Bex display

Hi All,
Can some one plz tell me a typical scenario when we require to have 2 structures in the column section in a query.
Thnaks ,
Tina

One more : when u wnat make use of 'cell definition', u should have two structures.
From SAP HELP:
You can define formulas and selection conditions explicitly for cells in queries with two structures. In this way you can override the cell values that are created implicitly from the intersection of the structure components. This function allows you to design much more detailed queries.
Define Cells... is only available for queries with two structures. For queries with only one structure, the symbol is deactivated.
If one or more exception cells have been defined for a query, this is shown by the symbol on the status bar of the Query Designer.
for more details:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a569ae09411d2acb90000e829fbfe/frameset.htm
regards
Message was edited by: c c

Similar Messages

Urgent Help plzzzzzzzzz Hierarchy in Bex displaying like Not Assigned Mater

Hi Experts,
plz solve my problem like displaying Hierarchy in Bex ,
I loaded hierarchy from R/3 system into Bw 0Mterial.
In Bex 0material Properties I Selected heirachy on Material , this heirarchy having 8 levels,
but in the out put it showing only one level displayng
like Not Assigned Material.
i did all the bex setting well, but i dnot know why i am getting this ...
plz any one help..
Thanks in advance
Anil

Hi Anil,
Your query is built on an infoprovider, right? The way the hierarchy is displayed depends on TRANSACTION DATA IN INFOPROVIDER. To display the hierarchy normally you need to have in the provider not blank values of the characteristics you used in the query and not blank material code. Unassigned node means that this requirement doesn't met.
If would be much more useful if you describe what you have in the query and what - in the provider.
Best regards,
Eugene

Removal of Compound attributes of an info object in the BEx display

Hi,
i have a Info object Parentid which is compounded with the Parent Source and a Date.
I have to remove the compounded attributes when I am displaying the info object Parentid in the BEx report.
What is the best way of doing this?
Any help is deeply appreciated
Regards

Hi Arvind,
put the compounding attributes into the filter section and make sure the ouput is restricted to only one compounding value.
regards
Siggi

BEx Displays Wrong Values After Reloading InfoCube

I am very new to all of this, so there is a good chance I have just done something stupid. I have an InfoCube in which I deleted all of the data, and then reloaded it with corrected data from the PSA. If I look at the raw data in the InfoCube, it looks fine. If I run a query with either BEx Analyzer or BEx Web Analyzer, key figure data is doubled, as are the result rows. I believe it has to do caching for that particular Query, because I can create a new one and it will display the data correctly. Does anyone have any ideas what might be causing this to happen? Or how to clear out the cache?
Thanks

Well, by the time I got back to look at it, it was working fine. Which told me it was related to caching. So I decided to recreate it. In order to do this, I cleared out the request from the InfoCube, and then went and modified a few rows in the PSA. After the DTP, I once again checked the Query and it was wrong. I first checked the Request IDs, and I only had the new one. I then went into RSRT and deleted just the cache for that query. After that, the query was working again! Thanks for your help.
Now my questions are how long does it take for the cache to recycle, and what actions can prompt it to recycle (such as changing the query)?

HIde BEX Display Header

Hi ,
Appreciate if anyone could help me with this.
Is there any way we can hide the Query results header (Free characteristic,rows).
I want to see only the results of query. I tried to refresh it in workbook and right click to delete the header but it doesnt permit. The bex interactive function only allow me to refresh or drill down.
I want to save this as workbook and whenever refresh the query, it should never display the header values.
Thank you.

Thanks a lot. i manage to have a reference excel sheet in workbook and populated the data.
appreciate all your help

BEx display in sigle line

Hi All,
I would like to display below scenarion in single line.
I have data in query like below.
Zone        Job         Completion time (deriving with formula in BEx)
Z1             J1                   20
Z1             J2                   16
Z1             J3                   11
Number fo Jobs with respect to Completion time is greater than 15 should display on Zone wise like below
Zone          (Greate than 15 Jobs)          Total job        (percentage of jobs greater than 15)
Z1                   2                                        3                         66.6 per (i.e 2/3)
I have written a formula on Completion time wih 0 and 1 (if greater than 15, result 1 one else 0)...
But my output is coming like below.
Zone          (Greate than 15 Jobs)          Total job        (percentage of jobs greater than 15)
Z1                   1                                           1                        100
Z1                   1                                           1                        100
Z1                   0                                           1                            0
But i need like below in single line. how to achive the same in the report.
Zone          (Greate than 15 Jobs)          Total job        (percentage of jobs greater than 15)
Z1                   2                                        3                         66.6 per (i.e 2/3)
Thanks in advance
Regards,
Raj

Hi Raj,
1) Drag 'Zone' in your Rows
2) Under Columns, create CKF1. Include formula as (Completion Time > 15) * 1. Under Aggregation tab, select Exception Aggregation as 'Total'. Select 'Job' as your Ref. Characteristic.
3) Under Columns, create CKF2. Include formula as (Completion Time < = 15) * 1. Under Aggregation tab, select Exception Aggregation as 'Total'. Select 'Job' as your Ref. Characteristic. Keep the Display as 'Always Hide'.
4) Under Columns, create CKF3. Include formula as CKF1 + CKF2
5) Under Columns, create CKF4. Include formula as CKF1 / CKF3 * 100
Plz. validate if your O/P is in the form
Z1 2 3 66.6
--Priya

BEX Display Question

We have a key figure(key figure 1) that has different Sales Unit of Measurements - BOX, Pallet Pieces, another key figure(key figure 2) with one Unit of Measure PC. We are trying to display like this:
BOX PAL PC         PC
Key Figure 1          Key Figure 2
However we are getting
BOX PAL PC         BOX PAL PC
Key Figure 1          Key Figure 2
even though we restrict key figure 2 with PC only
our Columns area in Bex is
Structure
Key Figure 1
Key Figure 2
Sales Unit
Is this possible - I have tried a lot of different combinations with nothing working. Any help is appreciated.

You can try...
Create a formula variable (ZZVAR) with the correct units (PC) with default value 1, optional, not ready for input.
For KF 2, instead use a formula where you add NODIM(KF2)*ZZVAR

BEx display Chinese Incorrect

Hi, All:
The system is BI 7.0 and we use Query Designer to display our query.
To display in table in Chinese, everything is ok. But to display in Chart, such as Bar Chart, the characters in the Chart can't be display correctly, howerver those outside the Chart, such as title, can be display correctly in Chinese.
Any info will be highly appreciated!
Best wishes,
David

Additionally, the system is non-unicode and the <b>gfwchart</b> file current is:
[LANGUAGES]
BG=Arial Unicode MS
CS=Arial Unicode MS
DA=Arial Unicode MS
DE=Arial Unicode MS
EL=Arial Unicode MS
EN=Arial Unicode MS
ES=Arial Unicode MS
FI=Arial Unicode MS
FR=Arial Unicode MS
HE=Arial Unicode MS
HR=Arial Unicode MS
HU=Arial Unicode MS
IT=Arial Unicode MS
JA=Arial Unicode MS
KO=Arial Unicode MS
MS=Arial Unicode MS
NL=Arial Unicode MS
NO=Arial Unicode MS
PL=Arial Unicode MS
PT=Arial Unicode MS
RO=Arial Unicode MS
RU=Arial Unicode MS
SK=Arial Unicode MS
SL=Arial Unicode MS
SV=Arial Unicode MS
TH=Arial Unicode MS
TR=Arial Unicode MS
UK=Arial Unicode MS
ZF=Arial Unicode MS
ZH=Arial Unicode MS
Z1=Arial Unicode MS
ET=Arial Unicode MS
LT=Arial Unicode MS
LV=Arial Unicode MS
AR=Arial Unicode MS
[FONTPATHS]
[GENERAL]
TRACE=0

BEx - Display current year and previous year by day on the same row

Hello experts, need some help/suggestions on how I can accomplish the following please.
We have a requirement to show MTD revenue by day for the current year and previous year. The desired result will have the following columns
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2009       |      15,131,005                    |        15,138,668
11/02/2009         |    15,055,345    |                        15,523,762
However, the result is showing up as follows:
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2008       | |                                                   15,138,668
11/02/2008       | |                                                   15,523,762
11/01/2009       |      15,131,005 |
11/02/2009       |      15,055,345 |
The number of rows for Calendar Day varies depending on the date the user selects. We only want to display the days for the current year with the Previous Year Column on the same row.
Can someone please let me know how I can get the results to display on one line for each day?
Thanks,
David

I have the same issue on my end, and am interested in responses. I searched the forum and found this suggestion in another post; not sure if this solution will help, but it looks like it might. This was a response from poster RadhaN:
RadhaN
Posts: 390
Registered: 8/27/09
Forum Points: 876
   Re: a simple query to show sales versus last year on daily basis/
Posted: Sep 21, 2009 9:53 AM    in response to: Shlomi Weiss           Reply
HI Shlomi
Create a virtual characteristic in your infoprovider that can calculate the day from calendar Day. In ZXRSRZZZ while adding code for this virtual characteristic use the function module DATE_COMPUTE_DAY to compute the day for every calendar day.
For calculating Sales Current year, create a restricted ky figure with Sales as the key figure. Add 0CalDay to this RKF and create a variable for this infoobject(Eg: ZCURYEAR) that will receive input from the user for the range of dates eg: 08/16/2009 - 08/22/2009.
For Sales Prior year, create another restricted key figure with Sales. Add 0CalDay to this RKF and add a customer exit variable. In the Customer exit code use the ZCURYEAR variable and offset it to prior year in both the upper and lower limits. This should work.
I hope this helps.
Thanks.

Display Title in BEX query for Master Data Field

Hi All,
Appreciate if someone can assist me in this.
When we display query result, we will have results of master data field for as master data and Text, e.g Customer and customer text.
BEX display:
Header Line : Customer
Display Line : 90002011 Mary Kay
90002023 John Smith
For the header Line, we have title 'customer', can we have the title for 'Customer Description' instead of having it as a blank field.
Appreciate if someone can assist me in this, I cant find this issue posted by anyone.
Thank you.

Hi,
For one object you can not have seperate description for key and text.
Either you need to have seperate object. Check if your Customer object is having some name attribute then display cutomer key with name attribute so that there will be two object and you may change the description in report display.
If this is not possible then you may not have dirctly in reporting. You need to stage one more object in staging area with same cutomer field then one you may use as text the other one as key.
I hope it will help.
Thanks,
S

Chinese can't display correctly

Hi,
i am encountering a strange problem.
I am trying to run a jsp on OC4J 10.1.3.3 StandAlone and struts-1.3.9
I'm setting up Chinese in ApplicationResources_zh.properties.But when I use in test.jsp. Web page display is to acquiesce in language "Western Europe (ISO)",I must right strikes choosing "simplified Chinese".
And then I add <meta http-equiv="Content-Type" content="text/html; charset=GBK"> to the page. Web page display change to acquiesce in language " simplified Chinese ".But the Chinese display has become the messy code.
Test.jsp
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
<html:html>
<head>
<html:base/>
<title><bean:message key="index.title"/></title>
</head>
<body bgcolor="white">
Hello World
</body>
</html:html>
Any help on sorting this out is welcome.
Regards

Hi gavin
Check this threads
/message/3043884#3043884 [original link is broken]
chinese font display in chart grachic error
BEx display Chinese Incorrect
Chinese Chracter doesn't display
Regards
William Neira

BEx variables: Date is outside Factory Calendar Image

Good day
A user received the following message when selecting the inpiut help for a date variable for a CRM query:
" Date is outside Factory Calendar Image"
I have checked tcode SCAL and noticed that the factory calendar for South Africa = 1996 to 2010. I checked the CRM source and their factory calendar is the same. In the mean time I have transferred the global settings for SAP DNI (parts) into BW and the factory calendar setting for South Africa now shows 1996 to 2015.
Problem is that the CRM query still shows the same error message.
Question:
1) Should factory calendar settings for all SAP sources (Modules i.e. CRM...) be imported into BW, or is there another setting that I must check?
Thanks in advance.
Cj

This is what I have done:
Whe have the following R/3 modules (source systems in BW)
SAP DNI
SAP dFM
SAP CRM
SAP SRM
etc.
(Tcode = SCAL, selected 'factory calendar', selected 'rebuild tables')
Firstly I have transferred the global settings for SAP CRM (as the BEX query is from CRM). Their factory date was 2012. This did not solve the problem.
secondly, I did SAP DNI, their factory date = 2015, this also did not solve the problem.
I then transferred the global settings for SAP dFM, our main reporting module, their factory date = 2020. The problem was solved.
Seems as if only ONE of the modules depicts the factory calendar date for BEX.
I have rested this again and only SAP dFM global settings rectified the BEx display problem.
Hope this helps?

How to disconnect a web BEx session encapsulated into a BSP ?

Hello,
I have built a statefull BSP application aimed at displaying BW queries results.
This BSP is composed of many frames. Into one frame, I have to display a web BEx session (like the BEx displays query results through an internet browser).
Into this frame, the following type of URL is called :
http://server:port/sap/bw/BEx?sap-language=EN?cmd=ldoc?infocube=<my info cube name>?query=<my query name>?<variables handling ...>
It works. From a user session point of view, I have 2 'Plugin HTTP' sessions for the user :
- one for my BSP
- one for this Web BEx session
When I leave my BSP (by closing the browser for instance), my BSP session is well ended (thanks to session.htm and session_default.htm) but not my Web BEx session.
My objective is to end this Web BEx session
- either when I trigger an action changing the frame content
- or when I leave my BSP application
I have already thought about switching to stateless mode the call to the Web BEx. But I consequently loose my data when I navigate through the tabstrips from Web BEx window.
How could I do to end properly the statefull Web BEx session in any case ?
Thank you very much for your help.
Regards.
Fabrice

Hi Fabrice,
I am developing an Bsp application with multiple Frames for BW LIKE YOUR'S, of which the BW developers can up date the results table weekly/monthly & the End users can view the results through web. I appreciate, if u mail me some suggestions regarding my following queries.
1.The internal table of results table could be created/inserted in BSP or in BW ODS/INFOCUBE ?? Or incase of this how to do it ?? How to connect that ODS/ODS Table with BSP Pages??
2.PLS Mail me how to publish through web Bex query as I am not trained in this aspect??
I really appreciate your cooperation, as My BSP Application is similar to your application,as you have better Idea of same concept and pls mail me some sample code.
Kind regards,
CSM REDDY

Hierarchy selection variable display as key

I have created a variable to allow users to choose a functional location (0FUNCT_LOC) hierarchy in a 7.0 WEB report. This is so users can select between two hierachies from different source systems. The hierarchies have different keys (as a result of renaming in the InfoPackage) but the same text descriptions.
In the variable selection screen the hierarchy is displayed in the format Text + Key, however because of the width of the selection drop down box only the text is visible. As the text for both hierarchies is the same (HIER.TECH.LOC) users can not easily see which hierarchy they need to select.
Is it possible to change the display so that only the Key is displayed in the varaible selection drop down box (N.B. we need the report to display Key + Text and so this has what has been set as the BEx display default for the InfoObject)?
Alternativley is it possible to widen the width of the selection drop down box in the WEB varaible selection screen so that the Text + Key will both be visible?
Thanks

Nice question buddy.
I am also looking for the same, couldnt get anything yet.
Regards,
Den

Display data per CALWEEK over two years

Good afternoon (in South Africa anyway)
We are still in 3.10 (BI 330)
Please assist. I created a Variable offset 0 to -12 on 0CWEEK. If I run the query, only data for CALWEEK's for 2008 are displayed. I restricted 0CALYEAR to both 2007 and 2008, but it did not change anything. How do I display the last 12 weeks (or in other cases 'Monhts') if the years refer to 2007 and 2008?
Your assistance will be highly appreciated. Have a good day.
Cj Faurie

Hi There
Thanks for your speedy response. Yes what you say is true.. regarding the fact that 200812 (CALWEEK) will only display info for 2008. But what confuses me is that the following is true:
(Filter area of query displays the following)
'Calendar Year/Week 2007/52..2008/12'
(Query Result Area displays)
'Calendar Year/Week
2008/01
2008/05
2008/09'
Why does Bex display "2007/52 ..... " in stead of 2008/01 when the variable entry is from 2008/12 and the offset 0 to -12?
Thanks
Cj Faurie

Bex display

Similar Messages

Maybe you are looking for