Bex Analyzer error in Excel 2007

Hi all,
i am in excel 2007 and when i open a query in analyzer then i got a ciritical pop up,,sayin program needs to be terminated. do anyone have any solution?

Hi,
you can ask your Basis and Network Person to install these patches on your system. SAP patches can be downloaded from service market place / solman (these days). And rest will be available on Internet. You can also visit service.sap.com for more details (you need logon id for this).
1. goto service.sap.com/bi
2. expand "Product Information SAP NetWeaver 7.0 - BI"
3. expand "BI Business Explorer"
4. click on "MS Operating System & MS Office Compatibilities with BEx"
there you'll find details about MS Operating System & MS Office Compatibilities with BEx.
Hope this helps.
Edited by: Ashish Tewari on Jun 10, 2008 3:12 PM

Similar Messages

Error in Excel 2007.

We have a user who gets an error when he will start the BPC for Excel in Excel 2007. And he can not open the BPC for Excel. The following error message appears: "In order to open the file Ev4Excel.xla the file had to be repaired or it was forced to remove unredable materials. The workbook has lost its VBA projects, ActiveX controls and all other programming functions." And it can not open the BPC for Excel
The user also has Excel 2003 installed on his computer and if he uses Excel 2003, it works.
Is it possible to have both Excel 2003 and Excel 2007 installed on the same computer and run SAP BPC against both
Are there some Excel add-ins that you have to install when you install the Excel 2007?

Hi,
In SAP BPC installation guide you will find below recommendation
Note: In order for the software to function correctly in Excel 2007, you must
install the Microsoft.ACE.OLEDB.12.0 provider, which you can get from the
Microsoft website. The provider must be installed on the Application server.
This provided in 25mb in size. We installed it on our application server. but still some errors with excel 2007 is not resolved. Finally we tried with office 2003, but still error continued. When we moved back to office 2007, some excel-addins which were available earlier went missing.
regards,
Lokesh Nandula

Bex Analyzer Toolbar in Excel

Hi,
I have a customer usind Bex Analyzer (Excel) for reporting.
Does anyone know or maybe someone had to do it already if there is a <b>possbility to "grey out" buttons on the Bex Analyzer Toolbar in Excel (e.g. the "tools" button or the "settings" button)?</b>
I would appreciate any information on that very much.
Thanks for your help
Christian

Hi Christian,
If you want this function to run when a workbook opens, you would put the code in the code window of "ThisWorkbook".
Tools >> Macros >> Visual Basic Editor is a good start.
If the Project Explorer window is not visible, then use View >> Project Explorer (or Ctrl+R) to make it visible.
Locate your workbook in the Project Explorer window. It will be named something like VBAProject(xxxxx) where xxxx = your workbook name. If the workbook was opened from the BW server, the name in parentheses might be something like xSAPtemp1234.xls.
If you see a "+" to the left of the VBAProject name, then click to expand it. You should now see at least two folders under the VBAProject name:
+ Microsoft Excel Objects
+ Modules.
Expand the Excel Objects. Under the Microsoft Excel Objects heading, you will see icons representing each of the worksheets in your workbook, and an icon that is named ThisWorkbook. That is where you would want to put the code if you want it to run every time that the workbook is opened.
Select the ThisWorkbook icon, right-click, select View Code. The code window should open on the right side of your screen.
As an example, to execute the "test3" subroutine when the workbook opens, you would use the code below:
Private Sub Workbook_Open()
Call test3
End Sub
The code for test3 subroutine would be added to either a new (Insert >> Module) or existing Module.
- Pete

BEx Analyzer Error "NO APPLICATION DATA FOUND".

Hello Experts,
I have a problem, when i am going to create a query in BEx analyzer.
I got this Error "NO APPLICATION DATA FOUND".
I already check that Particular InfoCube, The Cube is fine and also it contains Data.
But the Problem begins Same.
Thankyou,
Kshitij Deshmukh

Hello,
I have solved this problem on my own.
Solution: 1st check your target over query is excuting...there is data or no... in Tcode "LISTCUBE".
Then data is available... or not.
If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
check ur data is ready for reproting.... i means reporting icon is available or not.????
If the Problem begin Same "NO APPLICABLE DATA FOUND".
Then the Problem in Loading.
2. Click on cube choose manage tab...there will be reproting symbol....
Need to check each steps if data is there or Report not running....
Finally delete the request then again load the data..and icon should come automatically...
3. There is R and below one excel sheet fighre...icon
4. Go and make a Report in BEx Analayzer..
Data will fetching Automatically....
Thank you
Regards
Kshitij Deshmukh

BEx 7.X + MS Excel 2007 - Max number of Rows

Hi,
I've been looking for some way to show more than 65k rows in Excel 2007 using BEx Analyzer 7.X.
I have a customer that has this issue. I know that use more than 65k rows is not a property of a BI report and reports with more than 65k rows would have problems with performance, but my customer has this issue.
Do you know some way to solve this problem? Can Excel 2007 + BEx Analyzer 7.X show more than 65k rows?
Thanks,
Best Regards,
Marco Muniz

Hi Marco,
as far as I know in Excel 2007 it is possible to show
1,048,576 rows by 16,384 columns
Please check this thread:
WAD 7.0 MENU_ITEM with html Frame

BEx Analyzer error

When trying to open the BEx analyzer, I get the following error: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed.
I can access the Bex analyzer using the RRMX transaction.
Waiting for your answer
Thank you
Ramona Leabu

Hi,
your excel server connection is broken.Try to login once again with RRMX or else from start menu.
Regards,
Nikitha

BEx Analyzer error -2147417848 (80010108)

Good morning,
We are upgrading our GUI from 6.40 to 7.10, and with that, Analyzer 3.5 is reinstalled. When we try to open Query designer 3.5 or Analyzer 3.5, we get Run-time error -2147417848 (80010108), method logon of object _CSAPLogonConnection failed. We are unable to go any further. And advise would be greatly appreciated.

Hi Hari,
Thks for the answer, that resolved the issue.
I just have a question, Im in the process to test Office 2010 and when I try to run BEx, Excel raise the following error.
*"Excel was able to open the file by repairing or removing the unreadable content."*
*"This workbook has lost its VBA project, ActiveX controls and any other programmability-related features."*
Do you know if we will be able to run BEx in office 2010? Does anyone knows if microsoft is taking care about make their office versions compatible with SAP?

BW error with Excel 2007

Hi Expert,
I found some critical issues that in Excel 2007
1,
can not read 20000 records at one time, it will pop upan issue window with the error message "Client out of memory" , but it works well in Excel 2003.
2,
When I tried to open the other report it pop up another error message "The program will now terminate Please refer to the trace for further infomation",but it works well in Excel 2003.
Are there any experts can give some suggestions ?
Len

Hi
please refer teh following notes : 1260213, 1242583, 1052761 1175947.
Regards, Hyma

Report created in SAP/ BEx 7.1 with Excel 2007 can't be opened by 2000/2003

Hi
We're currently in the process of migrating to Office 2007 from both 2000 & 2003 and we're finding in testing that staff who use BEx Analyser with SAP 7.1 to create queries and send embedded in reports to others can not be opened by recipients who are still on Excel 2000 or 2003. Staff who already using Excel 2007 can open the reports however not on earlier versions. We are ensuring the excel file is saved as the file type .xls so there's no reason we can see why it shouldn't open successfully.
Has anyone else experienced this?
Many thanks

Have you tried Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 file formats?
http://office.microsoft.com/en-us/support/microsoft-office-compatibility-pack-for-word-excel-and-powerpoint-2007-file-formats-HA010168676.aspx

Errors opening Excel 2007 spreadsheets in Excel 2010

When I try to open spreadsheets created in Excel 2007 with Excel 2010, I get the error: "Excel found unreadable contenct in 'file name'. Do you want to recover the contents of this workbook? If you trust the source of this workbook, click
Yes". Then a Repairs dialog box comes up saying: "Excel completed file level validation and repair. Some parts of this workbook may have been repaired or discarded.    Removed Part: Print options." File then opens fine.
We receive Excel 2007 from various sources. One of my problem is that we are just starting to migrate people to Windows 7 and Office 2010, with most people still on Office XP. The file format converter for Excel 2002/2003 does not work with these
Excel 2007 files. The other problem is that we have macros that are used to open Excel files and import data into other Excel files. Pretty hard to modify these macros to allow for some files that are going to pop up this error, and others that
do not.
What is causing this problem, and what fix is available? We have asked that people save the Excel files in Excel 97-03 format before sending to us, with mixed results.

Hi,
Thank you for using Excel IT Pro Discussions forum.
Are you using Office 2010 RTM version? If it is trial version or beta version, I suggest upgrading it to the RTM version.
First, please check if this KB article helps:
Error message when you try to open a workbook in Excel 2007: "Excel found unreadable content in Book_Name"
http://support.microsoft.com/kb/929766
Note: The steps are for Excel 2007. The steps in Excel 2010 are similar.
If the problem persists, let’s also check the following settings in Excel 2010.
========
1.
In Excel 2010, click File > Options > Trust Center > File block settings.
2.
Check the checkboxes before:
Excel 2007 and later Wordbooks and Templates
Excel 2007 and later Macro-Enabled Workbooks and Templates
Excel 2007 and later Add-in Files
Excel 2007 and later Binary Workbooks
Then, try to open the Excel 2007 file in Excel 2010 and check the results again.
Best Regards,
Sally Tang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]

BEx Analyzer error in loading DLL

Hello I have problem with BEx Analyzer. Each time I try to open it, there is an error message:
Microsoft Visual Basic
Error in loading DLL .
Last weak it was working! Do I need instal latest patch or what happend?
Thanks for reply.
Edited by: Marcel Horkovy on Mar 29, 2008 4:17 PM

Problem solved. I instaled MS Visio (MS Office) but last weak I uninstaled it. BEx Analyzer wasn´t working. So I tried to instal MS Visio again. And here we are. BEx Analyzer is working. I uninstaled Visio again and BEx Analyzer is still working.
Edited by: Marcel Horkovy on Mar 29, 2008 5:38 PM

Error with Excel 2007

Dear All,
We developed a planning application using BPS. The existing systems had Excel 2003 installed in them. The Excel layouts were designed with heavy Macro coding in the background.
Recently Excel 2007 was installed in our machines. But, unfortunately, the values displaying on the Excel are separated by comma instead of decimals (this is an excel setting,which was also changed, but still the error exists). As a result, the data save on the excel always gives an error due to the comma.
Is there any way, we can overcome this error. Also the macros do not work when the planning folder is executed.
There is no problem when the same layouts are run on Excel 2003.
Any suggestion/recommendations/solution would be appreciated.
Thanks,
Aby

Thanks for your response.
We already checked these settings. But aren't SAP settings relevant for a given user? The same user can execute the BPS Layout perfectly fine in other PCs that have Excel 2003 installed.
We also changed the setting that's available in the Excel, but again of no use.
The same PC has Excel 2003 installed too, and normal numeric entries distinguish between commas and decimals as expected.
These have not yet resolved the issue we face with commas being recognized instead of decimals when we execute the Planning Layout. For this reason, macros are getting affected.
Please keep posting...
Regards,
Aby

Bex analyzer error message

Dear gurus,
I have created a user exit variable, and created on customer exit EXIT_SAPLRRS0_001 what i need.
My problem is that when a value is not found, on the exit i send a message to screen:
MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' with sy-uname RAISING dummy_exception.
If i test query on transaction rsrt, the message is sent to screen, but when i try to do it on bex analyzer message is not sent.
Could someone help me on this?
Thanks in advance,
Vitor Ramalho

Frank,
Here goes the code.
WHEN 'Z_TIPO_MOEDA'.
Adicionado a 27.08.2009 por VCAVACO
Validação do Tipo de Moeda de acordo com Centros de Custo
    CLEAR: range, range_n, ind, ind_n, n_preench, preench, sucesso.
    IF i_step = 2.
Seleccionar o campo pretendido
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'Z_REST2_CC'.
        IF loc_var_range-opt EQ 'BT'.
     Quando é um range de valores o só entra no loop 1 vez
          SELECT * FROM zgtap_og_cc_mt INTO TABLE lt_zgtap_og_cc_mt_aux
             WHERE ( ( centro_de >= loc_var_range-low AND centro_de <= loc_var_range-high )
                OR   ( centro_ate >= loc_var_range-low AND centro_ate <= loc_var_range-high )
                OR   ( centro_de <= loc_var_range-low AND centro_ate >= loc_var_range-high ) ) .
          IF sy-subrc EQ 0.
            LOOP AT lt_zgtap_og_cc_mt_aux.
              MOVE lt_zgtap_og_cc_mt_aux TO lt_zgtap_og_cc_mt.
              APPEND lt_zgtap_og_cc_mt.
            ENDLOOP.
           Se é encontrado algum registo na tabela que contenha algum dos centros do range,
           guarda os extremos do range e marca com sucesso a consulta
            lt_range-centro_de = loc_var_range-low.
            lt_range-centro_ate = loc_var_range-high.
            APPEND lt_range.
            range = 'X'.
          ELSE.
           Caso não encontre nenhum registo, preenche o campo range_n que dita o não sucesso da consulta
            range_n = 'X'.
          ENDIF.
        ELSEIF loc_var_range-opt EQ 'EQ'.
     Quando são valores individuais faz o select para cada registo, ou seja,
     percorre o loop várias vezes
          SELECT * FROM zgtap_og_cc_mt
             INTO TABLE lt_zgtap_og_cc_mt
                  WHERE ( centro_de <= loc_var_range-low
                    AND   centro_ate >= loc_var_range-low ).
          IF sy-subrc EQ 0.
           Marca como sucesso a consulta do registo
            ind = 'X'.
          ELSE.
           Marca como não sucesso a consulta do registo
            ind_n = 'X'.
          ENDIF.
        ELSEIF loc_var_range-opt EQ 'CP' AND loc_var_range-low = '*'.
          SELECT * FROM zgtap_og_cc_mt
           INTO TABLE lt_zgtap_og_cc_mt.
          IF sy-subrc = 0.
            n_preench = 'X'.
          ELSE.
            preench = 'X'.
          ENDIF.
        ENDIF.
      ENDLOOP.
     Quando nenhum dos centros estiver na tabela o tipo de moeda deve ser 20
      IF ( range_n EQ 'X' AND range = ' ' ) OR ( ind EQ ' ' AND ind_n EQ 'X' ) OR preench = 'X'.
        CLEAR l_s_range.
        l_s_range-low = '20'.
        l_s_range-high = '20'.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
     Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
      ELSEIF ind EQ 'X' AND ind_n EQ ' '.
        CLEAR l_s_range.
        l_s_range-low = '00'.
        l_s_range-high = '00'.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
     Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
      ELSEIF ( ind EQ 'X' AND ind_n EQ 'X') OR n_preench = 'X'
          OR ( range = 'X' AND range_n = 'X' ).
       MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER 023 INTO l_dummy.
       g_message->add_msg( ).
       MESSAGE i023(zmiicf).
        MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
      ELSEIF range = 'X' AND range_n = ' '.
      Quando um dos centros do range existir na tabela, deve verificar se todos os centros do range
      são contemplados na tabela
        LOOP AT lt_range.
          LOOP AT lt_zgtap_og_cc_mt WHERE centro_de <= lt_range-centro_de
                                      AND centro_ate >= lt_range-centro_ate.
          ENDLOOP.
          IF sy-subrc NE 0.
     Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
            MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
           MESSAGE i023(zmiicf).
          ELSE.
            sucesso = 'X'.
          ENDIF.
        ENDLOOP.
        IF sucesso = 'X'.
     Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
          CLEAR l_s_range.
          l_s_range-low = '00'.
          l_s_range-high = '00'.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
     ENDIF.
      ENDIF.
    ENDIF.
Many thanks,
Vitor Ramalho

BEx 7.0 - Save EXCEL 2007 workbooks in .XLS - format

Hi there,
I am currently creating some workbooks with BEx 7.0 .
I am using Excel2007, so the workbooks are saved as .XLSM files. However, it should be possible to open them with an Excel 2003 installation as well, so I tried to safe the workbooks as .XLS files.
I tried to proceed according to SAP OSS note 1052761 (changing the default format in which workbooks are saved to Excel 97 - 2003), but this did not work (the note also only aplies to BEX 3.5).
(I tried saving an old workbook under a new name as well as creating a new workbook from scratch. In both cases, .XLSM files where created and EXCEL 2003 users received error messages when trying to open the workbook).
Does anyone have a piece of advice for me?
Thanks in advance.
Tanja

[Hello Tanja,|http://chandranonline.blogspot.com]
See this OSS Note
SAP Note 1061607 BW 70 BEx: FileExtension & Personalization (Development)
SAP Note 1089212 BI Addon (7.10): not able display workbooks with Office 2007
SAP Note 1013140 BI Frontend / BW Add-on - General Information & Limitations
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Bex Analyzer error -2147417848

Hi ,
I am getting following error
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients..
Value help window crashes with error -2147417848 (80010108) .
This happens, when selecting a value by moving to the right handside of value help selection window in Query Designer or Analyzer.
Sometimes, this is followed by an runtime error '440'.
When I serached the forum I found that i need to look Note 1039191 - "Value help window crashes with run-time error -2147417848.
Please tell me how do I look at the oss note.
Thanks.

Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected form it's clients.
Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says:
> u201C"Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients".u201D
BEx Query Designer crashes afterwards.
Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
710: check the newest patch of SAP GUI on SAP FTP server.
Thanks,
Arun Bala G

Bex Analyzer error in Excel 2007

Similar Messages

Maybe you are looking for