Bex CriticalProgramError

Hi,
I get the error message, if I start Bex Analyser, there is only the error message box without staring excel.
Bexaddin
Fehler: CriticalProgramError
bei com.sap.bi.et.analyzer.addin.bexmenu.Create()
bei com.sap.bi.et.analyzer.addin.bexmenu.createBexMenu()
bei com.sap.bi.et.analyzer.addin.bexConnect.setExcel(Object iExcel)
I have reinstalled SAP Gui und Bex and Office 2007 (install Office first then sap tools), but nothing happens.
Please help - thanks a lot.
Environment:
Office 2007 SP2, bi710sp10p and gui710_14 installed

I had the same problem and I solve it from EXCEL Options
I chose from Add-Ins for MANAGE -> Excel Add-Ins and GO
I marked BexAnalyzer and I save the changes with OK.
I open the BexAnalyzer and it works.

Similar Messages

Fehler : Critical Program Error

Dear All,
We are facing this issue with couple of users from last 2 weeks.
It came suddenly on their machines
Error is :
Fehler : Critical Program Error
at com.sap.bi.et.analyzer.addin.BExMenu.Create ()
at com.sap.bi.et.analyzer.addin.BExMenu.CreateBExMenu ()
at com.sap.bi.et.analyzer.addin.BExConnect.SetExcel (Object Excel)
This comes when the users tries to access Bex Query and WB through analyzer.
1. We have reinstalled SAP but that is not helping.
2. We have given new laptops to users but that is also not helping for them.
3. There is NO new installation or Security patch added on their Laptop from past few days which might cause this error.
Please respond if you have any idea on this.
Regards,
Den

Hi,
Follow this thread,you might get answer.
Bex CriticalProgramError
Fehler: CriticalProgramError
@AK
Edited by: Ashok KUMAR on Mar 29, 2011 4:46 PM

BEx Analyzer 7.1 Issue after upgrade to MS Office 2007

Hi
We upgraded MS Office 2003 to 2007 and installed SAP GUI 7.10 (Patch 9). The OS is Windows XP (SP3).
We have also applied "BI AddOn Patch for GUI 7.10"
When we run BEx Analyser from Windows start menu or RRMX , we notice the error message: "A critical program error occurred. The program has to close. Please refer to the trace for further information".
Following is the trace details:
Trace Started as: 10/3/2008 11:25:26 AM*
ListSeparator: ,
ExcelVersion: 12.0
AddinVersion: 7100.2.700.1344
BExCompression.SupportsCompression: Compression NOT supported
Could not load file or assembly 'vjslib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
BExCheckFrontend.CheckFrontend: No Check performed (20081002) 0.156257
10/3/2008 11:28:36 AM----
System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticalProgramError ---> System.ArgumentException: The item with the specified name wasn't found.
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at com.sap.bi.et.analyzer.addin.BExChart.get_Chart(ChartDescription iChart, BExExcelItem iItem)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   at com.sap.bi.et.analyzer.addin.BExItemGrid.OnRender(Boolean iForceRendering)
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessParameterSubExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQuery(OSObjectInformation iObjectDescription, String iRRIVariableName, String iRRIVariableValue)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessOpenQuery()
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
CriticalProgramError
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
Regards
Madhu

Hi
This problem is solved.. We need to change the global settings in BEx Analyzer.. Following are the steps:
-     After executing RRMX, BEx Analyzer screen opens
-     Open Global Settings
-     Select u201CDefault Workbooku201D tab
-     Click u201CUse SAP Standardu201D
-     And then execute the query
Regards
Madhu

BEx Error - The specified value is out of range

Hi
We areBI 7.0 (SP14) & recently installed SAPGUI 7.10 (patch 7).
When I select a query (Path: Info Areas --> WMH Warehouse Management --
> Shipping KPIu2019s --> Order Turnaround in Detail) and give date range
greater than 2 weeks, then I can a critical error message and the BEx session closes.
Following is the trace file details:
ListSeparator: ,
ExcelVersion: 12.0
AddinVersion: 7100.1.400.1062
10/13/2008 10:16:12 PM----
System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticlaProgramError ---> System.ArgumentException: The specified value is out of range.
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateSet(Object o, Type& objType, String name, Object[] args, String[] paramnames, Boolean OptimisticSet, CallType UseCallType)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateSet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean OptimisticSet, Boolean RValueBase, CallType CallType)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateSetComplex(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean OptimisticSet, Boolean RValueBase)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.set_RangeAddress(String value)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.AdjustItemRange()
   at com.sap.bi.et.analyzer.addin.BExItemGrid.OnRender(Boolean iForceRendering)
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.set_Synchronize(Boolean iValue)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessParameterSubExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQuery(OSObjectInformation iObjectDescription, String iRRIVariableName, String iRRIVariableValue)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessOpenQuery()
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
CriticalProgramError
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
Thanks & Regards
Madhu

check if oyu can execute this query in RSRT, is so then you need to either go for SP > 16 or BEx Gui = 4 or 5 .,
Hope this helps

BEx of GUI 7.10 not working after MS Office upgrade to 2007

Hi
We upgraded MS Office 2003 to 2007. And installed GUI 7.10 (Patch 9).
When we run BEx Analyser from start menu or RRMX, we notice the error message: "A critical program error occured. The program has to close. Please refer to the trace for further information".
We have also applied "BI AddOn Patch for GUI 7.10"
Kindly help me with the solution.
Thanks & Regards
Madhu

Hi
I notice the following information in the trace file.. What does this say?? BEx problem, MIcrosoft ?
System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticalProgramError ---> System.ArgumentException: The item with the specified name wasn't found.
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at com.sap.bi.et.analyzer.addin.BExChart.get_Chart(ChartDescription iChart, BExExcelItem iItem)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   at com.sap.bi.et.analyzer.addin.BExItemGrid.OnRender(Boolean iForceRendering)
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessParameterSubExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQuery(OSObjectInformation iObjectDescription, String iRRIVariableName, String iRRIVariableValue)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessOpenQuery()
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
CriticalProgramError
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
Thanks & Regards
Madhu

Fehler: CriticalProgramError

Hi All,
While trying to open the Analyzer, I get the error message as below.
Bexaddin
Fehler: CriticalProgramError
bei com.sap.bi.et.analyzer.addin.bexmenu.Create()
bei com.sap.bi.et.analyzer.addin.bexmenu.createBexMenu()
bei com.sap.bi.et.analyzer.addin.bexConnect.setExcel(Object iExcel)
I have reinstalled SAP Gui und Bex and Office 2007 but nothing happens.
I am using GUI 720 and i have installed the latest Front end patch (bi720sp02p_201-20006596.exe) also from SAP site. I am using Vista and already have .NET frame work 3.5 SP1 installed.
Still i am facing the same issue.
you help will be much appreciated.

For quite awhile I've been using the create a new Windows User Profile under documents and settings which works but that is not good for the end user. They lose all their personalized Windows settings when you do that. Basically it is like logging onto the computer for the first time again. Not fun for the end user.
Today we also found that the BEx Analyzer Add-In was "disabled" within Excel. Following Enrique's instructions above fixed the problem and the user didn't have to lose all their personalization like creating a new Windows profile does!!!!!
I wish I would have known about this in early 2011 when we first came across this issue.

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Inconsistency between Bex and Back end

Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this:
ZField
000000000000000000008
It shows correct in DSO table but in Bex it only shows the zeros. do you know why and how to get this to show the whole field value?
Thanks.
By the way this is a characteristic and not keyfigure.

Hi Vekant,
If you have not did any speecific thing at query level then value should be shown correctly.
Please try this once and check.
Create new test query on your data target drag and droup your charecteristic.please execute your test query and see if you are able to see the correct value.
try this.
Regards,
Ganesh Bothe

Error while trying to Open and Delete a BEx Query in Query Designer.

Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
Chandu

Arun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu

Report performance while creating report on BEx

All all!
I am creating a report on BOE 4.0 on top of BEx connection as a source. I have developed reports on top of universe in the past and i know that if we keep calculations on reporting end it hampers the report performance. Is this the same case with BEx? if we are following the best practices is it ok to say that we should keep all heavy calculations/ aggregation on BEx or backend for better report performance.
Can you guys please provide your opinion based on your experiance and knowledge. Any feedbacks will help! Thanks.

Hi,
Definitely best-practice to delegate a maximum of CKF to the Cube where possilble, put RKF in the BEx query, and Filters too.
also, add Default Values to your Variables (this will speed up generation of the bics transient universe)
also, since Patch2.10, we are seeing some significant performance improvements reducing 'document initialization' and 'time to prompts' by up to 50% (step such as these often took 1.5 minutes, even on sized systems)
Also, make sure you have BW corrections like this implemented: 1593802 Performance optimization when loading query views
In the BusinessObjects landscape - especially with BI 4.0 - it's all about Sizing and Tuning . Here is your bible the 'sizing companion' guide : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000738725&_OBJECT=011000358700000307202011E
Pay particular attention to BICSChunkSize registry settings
Also, the -Xmx JVM Heap Size for the Adaptive Processing Server that is running the DSL_Bridge service.
Regards,
H

Bex-report issue

Hi
I created a query in Bex-Query Designer - 3.5.. Then publish that report in the Web by using Bex-Analyzer.
Suppose i have columns in the report like 'vendor' and 'PO Number'. When the cursor goes to 'vendor' column heading then im getting as "Context Menu for vendor" by default.
i dont want by default .. I want to make this by custome (like i want Vendor Analysis) . How can i get this
please let me know
kumar

Hi ravi
Yaa im asking same thing. When i put cursor on the 'vendor' or 'PO number' then im getting "Context Menu for vendor " or "Context Menu for PO Number" by default.
I dont want this one. I want custom one like "vendor Analysis" or "PO Analysis".
How can i get this one . pls let me knpw
i ll assing the points
kumar

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

Concatenation of Data from 4 infoobjects into a single cell in Bex Report

Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
****Points will be awarded***

Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
****Points will be awarded****
Regards,
Hitesh Shetty.

Variable screeen popup with button in bex

Hi ,
When I try to display variable screen using a button in bex, I get the following error. has anyone come across this. pls advise.
BExItemButton.RenderData01: Unable to get the Item property of the OLEObjects classErr: Unable to get the Item property of the OLEObjects class
Kartheek

Sounds front end related, are all your Front end patches (FEP) upto date. Might be worth downloading FEP 11.
Cheers,
Pom

Error while running query in BEx

Hi Experts,
when i am running a query i am getting this error in BEx: "Value 'First NameAPPROVER1' (hex. '004600690072007300740020004E0061006D00650041005000') of characteristic ZZNAME1 contains invalid characters,Error while reading data; navigation is possible
I>> Row: 121 Inc: EXECUTE Prog: CL_RSDRV_SRVS_SID).
Please suggest how to solve the error.
Regards,
AKSINGH

Thanks All,
Problem Solved

Bex CriticalProgramError

Similar Messages

Maybe you are looking for