BEx based on infoset

HI Gurus,
I created Query based on infoset.
later, i added some fields in ODS then adjusted Infoset at T-Code RSISET.
i can see that new field here and values also coming on it.
but when i am editing Query, i am not able to see that new field.
Plz provide your inputs.

SSMS,
after you change the infoset - log off and log into BeX again -... also refresh the Infoprovider window - using the refresh button at the top...
Arun

Similar Messages

I am facing a problem in a crystal report which is based on Infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
Srinivas

Hi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo

I am facing a problem in a crystal report which is based on Infoset query.i

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

Inactive InfoObjects in MultiProvider based on InfoSet after Upgrade NW04s

We are upgrading our sandbox environment from BW 3.5 to NetWeaver 2004s or BI 7.0. We have done a technical upgrade and are currently using the obsolete authorizations. In testing we have discovered that our MultiProviders that are based on InfoSets contain inactive InfoObjects. Has anyone else had this problem. In running a query that uses this MultiProvider we get the message to activate our MultiProvider again.
Is it necessary to activate all existing MultiProviders based on InfoSets after upgrading to NetWeaver 2004s?
Thanks for your help,
Jeri

Hi Jeri,
Yes this is sometimes required.
Infosets are sometimes deactivated because additional checks are available after the upgrade or because new attributes become part of your info-object.
When you change something to an underlying data provider of a multiprovider, the multiprovider is automatically inactivated and you have to reactivate it.
I also had this problem with other upgrades.
In general, activation is not too much of an effort.
Please assign points if this solved your problem,
Best Regards,
Filip Ledoux

Variables in the query based on infoset

Dear all,
I defined a variable on an infoObject in the query designer. However, when this infoObject was used in the infoSet, the variable I defined could not be seen. So in the infoset how can I use the variable I defined in other query not based on infoset? Please advise. Thanks.
Jin Ming

I have the same problem:
I created an Infoset where I am using an Infoobjet that is used in a Cube.
I have defined variables on this Infoobjet but one of them cannot be used in the new Infoset even if in the new Infoset the links between infoobjets are the same as in the Cube.
Thank you for any help.
Stanislas

Generic Data source based on Infoset

Hi,
I have a Generic data source based on Infoset. i need hostorical data from this data source, when i extract it is given me only current data. Infoset based on PNPCE logical database, in the Infoset query (ECC6) when i select "All" it gives all data, but when i extract with RSA3 with perticular personal number it just give me 1 record,
Please help me to fix this problem.
Thanks

i think you mean to get data relevant to a date. have you setup the begda/enda as selection parameters in the generic datasource? that would be the only aside from a custom program to first fetch the data and then send it to bi.
with the dates, you can pull it with the relevant date range setup in the infopackage

Data Source based on Infoset.

Hi Experts,
I have a datasource based on Infoset.This infoset is the join of two tables.
There is one additional field in this infoset(Timestamp)
Now, due to change in the requirement I have to delete this timestamp.I am unable to delete as it is saying it is used in the Query.But I am not getting how to remove this from Query.
Query Name is coming as :
SY000000000095 Generated Query SY000000000095
SY000000000096 Generated Query SY000000000096
SY000000000097 Generated Query SY000000000097
SY000000000098 Generated Query SY000000000098
SY000000000100 Generated Query SY000000000100
Please help

Hi,
The infoset may have been created using the query infoset.
Go into SQ01, identify the queries and delete them.
Cheers
Neeraj

Use of an Oracle Hint for a WebI-Universe BEX based-Query ?

Hi,
can I use an Oracle Optimizer Hint like /*+ PARALLEL(MyFacttable, 8) */
for a WebI- ./. Universe- ./. BEX based-Query ?
Is this possible ?
If Yes: How and where to implement this ?
Thank You !
Martin

Hi,
BusinessObjects only communictates with the MDX Interface by way of SAP's OLAP BAPI over RFC.
Everything else, OLAP engine, Data Manager, etc etc Cube abstraction over a Relational schema is handled by the BW application.
so No, BO can't "inject" any cleverness into BW processing architecture.
Regards,
H

BEx query problem which based on infoset

Hi, BW experts,
     Now I created a infoset which connect one ODS and one infoObject, ODS structure: CIO_CO_Area, 0Company, K1, KF1, K2, KF2 ( KF1 and KF2 are data field to store numeric value)
     InfoObject is 0CO_Area (connect to ODS.CIO_CO_Area)
     I can see the value in listcube as following:
0CO_Area , 0Company, K1, KF1, K2, KF2
0001    ,       0001    ,     A1, 20,    B1, 40
0001    ,       0001    ,     A2, 40,    B2, 100
    but when I create the BEx query with tabular format, the result show as following,
0CO_Area , 0Company, K1, KF1, K2, KF2
0001    ,       0001    ,     A1, 0,    B1, 0
0001    ,       0001    ,     A2, 0,    B2, 0
the key figure can not display properly, anyone can help me out?
thanks in advance.

Let me see if this example of what I'm seeing makes more sense:
Order | Doc No. | Account | Type | *Amount* | *abs(Amount)* | *Percent* | Expected Percent
   1            1          1          A          20            20          200%           40%
   1            1          2          A         -30            30          300%           60%
                                   +Result+     -10           -10
   1            2          3          A          40            40          100%          100%
   2            3          4          A          50            50          100%          100%
The absolute value of the Amount column is calculating the result of the original values (with the original signs). This result is being used in the Percent (%CT) calculation which is causing the calculated percent to be wrong. I tried changing the "Calculate Result as" setting to Summation which corrected the result row (in the above example it would show 50 for the abs(Amount) column) but the %CT calculation is still incorrect.

Keyfigure values are incorrect in BEx Query based on infoset

Hi Experts,
I have created a infoset using 3 DSO's . 1 main DSO( from which i rquire all the data) is linked with other 2 DSO's using left outer join. DSO is linked with other 2 DSO's with a field return GUID .
Now when i am executing a query , key figure values are coming incorrectly because suppose if there is 1 record related to
RETURN GUID in main DSO and there are 4 reords in 2nd DSO with the same RETURN GUID then in infoset data 4 rows are getting created with the replication of all the fields from first DSO against those 4 rows. So in query result amount field is getting 4 times of its original value because of aggregation of all those 4 rows.
I don't have set of key fields by which i can link the all the DSO's to get unique linking of records.
How can i get the amount only one time in query result?
Hope i am clear.
Please help. I need to create report urgently.
Regards,
Ajay

Hi Ajay:
Please take a look at the blog series provided by Sunmit Bhandari.
Infoset Keyfigure multiplicity Part 1
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-1
Infoset Keyfigure multiplicity Part 2
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-2
Infoset Keyfigure multiplicity Part 3
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-3
Regards,
Francisco Milán.

Webi base on BW query based on Infoset comes back with wrong values

Hello:
I have a Webi report on an OLAP Universe, on Bex Query.
The bex query is based on 1 INFOSET.
When I run the webi report the values that comes back a totally wrong values.
The correct results are not brought back.
When I do a test with crystal reports to the infoset, I can see the correct values. (I'm aware crystal uses different drivers).
The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
Webi on Infoset based BW Query comes back with wrong data.
query is simple.
Pull in 3 attributes, 3 key figures, where componentkey = "111"
I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
I get many rows in webi (almost like a CARTENSIAN product).
I search a round this forum but still did not see a conclusive answer to this problem.
But I see another thread that several others faced this same issue without a resolution.
My environment.
BOE XI 3.1 SP2
No fix packs
SAP IK 3.1 SP2
HPUX-IA64
Thanks in advance for any help.
Dwayne

Was this problem ever solved?
I am having a similar problem with an infoset based query.
I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
Cheers,
Andrew

Search on key or text in query (based on infoset)

Hi all,
I've build an infoset based on the masterdata 0employee and an ODS. After that I build a query on the infoset with in the rows the object 0employee. On this object I created a user-entry variable. By executing the query, the variable screen will be available. When I click on the search button (or F4) I only see the key values. I want to display also the TEXTvalues, is this possible...and what is my action to do?
I hope my question is understandable
Regards,
Pieter

That is strange. I havent seen that happen.
Sometimes infoobjects have too many attributes and you may have to scroll a long way to get to the texts.
or does it just show the keys and nothing else ?
Did you check what the default description is set for this infoobject on the BEX tab page in infoobject maintenance. Are you filling up the text in the default (short Text) or are you filling up some other length.
Check the filter display box on this tab as well to see if you have the appropriate selection. Try changin it to see what happens.
Message was edited by:
A S

How to create a report in bex based on last data loaded in cube?

I have to create a query with predefined filter based upon "Latest SAP date" i.e. user only want to see the very latest situation from the last load. The report should only show the latest inventory stock situation from the last load. As I'm new to Bex not able to find the way how to achieve this. Is there any time characteristic which hold the last update date of a cube? Please help and suggest how to achieve the same.
Thanks in advance.

Hi Rajesh.
Thnx fr ur suggestion.
My requirement is little different. I build the query based upon a multiprovider. And I want to see the latest record in the report based upon only the latest date(not sys date) when data load to the cube last. This date (when the cube last loaded with the data) is not populating from any data source. I guess I have to add "0TCT_VC11" cube to my multiprovider to fetch the date when my cube is last loaded with data. Please correct me if I'm wrong.
Thanx in advance.

Create aging bucket in BEx - based on date variable

Hi everyone,
I have a report for which we need to create account receivable aging bucket to classify arrears (1>29 / 30>59 / etcu2026).
Our solution overall architecture is the following :
Source System (SAP) > BW back end...Multiprovider > Super BEx Query > Universe > Webi Report
BW 7.0
BO XI 3.2 SP3.0
In this report, each bucket is defined by the difference between:
-     the Net Due Date (which is the due date of payment of the invoice)
-     and the Current Date (date for which the report is run u2013 can be the date of the day or a date in the past)
We can develop this either in BEx or in Webi, but to avoid potential performance issues in Webi, we take the try to develop this in BEx.
As you can easily imagine, this BEx query will be used for many reportsu2026so not only for this specific report.
What weu2019ve done so far:
1-     We created a variable to prompt the user with the date he wants to run the report for
           - ZTEST is an optional variable, single value, User input, based on characteristic 0CALDAY
2-     We developed RKF in BEx
-     Key Figure restricted by Amount
-     Net Due Date restricted by the variable ZTEST using the between function and an offset (to determine the range)
=> When we save the query we are getting a warning message saying u201CVariable ZTEST for characteristic Net Due Date has been converted to a required entryu201D
Why? (you probably knowu2026) Because my RKF is using a variable with an offsetu2026which automatically turn on my variable as mandatory and no more as optional.
Consequences:
-     In BEx: My variable, which is required to be optional (because we donu2019t have to have this field as mandatory for each and every report running on top of this query) is now mandatory.
-     In Webi: If I use the variable (funnel in webi), my report is working fineu2026but if I donu2019t use it in the webi report, I get an error message saying u201Cvalue required for ZTESTu201D
o     Funnel is configured as optional in the universe designer (so the issue is not coming from here)
=> 2 consequencesu2026same issue
Question: What can we do to keep our bucket logic running in BEx and avoid this variable to become mandatory?
Solutions (potential)
-     Create a custom exit routine to work around this issue u2013 how?
-     Create CKF/Custom exit to create our bucket (using ZTEST as an entry value to determine the range) and then use the created range in our RKF to restrict the amount u2013 how? Not so easyu2026
-     Build the logic in Webi
-     Any other suggestions?
Here we are, any advice would be really appreciated
Thank you guys
Regards
Henri

Hi peeps,
We finally find a solution for this problem! So I can share it with you.
The overall solution is pretty easy to understand.
1st step is to prompt with the user with a 0DATE variable. The date selected becomes a date input for the next step.
The variables is defined as a range [01/01/1900;variable_value)...in order to retrieve the right data set.
2nd step is to use this date to create our aging bucket, dates range.
To do so, we created 4 user exit variables (for each aging bucket).
3rd step is to use these ranges in RKF.
This way you get aging bucket dynamically defined by the user input pretty cool!
Regards
H

How to increase performanceof query based on Infoset?

How to increase the performance of a query based on a Infoset?
As per designing of query, all the necessary fields are placed where they are required.

Hi Akshara ,
To improve performanceof query try to remove unnecessary characteristics, attributes, or key figures ,Superfluous conditions or variables .Large InfoCubes and Complex hierarchies .Variables populated by user exits
For characteristics specify either variables or restrictions .
You can create indexes on DSO and Aggregates on cubes (if any).
Please go through the links :
http://help.sap.com/saphelp_crm40/helpdata/en/77/4a213cc534f20ae10000000a11402f/content.htm
Re: Performance of query built on infoset
Query performance issue - Infoset query
Hope you will find this helpful.
Regards,
Jaya

BEx based on infoset

Similar Messages

Maybe you are looking for