BEx analyzer not working on GUI 7.10

Hi,
We install BI 7.0 now we want to use BEx analyzer , we installed SAP GUI 7.10 on windows XP
after running BEx analyzer wehn we try to open it's not working and toolbar is in german language.
Is any problem with GUI?
regards,
ajay

We also had the very same German toolbar issue. We are using both Bex 3.5 and BI 7.0 with SAPgui 7.10
We traced the German toolbar issue to the following Microsoft Fix. Make sure that Microsoft fix 907417 is on all PCs you are deploying the new GUI on (can be downloaded from Microsoft Help and Support under http://support.microsoft.com/kb/907417/).
The following are also preqrequisites are for 7.10 but I am guessing you got past this as the bi will not even install if these are not met. Microsoft .Net 2.0 components are required at a minimum with .Net 3.0 also being acceptable. Make sure that all Microsoft Windows Updates for .Net components are also applied.
With regards,
Steven

Similar Messages

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

BEX ANALYZER NOT WORKING

Dear Expert ,
i have installed sapgui 7.10 on windows 7 and also installed patch 16 for sap gui . sap gui working successfuly and connect to the server .when i open the bex analyzer and want to open any query , no system is shown whom i can connect it is blank and when i try to enter the username and password manaually it gives error .
Error Group
RFC_ERROR_PROGRAM
Message
Ent
<deleted by Moderator>
Edited by: Siegfried Szameitat on Jul 6, 2010 3:19 PM

Hi Faisal
Even I faced the same error while using SAPGUI 710 on Win7 with Excel 2007. You can try to get the latest Patches of the BEx 7.0 Addon and BEx 3.5 addon.
In case it still doesn't work, I tried this work around and it worked.
1. Login to the BW System using SAPGUI
2. Run the transaction RRMX and it will start BEx Analyser and you would be connected to the BW System (So no login reqd)
Please note that I didn't have problem with Query designer, only BEx Analyser was giving problem.
Also if you are able to solve the problem, please update the Process you achieved. There is problem in using BEx Analyser with Win7-Excel 2007/2010 for now. Let have a work around at least till the time SAP/MS Fixes this.
Regards
Abhishek

BEX Analyzer not working after SAPGUI730 update

Good day
I really require your expert assistance with the following:
The client has just upgraded to SAPLogon 7.30 file version 7300.3.1084 patch level 8, but they did not consider the application level and MO versions on any of the laptops.
A few laptops are configured with Windows 8, Microsoft Office Professional Plus 2013 and Excel for 32 bit.
Setups were run for "gui730_0-10010496: and "gui730_8-10010496".
Everything works, except for BEx Analyzer that does not want to open at all.
How do I fix this?
Thanks in advance
Cj

Hi,
The support for Microsoft Office 2013 is available only after BI-addon for SAP
GUI 7.30 FEP300.
See 1652769 - 730 GUI DVD - BEx tools - HW\SW requirements
Have you satisfied this criteria?
Regards,
Michael

Bex Query Designer and Bex Analyzer not working

Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad

Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya

BI 7.0 Bex Analyzer not working with excel 2007

Hi All,
I have installed the BEX 7.0 with MS office 2007 but the Analyzer is not working. The open file symbol does not give any option on the click.
Please help.
Regards,
Abhishek

Hi Abhishek,
This is a BEX Add-in problem.
Follow the below step....
1. Copy the Tool
2. Change the Tool.xls into the Tool.xla
3. Copy the Tool.xla file
4. Open My Computer window
5. Navigate to the following folder
a. C:\Program Files\Common Files\SAP Shared\BW
b. Paste Tool.xla file into this folder
6. Open Bex Analyzer
7. Open a Query or Workbook
8. Click on the u201CToolsu201D Menu on the Top
9. Select u201CAdd-Insu201D from the Tools menu
10. Click Browse from the Add-Ins window that opens
11. Browse to the file you just saved
a. C:\Program Files\Common Files\SAP Shared\BW\ Tool.xla
b. Click Ok to continue
12.The Tool for Excel should not be checked in the Add In window
13.Click Ok to continue
14. Close
15. Re Open Bex Analyzer
16. The Tool command should be displayed at the top of the Tool Bar
17. Close Bex Analyzer
18. Open Excel
19. The Tool command should be displayed as well at the top of the Tool Bar.
Hope this helps...
check the below link
http://www.sytecpa.org/software/BWInstructions/Installing%20the%20SAP%20BEx%20Analyzer%20Excel%20Add-In.pdf
Regards
KP

Remote -Bex analyzer not working

Hello experts,
I am getting Bex analyzer error while running Query from Remote.
RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached"
Thanks for your help

Hello
Here is some analysis,let me know if you face any problems.
Issue statement ping <IP address> (In this example:192.168.4.2)
Result - No reply: Boot SAP Gateway host required.
Solution - Ceck whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.
Hope it Helps
Chetan
@CP..

Bex Analyzer not installed

Dear Experts
Iam working on a new installed BI Developement server, when i type RRMX it throws me message : BEx analyzer not installed, install BEx Analyzer

Hello,
You can have GUI, you can have excel, but bex analyzer is an add-in for excel, it is not sap gui and not excel itself.
In windows Start->All Programs->Business Explorer - check if analyzer is there, or check it in the respective windows folder, if is not there just install it using the sap cd or download it from service sap.
Regards,
Jorge Diogo

RRMXP does not work with GUI 7.20

Hi Experts,
I have the following problem. RRMXP does not work with GUI 7.20, BEX 7.0 launches and I have to enter proper user and password. (I get SAP Logon screen with listed systems)
It works properly with GUI 7.10 and I have not to log into BEX.
Did anyone encounter such problem? Does anyone know what causes the problem?
Regards&thanks
Marek

Hi,
RRMXP uses OLE to launch Microsoft Excel together with the SAP BEx add-in. Then it use a macro within BEx to open the workbook. check whether BEx is not installed properly (run SAPBEXC.XLA under C:Program FilesSAPFrontendBW) or the Excel macro security settings prevent execution of the macros.
Also Check the below link it has some note to follow
RRMX and RRMXP does not open the query and workbook
Regards,
Satya

Working with documents via BEx Analyzer not using the portal

Hello,
i read that we are able to create (work) with documents (comments) via
BEx Analyzer. When i want to add a comment how it is described in the
help we get connected to the portal. We dont want to use the portal for
that. Therefore we searched a way to skip the portal. We read that in
BW Versions before 7.0 the portal was not connected but since 7.0 we
have the portal connectivity, but it should also possible to not use
the portal and to access directly the BI Server. I searched for the
Customizing to do so but i could not find it where to switch to the old
logic.
And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
Can anyone give me a hint?
Kind regards,
Murat

Hi Murat,
We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
Awaiting for your reply.
Thanks,
V.Senthilkumar

BE Analyzer not working with Excel 2007 / Gui 710

Hi
I am working on a machine that has MS Office 2007 installed.
Here I am experiencing problems with BEx Analyzer.
The program starts up fine, I can connect to the BI server, see my excisting queries and workbooks when I press "Open" (created on a PC with Office 2003 installed) but as soon as I try to execute either of them I get an error:
"A Critical program error occured.
The program has to close.
Please refer to the trace for further information."
The same error occurs if I try to insert a query to a new workbook.
Background info:
SAP Gui 710, Patch 1
Support Pack Stack 12
According to the documentation I have found the combination of MS Excel 2007 and Gui 710 should be supported.
Johnny H.
PS I have added the SAP folders to my "trusted locations", and I have also marked the "Trust access to the VBA project object model" in the Excel options.

Hi,
I'm running SAP Gui 710 patch 3 and the BW add on 710 patch 1 on a Vista with Office 2007 and it runs well. I would suggest to download the latest patches on service.sap.com/swdc
Eddy
PS. Reward useful answers and earn points yourself

Bex Analyzer doesnt work

Hellow,
We upgraded our system to netweaver 2004S. On some of the user's workstations, when they try to open the new Bex Analyzer, The Excel doesnu2019t open. When i open the excel from the Excel button I can see the Bex toolbar but it is disabled. We checked note number 1050605 and downloaded windows updates of .NET framework 1.1 but it doesnu2019t work.
Please Advice,
Amir Dror

Follow the installation steps as below.
1.     Uninstall the SAP GUI which is already installed on the machine. (Go to Control Panel u2013 Uninstall SAP GUI ).
2.     Make sure you are on minimum of Windows XP SP2 (Note: 1013201)
3.     Update to IE 6 SP2 with latest hotfixes and patches: See blog for details: Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
4.     Ensure Excel 2003 or Excel 2007 is installed (Note: 1013201)
5.     Install .NET Framework 1.1 (Note: 1013207) :
downloaded from http://www.microsoft.com/downloads/details.aspx?FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3
6.     Install .NET Framework 1.1 SP1 (Note: 1013207) http://www.microsoft.com/downloads/details.aspx?familyid=A8F5654F-088E-40B2-BBDB-A83353618B38
7.     Install .NET Framework 2.0 (Note: 1013139) : http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
8.     Install .NET Framework 3.0 (Note: 1013139) : http://www.microsoft.com/downloads/details.aspx?familyid=10CC340B-F857-4A14-83F5-25634C3BF043&displaylang=en
9.     Install the DHTML Editing Control for Applications Redistributable Package (Windows Vista Only) :
http://www.microsoft.com/downloads/details.aspx?familyid=B769A4B8-48ED-41A1-8095-5A086D1937CB&displaylang=en
10.     Install Microsoft Visual J# .NET 1.1 (Note 964495) :
http://www.microsoft.com/downloads/details.aspx?FamilyId=E3CF70A9-84CA-4FEA-9E7D-7D674D2C7CA1&displaylang=en
11.     Install SAPGUI 7.10 Core
12.     Install SAP BI BEx Analyzer
13.     Run SAP Install for BI 7.0 Addon for SAPGUI 7.10   ( bi710sp05_500-10004472.exe)
14.     Run SAP Install for BW 3.5 Addon for SAPGUI 3.5 ( bw350gui710_3-10004473.exe)
15.     Install SAPGUI 7.10 (patch 7)     (gui710_7-10002995.exe)

BEx Analyzer not run in office 2007

Dear all,
We are using BI version 7.0 in BEX gui (frond end pc) windows vista and office 2007 is used when I go to business explorer and run Analyzer then its call excel but not open any file or sheet, then in excel I go to excel Add-ins menu -
BEx Analyzer -
open Query then saplogon menu appear I choose BI give my user name password then I choose infoarea---XXXXX-----XXXXX   that mean I open info area then
The error occur.
" A critical program error has occurred. The program will now terminated, Please refer to the trace for further information"
Trace information
Tracefile SAPBEX.trc opened at 10/28/2008 11:06:07 AM
User () at system ()
Component Excel-AddIn(Version 3500.11.051) active at 10/28/2008 11:06:08 AM
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:                - isConntected: false
XLA:           11:06:09 registryGet failed
XLA:                - entry: chooseTemplate=?
XLA:           11:06:09 registryGet failed
XLA:                - entry: chooseTemplate=?
XLA:           11:06:09 registryGet failed
XLA:                - entry: chooseTemplate=?
XLA:           11:06:09 registryGet failed
XLA:                - entry: showErrors=?
Thankx
rayyan

Hi,
Check your support package and patch level of your BEx Suite. BI 7.10 Support Package 6 Patch 1 works fine with Excel 2007.
You might also want to check your installation using the file "sapbexc.xla" on your hard drive. You should find it in C:\Program Files\SAP\FrontEnd\Bw or similar, although i'm not quite sure this works with BI 7...
Bye

BEx Analyzer workbook working strangely with reset_area functionality

Hi Experts,
In my BEx Analyzer I have got an input ready query for planning. It displays data correctly. In my workbook I have a button for variables, a button to save the data to planned cube and a button for reset. For the reset button i have used the function reset_area.
Problem - Reset button works clears the analysis grid with data. But once the data is saved reset button will not work. We have to click on the variables button to reset the grid. So again the variables screen will pop up. As a result the end user is confused. Is there a unique behavior for BEx Analyzer. User found that reset button is not working after saving a result.
Is there any workaround for this. Please clarify on the issue.
Thanks and Regards,
Jerry

Hello Jerry,
Functionality of reset will work only before Save ,once data is been saved no reset operations can be performed.
After Save only refresh is performed which can fetch you the data been saved .You can educate users that reset can be done only until save the data once data is been saved they can't system can't erase it completely however they can change key figure values.
Can refer to link below:-
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/45/9d0fbe42c40063e10000000a11466f/content.htm
Hope it may help.

Bex Analyzer not connecting

Hi
I'm working on a new implementation. The Bex query designer, WAD and report designer all give me the log on box when trying to connect.
But the Bex Analyzer does not come up with this options. It just shows the normal Excel screen and when I click on the offnen (open) icon, nothing happens. My security setting in Excel is low.
Do youhave any idea?

Strange, it won't let me access the note now on the market place either. I did however save the note at the time we needed it so i'm certain it's the right number. Basically the note only points you to download a windows patch which fixed the issue for us;
SAP Note 1025122
Summary
Symptom
You start the BEx Analyzer after you have implemented the BI tools.
When you start the BEX Analyzer, the system displays the Analyzer toolbar, but it does not execute the functions when you choose the pushbuttons.
Other terms
Install Microsoft fix 907417 on your affected PCs (can be downloaded from Microsoft Help and Support under http://support.microsoft.com/kb/907417/).

BEx analyzer not working on GUI 7.10

Similar Messages

Maybe you are looking for