BEx Error: Cannot find workbook on server

Hi,
In the BI Production system, I am getting the following error "Cannot find workbook on server" when I try to create and save a new workbook. BI Development seems to be working fine. Could you tell me why this is happening, and how I can fix this?
Thanks
Edited by: Davy Dave on Nov 4, 2008 1:54 AM

Hi Dave
Can you share how you solved this problem?
Brgs, Martin

Similar Messages

Cannot find the installer"server/Linux 64/DisK.. Erron on Informatica 8.6.1

Hi Friends,
I am trying to install Power Centre Informatica 8.6.1 (64 bit) on RHEL 5.4 (64 bit) and while invoking the installer i am getting the following error:
cannot find the installer "server/Linux 64/Disk1/Instdata/VM/install.bin
Please let me know the fix.
Regards,
DB

Hi,
This is the data mining forum so we don't have anything to offer for Informatica installation issues.
I am not sure what forum to recommend given Informatica is not an Oracle product.
You could try the data base general forum:
General Database Discussions
Thanks, Mark

Error: Cannot connect to fulfillment server. Error: cannot find loan record.

Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.

Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support

Cannot find the CMS server running on port 6400?

Hi all,
I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message
"Cannot find the CMS server running on port 6400?"
Can anyone explain me how to recitify this issue ?
Thanks
Pooja

On the CMS server launch the CCM and then the CMS is likely red (not started) try to manually start it, if it fails check windows event viewer for errors to see why it failed. Could be the service account (try local system if not specified already).
Regards,
Tim

Installation Error, Cannot find "CrossRef"

I am trying to install Lync 2013 on a new server and I'm having an issue while preparing Forest, this is the error I am getting.
> Prepare Forest
Enable-CSAdForest -GroupDomain dc.emtecsu.com -Verbose -Confirm:$false -Report "C:\Users\......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html"
Creating new log file "C:\Users\.......\AppData\Local\Temp\Enable-CSAdForest-9033ab00-1f99-4ea1-b23d-0ce8218c6c24.xml".
Enable the Active Directory forest to host Lync Server 2013 deployments.
Creating new log file "C:\Users\......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html".
WARNING: Enable-CSAdForest failed.
WARNING: Detailed results can be found at "C:\Users\.......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html".
Command execution failed: Cannot find the object "CrossRef" in Active Directory.

Have you looked at the note on Enable-CSAdForest?
"If you receive the following error, “Cannot find the object ‘CrossRef’ in Active Directory” while running
tasks to prepare a child domain of a single-forest environment with multiple domains, you may have to manually add the RTCComponentUniversalServices group from the parent domain to the Windows Authorization Access group in the child domain." - http://technet.microsoft.com/en-us/library/gg412764.aspx
Also look at a similar thread: http://social.technet.microsoft.com/forums/lync/en-US/868714f4-26f6-4c19-86ff-cc69935b0153/cannot-find-the-object-crossref-in-active-directory
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Logon balancing error:cannot connect to message server (rc=9)

Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
Vikram

Check OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
    Error: service 'sap...' unknown
    Component NI (network interface), ...
    rc = -3, module ninti.c, line 463
    Detail NiPGetServByName: service 'sap...' not found
    System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
      %SystemRoot%\system32\drivers\etc
is not translated to
   c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

GRC CUP 5.3 Error: "Cannot find or initialize JSP Instance"

Hello,
Currently we are facing the below issue in GRC 5.3 CUP:
When attempting to u201CChange a u201CCustom Approver Determinatoru201D in (GI0 Development) u2013 Configuration and we received the following error:
Path: CUP-> Configuration -> Workflow-> Custom Approver Determinator'
Error: 500 Internal Server Error: "Cannot find or initialize JSP Instance"
Details of error: 'No details available'
Any thoughts/inputs on the issues outlined would be appreciated.
Thank you
Regards
Sridhar

which SP you are on ?

Cannot find NT Oracle Server DLL OCI.DLL

Hello
I am getting the following error when trying to execute a DS job from Designer in the error log.
"Cannot find NT Oracle Server DLL <OCI.DLL>. Please make sure that Oracle has been installed and the PATH variable points to the correct lib directories."
1. DS is on Windows
2. DS repo is sql server
3. Source is Oracle 10g db, target is Sql server db.
4. Oracle 32 bit full client is installed on the job server (10.2.0.1.0)
5. I have checked the SAP note 1295918 and I think it does not apply to the version of Oracle client we have and also it is already working in our SANDBOX environment, also our install location is NOT under the c:\program files\ folder
We are seeing this error only in our DEV DS box, we have a similar setup in the SANDBOX DS and that job executes successfully. I have compared the oracle client, DS and job server configurations between the 2 boxes and they are the same.
- SQLPLUS connection works from both the servers
- I am able to connect to the database and look at all the tables within DS designer from both the servers and import them into the DS repo
- No ORACLE_HOME was set when the installation was done. I created a ORACLE_HOME variable and assigned the install location, but still getting the same error
Any help is appreciated
Thanks
Dinesh

Dinesh,
When you added ORACLE_HOME to the environment, the environment settings were updated for the OS. However, the job server still had the old settings in memory. That is why you needed to restart the job server before DS would recognize ORACLE_HOME.

Cannot find NT oracle server DLL oci.dll (BODI 1112172)

Guys,
I am trying to install Data Services 4.1 client tools and I get the error message Cannot find NT oracle server DLL oci.dll (BODI 1112172). I checked the "Path" variable in the system parameter and it contains the folder that has the oci.dll file. Does anyone have ideas on this?
Thanks,
Doniv

So Here is the screenshot of the exact error I am facing. I am able to log in to the DS client tools using Windows AD and able to see the list of repos on the server. However, when I select any of the repos I get the error message below.
The "Path" roles in the evironment variable as seen in the screenshot below has the folder that contains oci.dll file.
Help is greatly appreciated.

Jabber is unable to register through expressway (Error:Cannot communicate with the server)

Hello Experts !
I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
Attached is the file .
(Error:Cannot communicate with the server)
Regards;
KV

Ok, let's clarify, what u have (correct me, where I am wrong):
1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
3. Both domains (inside/outisde) are created on E/C and properly configured;
4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
Regards,
Kirill

Xmlreader schema validation error: Cannot find the declaration of element

I have multiple schemas with namespaces but I would like to validate an xml document without namespaces. The schemas all have elementFormDefault="unqualified" in the root element.
I am encountering error below in my validation using xmlreader:
ERROR:
Cannot find the declaration of element 'NewTradenetDeclaration'.
my code is:
xmlReader = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
xmlReader.setFeature(VALIDATION_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_VALIDATION_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_FULL_CHECKING_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_NAMESPACE_FEATURE_ID, true);
xmlReader.setProperty(JAXP_SCHEMA_LANGUAGE, XMLConstants.W3C_XML_SCHEMA_NS_URI);
String schemaURI = "NewTradenetDeclaration.xsd";
// ive tried all of the ff but throws the same error
//xmlReader.setProperty(EXTERNAL_SCHEMA_LOCATION, "urn:crimsonlogic:tn:schema:xsd:NewTradenetDeclaration NewTradenetDeclaration.xsd");
//xmlReader.setProperty(EXTERNAL_SCHEMA_LOCATION, schemaURI);
xmlReader.setProperty(JAXP_SCHEMA_SOURCE, schemaURI);
// set entity resolver to resolve xsd locations
MyResolver resolver = new MyResolver();
xmlReader.setEntityResolver(resolver);the entity resolver has:
public InputSource resolveEntity (String publicId, String systemId) {
String filename = "c:/workspace/TXParser/schema/"+ systemId.substring(systemId.lastIndexOf("/")+1);
File f = new File(filename);
InputSource source = null;
try {
source = new InputSource(new FileReader(f));
} catch(Exception e) {
System.out.println("InputSource exception: " + e.getMessage());
return source;
}Help please. Thanks.

I fight with the same error, it is curious that the schema from schemaLocation can not be validated. If i set the schema manually through an attribute it works. What i try to do is overwriting the resolveEntity in the handler to get the schema from another location and validate the xml against the schema specified in the attribute schemaLocation rather than setting it manually :-(

Installation error: Cannot find a J2SE SDK installed at path C:\Program Fi

I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
C:\Program Files\Java\jre1.5.0_10
I am installing the version I downloaded for Windows systems with JDK1.5.
I have tried on two different machines.
Any ideas?

This is going to seem loooong, but comprehensive.
I'd initially always suggest using the bundled
package, since that's supposed to be a tested and
proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
After having problems with a graphics card for
example, installing the latest JDK might be
indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
It's also easy for users who don't know which Java
version to download, or even where to find it! You
guys have proven that: although it's stated you need
.First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
"JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
And given users might have several versions running
on the same machine (I have half a dozen), sqldev
could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
As for being bulky, even without the bundled JDK, it
still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
- Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
- Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
(The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
You say you don't have to bring over the VB runtime
for each app? I remember in the 90's doing it all the
time. Of course, being MS, now that's not necessary
anymore, since it's "magical" Windows. I don't have
any machine from Sun, but for sure they've got Java
bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
Again, I find the most logical difference between JRE
and JDK being the debugger. As you say it yourself:
JRE for end-users, who don't need to do any
debugging.
Now, sqldev is not just a table browser, but also for
debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
Nevertheless, as said in the other thread, if the
team discloses how to circumvent the SDK check at
startup, you can go ahead and use the JRE. In any
case, you'd have to agree that won't work as
out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

Configure: error: Cannot find php-config

After security update 2008-002 for Leopard, the PHP module builder stops, because the PHP version running on the machine doesn't match the header files from the PHP-developer part. More info see: http://www.naquah.net/blog/dennis/2008/03/20/how-to-get-eaccelerator-working-aga in-after-installing-security-update-2008-0#comment-50
After editing /usr/bin/php-config
Change
version="5.2.4" to version="5.2.5" and
vernum="50204" to vernum="50205"
and /usr/include/php/main/php_version.h
Change
#define PHPRELEASEVERSION 4 to #define PHPRELEASEVERSION 5
#define PHP_VERSION "5.2.4" to #define PHP_VERSION "5.2.5" and
#define PHPVERSIONID 50204 to #define PHPVERSIONID 50205
the ./configure command stops with a:
configure: error: Cannot find php-config. Please use --with-php-config=PATH
even when explicitly specifying the php-config location, the ./configure --with-php-config=/usr/bin/php-config command still throws an identical error.
The file is there, accessible and not empty:
$ ls -l /usr/bin/php-config
-r-xr-xr-x 1 root wheel 3031 22 mrt 21:44 /usr/bin/php-config
$ head /usr/bin/php-config
#! /bin/sh
SED="/usr/bin/sed"
prefix="/usr"
exec_prefix="${prefix}"
version="5.2.5"
vernum="50205"
include_dir="${prefix}/include/php"
includes="-I$include_dir -I$include_dir/main -I$include_dir/TSRM -I$include_dir/Zend -I$include_dir/ext -I$include_dir/ext/date/lib"
ldflags=" -L/usr/lib/mysql"
Re installing Xcode 3.0 didn't solve the problem.
What could be done to repair the (php) configure command, to allow me to build php modules again?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

I would like to upgrade my firefox but when I do it cannot find the proxy server

When I try to up grade to the new firefox 5.o from the 3.5 I currently have it cannot find my proxy server and I do not know how to fix this

In current Firefox versions the default connection settings are set to "Use the system proxy settings".
You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]
* [[Server not found]]

BEx Error: Cannot find workbook on server

Similar Messages

Maybe you are looking for