BEx Analyzer error -2147417848 (80010108)

Good morning,
We are upgrading our GUI from 6.40 to 7.10, and with that, Analyzer 3.5 is reinstalled.  When we try to open Query designer 3.5 or Analyzer 3.5, we get Run-time error -2147417848 (80010108), method logon of object _CSAPLogonConnection failed.  We are unable to go any further.  And advise would be greatly appreciated.

Hi Hari,
Thks for the answer, that resolved the issue.
I just have a question, Im in the process to test Office 2010 and when I try to run BEx, Excel raise the following error.
*"Excel was able to open the file by repairing or removing the unreadable content."*
*"This workbook has lost its VBA project, ActiveX controls and any other programmability-related features."*
Do you know if we will be able to run BEx in office 2010? Does anyone knows if microsoft is taking care about make their office versions compatible with SAP?

Similar Messages

  • Bex Analyzer error -2147417848

    Hi ,
    I am getting following error 
    Run-time error '-2147417848 (80010108)':
    Automation error
    The object invoked has disconnected from its clients..
    Value help window crashes with error -2147417848 (80010108) .
    This happens, when selecting a value by moving to the right handside of value help selection window in Query Designer or Analyzer.
    Sometimes, this is followed by an runtime error '440'.
    When I serached the forum I found that i need to look Note 1039191 - "Value help window crashes with run-time error -2147417848.
    Please tell me how do I look at the oss note.
    Thanks.

    Run-time error '-2147417848 (80010108)':
    Automation error
    The object invoked has disconnected form it's clients.
    Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says:
    > u201C"Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients".u201D
    BEx Query Designer crashes afterwards.
    Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
    620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
    640: Version >= 6400.3.79.4740 (640x.x.x.4740).
    710: check the newest patch of SAP GUI on SAP FTP server.
    Thanks,
    Arun Bala G

  • Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

    I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
    Run-Time error '-2147417848 (80010108)
    Automation error
    The object invoked has disconnected from its clients.
    CR exits after this error message.
    I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
    Anyone ever had this?
    Thank you,
    R.

    Is this still an issue?

  • Run-time error -2147417848 (80010108), method '~' of object '~' failed

    Hello
    I have an application written in VB6 which uses Crystal 9 Reports (RDC). The application is running on Windows XP, SP2.
    On this PC is .net Framework 2.0 installed and since then from time to time I get the message:
    run-time error -2147417848 (80010108), method '' of object '' failed
    But this error doesn't appear always, but when it happens, it happens always at setting the datasource
    example:
    repReport.Database.SetDataSource rsDummy
    Does anybody know why this is?
    Thank you for your help.

    Hi, Urs;
    Whereever the error is occuring, you should ensure you have the latest version of our files. For a client install, be sure that you are using the latest Merge Modules from our web site to deploy your application.
    If you are not getting the error on your development system, you may have newer files there than on the client.
    Regards,
    Jonathan

  • - Runtime error '-2147417848 (80010108)': ??????

    Hi ,
      I am encountering problem when I am trying to restrict Characteristics, the error description is
    "- Runtime error '-2147417848 (80010108)' " and getting disconnected immediately from BW Server 
    This is not working even after applying both SAP notes 857360 and 684106. Do u think still I need to do apply any notes.... Please help me out.
    Points will be warded
    Regards,
    Andy

    Hi
    Apply this note and it will fix your issue.
    Note:1039191
    Regards
    Please, asign point if useful.
    Regards

  • When access BW from Crystal I get: run-time error '-2147417848(80010108)'

    Installed Crystal and the SAP int Kit in the correct order. I can access R/3 but get an error when trying to access BW:
    run-time error '-2147417848(80010108)'
    Then Crystal crashes and shuts down.

    Yep, I have the same... The only one solution for me for now is open report, then log in to BW using toolbar icon from SAP integration kit bar. Only after that you can work with this report without crash.

  • BEx Analyzer Error "NO APPLICATION DATA FOUND".

    Hello Experts,
    I have a problem, when i am going to create a query in BEx analyzer.
    I got this Error "NO APPLICATION DATA FOUND".
    I already check that Particular InfoCube, The Cube is fine and also it contains Data.
    But the Problem begins Same.
    Thankyou,
    Kshitij Deshmukh

    Hello,
    I have solved this problem on my own.
    Solution: 1st check your target over query is excuting...there is data or no... in Tcode  "LISTCUBE".
    Then data is available... or not.
    If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
    check ur data is ready for reproting.... i means reporting icon is available or not.????
    If the Problem begin Same "NO APPLICABLE DATA FOUND".
    Then the Problem in Loading.
    2. Click on cube choose manage tab...there will be reproting symbol....
    Need to check each steps if data is there or Report not running....
    Finally delete the request then again load the data..and icon should come automatically...
    3. There is R and below one excel sheet fighre...icon
    4. Go and make a Report in BEx Analayzer..
    Data will fetching Automatically....
    Thank you
    Regards
    Kshitij Deshmukh

  • BEx Analyzer error

    When trying to open the BEx analyzer, I get the following error: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed.
    I can access the Bex analyzer using the RRMX transaction.
    Waiting for your answer
    Thank you
    Ramona Leabu

    Hi,
    your excel server connection is broken.Try to login once again with RRMX or else  from start menu.
    Regards,
    Nikitha

  • BEx Analyzer error in loading DLL

    Hello I have problem with BEx Analyzer. Each time I try to open it, there is an error message: 
    Microsoft Visual Basic
    Error in loading DLL .
    Last weak it was working! Do I need instal latest patch or what happend?
    Thanks for reply.
    Edited by: Marcel Horkovy on Mar 29, 2008 4:17 PM

    Problem solved. I instaled MS Visio (MS Office) but last weak I uninstaled it. BEx Analyzer wasn´t working. So I tried to instal MS Visio again. And here we are. BEx Analyzer is working. I uninstaled Visio again and BEx Analyzer is still working.
    Edited by: Marcel Horkovy on Mar 29, 2008 5:38 PM

  • Bex analyzer error message

    Dear gurus,
    I have created a user exit variable, and created on customer exit EXIT_SAPLRRS0_001 what i need.
    My problem is that when a value is not found, on the exit i send a message to screen:
    MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' with sy-uname RAISING dummy_exception.
    If i test query on transaction rsrt, the message is sent to screen, but when i try to do it on bex analyzer message is not sent.
    Could someone help me on this?
    Thanks in advance,
    Vitor Ramalho

    Frank,
    Here goes the code.
      WHEN 'Z_TIPO_MOEDA'.
    Adicionado a 27.08.2009 por VCAVACO
    Validação do Tipo de Moeda de acordo com Centros de Custo
        CLEAR: range, range_n, ind, ind_n, n_preench, preench, sucesso.
        IF i_step = 2.
    Seleccionar o campo pretendido
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'Z_REST2_CC'.
            IF loc_var_range-opt EQ 'BT'.
         Quando é um range de valores o só entra no loop 1 vez
              SELECT  * FROM zgtap_og_cc_mt INTO TABLE lt_zgtap_og_cc_mt_aux
                 WHERE ( ( centro_de  >= loc_var_range-low AND centro_de  <= loc_var_range-high )
                    OR   ( centro_ate >= loc_var_range-low AND centro_ate <= loc_var_range-high )
                    OR   ( centro_de  <= loc_var_range-low AND centro_ate >= loc_var_range-high ) ) .
              IF sy-subrc EQ 0.
                LOOP AT lt_zgtap_og_cc_mt_aux.
                  MOVE lt_zgtap_og_cc_mt_aux TO lt_zgtap_og_cc_mt.
                  APPEND lt_zgtap_og_cc_mt.
                ENDLOOP.
               Se é encontrado algum registo na tabela que contenha algum dos centros do range,
               guarda os extremos do range e marca com sucesso a consulta
                lt_range-centro_de  = loc_var_range-low.
                lt_range-centro_ate = loc_var_range-high.
                APPEND lt_range.
                range = 'X'.
              ELSE.
               Caso não encontre nenhum registo, preenche o campo range_n que dita o não sucesso da consulta
                range_n = 'X'.
              ENDIF.
            ELSEIF loc_var_range-opt EQ 'EQ'.
         Quando são valores individuais faz o select para cada registo, ou seja,
         percorre o loop várias vezes
              SELECT * FROM zgtap_og_cc_mt
                 INTO TABLE lt_zgtap_og_cc_mt
                      WHERE ( centro_de  <= loc_var_range-low
                        AND   centro_ate >= loc_var_range-low ).
              IF sy-subrc EQ 0.
               Marca como sucesso a consulta do registo
                ind = 'X'.
              ELSE.
               Marca como não sucesso a consulta do registo
                ind_n = 'X'.
              ENDIF.
            ELSEIF loc_var_range-opt EQ 'CP' AND loc_var_range-low = '*'.
              SELECT * FROM zgtap_og_cc_mt
               INTO TABLE lt_zgtap_og_cc_mt.
              IF sy-subrc = 0.
                n_preench = 'X'.
              ELSE.
                preench = 'X'.
              ENDIF.
            ENDIF.
          ENDLOOP.
         Quando nenhum dos centros estiver na tabela o tipo de moeda deve ser 20
          IF ( range_n EQ 'X' AND range = ' ' ) OR ( ind EQ ' ' AND ind_n EQ 'X' ) OR preench = 'X'.
            CLEAR l_s_range.
            l_s_range-low  = '20'.
            l_s_range-high = '20'.
            l_s_range-sign = 'I'.
            l_s_range-opt  = 'EQ'.
            APPEND l_s_range TO e_t_range.
         Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
          ELSEIF ind EQ 'X' AND ind_n EQ ' '.
            CLEAR l_s_range.
            l_s_range-low  = '00'.
            l_s_range-high = '00'.
            l_s_range-sign = 'I'.
            l_s_range-opt  = 'EQ'.
            APPEND l_s_range TO e_t_range.
         Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
          ELSEIF ( ind EQ 'X' AND ind_n EQ 'X') OR n_preench = 'X'
              OR ( range = 'X' AND range_n = 'X' ).
           MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER 023 INTO l_dummy.
           g_message->add_msg( ).
           MESSAGE i023(zmiicf).
            MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
          ELSEIF range = 'X' AND range_n = ' '.
          Quando um dos centros do range existir na tabela, deve verificar se todos os centros do range
          são contemplados na tabela
            LOOP AT lt_range.
              LOOP AT lt_zgtap_og_cc_mt WHERE centro_de  <= lt_range-centro_de
                                          AND centro_ate >= lt_range-centro_ate.
              ENDLOOP.
              IF sy-subrc NE 0.
         Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
                MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
               MESSAGE i023(zmiicf).
              ELSE.
                sucesso = 'X'.
              ENDIF.
            ENDLOOP.
            IF sucesso = 'X'.
         Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
              CLEAR l_s_range.
              l_s_range-low  = '00'.
              l_s_range-high = '00'.
              l_s_range-sign = 'I'.
              l_s_range-opt  = 'EQ'.
              APPEND l_s_range TO e_t_range.
            ENDIF.
         ENDIF.
          ENDIF.
        ENDIF.
    Many thanks,
    Vitor Ramalho

  • Bex Analyzer error in Excel 2007

    Hi all,
    i am in excel 2007 and when i open a query in analyzer then i got a ciritical pop up,,sayin program needs to be terminated. do anyone have any solution?

    Hi,
    you can ask your Basis and Network Person to install these patches on your system. SAP patches can be downloaded from service market place / solman (these days). And rest will be available on Internet. You can also visit service.sap.com for more details (you need logon id for this).
    1. goto service.sap.com/bi
    2. expand "Product Information SAP NetWeaver 7.0 - BI"
    3. expand "BI Business Explorer"
    4. click on "MS Operating System & MS Office Compatibilities with BEx"
    there you'll find details about MS Operating System & MS Office Compatibilities with BEx.
    Hope this helps.
    Edited by: Ashish Tewari on Jun 10, 2008 3:12 PM

  • BEX Analyzer: Error when clicking in a filter hierarchy

    Hello,
    I am using the SAP BI7 version and I have a problem in the BEX anayzer. When I click in the filter zone and when I choose a filter caracteristic that contains a hierarchy I have the following error message and i am killed:
    <b>Class RSBOLAP 000:Error in the SAPMSSY1 method: uncaught exception
    Class BRAIN 299 System error int the CL_RSR_NET_RSMD_VHS_SVC program and form GET_HIER_NODE_READER:01.</b>
    Do you have ever had a same error? what can be solution?
    Thanks for your help!
    Regards,
    Julien

    Hellow Julien
    yes, i also encountered the same problem. But that is all the formula varialbles.
    For that some configuration has to be done by the BASIS people.
    Our basis peoples are working onthat.
    Award points, if this helps you.
    Regards
    Saravanan.ar

  • BEx Analyzer Error while generate pdf sap

    In BI 7.0 NW2004s I am getting an error while I am tyring to print and it convert PDF file... Report opend in Excel fine, very strange becuase some time it open in PDF and mostally time not...
    Is anyone please tell me where may found out ADS Adboe Documents Services software, and where may I installed in BI server... ?
    Thanks in Advanced
    Angeline Purnama

    Hi,
    I think you have BI system on which the usage type portal is also installed. Just go through the note 944221.
    Make sure you assign the default printer in SU01 for the users. Some times this works, it generally takes the default printer options from the SU01 settings for printing.
    No need to deploy the BI_BASES and other component, if you have installed usage type portal and BI-java then this components
    will be deployed by default. I think your systems has this things. Because in your above post you are saying you are running as webpage.
    Regards,
    Vamshi.

  • RFC_ERROR_MESSAGE error when i am opening BEx analyzer

    Hi GURUs,
    I am getting the following error when i am opening Query designer/Web application server/Query reporter in BEx Analyzer
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    CMALLC : rc=20 > Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=122.169.253.181, GWSERV=sapgw30, SYSNR=30
    LOCATION    SAP-Gateway on host mgpl0003 / sapgw30
    ERROR       partner
                'ABTS-AP-Static-181.253.169.122.airtelbroadband.in:sapgw30'
                not reached
    TIME        Wed Sep 28 19:37:03 2011
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2835
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       1006
    If anybody knows answer for this one please try to help me

    Hi Ramana,
    I think there is an issue with version of the BEx analyzer.If it is a new one then check any patches for that.Check like this and post this will work.
    Regards,
    Madhu.

  • Remote -Bex analyzer not working

    Hello experts,
    I am getting Bex analyzer error while running Query from Remote.
    RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached"
    Thanks for your help

    Hello
    Here is some analysis,let me know if you face any problems.
    Issue statement <b>ping</b> <IP address> (In this example:192.168.4.2)
    <b>Result</b> - No reply: Boot SAP Gateway host required.
    <b>Solution</b> - Ceck whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
    The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.
    Hope it Helps
    Chetan
    @CP..

Maybe you are looking for