Bex Exit variable with workbook

Hi experts,
I've defined a query that uses an exit variable which select a specific range of customers.
When I execute the query the variable is populated with correct values.
Then I saved this query as workbook; but when I execute the workbook, the selection is not taken into account; it's as the exit is ignored.
When executing the workbook I 've got an information message as follow:
"The Can be changed in query navigation property has been set for variable VACLCONSID, characteristic 0BILLTOPRTY. However, the variable is used in the query in such a way, that the system is unable to apply this change-option"
But in my query definition for VACLCONSID, flag "can be changed in query navigation" is't checked.
Moreover I can't debug exit ZXRSRU01 with a workbook.
Any ideas
Thanks in advance
Thierry

Hi Radha,
thanks for your reply.
My exit variable depends on a customer variable which is filled during variables screen processing
User selects a period, and exit defines customers selection with this information
I use i_step= 2 in exit ZXRSRU01
No other parameters are filled in the workbook by user
Regards
Thierry

Similar Messages

Populate user exit Variable with User Authorizations using ABAP?

Hi, Does anyone know of a way to populate a user exit variable (with ABAP) with the Authorization Values for a user running a report? I am turning off authorizations for our InfoProvider using RSSM and want to populate a variable instead and use the variable as a filter.

Hi Kenneth ,
You need dynamic authorization in your report .This can be done at query runtime by using exit variable and writing cmod code for the same .
This code will read authorization maintained at runtime of query in i_step = 1 and will pass input var values accordingly .
For step by step information you can access this document .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f9f33c-0f17-2d10-d3a2-ae52ccd00780?quicklink=index&overridelayout=true
Hope this will be helpful .
Regards,
Jaya Tiwari

Map the user exit variables with the queries/cubes using them

Hello Friends,
What are the post unicode conversion tests that you can perform on front end/existing queries?
is there any added advantage for queries due to unicode?
is testing the working of variable enough? is there any table to map the user exit variables with the queries/cubes using them?
Thanks
Tanya

Guys, any clue about this? Answer are appreciated.
Thanks
Tanya

Webi Bypassing BEx Authorization Variable with SAP Exit

BEx query has Hierarchy Node Variable with Authorization as processing type. Its set as User Input ready
When the Webi report is refreshed, the LoVs appear as per the Authorization. However, if user doesn't select any value (pushes from right to left in variable screen) he gets NOT_AUTHORIZED error. Which is not intended, it should check the authorization in the background via SAP exit and populate the result. This is how it runs inBEx query.
However, in Webi it's giving NOT_AUTHORIZED error? This is how the product is designed to work or is it a bug.
I see several forum threads and SAP KBAs/notes but they are not answering my question. Could anyone please help.
I am ready to provide more details on this error.
Thanks,
Tilak

Hi,
this is how authorization variable would work in any of the clients and not just Web Intelligence.
You created an authorization variable which is configured as "read for input", so the user is getting prompted.
So In Web Intelligence the LoV shows up.
if the user does not select a value, then you are not sending a value, so you basically asking for all data and you are not allowed to see all data and therefore you are getting the message "no authorization".
if you are making authorization variables as ready for input then the user needs to select the proper values - regardless of the BI tool.
if you want the authorization to be check in the background then the authorization variable should be configured to not have ready for input.
regards
Ingo Hilgefort

Bex exit Variable from another one.

Hi Expert,
Do you Know how to define a value for a variable from another that is navigable in the bex query. In other words, when i change a value during the OLAP navigation in the query, another variable must change on the basis of the first one. The first variable isn't a "variable selected from user" on the start of the query but is a "mandatory" with a default value. When the default is changed on the OLAP, another variable must change.
How can I do?
Thanks.

OK. I see - just to be sure: You dont want to call the variable screen, when making the change, right? That is how I understand it, if I am wrong, you can use an exit variable for ZC_FASCIA and fill it depending on what was set in 0calmonth variable.
So, assuming you dont want to call the variable screen, have you tried setting the dependent variable to changeable during query navigation? I dont think it works, but anyway, try it out...
One way of "solving" your requirement of "set value for Y when X is changed by user" could be to use a compounded characteristic where you compound ZC_FASCIA with 0calmonth. I think you should be able to compound ZC_FASCIA = 1 with 0calmonth = <blank>...
Next, create a variable for this new char. Using a default should be possible and it would have to be changeable during query navigation and let users change the default month without calling the variable screen.
I dont know if this works/helps...
Regards
Jacob
P.S: Your requirement only seems to come from the "need" to have 0calmonth = #. If you did not need the #, you would always have 2 for ZC_FISCIA... so I was wondering why you need the blank month? Something with an annual value stored in # month??
Edited by: Jacob Jansen on Jan 29, 2010 9:38 PM

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Exit variable with multiple values or with ranges

Dear Experts,
I have a date exit variable used in a planning level. If the variable has a single value, I am able to execute the planning function. But if the exit is populated with a range or multiple single values, I am unable to execute the planning function. I get this message 'Variable "ZXPRDATE" is not restricted to a single value'.
I should be able to read all records from the cube in date range of one week for repost. Please advice if this is possible.
Thanks,
Gnana

Hi Mayank,
Yes, I am using the same variable for repost function also.
Let me explain in detial.
Req: I have a planning level with product, effective date and count(keyfigure). I want all products that has a count keyfigure value for the last one week.
If my effective date is a single value, I get all the list of products on that particular day. But, if my effective date has multiple dates or a date range, nothing is read from the data base.
Please advice.
Thanks,
Gnana

Exit variable with $

Hi,
What is the meaning of aexit variable with a $ sign in front ot it?
Thanks

hi Will,
i think you mean authorization variable via user exit
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
hope this helps.

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

BEX EXIT VARIABLE

hi all,
IAM SATYA HAVING REQ REGARDING bex varaible user exit.i have one variable i.e Country ship from which is mandatory value ,i enter value as US ,AND TEHRE IS ANOTHER VARIABLE COUNTRYSHIPTO WERE IN THIS VARIABLE SHOULD FILLED WITH VALUES OTHER THAN THE VALUE ENTERD IN COUNTRY SHIP FROM I.E COUNTRY US OR ANY COUNTRY VALU FILLED IN SHOULD NOT BE FILLED IN COUNTRY SHIPTO ,IT SHOULD BE FILLED WITH OTHER COUNTRY OTHER THAN THE VALUE FILLED IN.
PLEASE TELL ME HOW.
BYE
[email protected]

Hi Satish!
using capital letters means "shouting " so dont use capitals.
is the sencond variable is a user entry or ... its filled by a program?
with regards
ashwin

Change customer exit variable in selections over Dropdownbox

Hello Experts,
we are on NW2004s, SP12.
I have a customer exit variable (0CALYEAR) in two columns. In the first column the customer exit variable and in the second column the customer exit variable with an offset -1.
Now I want to change the year in a dropdownbox. Under <=BW3.5 that was not possible, only over a how to paper.
I can fill the dropdownbox in the web template but when I change the year, it jumps back to the year selected by the customer exit. How can I change the variable in the new web application designer (2004s) during the navigation? Has any one experience with such a problem?

Hallo Frank,
how can I change the variable values in the WAD?
The parameters of the variable: mandatory, customer exit, reference characteristic: 0calyear, single value, not ready for input.
My coding:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: i_s_var_range TYPE rrs0_s_var_range.
DATA: i_calyear(4) TYPE c,
 i_duedate(4) TYPE c.
IF i_step = 1. " Variable nach Selektionsbild bearbeiten
 READ TABLE i_t_var_range
 WITH KEY vnam = 'CALYEAR_X01'
 INTO i_s_var_range.
 i_calyear = i_s_var_range-low.
 i_duedate = '0210'.
 IF sy-datum+4(4) GE i_duedate.
 i_calyear = sy-datum(4).
 ELSE.
 i_calyear = sy-datum(4) - 1.
 ENDIF.
Rückgabetabelle füllen
 CLEAR l_s_range. " Range-Tabelle füllen
 l_s_range-low = i_calyear.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
ENDIF.
Thank you for your fast reply!
Regards
Jens

Restricting Charecterstic using customer Exit variable

Hi Experts,
Please adivise how can I restrict values of a charectersitc Infoobject using a customer exit variable.
I have a InfoProvider which has a authorisation values from which I have to retrieve the authorisation values.
Regards,
Koka.

Thanks for the reply Bhawani, I have a function module to fill the Customer exit variable with the values retrieved from DSO.
Can you please explain me the second step mentioned or can I direclty call my FM in the Include ZXRSRU01..
WHEN 'XXXX '. ( customer Exit varaiable)
      CALL FUNCTION 'ZBI_LOAD_AUTH'
        EXPORTING
          I_AUTHVALTYPE = 'auth value'
        TABLES
          E_T_RANGE     = E_T_RANGE.
Regards,
Koka.

How to get back a BW exit variable in a WEBI

HI,
I have created an exit variable on 0CALDAY (calendar day) in a BW query which return me the current day. I have created an univers based on this query.
When I create a WEBI on this univers, the exit variable is not taken into account. Even if I put the calendar day in the filter section.
Can anybody help me please ??
Regards.

Hi Jon,
BEx exit variable will not appear in BOBJ universe/report and it can be seen in BOBJ universe/report when the BEx exit varaiable created is used as prompt value/selection at BEx.
Once, BEx exit variable is added in BEx prompt/filter, the same can be used as filter in BOBJ universe/filter.
Regrads,
Chithambar.

IP: Exit-variable multiple single values

Hello,
I have a question to Exit-Variables in IP. I'd like to fill an Exit-variable with several single values, e.g. A, D, G. At the moment I could transfer only one single value, e.g. A, with following coding:
l_example TYPE CHAR VALUE 'A'.
l_s_range-low = l_example.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO p_t_range.
How could I change the coding for transferring several single values?
Many thanks for your help.
Friedrich

Hi,
take whatever values you want to populate into one internal table l_example. Then loop over this internal table.
Loop at l_example into wa_example.
l_s_range-low = wa_example-value.
l_s_seqno = sy-tabix.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
insert l_s_range INTO TABLE p_t_range.
clear wa_example.
Endloop.
Hope this works.
Regards,
Bindu

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Bex Exit variable with workbook

Similar Messages

Maybe you are looking for