WF is supposed to be run by admin. If the admin is assigned capabilities statically (i.e. directly to the user) everything works fine but if they are assigned via a AdminRole which in turn is assigned by a Rule (executed at login) then it breaks.....
I have a strong feeling that this is a bug. Can someone ratify that. I would be happiest if proven wrong :-)

How to have spreadsheet like columns in report (like an Excel grid)

I am trying to make a report in landscape format with around 15 columns across the sheet. The data is sales numbers per months plus total, budget and deviation (calculated).The data should be in an Excel-like grid. The individual cell would obviously be fairly small so it fits across one page.I have been playing with this for some time. Aligning so many objects seems to be a lot of work. The tools in CR are not very proficient for such type of layout.You are lost if you want to insert a column. I did not find a way to move all fields across all sections to the right to make room. It gets all screwed up.The grid, I tried it with borders around the fields and with horizontal / vertical lines to create the grid. Any good tip for a better way of doing that? Thanks in advance!Stefan Koellmann

Is the cross-tab an option for your scenario? If you specifically want a grid like structure, this may be an easier route to explore.Alternatively I'd suggest snapping your objects to guidelines (the little inverted triangles on the ruler bar) to help move things around. Or when you select multiple objects, right click and utilize the 'align' and 'size' options to speed up some of the tasks.

Populate column in reports like populates item in post query

hi all
i have a report that contains the occupation_id and factor_id and i would like to show occupation_description and factor description instead but i don't know how to do it ... i thought of placeholder column but i don't know how to procceed .. any explaination will be appreciated

thank you very much ... you are right, but you know what i got used to Froms Forum and i have book marked because i always access it ... sure i post my question there ... by the way i have created another query but how to join them, it is been so long i didn't use the report builder, what i remember is draging and droping the factor_id from second to the first query but it doesn't work ...

IP - Issues with Input Query: Works on Bex analyzer but not on Web

I am doing the following:
Created a Aggregation level for a multi provider which has only real time infoproviders associated with it
Created the query using Bex Query Designer availing all the options for planning
When I execute this query it executes using a web template and does not open up the Key Figure cells for input, I had tried using the Web Application designer with Save button but still the same issue
I tried the same on Bex analyzer and it works fine
Please help to resolve the above issue.
Thanks in advance.

Hi Ram,
Cells should be input enabled on the web just running the query. No need to create a Webtemplate, altough you need to have the webtemplate to be able to use the "save data" function.
Maybe your query is not input ready at all, and you're misinterpreting analyzer layout.
To test this, please enter some plan data in analyzer, right click and choose "save".
Please check if data is written to the real time infoprovider.
Hope this helps you.
Regards,
Miguel P.

The BEx Analyzer cannot generate VBA code due to the security settings

Hello experts,
when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
Diagnosis
The BEx Analyzer cannot generate VBA code due to the security settings.
System Response
VBA code is not generated.
Procedure
Choose Tools -> Macro -> Security.
On the Trusted Publishers tab page, select Trust access to Visual Basic project.
Choose OK.
Close the BEx Analyzer and continue working as before.
Access to Visual Basic project is only needed when generating VBA code.
This only takes place in design mode or when 3.x workbooks are upgraded.
Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
I use SAP NetWeaver 7.0 together with MS Excel 2007
Thanks
Axel

Hello experts,
I am an additional person interested in the way this issue was solved.
I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
Regards
Guillaume P.
EDIT :
Solution found : I applied the bi710sp10p_1001-10004472.exe patch
(downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM

BEx analyzer don't work move columns in report (like drill down)

Similar Messages

Maybe you are looking for