BEx error (CL_RSR_REQUEST and GET_KID)

Hello Experts,
SAP GUI 710.
While working with work books and changing properties of drilled down characteristics, I am getting following error :
Message:
An error occurred while communicating with BI Server.
As a result of this error, the system has been disconnected form BI server.
Program error in class SAPMSSY1 method UNCAUGTH_EXCEPTION
System error in program CL_RSR_REQUEST and form GET_KID.
Please help.
Thanks,
Lisa

Hi Lisa,
Did you guys recently upgraded from 3.5 to 7.0?
Is this workbook created in 3.5?
I would suggest saving this workbook again with a different name and execute. It should solve your problem.
Let me know.
Thanks
Majeed

Similar Messages

Error CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE

Hi Experts,
Iam working on 3.1 system, When i tried to execute a Query. I got the following error.
<b>CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE</b>
should i apply any SAP notes for this?
How to correct this? any ideas.
Thanks
SP

Apply OSS Notes: 885886 and 858458

Bex error- CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02

Hi gurus,
I have been getting strange error after i enter selection parameter in query & execute -
ERROR message Abort system error in program-CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02
the query was changed related to some hierarchies/account changes related changes but it works fine in development box and gives an issue in pre prod system after transporting.
We did tried to regenerate report in RSRT but no luck...also retransported it again ..And when we try to run report in RSRT - after entering selection it open ABAP debugger screen.
Can you advice what can be issue as some other reports based on same multicube runs fine without any issues.
Hence please advice on this.
thanks
Nilesh

Hi Nilesh,
Some basic steps you can follow are as below.
1. Use Generate Report option from RSRT tcode. This will either resolve the issue or give you a better description of the error.
2. Test all the included objects in RSRV. This will let you know if there is any issue with the inforproviders or the data.
3. Check if all the master data is fine.
4. Is the report giving problem only to your ID or your system? try checking on other systems and ask you collegues to try with their ID.
5. Check the patch level or any notes that are applied to your Dev system that are not available for your other system.
6. Retransport all the objects in the Query. (structures of the multiproviders and their respective Cubes) as this is pre prod system I guess you can drop data and reload from underlying DSO/data providers.
7. check if there were any warnings displayed when you transported the Query or any other object that is involved in the query.
8. Check if you have any customer exit code in your query. any code that needs to be executed before selection screen is displayed (as you say the error comes before displaying the selection screen). Check if CMOD code was moved to pre-prod.
Please let me know if any of this worked in your case.
Hope this helps.
-Swati.

BEX error (HP CP1025nw)

Hi, The printer icon in the system tray HP1025nw BEX error message and it does not work. (The system I use windows 7-32-bit.)
Can you help?

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

BEX Error, Explorer.exe has caused a problem and needs to close

Whenever, i click on My Computer on my laptop it opens up fine , but after closing My Computer, i get the message "Windows Explorer has stopped working" and it asks me to try to fix the issue by searching online.
When i click on the details i get the below message :
Problem Event Name: BEX
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d6727a7
Fault Module Name: bho.dll_unloaded
I am using Windows 7 Pro, SP1. I have scanned my computer using latest McAfee and it couldn't find any virus. Also, i tried booting from Win 7 DVD and tried doing a repair, but still the same issue.
This started 2 days back suddenly . I am able to browse and do other things, this issue occurs only when i click on My Computer from my Desktop or go to Start-->Computer, either of the two. Can anyone tell me how to fix this issue?
Pallab Chakraborty

From the link below:
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_programs/problem-event-name-bex-error-message/cf5baf73-0877-4070-abfb-a2c3a17a9e10
right click on my computer
go to properties
click on advanced system settings
under performance, click settings
click the Data Execution Prevention tab, and then click Turn on DEP for all programs and services except those I select.
click Add, browse to the executable file for the program and add it.
In your case you would add explorer.exe.
Steve W. MCSA,CCNA,MCP,A+,SEC+,CIW

System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated

hi Arun,
sap oss note 858458 may relevant for you, take a look, may need support package.
Symptom
When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
Reason and Prerequisites
This is caused by a program error.
Solution
BW 3.0B
           Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

BEx Error - The specified value is out of range

Hi
We areBI 7.0 (SP14) & recently installed SAPGUI 7.10 (patch 7).
When I select a query (Path: Info Areas --> WMH Warehouse Management --
> Shipping KPIu2019s --> Order Turnaround in Detail) and give date range
greater than 2 weeks, then I can a critical error message and the BEx session closes.
Following is the trace file details:
ListSeparator: ,
ExcelVersion: 12.0
AddinVersion: 7100.1.400.1062
10/13/2008 10:16:12 PM----
System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticlaProgramError ---> System.ArgumentException: The specified value is out of range.
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateSet(Object o, Type& objType, String name, Object[] args, String[] paramnames, Boolean OptimisticSet, CallType UseCallType)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateSet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean OptimisticSet, Boolean RValueBase, CallType CallType)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateSetComplex(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean OptimisticSet, Boolean RValueBase)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.set_RangeAddress(String value)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.AdjustItemRange()
   at com.sap.bi.et.analyzer.addin.BExItemGrid.OnRender(Boolean iForceRendering)
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.set_Synchronize(Boolean iValue)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessParameterSubExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQuery(OSObjectInformation iObjectDescription, String iRRIVariableName, String iRRIVariableValue)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessOpenQuery()
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
CriticalProgramError
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
Thanks & Regards
Madhu

check if oyu can execute this query in RSRT, is so then you need to either go for SP > 16 or BEx Gui = 4 or 5 .,
Hope this helps

Bex error SAPSQL_FIELDLIST_SUM_TYPE

When I run the query I get this error message in the Bex
'Error Error in SQL Statement: SAPSQL_FIELDLIST_SUM_TYPE /BIC/ZCRETDT
Abort system error: RSDRC /FORM DATA_GET_ODS ERROR IN RSDRO_READ_ODS_DATA ZMSP
Abort system error in program SAPLRSDRC and form RSDRC /FORM DATA_GET_ODS'
Wondering if you know any OSS notes or any fix for this problem..
Many thanks in advance..

Hi,
please check OSS note:
822879
reg.
michael

Displaying BEx Error Messages in WebI

Hi
Is it possible to have the BEx error messages displayed in a WebI Report?
We have various scenarios where an error message is returned from customer exit variables, which is displayed nicely in the browser if the BEx query is executed, but is not shown at all when the same query is run in a WebI document.
Is there a way to get this done?
Cheers,
Andrew

Hi Andrew,
a very good suggestion of course, but sadly missing from the XI3.1 integration scenario.
My understanding is that the BW OLAP BAPI (as used externally by WebI, via MDX universes) does not surface these error messages natively .. so this warning isn't sent to the front-end
To some extent, this problem also remains in BI4.0 where the JCo error-handling still isn't fully captured between APS DSL Bridge and the BW BICS API . (unless low level tracing is enabled)
would be interesting to know what tips might be out there in the ecosystem, but i haven't seen any match winners to date.
Regards,
H

BEx error when connecting to BW system

I get the error below when trying to connect remotely to BW 3.1 system using BEx Analyzer. I can connect successfully to the BW system using SAPLogon and BEx install appears to be correct. I connect successfully to BEx 3.5 and BEx BI sandboxes. Any ideas.
<----
>
Error Group
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=20 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=<...>, GWSERV=sapgw57, SYSNR=57
LOCATION    SAP-Gateway on host <...>.com / sapgw57
ERROR       partner not reached (host xxx.xxx.xx.xxx, service sapgw57)
TIME        Tue Mar 27 06:23:23 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi.cpp
LINE        8724
DETAIL      NiPCo

Is the IP address correct? do you use IP address in your sap logon pad or hostname/servername ? do you maintain the IP mapping in 'host' file ? changed accordingly ?
also try to search if there are 2 'saplogon.ini' file, maybe the one with IP updated not used by BEx, try to overwrite with the latest one. normaly located in windows folder and program files\... \frontend ...
Hope it helps.
Regards

M93p+HD8570+Win7+KB267038/IE10: WMP crashes with BEX error playing AVI

Apparently this one's been out and known about for a while, but I just ran into it this week while finishing up the custom software install on a newly received M93p with Windows 7 Pro x64, which also included the AMD HD8570 graphics upgrade. Driver for the HD8570 (OEM) is provided by Lenovo, not by AMD. This is not a retail AMD card, but a Lenovo-provided OEM upgrade of an AMD card, and the drivers are only available from Lenovo.
Turns out Windows Media Player 12 on Win7 with the AMD HD8570 graphics on the M93p cannot play AVI files now, instead crashing with a BEX error.
Turns out this is caused by a Microsoft update KB2670838 in conjunction with certain AMD graphics and machine chipsets (Q87 on the M93p), which apparently includes the discrete HD8570 and the M93p. There is a discussion of this problem on Sevenforums in this thread, as well as in other places on the Internet.
Unfortunately, KB2670838 is also tied to the Windows Update that delivered IE10. So if you selectively UNINSTALL the KB2670838 update (which DOES eliminate the BEX error in WMP when playing AVI files) you also trigger the backout of IE10 which reverts back to the originally delivered IE8... which is probably undesirable for most of us. So while you now CAN play AVI files again, you're sadly back to IE8.
Also, the most recent Windows Update to IE11 in Win7 also retains KB2670838, so really any "current" version of IE beyond IE8 with this particular AMD hardware is going to see this BEX crash when WMP plays AVI files. There simply is no way to selectively uninstall KB2670838 by itself, while retaining IE10 or IE11.
Rumor has it that MS is "working on a fix", but for the moment it is obviously not publicly available.
That's the story. Just wanted to share what information I now am aware of.
If you do want to install IE10 or IE11 on Win7 and with the M93p and HD8570, then your temporary "solution" in this particular hardware/software configuration is to instead use some other media player program when wanting to play an AVI that you would otherwise use WMP for. For example, the English version of the excellent Pot Player is a superb alternative, as it plays EVERYTHING!!

I am having almost exactly the same problem with Lightroom 4 and now, with Lightroom 5.
I was able to import .NEF photos, .PEF and .RW2 RAW formats from the folders already on my external RAID harddrive. However, I was unable to import video from the same folders. My problem is exactly like the one ntreuter was having -- I can sometimes get a few video files to import, but then the import process runs for a very long time,and I get an popup error message "There was a problem importing the video".
When I try to "syncronize folder", the same thing happens. I am unable to import any video and the process ends with the popup error message "There was a problem importing the video". Sometimes I am also unable to upload photos because the import process crashes because of video files.
This is crazy. I've searched online and there are a number of reports of this problem, but no clear solution at all.
My system:
Lenovo W520
2.20 gigahertz Intel Core i7-2720QM
16 gigs RAM
64 kilobyte primary memory cache
256 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Hyper-threaded (8 total)
Intel(R) HD Graphics Family [Display adapter]
NVIDIA Quadro 1000M [Display adapter]
Any suggestions on how to resolve this problem are greatly appreciated!

Newest update to Firefox Crashes with BEX error code

Updated Firefox to newest version. Upon restarting Firefox it crashes with BEX error code. Deactivated all anti-spyware, removed all traces of Firefox and did a new re-install, and tried to open in Safe Mode but it still crashes upon start with same error code. (Firefox only runs on initial install but upon restart always crashes) Attempted to find an older version of firefox but can not find older version. I do not see any help related to the severity of my crashes. How do you fix the BEX crash?

When you started in Safe Mode*, did you get the Safe Mode dialog or Firefox never got that far? Did you ever get to your home page?
BEX = Buffer Overflow Exception or Data Execution Prevention (DEP) exception. DEP is a security feature that seeks to prevent exploits that inject program code into Windows memory. Firefox doesn't trigger this error on its own, but add-ons or external programs that tweak Firefox might.
Are you using any special configurations to run Firefox, such as virtual machines or sandboxing?
If not, it sound suspicious. You may want to run some supplemental scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/
* I assumed Firefox Safe Mode. Or was it Windows Safe Mode with Networking?

ITunes.exe crashes with BEX error, 10.7 32 bit on winXP

I installed ituens 10.7 32bit and itunes.exe started to crash with a BEX error. i have tried uninstalling an cleaning everything i can think of (HT1925) . i have tried deactivating Direct3D in quicktime. i'm using spanish XP i tried installing in spanish and english. no windows updates missing. i'm out of options. any ideas could help. i had a 10.6.3 installer also tried that one and still the same error (different numbers but basically the same)
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08660740
P8 : c0000005
P9 : 00000008

Hi Guys.
Im also getting a Bex error on my Vista laptop. See below. Originally did an update. Have since uninstalled and reinstalled. Any help would be appriciatted. Thankyou.
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.7.0.21
Application Timestamp:    504d85d9
Fault Module Name:    QuickTime.qts_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4cf45322
Exception Offset:    67891040
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    3081
Additional Information 1:    262d
Additional Information 2:    76f815d980ec17f1a0d4c8c987ca3dc6
Additional Information 3:    4d94
Additional Information 4:    92b97302c07b7f5457404bf3447e4bcd

BEX Error Crash

Hi, over the last few days (since Fri 6th Dec) I have been experiencing a BEX crash while gaming. The problem suddenly arose and persisted a few days ago with no obvious cause.
Here is the crash report:
Problem Event Name: BEX
Application Name: Smite.exe
Application Version: 0.1.1868.4
Application Timestamp: 52a0b68c
Fault Module Name: StackHash_e981
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: PCH_ED_FROM_ntdll+0x0002E1A4
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.2.9200.2.0.0.768.101
Locale ID: 2057
Additional Information 1: e981
Additional Information 2: e9819cd8ac1d7d587573848acbb266ed
Additional Information 3: 93b3
Additional Information 4: 93b32ba3a3ff6cbbf2f29c324bbec67a
From what I have read, it is a memory problem (or the way data is being written) but I do not know the source of the issue. I have tried restoring my computer to a date that I know it functioned perfectly on, as well as a complete wipe of the computer and
reinstall of everything, however the exact same error occurred. All of my drivers are up to date, and I have tried back-dating them to no avail. I have tried turning of DEP completely, which also failed to solve the problem.
The games that have caused the crashes are SMITE (a moba game) and Battlefield 4 (an fps) which are the only two games I have played, or even had installed over the last month. Nothing else has caused this problem, however I use the computer strictly for
gaming and any word processing required for school. I have not downloaded anything potentially harming, even so this should have been removed when I wiped the computer.
The main thing that I ask is for some insight into what my problem is (BEX error articles are relatively hard to understand), for example, is it a hardware issue etc. or any other fixes that I could try. Any help will be greatly appreciated,
especially as I have purchased a new gaming keyboard which I would like to be able to use to its full potential upon arrival.
Some other info: I built the computer myself over the summer using all new parts, Intel i5-3570k overclocked at 4.2gGHz, msi GTX 760 graphics card, ASUS z77 Extreme6 motherboard, a 128gb SSD, and a 1TB hard drive.

Hi,
Just as you said, this issue is mostly related to memory, the Event type BEX indicates a buffer overflow (/GS) or Data execution prevention exception.
And the parameter valuable c0000005 and 000000008 in the crash report both Indicate a STATUS_ACCESS_VIOLATION exception.
In most processes, the STATUS_ACCESS_VIOLATION exception will be an unhandled exception and result in termination of the process.
I suggest you perform a memory check, move the cursor to right edge in screen, click “search”, type “memory”, click “Diagnosing memory problems on your computer”.
Please also test this issue in clean boot mode and Safe Mode to eliminate software conflicts and driver compatibility issues.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
Regards,
Yolanda
Yolanda
TechNet Community Support

BEx error (CL_RSR_REQUEST and GET_KID)

Similar Messages

Maybe you are looking for