BEX Broadcaster does not work / open
Hello,
I'm trying to use the Broadcaster in BI 7 but when I try to open it (from the BEX Analyzer or the BEX Query Designer), it doesn't do anything, it even doesn't give an error.
Does anybody know what could be wrong ?
I've entered the standard web template for broadcasting in customizing so that's not the problem.
We don't have the Portal installed but I didn't think you need the portal in order to be able to use the broadcaster, am I right ?
Thanks in advance,
Yes, you dont need portal for broadcasting...
First test web reports through t-code RSRT, if web reports are working then check broadcasting templates through t-code RSCUSTV21& RSCUSTV27.
Regards,
shalin
Similar Messages
-
I purchased Oxford dictionary. It does not work (open). How to unload it and load on a working iPod?
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Button in BEX analyzer does not work
Hello Gurus,
I can open analyzer, but all the button for analyzer (such as open) do not work. will you please what 's wrong with it?
Many thanks,
Frank ZhangHi
Try this sapnote_0001121263
Edited by: Thorsten Kuhn on Dec 12, 2008 2:09 PM -
Alum BT keyboard does not work after wake up - but BT trackpad does!
Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
- I have tried power button banging on it for a long time and does not work
- open mbair and type password in and remove keyboard and repair and after several tried it will work
- then I can close mbair and use external keyboard
- painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issueHello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator. -
When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'
Some things to check:
#'''Browsing history must be saved'''
#*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
#*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
#'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
#*Using Clear Recent History
#**Firefox button: Firefox button > History >Clear Recent History
#**Menu Bar: Tools > Clear Recent History
#*When closing Firefox
#**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
#**Menu Bar: Tools > Options > Privacy (checked) > Settings
#**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
#'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
#*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
#'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore. -
I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
ThanksTake the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?
-
Pinch open and close does not work, can anyone hepl me?
The pinch feature does not work anymore on my macbook air
I checked in system preferences, trackpad, and this feature is 'checked'.
I have turned off the computer, what else can I try?
ThanksClick on the Apple icon at the top left of the screen. Select "System Preferences", then "Trackpad".
Be sure to select:
"Pinch Open and Close" in the "Two Finger" Menu...
Sly -
I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces? -
I am trying to open a service request and the site does not work.
I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.
I just went through several screens and had no problems. Try clearing your browser's cache and/or history.
-
TimedTrigger does not work after opening a popup on version 7.11
Hi experts,
In my application, there are 2 Windows (W_MAIN, W_POPUP) and 2 Views (V_MAIN, V_POPUP). I put TimedTrigger component to the first view, it is used for refreshing page automatically. W_POPUP and V_POPUP are used for opening popup.
The TimedTrigger works well on V_MAIN, but it does NOT work any more after the popup is used (opened and closed). The TimedTrigger just works again when the browser is refreshed.
The problem happens on Netweaver PI version 7.11 only, on version 7.1 is OK
Please give me your advice on it.
Thank you,
Ken Nguyen.
Edited by: ken nguyen on Jul 19, 2010 9:17 AM
Edited by: ken nguyen on Jul 19, 2010 11:35 AMHi,
have you found a solution to his problem? -
Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
hello,
I have 2 lab tops.. and have family members that use them.. I used to have FB open with mult family members accounts. Ad of today you updated to firefox 15..
Now when I go to use multifox 1.3.3 ( that is so you can have mult accounts open. ) .. if trying to go into Fb none of the features work. now since I have upgrade. it use to work fine.
So, the new FF does not work would like to unistall and go back to the old FF.. where I, can have mult accounts open at the same time and have the funcation work when your on the mult account in FB... Like talk to some one in FB chat. or just look at other items in the accounts.
if you can tell me how to fix this or can you please give me the old link back.. or tell me how to get the old link back instead of 15.. Because 15 does not work.
ThanksInstall or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
ICal: 'Open in Address Book' Function for 'Attendees' does not Work
iCal lets you drag a Contact from Address Book to the 'Attendees' field of an iCal Event. (You can also put the information into the field by typing the first few letters of the person's name, and Address Book will automatically populate the field with contacts containing those letters.) When you click on a contact in 'Attendees' and select 'Open in Address Book', it is supposed to open the contact's information in Address Book (in case you needed their phone number, forgot their wife's name, etc.). In the previous version of iCal, this ALMOST worked; it would find someone in Address Book, but it would be the first person in your Address Book list with that first name; not always the person you wanted.
The problem now is that when you click on a contact in 'Attendees' and select 'Open in Address Book', it simply opens the Address Book application and stops there; it does not go to the contact's data in Address Book. I sent Apple feedback on this problem 3 years ago, and again a few months ago, but it still does not work correctly. Does this work correctly for anyone?Mine actually performs the sync, but after a few rounds of syncing, some contacts get deleted, some get their photos removed, some get duplicated, and some get removed from groups. The sync basically puts my address book through a blender. I'm syncing both with MobileMe and Google. Well, that is I tried to. I've decided not to sync with Google since that's what seems to initiate the mess.
-
My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas? If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,, Thanks!
For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
For other Disk repair remedies see
http://support.apple.com/kb/TS1417
Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.) -
Open Hub does not work after upgrade
We just upgraded our BW production system from 3.0b into 3.5 and we are running support package level 09. Now we are facing serious problems with Open Hub.
After upgrade Open Hub delivering data from infocube into
csv-files does not work. When running the InfoSpoke it
will deliver 0 data records even though it should bring considerable amount of data.
There is no error message or short dump, it just do not deliver any data. InfoCube has data in place and it is available for reportoing. Extraction is made in FULL-mode and there is no transformations. Funny thing is that extraction from ODS or InfoObject works perfectly fine.
Has anyone idea how to solve this?
Thanks in advance,
JLWe ran into the same issue as Jari Laine today.
We just upgraded our BW sandbox environment from 3.0b into 3.5. We are running support package level 13, though. Now we are facing serious problems with Open Hub.
After the upgrade, our Open Hub which delivers data from an info cube into CSV-files does not work any more.
When running the Info Spoke it will deliver 0 data records even though it should bring a considerable amount of data.
There is no error message or short dump, it just does not deliver any data. The Info Cube has data in place and it is available for reporting.
The Extraction is made in FULL-mode and there are no transformations.
Has anyone an idea how to solve this?
Thanks in advance,
Marc
Maybe you are looking for
-
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
-
Hi All, I have a table with below structure & Data. {code} CREATE TABLE SAMPLE (PARENT VARCHAR2(100), CHANGE VARCHAR2(100), FLAG VARCHAR2(10), CHILD VARCHAR2(100)) {code} {code} insert into sample values('5762','7219','A','5965'); insert into samp
-
How to install Adobe CS6 Master Collection
How to install Adobe CS6 Master Collection to my computer because i buy the program and i don't know how to use and install the program
-
Where have the 'services menu' items gone? How can they be recovered/reinstated? Tried 'reset' ; tried restart -- still no 'services' (e.g. "email address", "open URL").
-
I have just recieved a Sony HVR-MRC1K for use with my Sony Z5 in the hope I could do away with endless capturing hours. I have a problem in the fact that when I import footage (DV in this case) from the unit using either the RU Util or from CF via Ha