BEx Analyzer Error "NO APPLICATION DATA FOUND".

Hello Experts,
I have a problem, when i am going to create a query in BEx analyzer.
I got this Error "NO APPLICATION DATA FOUND".
I already check that Particular InfoCube, The Cube is fine and also it contains Data.
But the Problem begins Same.
Thankyou,
Kshitij Deshmukh

Hello,
I have solved this problem on my own.
Solution: 1st check your target over query is excuting...there is data or no... in Tcode "LISTCUBE".
Then data is available... or not.
If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
check ur data is ready for reproting.... i means reporting icon is available or not.????
If the Problem begin Same "NO APPLICABLE DATA FOUND".
Then the Problem in Loading.
2. Click on cube choose manage tab...there will be reproting symbol....
Need to check each steps if data is there or Report not running....
Finally delete the request then again load the data..and icon should come automatically...
3. There is R and below one excel sheet fighre...icon
4. Go and make a Report in BEx Analayzer..
Data will fetching Automatically....
Thank you
Regards
Kshitij Deshmukh

Similar Messages

When I try to update LR I get an error message Application not found

When I try to update LR I get an error message "Application not found".
When I try Help in LR it can't be found.
What is wrong?

Talked with Adobe support. Told me to go to Cloud app and log out, then log
in again and then update. Worked fine for me. Hope this helps!
Best regards,
Fredrik Moell
Tomatis New Zealand
www.tomatis.co.nz
A division of Your Amazing Health Ltd
54 Fancourt Street, Meadowbank, Auckland 1072
0800-TOMATIS (866 2847)
Personal 021-1721 930

BEx Analyzer :SAPLOGON_ID 'SAP BW7' not found in saplogon.ini

Hello,
The BEx Analyzer can't connect to my BW System , I got the following error:
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'SAP BW7' not found in saplogon.ini
The following is the copy of saplogon.ini:
=================
[Configuration]
SessManNewKey=2
[EntryKey]
Item1=
[Router]
Item1=
[Router2]
Item1=
[RouterChoice]
Item1=0
[Server]
Item1=xxx.xxx.xxx.com
[Database]
Item1=01
[System]
Item1=3
[Description]
Item1=SAPBW7IDES
[Address]
Item1=
[MSSysName]
Item1=BW7
[MSSrvName]
Item1=
[MSSrvPort]
Item1=
[SessManKey]
Item1=-1
[SncName]
Item1=
[SncChoice]
Item1=-1
[Codepage]
Item1=1100
[CodepageIndex]
Item1=5
[Origin]
Item1=USEREDIT
[LowSpeedConnection]
Item1=0
[Utf8Off]
Item1=0
[EncodingID]
Item1=DEFAULT_NON_UC
[ShortcutType]
Item1=0
[ShortcutString]
Item1=
[ShortcutTo]
Item1=
[ShortcutBy]
Item1=

I had the same issue with SAP Logon 7.30 patch 11, have looked in everything: internet, SAP Notes (1709502 for version 7.30), reinstall SAP from scracth, applied all patches available (11 so far) and nothing.
In the end I just removed the 'incorrect' entry and create again from scratch and voila, no more error.

Test_fwktutorial error. Application not found

I have been worked on this for a whole day.
I installed Jdeveloper for RUP6 and went through all the set up ( Task 1-6 ). However, I got pop up error -- Application not found when I tried test_fwktutorial.jsp.
I have verified the database connection is valid. The user name and password id valid.
Application -> AK
Responsibility -> FWK_TBX_TUTORIAL
Embedded OC4J -> Host Name -> Default Local IP Address.
What elso Do I need to check for this error?
[Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
C:\JDEV\jdevbin\jdk\bin\javaw.exe -client -classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar;C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false; -Duser.language=en -Duser.region=US -Duser.country=US -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=5000 com.evermind.server.OC4JServer -config C:\JDEV\jdevhome\jdev\system9.0.3.5.1453\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 1594 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
Access is denied.

The problem is due to the default web browser not set. I found out the solution on the web. After reset the default web browser, I was able to run the 'Hello World' Page.
Thank you for the response.
To resolve the problem, use the Default Programs feature in Windows Vista to reset the default Web browser preference.
Reset the default web browser
Step 1
1. Click Start, Default Programs
2. Click Set your default programs
3. Select your web browser from the list
4. Click Set this program as default
5. Click OK.
Then follow these steps:
Step 2
1. Click Set program access and computer defaults
2. Click Continue if you see the User Account Control prompt.
3. Click Custom
4. Select your web browser from the list
5. Click OK.

AA - Error Message: No data found in table j_1aat089 for depreciation area

Hi friends,
I am trying to execute ABAW transaction but I recieved the below error:
"No data found in table j_1aat089 for depreciation area 00."
Message no. 8Z874
But Area 00 there is not configurate in my system.
Does anyone has any hint regarding this issue?
Thanks
Daniel Dorta

Hi Daniel,
You are not using Inflation funcitonality, are not you? Check that in IMG - Financial Accounting (New) - Financial Accounting Global Settings (New) - Inflation Accounting - Inflation Methods - Assign Inflation Methods to Company Codes your company code is not assigned to any inflation methods.
Regards,
Eli

BEx Analyzer error

When trying to open the BEx analyzer, I get the following error: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed.
I can access the Bex analyzer using the RRMX transaction.
Waiting for your answer
Thank you
Ramona Leabu

Hi,
your excel server connection is broken.Try to login once again with RRMX or else from start menu.
Regards,
Nikitha

Error: No Logon Data found for Lotus Notes System

Hi,
I have created a lotus notes sytem and have configured the transport also.
But even then i am not able to create appointment under collaboration.
I get the error msg :
"No logon data found for the system 'system name' ".
And when i tried to change the User Mapping , it gives the error msg,
" Error in accessing user mapping data for selected system"
Pls help. Thanks in advance.

Hi all,
Here are a few solutions which may help you solve your problem
1) Access the lotus system with its fully qualified hostname in the system credentials and in the Lotus transport as well.(Ping from portal side and Domino side to each other to check the connectivity as well as the heartbeat check i.e.Launch http://<hostname>:<port>/<servletDirectory>/CalendarServlet in the browser to check the connectivity)
2) In the servlets.properties file,add the following(marked in bold)
servlet.CalendarServlet.initArgs=saveperiod=50,width=7,AttachmentFolder= D:
temp,useEmail=true,debug=true,logResponse=true
This will help you find on the Lotus console what the possible error could be.
3) Run the command 'load http' (coz the http protocol might not have been loaded) on the lotus console and restart the lous server.
If this is the case then make the following entry in the notes.ini file.
Against the list of ServerTasks add HTTP
Regards,
Prathamesh

Bex analyzer error message

Dear gurus,
I have created a user exit variable, and created on customer exit EXIT_SAPLRRS0_001 what i need.
My problem is that when a value is not found, on the exit i send a message to screen:
MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' with sy-uname RAISING dummy_exception.
If i test query on transaction rsrt, the message is sent to screen, but when i try to do it on bex analyzer message is not sent.
Could someone help me on this?
Thanks in advance,
Vitor Ramalho

Frank,
Here goes the code.
WHEN 'Z_TIPO_MOEDA'.
Adicionado a 27.08.2009 por VCAVACO
Validação do Tipo de Moeda de acordo com Centros de Custo
 CLEAR: range, range_n, ind, ind_n, n_preench, preench, sucesso.
 IF i_step = 2.
Seleccionar o campo pretendido
 LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'Z_REST2_CC'.
 IF loc_var_range-opt EQ 'BT'.
 Quando é um range de valores o só entra no loop 1 vez
 SELECT * FROM zgtap_og_cc_mt INTO TABLE lt_zgtap_og_cc_mt_aux
 WHERE ( ( centro_de >= loc_var_range-low AND centro_de <= loc_var_range-high )
 OR ( centro_ate >= loc_var_range-low AND centro_ate <= loc_var_range-high )
 OR ( centro_de <= loc_var_range-low AND centro_ate >= loc_var_range-high ) ) .
 IF sy-subrc EQ 0.
 LOOP AT lt_zgtap_og_cc_mt_aux.
 MOVE lt_zgtap_og_cc_mt_aux TO lt_zgtap_og_cc_mt.
 APPEND lt_zgtap_og_cc_mt.
 ENDLOOP.
 Se é encontrado algum registo na tabela que contenha algum dos centros do range,
 guarda os extremos do range e marca com sucesso a consulta
 lt_range-centro_de = loc_var_range-low.
 lt_range-centro_ate = loc_var_range-high.
 APPEND lt_range.
 range = 'X'.
 ELSE.
 Caso não encontre nenhum registo, preenche o campo range_n que dita o não sucesso da consulta
 range_n = 'X'.
 ENDIF.
 ELSEIF loc_var_range-opt EQ 'EQ'.
 Quando são valores individuais faz o select para cada registo, ou seja,
 percorre o loop várias vezes
 SELECT * FROM zgtap_og_cc_mt
 INTO TABLE lt_zgtap_og_cc_mt
 WHERE ( centro_de <= loc_var_range-low
 AND centro_ate >= loc_var_range-low ).
 IF sy-subrc EQ 0.
 Marca como sucesso a consulta do registo
 ind = 'X'.
 ELSE.
 Marca como não sucesso a consulta do registo
 ind_n = 'X'.
 ENDIF.
 ELSEIF loc_var_range-opt EQ 'CP' AND loc_var_range-low = '*'.
 SELECT * FROM zgtap_og_cc_mt
 INTO TABLE lt_zgtap_og_cc_mt.
 IF sy-subrc = 0.
 n_preench = 'X'.
 ELSE.
 preench = 'X'.
 ENDIF.
 ENDIF.
 ENDLOOP.
 Quando nenhum dos centros estiver na tabela o tipo de moeda deve ser 20
 IF ( range_n EQ 'X' AND range = ' ' ) OR ( ind EQ ' ' AND ind_n EQ 'X' ) OR preench = 'X'.
 CLEAR l_s_range.
 l_s_range-low = '20'.
 l_s_range-high = '20'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
 Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
 ELSEIF ind EQ 'X' AND ind_n EQ ' '.
 CLEAR l_s_range.
 l_s_range-low = '00'.
 l_s_range-high = '00'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
 Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
 ELSEIF ( ind EQ 'X' AND ind_n EQ 'X') OR n_preench = 'X'
 OR ( range = 'X' AND range_n = 'X' ).
 MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER 023 INTO l_dummy.
 g_message->add_msg( ).
 MESSAGE i023(zmiicf).
 MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
 ELSEIF range = 'X' AND range_n = ' '.
 Quando um dos centros do range existir na tabela, deve verificar se todos os centros do range
 são contemplados na tabela
 LOOP AT lt_range.
 LOOP AT lt_zgtap_og_cc_mt WHERE centro_de <= lt_range-centro_de
 AND centro_ate >= lt_range-centro_ate.
 ENDLOOP.
 IF sy-subrc NE 0.
 Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
 MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
 MESSAGE i023(zmiicf).
 ELSE.
 sucesso = 'X'.
 ENDIF.
 ENDLOOP.
 IF sucesso = 'X'.
 Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
 CLEAR l_s_range.
 l_s_range-low = '00'.
 l_s_range-high = '00'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
Many thanks,
Vitor Ramalho

BEx Analyzer error in loading DLL

Hello I have problem with BEx Analyzer. Each time I try to open it, there is an error message:
Microsoft Visual Basic
Error in loading DLL .
Last weak it was working! Do I need instal latest patch or what happend?
Thanks for reply.
Edited by: Marcel Horkovy on Mar 29, 2008 4:17 PM

Problem solved. I instaled MS Visio (MS Office) but last weak I uninstaled it. BEx Analyzer wasn´t working. So I tried to instal MS Visio again. And here we are. BEx Analyzer is working. I uninstaled Visio again and BEx Analyzer is still working.
Edited by: Marcel Horkovy on Mar 29, 2008 5:38 PM

Getting a error ...data found in the main document but not in data source

Good morning .....
I am generating letters , calling wordpad from forms 6i......when it calls the wordpad document . it is saying that ...data found in the maindocument but not in the data source ...
but when i see manually in that wordpad data source is present .
please let me know .. if anyone know solution for this ......

thanks for the reply Grant....
yes it worked in simple case .. now i am trying to retrive a mutiple records in a single header .... so i used loops in the program ... i am getting this error now .
i am calling lst files ...
by using ole2

Bex Analyzer not showing unicode data correctly

Hi all,
we are currently testing unicode data with BW.
when desplaying the data in BEx Analyzer 3.5 there is some data that sows as #. not all.
The connection from BW tosource is unicode and the other side around.
The data is stored as unicode in BW - checking the infoobject masterdata, data displays correctly.
RSRT displays the data correctly - all unicode characters display correctly.
we also made a analyzer 7.0 query which also displays the data correctly.
BEx web also returns the 3.5 query correctly.
Does anyone encountered this in the past or knows why this is happening? the problem is clearly only with bex analyzer 3.5
i am using gui 7.20 with SAP BW 3.5 AddOn Patch 5 for GUI 7.20 patch.

Jason-
We had exactly the same issue. The problem is not in the SAP system, it's in the MS Excel language system. Microsoft does not like to be set up for more than one language. Most users set up their computer for one language. So set up your test computer for... for example, Chinese. Allow English. Log in to Bex in Chinese, and execute your report. You should see Chinese characters, and you may also see English characters as well.
Please note also that if the characteristic text is not maintained in more than one language, you will see the key value instead of the text value. this can become an annoying issue.. for example, we had to write an exit in the datasource so that the customer name (in the communication language) was returned in every single installed langauge to the master data text.
Good luck !

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

Report Error: No Applicaple Data Found

Hi All,
Good Evening
BI 7.0 Report I have simply Drag and drop some Char (rows) and some Key(colum) then Executed but, i am not able to see the report.
It saying No Applicaple Data Found.
What to do, Please provide solutions, please.
Thanks & Regards,
Vijaay.

check whether data is loaded into target on which report is built....If data is there in the target then check the filters and restrictions in the query which is restricting the data to display..
hope it helps

Bex Analyzer error -2147417848

Hi ,
I am getting following error
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients..
Value help window crashes with error -2147417848 (80010108) .
This happens, when selecting a value by moving to the right handside of value help selection window in Query Designer or Analyzer.
Sometimes, this is followed by an runtime error '440'.
When I serached the forum I found that i need to look Note 1039191 - "Value help window crashes with run-time error -2147417848.
Please tell me how do I look at the oss note.
Thanks.

Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected form it's clients.
Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says:
> u201C"Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients".u201D
BEx Query Designer crashes afterwards.
Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
710: check the newest patch of SAP GUI on SAP FTP server.
Thanks,
Arun Bala G

BEx Analyzer error -2147417848 (80010108)

Good morning,
We are upgrading our GUI from 6.40 to 7.10, and with that, Analyzer 3.5 is reinstalled. When we try to open Query designer 3.5 or Analyzer 3.5, we get Run-time error -2147417848 (80010108), method logon of object _CSAPLogonConnection failed. We are unable to go any further. And advise would be greatly appreciated.

Hi Hari,
Thks for the answer, that resolved the issue.
I just have a question, Im in the process to test Office 2010 and when I try to run BEx, Excel raise the following error.
*"Excel was able to open the file by repairing or removing the unreadable content."*
*"This workbook has lost its VBA project, ActiveX controls and any other programmability-related features."*
Do you know if we will be able to run BEx in office 2010? Does anyone knows if microsoft is taking care about make their office versions compatible with SAP?

BEx Analyzer Error "NO APPLICATION DATA FOUND".

Similar Messages

Maybe you are looking for