Bex Error message

Hi,
While executing one particular query in BEx I am getting the error message: "System Error in program CL_RSR_GRID and form FILL_AXIS_SET_LINE:TX_MN_MISSING" . The rest of the reports are running fine. the users needs to test this particular query. Any ideas.
Thanks.

Hi,
I am Also facing the same prblem when refreshing Querry. can u tell me what r the steps u taken.
How can we check and all.
Thanks in Advance!!
Regards,
Rukmini.

Similar Messages

Displaying BEx Error Messages in WebI

Hi
Is it possible to have the BEx error messages displayed in a WebI Report?
We have various scenarios where an error message is returned from customer exit variables, which is displayed nicely in the browser if the BEx query is executed, but is not shown at all when the same query is run in a WebI document.
Is there a way to get this done?
Cheers,
Andrew

Hi Andrew,
a very good suggestion of course, but sadly missing from the XI3.1 integration scenario.
My understanding is that the BW OLAP BAPI (as used externally by WebI, via MDX universes) does not surface these error messages natively .. so this warning isn't sent to the front-end
To some extent, this problem also remains in BI4.0 where the JCo error-handling still isn't fully captured between APS DSL Bridge and the BW BICS API . (unless low level tracing is enabled)
would be interesting to know what tips might be out there in the ecosystem, but i haven't seen any match winners to date.
Regards,
H

BEx error messages

At times the error messages that BEx produces are not as clear as they could be, especially in the case where authorizations are involved.
Is there a way of changing or even creating my own error messages, that I could make more user friendly for some of our key users? If so please advise.
Regards
Harry

Hi Harry,
Pls note "Error message" which you want change and goto SE38 tcode enter program name SAPLRRSV and fine out relevant error message and change as per your requirement.
if it is useful information pls don't forget to assgin points.
regards
ANR

When I open BEx, error message appears: "....trace level 8 activated.."

Hi,
when i open bex, then it appears:
"SAPGUI 640
Enviroment information:
Directory: 'C:\Documents and Setting\ ...\SapWorkDir
trace level 8 activated
logging activated
For maximum data security delete the settings as soon as possible."
But I dont know, which setting it is meaning.
Thanks zd.

Jan,
The "*." should NOT be in the registry.
We are still experiencing the problem and have a customer message into SAP. The problem only occurs logging on through SAP Portal. It occurs on Sun J2SE version 1.5 and 1.4.2 consistently. It occurs using the Microsoft VM occaisionaly. Deleting cookies, temporary internet files and clearing the history in IE seems to solve the problem for users using the Microsoft JVM.
We are on XP SP2 with all the latest MS security patches. Since we use Portals as the main logon process, we have the registry key set to prevent saplogon from launching when the user logs on.
Hope that helps,
John

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

BEX Error, Explorer.exe has caused a problem and needs to close

Whenever, i click on My Computer on my laptop it opens up fine , but after closing My Computer, i get the message "Windows Explorer has stopped working" and it asks me to try to fix the issue by searching online.
When i click on the details i get the below message :
Problem Event Name: BEX
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d6727a7
Fault Module Name: bho.dll_unloaded
I am using Windows 7 Pro, SP1. I have scanned my computer using latest McAfee and it couldn't find any virus. Also, i tried booting from Win 7 DVD and tried doing a repair, but still the same issue.
This started 2 days back suddenly . I am able to browse and do other things, this issue occurs only when i click on My Computer from my Desktop or go to Start-->Computer, either of the two. Can anyone tell me how to fix this issue?
Pallab Chakraborty

From the link below:
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_programs/problem-event-name-bex-error-message/cf5baf73-0877-4070-abfb-a2c3a17a9e10
right click on my computer
go to properties
click on advanced system settings
under performance, click settings
click the Data Execution Prevention tab, and then click Turn on DEP for all programs and services except those I select.
click Add, browse to the executable file for the program and add it.
In your case you would add explorer.exe.
Steve W. MCSA,CCNA,MCP,A+,SEC+,CIW

A BEX Error From Word 2013

Hello,
I got a BEX error message when I use IE to open a word document with word in a B/S Application System. The error message "Microsoft has stopped working", below are the problem details:
Problem signature:
Problem Event Name: BEX
Application Name:WINWORD.EXE
Application Version:     15.0.4569.1504
Application Timestamp:
   52c5eccd
Fault Module Name: unknown
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
00000000
Exception Offset: 0013d57c
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2052
Additional information about the problem:
LCID:    2052
skulcid:    2052
How do I fix the
problem? Thx!

Hi,
According to this event log, we couldn't identify where the reason of this problem it is.
BEX: Indicates a buffer overflow (/GS) or DEP exception. It indicates that cureent app or hardware driver probably encounter compatibility problem, you can refer to the contents of the link below for more details:
http://technet.microsoft.com/en-us/library/cc738483(WS.10).aspx
Application Version:    15.0.4569.1503, your office version is not latest , please try to check Windows update to install Office latest update for test to fix this problem.
Roger Lu
TechNet Community Support

BEX error (HP CP1025nw)

Hi, The printer icon in the system tray HP1025nw BEX error message and it does not work. (The system I use windows 7-32-bit.)
Can you help?

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Quicktime has stopped working message when I open that. Error message: Problem Event Name: BEX

When I try to open Quicktime I get a message saying it has stopped working. The error message says:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.73.80.64
Application Timestamp: 508900dd
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.73.80.64
Fault Module Timestamp: 508900c0
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 9da7
Additional Information 2: 9da7586a62744150d954cf6a5ec876d1
Additional Infromation 3: db4f
Additional Information 4: db4f7e51c3cffddbf929f5acfefa97e3
Similarly, when I try to play media on iTunes, or when my iPhone is backing up, I get a message saying iTunes has stopped working with the error:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0800a3bc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: Same as 2

We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Error Message in BEx Report Designer 7.0

I am getting the following error message when I try to add a data provider (Query) to BEx Report Designer:
RSBOLAP 017 Java Communication Error: RFC destination NOT_CONFIGURED does not exist
Would anyone be able to provide feedback on what to do?

Hi Selva Kumar,
Its a Basis Issue , report to a Basis asministrator about the configuration of Report Designer .
For info refer this link:
https://forums.sdn.sap.com/click.jspa?searchID=21289661&messageID=6734602
Cheers,
Tanish

Error message...while accessing the BEx Web Analyzer on EP7

hi experts,
i have deployed and configured BI java on portal server.and while accessing the roles from portal(ep7) ,for the BEx Web Analyzer getting the error message as shown below.but the other two i.e. planning wizard and planning modeller are running fine.is there is some problem while configuring or while deploying files on the portal server..please help me in this case.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.km.base.
Exception id: 10:32_28/02/08_0069_19249950
See the details for the exception ID in the log file

Hi Rohini,
Let me know, have you got the right authorization to do this transaction. Check your profile, if you are using for a long while, check whether you have changed any user settings.
Good luck
Om
Reward it, if u feel helpful.

Error Message while opening workbook or Query in BEx Analyzer

Hi all,
Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
Thanks and Regards
Mui Kanva

Hi Mui Kanva,
Does your problem occur in a copied system?
I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
Please check to activate your source system?
We accept the error messages in our QBW and did not activate the RFC connection.
Regards
Andreas

Error Message: EventType : BEX P1 : iTunes.exe --- iTunes Crashes!!

Hi,
Please help with this seemingly unfixable issue:
When I go to synch my iPod (30 GB/Video), iTunes crashes and shutsdown and I get an error message with this this string:
EventType : BEX P1 : iTunes.exe P2 : 9.2.0.61 P3 : 4c18061b
P4 : iTunes.dll P5 : 9.2.0.61 P6 : 4c1805f8 P7 : 0004be7e
P8 : c0000409 P9 : 00000000
My attempts to fix have been, and none of these worked:
1. Run FULL Virus Scan
2. Run FULL Adaware Scan
3. Run FULL Malwarebytes' Anti-Malware Scan
4. Apple Tech Suppor Recommended I uninstall (in this order) iTunes, QuickTime, Apple Software Update, Apple Mobile Service, Bonjour, Application to Apple Support. After this I went in to my Registery and deleted any iTunes/iPod/Apple files. I did the same in Windows Explorer (Application Data and Program Files). I also did a Registery scan (Uniblue Reg. Cleaner Software).
5. Shutting down all programs running.
6. "Restoring" my iPod
When I start to synch my iPod after about 100 songs an (Windows) iTunes Error message pops up and crashes.
Please help if you can and if you actually know how to fix this!
Al thanks!!
Steven
I went to open up the ref. file FYI and a lot computer language showed up including (if this is important)
EXE NAME="kernel32.dll" FILTER="GRABMIFILTERTHISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="989696" CHECKSUM="0x2D998938" BINFILEVERSION="5.1.2600.5781" BINPRODUCTVERSION="5.1.2600.5781" PRODUCT_VERSION="5.1.2600.5781" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="5.1.2600.5781 (xpspsp3gdr.090321-1317)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFE572" LINKER_VERSION="0x50001" UPTOBIN_FILEVERSION="5.1.2600.5781" UPTOBIN_PRODUCTVERSION="5.1.2600.5781" LINK_DATE="03/21/2009 14:06:58" UPTOLINKDATE="03/21/2009 14:06:58" VER_LANGUAGE="English (United States) [0x409]" />

Hi,
I thought I would hijack the thread since the OP seems to have gone missing, and I'm having the same issue, and have taken the same steps to correct it - to no avail.
Itunes does NOT appear to be crashing at the same song/album. Rather, when I connect my ipod Video, it crashes before it can even begin syncing. Any help would be greatly appreciated.

Error message during BEx analyzer execute

Using BEx analyzer, system show error message like below:
Variable 0P_FVAEX could not be replaced;
Program error in class SAPMSSY1 mehtod: UNCAUGHT_EXCEPTION
System error in program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET:VARIABLES_SUBMIT(see long text)
Who can solve this problem? Thanks!
Message was edited by:
Almini Sanbra

Dear sanbra,
We have faced the same error and its resolved after applying the
Following:
I have applied the following Note
1079186 Error when you filter by characteristic values
Please also apply the following patches to your system:
Support packages and patches ->SAP netweaver->SAP Netweaver->
SAP Net weaver 2004s->Entry by component->BI java
Update with the latest patches
1)BIBASES12P_4-10003477.SCA Patch for for BI BASE SERVICES 7.00 SP12 4
2)BIWEBAPP12P_4-10003476.SCA Patch for BI WEB APPLICATIONS 7.00 SP12 4
3)BIIBC12_0-10003495.SCA SP for BI INFORM. BROADCASTING 7.00 0
Regards,
Suman Raju.
***********IF useful some points please***********

Error message when connecting to Bex Query in WebI

Hi all,
I've a Bex Query and I created a universe on top of that Query. I selected few characteristics and one keyfigure in WebI to build a report. When I ran the query I'm getting a error message as below :
A database error occured. The database error text is: Failed to execute MDX Query. Reason : Error occured when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)

Hello John:
I realize you are using webi, but a similar error is documented for Crystal Reports in the following KB:
[1369523 - Crystal Reports and SAP BW -- 'Database Connector Error: BAPI Error #:0' |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363339333533323333%7D.do]
See if the troubleshooting tip there helps.
- Ludek

Bex Error message

Similar Messages

Maybe you are looking for