Bex dont show data from one infocube

I have a query created on a multiprovider that initially contain four infocubes and after I add the Infocube B to this multiprovider.
Now, I can see records in the infocube B, but I can not see this data using the query.
The multiprovider is active and the query filters and free characteristics are ok.
What is happened?
Thank you in advance!

Hi,
Did you make necessary changes in the Identificatoin and selection tabs of the multiprovider. Also check to see if there is any restriction by InfoProvider in your query.
Hope this helps...

Similar Messages

How to show data from one web site to other web site having diffrent domain.

Dear all,
i want to show the selected data from one web site to other web site.
the location of the two web site is geographically seprated (and diffrent domain)
Please tel me in how many ways it can be accomplished.
If it can be done using jquery then please tel me the function or procedure to do it.
Note: ( i have seen the above behavior in many web sites .
like, i was purchasing some thing but finally declined,
after that i visited some other web sites to gets some other data on other area
, and i show my selected items of the first web site on second website as advertisement.)
i would like to know how these things are accomplished and how it can be done in asp.net.
yours sincerely

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to load data from one Infocube to another request by request using DTP

Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
Ravi

You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set.

Real data from 2 infocubes in one planning layout

Hello experts,
Can someone tell me if there is a way to show in one planning layout the real data coming from two InfoCubes.
I think it is not possible but can you confirm me this idea?
Best regards,
João Arvanas.

Hi,
Thanks in advance for your help.
My problem is exactly with the restriction of every column to a single planning area.
I want to include in a column values from 2 planning areas at the same time, because the values complement themselves. The key-figure for both InfoCubes is the same.
If this cant be done the only solution I see is in the extraction to BW transfer the entire data to one InfoCube.
Best regards,
João Arvanas.

Fetching data from one BI server to another

Hi All,
We have BCS environment on top of BI. We have a request from Client to refresh the BCS data in our quality box (copy of BCS production data). Data wasn't refreshed to our Quality system regularly from SAP Quality and hence we thought of complete BI Production copy to our Quality box.
Since the above strategy is time consuming,we have been contemplating on other options and have stumbled upon SAP blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21489. [original link is broken] [original link is broken] [original link is broken]
The blog talks about pulling data from one BI server to another. As BCS is such a fragile environment, wanted to take an opinion on whether you all see any concerns with the approach.
Regards,
Vivek Das Gupta

Hi,
W have done the system copy from production to QA system and only faced authorization issues and also we follwed the same blog and as mentioned in the blog dont forget below points before going ahead for the system copy.
switch the source Real Time Infocube (in MBP) if you want to copy all latest productive data, that is to say including those which were contained in the open request.
For data consistency reasons and to avoid any risk of error, the loading process is executed in Full.
If you planning to copy only a part of the source data records, set filters in the infopackages.
Hope it going help you
Thanks

How to move BCS data from one box to other

Hello Expert,
Dose any one know how to move BCS data from one box to other box ?
Thanks & Regards,

1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
2) As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

Migrate Closed Sales Data from one SAP system to Other

Hi,
We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
Please share your thoughts on the considerations / DOs and Donts for such cases.
Appreciate your response.
Kind Regards,
Tanuji

Hi,
If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
Following are the considerations:
1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
2) You might want to have a reference no somewhere in the new transactions from the previous system.
3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
Regards,
Raghu.

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Move data from one cube to another cube

Hi,
I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
Regards,
Tyson

Dear tyson m ,
check with any update rules in ur transfer.If so check in it.
Just go through these methods for making transfer from one cube to another cube fully without missing data.
Update rules method
if it's updated from ods, you can create update rules for cube2 and update from ods
or you can try datamart scenario
cube1 right click 'generate export datasource'
create update rules for cube2, assign with cube1
rsa1->source system->bw myself, right click 'replicate datasource'
rsa1-> infosource -> search 8cube1 name
(if not get, try right click root note 'infosource'->insert lost node(s)
from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
Copy from
While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
Another option is:
The steps for copying the contents of one cube to another:
1. Go to Manage -> Recontruct of the new cube.
2. Select the "selection button"(red , yellow, blue diamond button).
3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
4.Execute and the new cube would be loaded.
Its all that easy!!!!!!
Refer this link:
Copying the structure of an Infocube
Reward if helpful,
Regards
Bala

How can you transfer data from one ipod to another ?

How can you transfer data from one ipod to another ipod ?

The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device." Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

Transfer data from one Iphone to another I phone

how can Itransfer data from one I phone to another?

I looked at the support document before I told you. The support document is dated September 18, 2013. It shows how to transfer from iCloud for devices with iOS 5 or later, and then says this is you want to use iTunes.
"Follow these steps if one or both your devices use a version of iOS earlier than iOS 5 or if you don't have an iCloud account."
That is if you click on the part about iTunes. Check the document again.

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Need to split data from one row into a new row redux

Hi folks,
I asked this question about eight months ago (see thread https://discussions.apple.com/message/23961353#23961353) and got an excellent response from forum regular Wayne Contello. However, I need to perform this operation again and when I attempted it recently, I am now greeted with a yellow warning triangle. Clicking it shows "This formula can’t reference its own cell, or depend on another formula that references this cell."
What I'm trying to do is the following:
I have an excel file that keeps track of members of a social group. The file places each member "unit" on a single row. The unit can be a single person or a couple. Columns are labeled "First1" "Last1" "Hometown1" "B-day1" while the second member of the unit is identified in columns like "First2" "Last2" etc.
What I'd like to do is duplicate those rows with two people (which I'll do by hand) but have a way of deleting the "xxxx2" data from one row and the "xxxx1" data from the duplicate row.
Wayne's illustrated solution was to create a blank sheet and enter the following formula in cell A2:
=OFFSET(Input Data::$A$2, INT((ROW()−2)÷2), COLUMN()−1+IF(MOD(ROW()−2, 2)=0, 0, 4)), which apparently worked fine for me last year but now is sending up an error flag. When I look at the formula, there is no clue except that which I quoted above.
Can anyone (or hopefully Wayne) take a second look at this and help me out? I can't imagine that it's a problem with using the newer version of Numbers, but who knows? I'm using version 3.2 (1861), which is the "new" Numbers.
Any help would really be appreciated.
Thanks!
-Tod

Hi Tod,
The error message "This formula can’t reference its own cell, or depend on another formula that references this cell." may be because your table may be different from the one you were using for Wayne's solution. Numbers has Header Rows, Footer Rows and Header Columns. Such Headers in tables exclude themselves from formulas. Excel does not recognise them as headers. What table are you using now?
A screen shot of (the top left portion of) your table or a description of what you see under Menu > Table will help.
Regards,
Ian.

Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

Bex dont show data from one infocube

Similar Messages

Maybe you are looking for