BEx Broadcaster and Variable popup on General precalculation setting

Hy expert's , i have this serious problem: on bex broadcaster, when i use the Create link to configure a variable assignment of the broadcasting settings, a window popup appear and it don't contain variable screen but the Web Analyzer.
Could you help me?
Than'ks a lot.
Sincerely yours
Andrea Maraviglia

Hi,
Did anyone find a solution to this? I'm facing the same issue on production portal.
Its disturing the broadcasting functionality.
Appreciate if you can provide a solution.
Regards,
Seema Rane.

Similar Messages

Bex Broadcasting and variable variant

Hello,
I have a workbook with queries using 0CALDAY. I want send by email in Broadcasting, I need get the current day for 0CALDAY but the variant dont have the posibility of D (Dynamics Variable) only the option T is in the match-code. (I cannot put change the query because I need for other proposed)
Please, What is the way for take the current day in a workbook for broadcasting?
Thanks in advance,
Luis Maria Lorente
PD: I promise to award the points.......

Hi Luis.
Did you get an answer for this?
Can anyone else help?
Patrick

Manual or steps on BEX Broadcaster and reporting agents

Hi,
Please provide the manual on how to Sending Workbooks by make use of BEX Broadcaster and Please provide the manual on how to Broadcasting by make use of Reporting Agent functionality and usage."
your early help is highly appreciated
Thanks , Karthik.

Hi,
->Create and save a workbook
->Open the created workbook in the in the Bex Analyzer
->go to Bex Analysis Toolbox and click on Tools button
->Login to the IB page to create settings
->create a new setting by giving the appropriate e-mail id
->In the Texts tab give the subject and Text
->Provide the variable and server details
->click on schedule and give appropriate date and time.
Hope this helps...........
Rgs,
I.Ravikanth

Bex Broadcasting and trying broadcast email

Hi Gurus,
Iam Using Bex Broadcasting and trying broadcast email.
but it is raising an Error.
    -->Settings were started from the BEx Broadcaster
    -->Processing for user SUMANB, language EN
    Processing setting
   -->The query was successfully generated.
-->Error: com.sap.ip.bi.webapplications.runtime.controller.MessageException: The Web template "0QUERY_TEMPLATE_BROADCAST_PDF" does not exist in the master system.
How to assign a printer. to print the reports.
Points are assigned for proper answers.

Hi,
Trying a 'Find' in the 'Web Application Designer', for this template.
If not available, go to 'RSA1', 'BI Content', choose 'BEX Web Template' and double-click on 'Select Objects'. The template should be here.
Highlight and 'Transfer Selections' and you will install the template.
Now try your broadcasting again.
If it still does not work, you will need to go via 'SPRO' - just reply and I will explain if the first part above does not solve it.
Thanks
Scott

Variable Assignment in General Precalculation tab of BI 7.0 broadcaster

Hi,
In the broadcast setting, under General precalculation tab variable values can be set up. When we are clicking create variable values, screen with all the variables of the query were coming.
After entering data in the variables and clicking OK, values are not being transferred to the Broadcast setting. The variable page remains like that with out transferring to the Pre Calculation tab.
We are on SAPKW70020.Distribution type used is Broadcast email, output fornat is MHTML. I tried with other output types, but same result.
We are using query as the object type for creating Bex Broadcaster.
Has anyone ran into this issue before?
Thanks & Regards,
Pradeep

Hi Mohan,
You have opened up an old post, so many responses might be to answer the initial question.
However, to answer your question, when you click 'Create' next to the 'VAR01 in Variable assignment, what you see is a popup window with the 'Ready for Input' variable present in your query/ workbook/ template, which is the same variable screen which you get when you execute the same query/ workbook/ template independently. You can then enter values for those variables and click OK, to save it and to be passed to the broadcasting setting. The broadcast would then happen for the same variable values.
However, if you face the issue mentioned by Pradeep, then after clicking OK, you can cancel the popup window. The values of the variables would still be passed.
After the popup window closes, you can see the 'Create', you initially saw, replaced with 'Change'. This means the values are saved.
Hope it helps.
Thanks,
Abhishek.

Broadcasting and Variable Assignment

Dear Experts,
I want to assign variable in broadcasting dynamically. For example, this variable will be changed every month. I tried to set the variant on BEx Analyzer, and looked into the table TVARV, but I couldn't find my variant in that table. Is there any way to assign variable dynamically?

Hi CSM Reddy,
1. while creating your Broadcasting Settings ... you can use your Variable for OLAP Cache.
    Question1. How and where can I use variable for OLAP Cache in broadcasting. What I just see is variable assignment in the General Precalculation tab
    Question2. Variable for OLAP Cache you said is the same as the variable created in Query Designer, right?
2. then you make sure the variable in Bex is setup with "Ready for input" unchecked
    Question1. I have to allow users to input month to see the report in the month they want, so I think I can't default the value for this variable.
    Question2. What do you mean 't Type variable'?

Bex Broadcasting with Variable

Hello Gurus,
I have a BI Report that has calendar date as selection screen which by default displays current date(18.03.2011) .
After running the Report and scheduling the report to send through email every day via Bex Broadcasting tool. That works fine for today (18.03.2011).
But tomorrow when I receive the report through the email . This variable automatically not changing to tomorrows date ie 19.03.2011 so still shows the data for 18.03.2011.
Is there any way to change this date field automatically through Broadcasting .
Thanks for your resposne.

You have two options:
1) If the calendar variable is not ready for input then it will automatically update.
2) I am assuming you created a variant and the broadcast always shows the data for the day you saved the variant. In BEx 3.5, you can save a variant without saving the value for calendar day. This variant will force the default value every day. If you didnot create a variant and are just setting the variable values in the broadcaster, then you should create a variant as explained above and set the broadcaster to use the variant.
Vineet

BEx Broadcaster and Precalcualtion server in BI 7.0

Hello All,
I have below queries request your inputs.
1. When I go to BEx Analyzer > Workbook> Bex Broadcasteru2026 I am not getting a popup requesting for SAP credentials. I am sure there is something missing in my SPRO or SICF.
2. When I Test my BEx in SICFu2026 its saying page not displayed.
3. Do we need Enterprise portal to Broadcast workbooks through Precalcualtion server in BI 7.
Thanks
Rakesh.

It is possible to do the charts in the BEX Analyzer. For this you should have BI 7.0 with SP 13 and the configuration of BEX Analyzer to BI system.
If u give me u r mail id i will send some documents.
Assign points
Thanks and regards,
Syed
Message was edited by:
Shahid Syed

Unable to publish to Portal and BEx Broadcaster in WAD

Dear SDN Experts,
We are experiencing the following problem when trying to publish or broadcast a Web Template from BEx WAD to EP portal:
(we are using BI 2004s, SP10, Revision 263 of BEx WAD)
When we create and save a new Web Template, we choose from the menu Web Template -> Publish -> to Portal or BEx Broadcaster. These two options are active but when we click on either of them, nothing happens. The system is not responding in any way.
Does anyone have an idea what might cause this problem?
We have thought it is an authorization issues either on the BI side or on the Portal, but as we have granted all neccessary authorizations we can state that it does not seem to be an authorization problem.
I will very much appreciate your help!
Thanks in advance,
Ivan Giurov

Hi Ivan,
Make sure ABAP and Java Stack are communicating. Run RSRT2 --> Java Web to make sure you are communicating with Portal.
Can you please check if you have authorizations to use Information Broadcaster?
Authorization object: S_RS_ADMWB with the field RSADMWBOBJ = BR_SETTING
Logon to Java Stack Portal --> Business Explorer --> BEx Broadcaster and test it from here. so that you are not having any problem with authorizations or connectivity.
thanks,
Deepak Kunavarapu

Variant for Control Query on Bex Broadcaster Filter

I am trying to create a Bex Broadcaster setting on a query via query designer (query -->Publish --> Bex Broadcaster). In the Filter Navigation Tab, I want include a filter using a control query with variants. My control query has a variable that is set to (single value, mandatory,manual input) and i created a variant for the control query on the web. I am able to create the Bex Broadcaster setting and enter my control query but when I go enter the variant it always gives me "No selections available".
Another issue that i am having is - when I try to create a filter on a characterisitc in the Bex Broadcaster and give mulitple values in the filter, it ends up generating seperate excel files (distribution type is e-mail) for each value in the filter. Is there any way i can consolidate all these results and get it to generate on single file?

1st : no wanswer by now.
2nd : don't filter in the Broadcastsetting, filter in the Broadcastquery to avoid a broadcast for every filter value.
Edited by: Heinrich Krupp on Apr 16, 2009 11:44 AM
Edited by: Heinrich Krupp on Apr 16, 2009 11:44 AM

Bex broadcaster from web goes in infinite loop

Hi All,
After executing a query in web, when we click on the send button for the Bex broadcasting wizard to appear, the page keeps loading and the wizard does not appear.
Please can you give some pointers....
Thanks in advance

Hi Sireesha,
Can you right click on the Analysis item and go to Broadcast and Export->Broadcast E-Mail and check whether this opens the Broadcasting wizard?
Disable the pop ups,if you have for the browser
You can also open the query in BEx Broadcaster and can create the Broadcast setting through wizard to broadcast a query.
Rgds,
Murali

NW04S Publish to Bex Broadcaster Option Does Nothing

I run Query Designer (NW04S FEP13), open any query, select option Publish -> Bex Broadcaster and nothing happens. I am expecting the create new setting screen to pop up but it doesn't. I have the required authorization.
We are running NW04S SP9.
Any input would be greatly appreciated. Thanks!

You may wish to check this
Note 760775 - Settings for Information Broadcasting
0QUERY_TEMPLATE_BROADCAST_PDF
Hope it Helps
Chetan
@CP..

BEx Broadcaster Send button - No Broadcast Wizard with Key Figures in Rows

Working in BI 7.0 SP 16, we are having an issue with BEx Broadcaster. For a typical horizontal query (key figures in columns), the send button in BEx on the Portal works properly and returns the Broadcasting Wizard. However, when using a query in a vertical format (key figures in rows), the window opended by the send button displays the "spinning wheel" and never procceds on to the Broadcasting Wizard.
I have checked for SAP notes related to BEx Broadcaster and was not able to find anything relevant.
The same query was tested with the key figures in columns and in rows. The Broadcast Wizard comes up when the key figures are in columns, but not in rows. Since it was tested both ways with the same query, I am assuming that the issue is related to the orientation (horizontal vs. vertical).
Has anyone else run into this issue? Is there a known limitation, or a patch available? Does anyone have a BI system with a query you could flip the key figures from columns to rows and give it a try?
thanks,
-Shawn

Shawn,
I'm having my own issues with BEx Broadcaster in the Portal, but from BEx Query Designer - Query - Publish - BEx Broadcaster, the BEx Broadcaster Wizard is available in both cases (Key figures in columns and key figures in rows).
Kim

Variable string "VAR_01" is not filled - BEX Broadcasting - General precal

Hello BEX guru,
When trying to use BEX broadcasting ->General precalculation (trying to precalculate liket the old reporting agent), i am getting this error. However, once going to the "Variable Values" to create I am getting the "BEX web Analysis" screen with prompt to "new analysis, open, save as...tab". I've tried using RSRT and create a global variable for one of my query that has the variable prompt but still nothing. Any help is greatly appreciated.
Cheers,
HarryT

Hi,
For the webtemplate, create a global variant. This variant you can use it the precalculation.
Ravi

Broadcasting - General Precalculation Variable Assignment

Hi All,
Just have a query regarding Broadcast settings for a bex Query with variables.
After creating the broadcast settings under the "General Precalculation"
Variable Assignment
> Determine from Variants options
Can anyone tell me where do we have to create these variants so as to select them from the Broadcast settings window and map it to the query varaibles??
Thanks
Rao

Hi Rao,
You just need to execute ur query ( either in Bex Analyser or Web analyser ). In the selection screen you can enter the values for ur variable & save as a variant ( ex: VARIANT1 ).
In broadcasting now click now variant tab there u can see the VARIANT1 which was created during query execution.
Hope this helps.
Regards,
Sheetal

BEx Broadcaster and Variable popup on General precalculation setting

Similar Messages

Maybe you are looking for