BEx Analyzer: Strange rectangle symbol

Hello!
When using the Navigation-Item in BEx Analyzer an strange symbol occurs by selecting only one value.
For an Example look at this <a href="http://666kb.com/i/anemsvej03bd7lsv7.jpg">screenshot</a>.
This rectangle disappears when selecting two or more values.
Do you know how to remove this rectangle?
Thanks in advance!

If the data is coming from mainframe systems you get that kind of symbols in your data.
I used to get that symbol with data.Please check the data in the target for that record.
Thanks,
Srinivas

Similar Messages

Wrong Currency shown in Bex Analyzer / SFr. Symbole in Excel

Hi Experts,
Hi have a question regarding the display of currency in Bex Analyzer.
I have a report showing Euro in the most of columns and one column should shown usd. The conversion is done in the backend.
By running the report the column which should show USD show SFr. (Not a currency).
In Excel i checked in format cell--currency. There SFr. is define as Symbole. It is a general problem. How to solve it?
Thanks
Gilo

Hi Andrey,
thank you for replying.
Have you added IO currency to rows ?
-- Other Columns with Euro are showing the correct currency.
Does your conversion work correct ?
-- Yes
If you execute the report in bex query designer (via web) do you get correct results ? i can not execute via web.
I execute in rsrt and the column is showing the result with $. I expected to see USD.
1. why is bex showing the wrong currency?
2. why is the result under rsrt with $ instead of USD?
Thanks
gilo

Currency symbol in Bex Analyzer

Hi gurus!
I have to key figures. One has a value in dollars and the other in mexican Pesos.
Now, in Bex Analyzer, the dollar symbol is in the left of the value and the symbol of the pesos is in the right of the value. Could I change the dollar symbol to the right of the number? Is ti possible? How?
Thanks in advance.
Regards.

SPRO -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> General Settings for Reporting and Analysis -> Set Alternative Currency Display
OR
spro->bw->reporting relevant settings->alternative currency display.
Here u can change after value or before value

BEx Analyzer workbook working strangely with reset_area functionality

Hi Experts,
In my BEx Analyzer I have got an input ready query for planning. It displays data correctly. In my workbook I have a button for variables, a button to save the data to planned cube and a button for reset. For the reset button i have used the function reset_area.
Problem - Reset button works clears the analysis grid with data. But once the data is saved reset button will not work. We have to click on the variables button to reset the grid. So again the variables screen will pop up. As a result the end user is confused. Is there a unique behavior for BEx Analyzer. User found that reset button is not working after saving a result.
Is there any workaround for this. Please clarify on the issue.
Thanks and Regards,
Jerry

Hello Jerry,
Functionality of reset will work only before Save ,once data is been saved no reset operations can be performed.
After Save only refresh is performed which can fetch you the data been saved .You can educate users that reset can be done only until save the data once data is been saved they can't system can't erase it completely however they can change key figure values.
Can refer to link below:-
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/45/9d0fbe42c40063e10000000a11466f/content.htm
Hope it may help.

BEx Analyzer: Formula Variable with Replacement path change Month with Day

Hi experts I'm facing this issue in BEx Analyzer.
I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
The formula works but it behaves in a strange way:
if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
anybody has faced this issue before?
any help will be appreciated
Daniele Cortopassi

Hi Daniele,
This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
Thanks,
Arun Bala

Variable screen not seen when running BEx Analyzer

Hi Gurus,
when i execute my query in BEx Analyzer for some reason i dont see my variable screen and it gives me a message saying variable values not entered. If i run the same report in RSRT i do get my variable screen. It was all find till yesterday and for some strange reason i dont get to see my variable screen.
Can anyone help me
Surya

What version are you on?
Did you try resetting personalized variables? You may have hit that by mistake, happens a lot here. Not sure that would be the case with no values entered however.
Al B.

Bex Analyzer not connecting

Hi
I'm working on a new implementation. The Bex query designer, WAD and report designer all give me the log on box when trying to connect.
But the Bex Analyzer does not come up with this options. It just shows the normal Excel screen and when I click on the offnen (open) icon, nothing happens. My security setting in Excel is low.
Do youhave any idea?

Strange, it won't let me access the note now on the market place either. I did however save the note at the time we needed it so i'm certain it's the right number. Basically the note only points you to download a windows patch which fixed the issue for us;
SAP Note 1025122
Summary
Symptom
You start the BEx Analyzer after you have implemented the BI tools.
When you start the BEX Analyzer, the system displays the Analyzer toolbar, but it does not execute the functions when you choose the pushbuttons.
Other terms
Install Microsoft fix 907417 on your affected PCs (can be downloaded from Microsoft Help and Support under http://support.microsoft.com/kb/907417/).

Text characters displayed as # on Bex analyzer (excel)

Hi all,
I am having issues with Turkish Charaters displayed on the report output on Bex analyser.
The Turkish text characters in the fields like Name 1, Name 2, city are displayed in # format.
This is happening only when the report is executed on Bex analyzer (excel). In BW system I can see the turkish characters properly. There is no # symbol anywhere when i check in cube or master data.
The # sign is not shown when the query is executed on internet explorer(web report). This issue is only with Bex analyzer(excel).
Some sample data is as below.
Correct data in BW cube or master data: ÜCRETLI ÜRETICISI TÜ
The same is displayed when executed the report over web.
But when executed on BEX analyzer(Excel) it shows as: #CRETLI #RETICISI T#
This was not happening last month. I was able to see the turkish characters last month properly on BEX analyzer.
Now we are having this # issue.
Can anyone suggest what could be the problem with? and how we can rectify this?
Thanks in advance

Hi Maddy,
I also think it is a front-end issue.
The texts look fine in RSA1 and in Web Analyzer.
The problem with the codepage variable is that as far as i know it can have only one value.
On my report I have a list of purchase orders with the vendors.
The vendors come form different countries and are maintained by the country's affiliate in their native language.
The user needs to see the texts for all displayed vendors regardless the language and alphabet.
Right now I have probelms with Greek, Bulgarian and Serbian.
But next month the report may contain the vendors from other countries.
Therefore I would have to add all languages to codepage variable.
In fact in my system it doesn't even work for one value.
I also added other languages to windows regional settings but it didn't help.
Do you have any tips on that?
Thanks,
Marek

BEx Analyzer (7.x): currency change when new formula created

Hi All,
I have a strange one. Query is executed in BEx analyzer. A new formula is created outside the query results window using excel functionality, and the currency changes from USD to DM.
Example query results:
Cell A1: Var 1 = $150.00
Cell B1: Var 2 = $160.00
Cell C1: Var 3 = $70.00
New formula created using excel functionality: =sum(A1+B1) displays as 310.00 DM
The language settings have been checked for the operating system and for SAP (user data) and they appear to be correct. Is there another setting to be checked?
Thanks,
Pam

sap said it was working as designed. suggested we look at regional settings on laptop and make a workbook template with us settings.

BEx Analyzer Error "NO APPLICATION DATA FOUND".

Hello Experts,
I have a problem, when i am going to create a query in BEx analyzer.
I got this Error "NO APPLICATION DATA FOUND".
I already check that Particular InfoCube, The Cube is fine and also it contains Data.
But the Problem begins Same.
Thankyou,
Kshitij Deshmukh

Hello,
I have solved this problem on my own.
Solution: 1st check your target over query is excuting...there is data or no... in Tcode "LISTCUBE".
Then data is available... or not.
If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
check ur data is ready for reproting.... i means reporting icon is available or not.????
If the Problem begin Same "NO APPLICABLE DATA FOUND".
Then the Problem in Loading.
2. Click on cube choose manage tab...there will be reproting symbol....
Need to check each steps if data is there or Report not running....
Finally delete the request then again load the data..and icon should come automatically...
3. There is R and below one excel sheet fighre...icon
4. Go and make a Report in BEx Analayzer..
Data will fetching Automatically....
Thank you
Regards
Kshitij Deshmukh

BI 7.0 Bex Analyzer not working with excel 2007

Hi All,
I have installed the BEX 7.0 with MS office 2007 but the Analyzer is not working. The open file symbol does not give any option on the click.
Please help.
Regards,
Abhishek

Hi Abhishek,
This is a BEX Add-in problem.
Follow the below step....
1. Copy the Tool
2. Change the Tool.xls into the Tool.xla
3. Copy the Tool.xla file
4. Open My Computer window
5. Navigate to the following folder
a. C:\Program Files\Common Files\SAP Shared\BW
b. Paste Tool.xla file into this folder
6. Open Bex Analyzer
7. Open a Query or Workbook
8. Click on the u201CToolsu201D Menu on the Top
9. Select u201CAdd-Insu201D from the Tools menu
10. Click Browse from the Add-Ins window that opens
11. Browse to the file you just saved
a. C:\Program Files\Common Files\SAP Shared\BW\ Tool.xla
b. Click Ok to continue
12.The Tool for Excel should not be checked in the Add In window
13.Click Ok to continue
14. Close
15. Re Open Bex Analyzer
16. The Tool command should be displayed at the top of the Tool Bar
17. Close Bex Analyzer
18. Open Excel
19. The Tool command should be displayed as well at the top of the Tool Bar.
Hope this helps...
check the below link
http://www.sytecpa.org/software/BWInstructions/Installing%20the%20SAP%20BEx%20Analyzer%20Excel%20Add-In.pdf
Regards
KP

BEx Analyzer, Office 2007, Windows XP Issue

I am having a problem getting BEx Analyzer to work with Office 2007 on my Windows XP machine.
Configuration:
Windows XP SP2 with all Windows updates
SAPGui 7.10 with Patch 2
Office 2007
SAP NetWeaver BI 7.0 Stack 12
According to the <a href="http://https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000676672&">BEx Compatibility of MS Operating Systems and Office Products</a> my configuration should work. I am able to start BEx Analyzer and select a query to open, but then it fails on the load. I get the following error:
A critical program error has occurred.
Below is the trace log. Any help would be appreciated.
BExConnect.Trace3: 0
BExExcelTraceListener.AddTraceListener: Added a tracelistener for Version: 7100.0.461
BExConnect.constructor2: 99.53125
BExMenu.CreateSubMenu1: 0
BExMenu.CreateSubMenu2: 2.5
ListSeparator: ,
GetSystemInformation
SUNI Const: 0
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 0.3125
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 0.3125
CommunicationFactory.GetSystemInformation (Setting init Propties)): 0.3125
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 1.71875
RSR_XLS_RFCtrc: 9.84375
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 16.09375
CommunicationFactory.GetSystemInformation (XML Stuff)): 20.46875
CommunicationFactory.GetSystemInformation (Prop Stuff)): 20.46875
CommunicationFactory.GetSystemInformation (Version)): 20.46875
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 20.625
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 0.15625
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 20.78125
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 2.34375
CommunicationFactory.LogOn: 144.53125
RSR_XLS_RFCtrc: 0.625
BExThemes.LoadFromBackend: 4.84375
BExThemes.LoadFromBackend: 0
BExConnect.LogOn: 299.21875
RSR_XLS_RFCtrc: 0.625
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
RSR_XLS_RFCtrc: 1.25
openworkbook with param
OpenWorkbookGetTheMimeAndStoreItOnTemp
BExItems.CreateFromDeSer: Trying to deserialize the Items...
6/25/2007 7:54:58 PM----
System.NullReferenceException: Object variable or With block variable not set.
 at Microsoft.VisualBasic.CompilerServices.Symbols.Container..ctor(Object Instance)
 at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
 at com.sap.bi.et.analyzer.addin.BExExcelItem.SetDesignShape(BExParameter iParameter)
 at com.sap.bi.et.analyzer.addin.BExExcelItem.Create(BExParameter iParameter)
 at com.sap.bi.et.analyzer.addin.BExItemTextElement.Create(BExParameter iParameter)
 at com.sap.bi.et.analyzer.api.BExItem.CreateInternal(BExParameter iParameter, BExApplication iApplication)
 at com.sap.bi.et.analyzer.api.BExItems.CreateItem(BExParameter iParameter)
Object variable or With block variable not set.
 at Microsoft.VisualBasic.CompilerServices.Symbols.Container..ctor(Object Instance)
 at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
 at com.sap.bi.et.analyzer.addin.BExExcelItem.SetDesignShape(BExParameter iParameter)
 at com.sap.bi.et.analyzer.addin.BExExcelItem.Create(BExParameter iParameter)
 at com.sap.bi.et.analyzer.addin.BExItemTextElement.Create(BExParameter iParameter)
 at com.sap.bi.et.analyzer.api.BExItem.CreateInternal(BExParameter iParameter, BExApplication iApplication)
 at com.sap.bi.et.analyzer.api.BExItems.CreateItem(BExParameter iParameter)

Hi Tyler,
Please check to make sure that you are on the correct support package.
For Microsoft Office and Vista support, you need to be on SAP NetWeaver support package stack 12, which is equivalent to SAP NetWeaver BI support package 13.
Please see https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000674496& for the mapping of BI support packages to NW support package stacks.
See also https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000676672& for Microsoft compatibility information.
Regards,
Katie Beavers
SAP NetWeaver Product Management

Text variable to be removed from the description on Roles in Bex Analyzer

Dear Experts,
I am using BI 7.0. I have text variables in the query description. When the queries are assigned in Roles, they are displayed alongwith the text variable. I need to change the description of the query only in Roles. I am successful in doing this change on portal. But, in Bex Analyzer, I tried changing the description of these queries in Roles, but still they are not changed. Strangely, I can see the new descriptions in Roles when executed through RSRT.
Can anyone please help me in resolving my issue.
Thanking you in advance,
Best Regards,
Pradnya Rane

Hi Parth,
Yes, I mean in 'Open Query' option. This is working in BEx 3.5, but not in 7.0.
Is this some missing functionality in BI 7.0?
-Pradnya

Error when starting Bex analyzer

Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontus

hi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls.

Satatus of Data in Bex Analyzer

Hello ,
is it possible to hide "status of data" in bex analyzer ? I have read some documents but all are say it is only possible with Web Designer.
I have a query from a Multiprovider and I don't wnt to show Status of data information in the report .
thank you ,
blue

You can goto design mode in the workbook and delete the text element which is showing status of data, come out of design mode and save the workbook.
Edited by: Pravender on May 18, 2010 2:19 PM

BEx Analyzer: Strange rectangle symbol

Similar Messages

Maybe you are looking for