BEx error when deleting a query in BWD

Hi All,
I am getting error "BEx Transport request ‘BWD903385’ is not available or not suitable" when trying to delete a query in BEx in BWD. Does any body knows the solution to this. Thanks in advance and I will assign points.

Hi Toja,
It means that this query has been transported to other systems and so you need an open transport request to capture this delete and send it to other systems. Please create a new request and assign it to the Dev Package that this query is assigned to (RSA1 > Transport connection > Bex Truck icon). Then log back into Bex and try to delete the query.
Hope this helps...

Similar Messages

  • BEx error when running a query or workbook

    Hi guys,
    We're experiencing the following issue (trace dumped below) within BEx, while running either queries or workbook.  Nothing special in ST22.
    SM21 says:
    Communication error, CPIC return code 020, SAP return code 223
    Conversation ID: 53497548
    CPI-C function: CMSEND(SAP)
    We're using:
    BEx version "7.x (based on 7.20)", SP3, revision 1728
    SAP version
    SAP_ABA     700     0023     SAPKA70023
    SAP_BASIS     700     0023     SAPKB70023
    PI_BASIS     2006_1_700     0013     SAPKIPYM13
    ST-PI     2008_1_700     0003     SAPKITLRD3
    SAP_BW     700     0025     SAPKW70025
    FINBASIS     600     0019     SAPK-60019INFINBASIS
    SEM-BW     600     0019     SAPKGS6019
    BI_CONT     703     0016     SAPKIBIIQ6
    ST-A/PI     01M_BCO700     0001     SAPKITAB7F
    Dump content:
    3/3/2011 12:39:15 PM----
    com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: CPIC-CALL: 'CMRCV : rc=20
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       connection to partner '10.1.9.126:3320' broken
    TIME        Thu Mar 03 12:39:14 2011
    RELEASE     720
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -6
    MODULE      nixxi.cpp
    LINE        5087
    DETAIL      NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     6
       at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
       at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
    CPIC-CALL: 'CMRCV : rc=20
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       connection to partner '10.1.9.126:3320' broken
    TIME        Thu Mar 03 12:39:14 2011
    RELEASE     720
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -6
    MODULE      nixxi.cpp
    LINE        5087
    DETAIL      NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     6
       at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
       at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
    Brgds,
    Olivier

    Hello Suman,
    Check the table rszglobv for this variable - ZCONLEH.
    If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
    If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
    Regards,
    Shweta

  • Error message "Error when scheduling the query(JOB_CLOSE)".

    Hi all,
    While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
    Could you please find what this error is?
    Thanks,
    Uday.

    Hi Uday,
    This problem can occur if you changed the query definition.
    In this case the query definition would be inconsistent with the existing extract structure.
    Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
    to delete.
    After this you could use the same table name for any further extract that you need to create.
    One caution is that the extract table should not be deleted through any other transaction before you run the report.
    Rgds,
    Colum

  • Error when save the query

    Hi All,
    We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
    1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
    2.  An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
    3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    Please help me from this error.
    Thanks in Advance
    Ravi

    Hi,
    Check following thread and underlying note..
    error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
    Abhijeet
    Reward pts if useful..

  • Attribute change run fails - "Error when deleting the data record /B05/X.."

    Hello,
    I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
    I have already done RSRV on this objects and found no errors, but still the activation fails.
    please give your suggestions ASAP to fix the issue as it is on production system.
    Thanks.

    Attribute change run could fails due to 2 reasons-
    (1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
    (2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
    check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
    Hope it helps you.

  • Error when executing a Query through information Broadcasting

    Dear SDN,
    We have configured information Broadcasting in the Web Reports---
    Scheduled and then when executing the following error is coming
    500 internal server error - Microsoft internet explorer
    Error when processing your request
    What has happened?
    The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
    Note
    The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
    The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest us to resolve this error..
    Help will be greatly appreciated with points..
    Thanks in advance

    Hi
    Thanks...
    I have given only Fiscal Year/Period Variable
    Other than Fiscal Year/Period Variable....No Variables in that Query..
    In FI Queries, I did not use 0CALMONTH Variable...
    I do not know why it is giving that error..
    Please suggest us to resolve this error..
    Thanks in advance

  • Error when executing a query on master data

    Hi Friends,
    When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
    <b>An error occured in the communication with the BW Server.
    Due to this connection has to be closed.</b>
    <b>Detailed Description:
    The system is configured incorrectly.</b>
    Please tell me what could be the problem? How to overcome this?
    Thanks,
    Sasi

    Hi Arun,
    Before the execution of query I did that. And it was ' Query is Correct'.
    Any more ideas?
    Thanks,
    Sasi.

  • Error when executing a query in ECC

    W'e're getting the following error when attempting to run a Crystal Report (2008) that uses an SAP ECC query as the datasource:
    Database Connector Error: "Screen output without connection to user"
    Anyone seen this before? Tried looking this up in the forum but didn't find anything.
    Thanks.

    Are you up to date on the Crystal ECC transports?
    Is the user running the Crystal Reported assigned to the SAP query user group (SQ03/02)?
    I have seen strange errors with these two things.
    Why not upgrade to CR 2011?  We found with our license there was no addiitional fee/cost to do this.
    Tammy

  • Error when running a query against Multiprovider using 0FIGL_VC1

    Hi SAP Gurus,
    I'm creating a MultiProvider for FI-GL.It has 2 Cubes.one is 0FIGL_VC1 (Virtual Cube) and other one is Customised Cube.When I run Query against this MultiProvider with  the combination of basic cubes key figures,I'm getting an error
    'Abort system error in Program SAPLRSDRC and Form RSDRC/Form DISPATCHER/RECEIV '
    then system gets disconnected from the Server .
    Please give me the solution to fix it & I'll assign the points .
    Thanks & Regards
    Raja

    Hello Suman,
    Check the table rszglobv for this variable - ZCONLEH.
    If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
    If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
    Regards,
    Shweta

  • Error when deleting Page Group

    Hi
    I got the following error when i am trying to delete a Page Group.
    How can i rectify this.
    Portal Version:9.0.2.2.14A
    Error: An unexpected error has occurred (WWS-32100)
    ORA-1: User-Defined Exception (WWC-36000)
    Error while deleting page. (WWC-44130)
    An unexpected error occurred: ORA-01422: exact fetch returns more than requested number of rows (WWC-44082)
    And also clicking on "Actions" icon of a "Text" item in this page group, i got the following error....
    Error: Item does not exist. (WWS-22507)
    An unexpected error has occurred in portlet instances: ORA-01422: exact fetch returns more than requested number of rows (WWC-44846)
    Any patch is available to just rectify this "Text" item related issues.....!!
    Thanks&Regards
    Krishna Prasad

    Please report this problem to Oracle Support.
    Regards,
    Jerry
    PortalPM

  • Error when deleting a record:  "FRM-40202 Field must be entered"

    Dear all, please I need your help in this little problem.
    I am using Forms 10g , and I am having an issue when deleting a record at runtime. It is giving "FRM-40202 Field must be entered".
    I have reviewed the code but still cannot guess what could be the reason.
    Any idea please. Thanks
    Edited by: user562674 on 02/05/2011 12:35 ص

    Hi
    This error is caused due to the NOT NULL constraint u have in ur db for that item...
    u have 2 options to use ...
    1.Either u set the Required property of that item to > no
    2.Or u give it an intial value...
    To get ride of this error message...
    Hope this helps...
    Regards,
    Ammatu Allah.

  • Error when deletting internal table

    Hi to all,
       I have small requirement. Am getting runtime error , when am deleting internal table when that internal table will have only one record. how i can solve this problem. Give me some clues.

    Hi Geetha, you can do this
    IF itab[] IS NOT INITIAL.
      LOOP AT it_ekbe.
        IF it_ekbe-bwart_i NE '101' AND it_ekbe-bwart_i NE '105' AND it_ekbe-bwart_i NE '201' OR it_ekbe-bwart_i NE '202' AND
           it_ekbe-bwart_i NE '221' AND it_ekbe-bwart_i NE '222' AND it_ekbe-bwart_i NE '231' AND it_ekbe-bwart_i NE '232' AND
           it_ekbe-bwart_i NE '241' AND it_ekbe-bwart_i NE '242' AND it_ekbe-bwart_i NE '251' AND it_ekbe-bwart_i NE '252' AND
           it_ekbe-bwart_i NE '261' AND it_ekbe-bwart_i NE '262' AND it_ekbe-bwart_i NE '281' AND it_ekbe-bwart_i NE '282' AND
           it_ekbe-bwart_i NE '291' AND it_ekbe-bwart_i NE '292'.
          DELETE itab WHERE mblnr   = it_ekbe-lfbnr_i
                        AND matnr_i = it_ekbe-matnr_i
                        AND ebeln_i = it_ekbe-ebeln_i
                        AND ebelp_i = it_ekbe-ebelp_i
                        AND werks_i = it_ekbe-werks_i.
        ENDIF.
      ENDLOOP.
    ENDIF.
    This routine does the same but with better performance, I hope this help you.
    Regards
    David Carballido

  • Error when uploading SAP query in ECC6 from 4.5B system

    Hi expert ,
    I have down loaded SAP Query(infoset) from 4.5B server and now i want to upload this query to ECC6.0.  when i upload this query(infoset) to ECC 6 as follows to download step like from SQ02 .  but after executing i am getting error
    "  infoset ZTEST (import option REPLACE)"
    " F | Error When generating Transport dataset
    I am following all steps even created user group in sq03 which it is in my 4.5b system.
    Thanks
    Chandra

    Hello,
    It won't usually work when you try to download a infoset from a older release and try to upload in a newer version. However there is a workaround for this.
    If you debug the program while uploading, you will notice that certain if conditions fail on a few fields in the file you are trying to upload are missing. What i would suggest you to do is, download any infoset from your ECC 6.0 version and keep it as a reference for filling these missing fields into the older version infoset you are trying to upload.
    Vikranth

  • ORA-22813 error when deleting spatial objects in LIVE

    Hi,
    We are getting an ORA-22813 error when attempting to delete a spatial object from a version-enabled table in workspace LIVE. The spatial object to be removed has a SDO type of multipolygon. The geometry information consists of 4 rings with a combined ordinate count of 4120. The statement used to delete the row is:
    delete from tableA where tableA.id in (select tableA.id from tableA where tableA.id = 3);
    The error occurs only on a 10g R1 Oracle instance (10.1.0.5.0) with Workspace Manager version 10.1.0.7.1. The delete operation succeeds without problems on a 10g R2 (10.2.0.2.0) instance with Workspace Manager version 10.2.0.3.1. The statement is also executed successfully on the 10g R1 instance if the table is not version-enabled.
    Any help on this would be appreciated.
    Thanks

    Hi,
    I would recommend filing a TAR in this one. The only ora-22813 error involving workspace manager and geometry columns that I know about involves queries that need to sort data for which the size of the geometry column was >30k. Does the execution plan for the delete statement involve any kind of sort? However, this is an old 9.2 bug, that I believe was fixed for all 10.1 and newer releases.
    Does the same error happen if you do not use the subquery?
    Regards,
    Ben

  • Getting error when we execute query in RSRT1

    Hi Gurus,
    I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
    but when i execute query in RSRT1 i am getting error message
    1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
    2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    3)Error when generating dataProvider.
    For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
    can any once can help me to soleve this issue.
    Thanks in advance.
    Raju.k
    *points to be assigned.

    Raju,
      Try replicating your hierarchy DS and reload data.
    hope it helps,
    balaji

Maybe you are looking for

  • Problem with CSS Designer in the Panels

    Hello, I have just joined Creative Cloud, I have downloaded the newest apps. In Dreamwever I cannot see the CSS Designer in the panels. After a few ours of looking for solution for this problem (all throw Internet inclusive this Forum), I have to ask

  • Level building/shared members

    Can you generate shared members when level building your dimensions?

  • Going from Ipod to Itunes - is it impossible???

    My computer recently crashed and I lost everything! The really important stuff was backed up but the only copy of my music is on my ipod! Is there anyway to copy this music from my ipod back to itunes? Please please help. You can email me at [email p

  • Adding a custom meta data field which lists out content id based on query

    How can we add a custom meta data filed which lists out content id based on query like dDocType <matches> `AssociatedProduct`? Or other alternative would be to have a custom metadata field such that it allows selection of content id using link wizard

  • CustomizeWSDL, importing xsd in wsdl file.

    We have requirement of importing centralized XSD files in WSDL, 1) based on best practices I believe we should do following: <types> <schema xmlns="http://www.w3.org/2001/XMLSchema" > <import namespace="http://xmlns.oracle.com/HelloWorld" schemaLocat