BEx Filter text (long / short)?

Hello,
I have Cost Center which contains different long / short text.
In Report it is no problem to display all in long text.
Problem: When I make a pre-selection via a variable in BEx it will display short text.
Is there a way where I can say to BW "show me the filter in long text"?

Hi,go to InfoProvider maintainance -->Extras (from menu bar) >Structure Specific InfoObject Properties>Set 'Text type' to 'long' for your characteristic. activate infoprovider. log off and log into bex and check the result.

Similar Messages

  • Text Type (short - long) in F4 selection help (web)

    How can I change the the text type (short - medium - long) in the F4 help for a variable on the web? Currently the short text is always displayed and I want to show the medium text.
    I had the idea the setting 'text type' (in rsa1\infoobject maintenance\ tab bex) is responsible for this, but changing this setting has no effect. I also tried to change this in the query designer (infobject properties \ display as), again without result.
    The query is based on an InfoSet.
    Thank you for your help!
    Kind regards
    Dirk

    Hi, you can try to change the transfer rules setting matching the medium text from the source system to the long text in the infoObject and then change the infoObject text properties. I have the same problem with the infoObject with only the short and medium description. In the F4 i can have only the short description.
    I hope it help
    Alberto

  • Upgrade to SCM7.0 DP info objects (Characteristics) long/short text issue

    Hi All,
    We have upgraded from SCM4x to SCM7.0. The info objects characteristics customized long and short text is not updated in SCM 7.0.
    Example: Info object 9ALOCNO standard long/short text is APO location. But in SCM4x they have changed to Plant. After upgrade this text is set to APO location, not the plant. Like this many chars text have been changed to SAP standard.
    When I try to change text of info object creates transport request.
    Is this standard behavour when we upgrade?
    Please share your thoughts and let me know for more information.
    Thanks,
    Sreeni

    Sreeni,
    With every upgrade the customization is lost. We will have to make a list of all customized objects and make the change again in the upgraded system.
    Hope this helps.
    Thanks
    Mani

  • Long Text to Short Text connversion in IW31/IW32

    Hi Experts,
    I am working on a requirement where I need to overwrite the short text for material description with the long text while creating the maintenance order in IW31/IW32.
    Initially I thought of handling this in a implementation of BADI IWO1_PREQ_BADI in method DECISION_COLL_PREQ.
    But this this method is gettign triggered when the paurchasing data is being entered and even before the long text is entered.
    Once the order is ready to be saved, and once the user clicks on save I want to write this conversion where I can copy the long text into short text overwriting the material description in component tab of IW31/IW32.
    Please check and suggest the BADI/userexits for thsi purpose.
    Regards
    Kishore

    Hi Kishore,
    Go to transaction SE24, class name CL_EXITHANDLER, go to methods, double click on method GET_INSTANCE.
    Set a break point at
    CALL METHOD cl_exithandler=>get_class_name_by_interface
    EXPORTING
    instance = instance
    IMPORTING
    class_name = class_name
    CHANGING
    exit_name = exit_name
    EXCEPTIONS
    no_reference = 1
    no_interface_reference = 2
    no_exit_interface = 3
    data_incons_in_exit_managem = 4
    class_not_implement_interface = 5
    OTHERS = 6.
    CASE sy-subrc.
    Now run trasaction IW31, press f8 till you reach bfore save button, enter the long text and all, now press the save buttton, control will break if in case any BADi is there(I think there is), exit name and instance will give you the BADI details.
    I think this is one of the simplest way.
    Thanks and Regards,
    Antony Thomas
    Edited by: Antony Thomas on Aug 10, 2010 12:13 PM

  • Hierarchy node text shows short text instead of medium text in WebI report

    Hi,
    We have created a simple Hierarchy suing Tx RSH1.
    US -> North Carolina
              South Carolinakey
             Rest of America
    Please note "North Carolina" is the medium text for the node while the short text which can contain max of 10 chars is "North Caro"
    We have used and activated the hierarchy within the BEx query. Text display with "Medium Text" has been enabled for the InfoObject. The display on the BW report is as expected showing the medium text for all levels and all modes.
    When a universe is built on the query and a WebI report is created based on the universe everything works fine other than than the Hierarchy text for different levels and nodes. Instead of showing the Medium text, the short text is getting display.
    We took out the text object from the Universe in the Universe designer and went ahead with the key and medium text, but that did not help.
    Is this a known bug? Is there a workaround for this issue?
    We are on XI 3.1 SP3.
    Rgds

    Hi,
    I am working on BO XI 3.1 SP2.
    I have displayed the medium text for the hierarchy nodes as:
    In my universe three detail objects(key, medium name and long name) gets generated for each hierarchy node.
    I have copied the definition of L01 Medium name (detail object) in the L01 dimension object. similarly for other hierarchy nodes.
    i.e. L02, L03.. etc.
    Now the master data which have been loaded for the medium name will be displayed.
    Regards,
    Rohit

  • Can't send texts longer than 1 line

    I have a BB Torch 9800, OS 6.0 bundle 2475.
    I can't send any texts longer than 1 line. Shorter ones i can send no problem, but longer ones just disappear when i send.
    i have removed sim/battery/re-started phone and nothng helped..
    Any advice?

    I think you will need to update the software on your phone.it looks like you have an older version on there.  You can either ask the store to update the software or you can try using the steps here:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    If you try it, please backup your data first using the desktop manager.  I also recommend that you use blackberry protect.  The link is in my signature.
    Desktop manager backup info
    http://helpblog.blackberry.com/2010/11/blackberry-backup/
    Desktp manager install:
    http://us.blackberry.com/software/desktop.html
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • HSLHSB Filter no longer working in PS CC 2014, latest build

    Dear Community:
    For me, the optional HSLHSB filter is an essential part of my color imaging workflow. I recently updated to the latest build --- PS CC 2014 to 20140730.r.148x64.
    After the update, the HSLHSB filter no longer functions properly. There is no button selection on the input side of the filter, and only a selection of the three options on the output side. The filter runs, but the source and destination can no longer be set, so the plugin is useless.
    I can get it to work in PS CC, And PS CS6 just fine, but not in the current build of CC 2014. Up until till this build, it worked just fine.
    Is there a new version of the optional HSLHSB filter that needs to be installed (and if so, where?) or is the current build just messing with the optional filters plugin?
    Pete Myers
    Santa Fe, NM

    OK, the first screen capture below is of the filter coming up after selection---note there is no INPUT MODE. The second screen capture is selecting an INPUT MODE, but then there is no ROW ORDER! Believe me, I have used this filter since it came out, so what it is doing now is just strrrrrrrrrrrrrrange! And again, it worked right up until the latest update on CC 2014.
    I am running the lastest version of CC 2014, running on 10.8.5, with the latest supplemental update to the OS.
    Pete

  • BOM Item Text/Long Text

    Hi Gurus,
    I want to change a BOM and update/create the BOM Item text/Long text. I just want to change the BOM and create an item text (If the text is more than 80 chars, then I should be able to create a long text).
    I tried using FMs SAVE_TEXT and CREATE_TEXT without much luck. Could someone throw some light on how to achieve this.
    R

    Thanks Sudheer. Yes, I'm passing the correct parameters. Please see below.
            CONCATENATE sy-mandt ls_stpo-stlty ls_stpo-stlnr
                                     ls_stpo-stlkn ls_stpo-stpoz
              INTO lf_tdname.
              CALL FUNCTION 'CREATE_TEXT'
                EXPORTING
                  fid       = 'MPO'
                  flanguage = sy-langu
                  fname     = lf_tdname
                  fobject   = 'BOM'
                TABLES
                  flines    = lt_lines
                EXCEPTIONS
                  no_init   = 1
                  no_save   = 2
                  OTHERS    = 3.
    The thing is that it should save the text in Line1 and line 2 of the item text if the length is less than 80. I assume that the TEXT Fms will do it for me. Please correct me if I'm wrong.
    I have also tried a direct database update by changing the stpo-ltxsp field. No luck again. Did someone has updated/created the text using this method ?

  • Long short short beep code then no boot when trying to reboot???

    I recently ran the recovery CD to get it back to factory condition and the same problems persisted (that I'll describe below) which indicates to me that there's some hardware issue. I've had the same issues before and after recovery was run.
    When I start it, it often starts just fine as long as it hasn't been on for at least an hour.  It seems to have memory management issues.  It hangs up, gets bogged down easily, hangs, crashes, etc.  It also seems to run hot.  There are quite a few programs that I was able to run when it was working well that it no longer tollerates. 
    If I reboot after it's been running for a while It makes three beeps (Long short short).  The screen goes black, the hard drive spins a little, but that's it.  I have to turn it off for about an hour or two before it will actually start up at that point.  Keep in mind, it doesn't start out at 100% and deteriorate.  It starts out at about 40% of what it used to do and deteriorates from there.  In needs to be rebooted about once a day. 
    Sometimes if it's hibernating, it will make the same beep code when I wake it up (Long short short) and most of the time it won't wake up from there. 
    So, can anyone tell me what that beep code refers to?
    Has anyone else experienced similar problems?
    Does anyone know which part is bad and if it's worth trying to fix it? 
    Thanks!

    I am having the same problem....i do believe its a memory problem..??

  • Work Order Header Short Text & Operation Short Text Issue

    Hi All,
    There is one issue while creating the work Order through IW31. When I put the Header Short Text same short text is transpose in to the First Operation short text as per STD SAP behaviour but if I change First Operation short text in creation(IW31) and save and come back in IW32 or IW33 it is showing the same Header Short Text  but not changed one.
    Why it is so???
    I  Want to Edit the First Operation short text in IW31 only not in IW32.
    If anybody have explaination on this please let me know.Its SAP BUG????
    I am Using ECC6.0
    BR
    Rakesh

    Hello Pete,
    No i don't want same short text at Operation short text. Actually when i am in TC IW31 creating Order By default Header Short text is transfer to Operation Short text as per SAP STD functionality when at the same time i change the Operation short text and save and come back and see the Order in IW33 & IW32 i am not able see the changed Operation short text which i changed at  IW31 while creation of order.It showing the same short text of order Header .Why so.......????
    BR
    Rakesh

  • How to clear the previous  filter text when creating new record??

    Dear All,
    my question is i i created table having filter and sorting.
    when i m searching data through filter text data is coming but i want to clear that text(filter text) when i am creating new record.
    for my case when i am creating new record all blank field is coming but in that filter text box previous data is coming which one i was searching.
    but i need when i will create a new record tat filter text should be clear.
    Thanks
    Damby

    Damby, please tell us your jdev version.
    Check my blog http://tompeez.wordpress.com/2011/10/29/jdev-how-to-reset-a-filter-on-an-aftable/ you can add this to the button you use to create the new record.
    Timo

  • Apple Cinema Display 23" - Blank Screen, "short-long-short" LED code

    Hello everyone.
    This sounds like something of an epidemic... My Apple Cinema 23" HD Display (bought Dec. 2007) hasn't been turning on after a power outage hit our area last week.
    The Computer and Display were OFF when the outage occurred. Everything was plugged into a surge suppressor. Everything ELSE plugged in to the suppressor is fine (including my Mac CPU)... but not the monitor.
    It’s not dead-dead…. It’s a blank screen but there IS a morse-code flash on the LED (short-long-short). According to Apple Support’s LED Translation, it SHOULD be something to do with the power adaptor. The adaptor IS correct… a 90 watt… but just in case I bought ANOTHER 90w adaptor brick. I plugged the monitor to the new brick. THE RESULT WAS THE SAME.
    I’ve tried power cycling, I’ve tried plugging it into different outlets, I’ve tried connecting to other computers. The same LED result remains.
    And, yes, of course, I’ve got no Apple Support, and from what I read in similar posts, outside-the-warranty repairs could hit around $400. I REFUSE!
    For now I have a Samsung monitor from Costco. It’s not bad, but it’s not the Apple monitor with its awesome color-fidelity.
    I've read some other posts with the same problem (LED blink code and all) elsewhere but haven't got a solid answer.
    I wonder… has anyone else incurring this same problem (with the same LED flashing deal) tried to use a 150-WATT adaptor brick? I would try this myself, but I’m currently financially unable (and personally unwilling) to throw more cash at this problem unless I know it’ll fix it.

    Hi all!
    As mentioned on the title of this topic *I HAD THE EXACT SAME PROBLEM* with my 23" Cinema Display...
    Before the failure, the monitor *WAS IN PERFECT CONDITION* (trust me when I comment this, my whole life is in front of a monitor)
    *THE PROBLEM SHOWED UP THE DAY I MOVED THE MONITOR TO AN OTHER OFFICE* (???). Please note that *I TOOK EXTRA CARE WHEN I MOVED THE MONITOR*, besides, when something costs around 1K you owe to.
    *I TRIED AN 150W ADAPTER ON IT AND WORKED FINE!!!* Just like before.
    But since *IT WAS UNDER GUARANTY* I sent it to the local distributor who eventually *REPLACED IT WITH A "NEW" ONE*, which after remarks from my side it turned out it wasn't "new" but re-manufactured by Apple (off course, he guarantied me the parts in it, where brand new and had 0 hours of usage).
    In my question to the technical representative of Apple *"WHAT WAS WRONG WITH MY MONITOR"*, he answered me that *THE INVERTER WAS FAULT*.
    After that I questioned him *"WHY MY MONITOR MANAGED TO WORK WITH THE 150W ADAPTER?"*, he answered me that *THE EXTRA CHARGE OF THE 150W ADAPTER WAS ABLE TO "EXCITE" SUCCESSFULLY THE FAULTY INVERTER IN ORDER TO WORK* and that *IT WAS A MATTER OF MONTHS FOR THE MONITOR TO FAIL AGAIN*.
    That's my story... I hope it may help some of you... Personally I can't have an opinion on the matter, since I'm not a technician. The only thing on which I can comment is that *A 1K MONITOR SHOULD BE WAY MORE DURABLE AND TOLERANT WHEN YOU TRANSFER IT AROUND (if that cause the problem of course)*

  • Matching Long & Short Position in Futures

    Hii Experts ,
    We are working on Futures in SAP ECC6.. There is a function of Matching Long & Short Position in Sap ,The function generates matching business transactions to which the corresponding margin flows are assigned, which i got to know from help.sap.com.  & following is the link
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/47/060cdb0d5e2ecbe10000000a11466f/frameset.htm
    The problem is that i am not able to see this path in my SAP.
    Please help  how this functionality can be used in SAP.??
    thanks & regards
    Saurabh Gupta

    Hi,
    ...one hint regarding the usage of TPM91:
    In customizing you need only "Open" Transaction Types, because the Matching-functionality cannot differentiate between open and close - you just have Buy/Sell Open (...no Buy/Sell Close) Transaction Types.
    Regards,
    Lorenz

  • HT2811 If the display flashed short long short could the power supply be bad?

    If the display flashed short long short could the power supply be bad?

    Hello,
    In order to determine what might be going on, I am going to need a little more information about your setup such as:
    -what version of the cFP drivers are you using?
    -where/what device are you outputting voltage to? at what voltage? how much current do those devices require?
    -could you explain further by what is meant by '[at] approximately 30 seconds, all channels on that PWM shut off'. Are the lights on the modules still illuminated when the system 'shuts off' or do they remain on?
    -Do you have another power supply you could try this with?
    -Does the power supply meet the specifications for use with this module per p. 4 and 5 of the FIELDPOINT AND SPECIFICATIONS™ OPERATING INSTRUCTIONS FP-PWM-520 and cFP-PWM-520  Eight-Channel, 5 V...
    -Does the power supply continue to output 24VDC even after the 'shut down'?
    Regards,
    National Instruments
    Applications Engineer

  • HT2811 So, my cinema display is sending short long short...

    Okay, so my cinema display is sending short long short. That means I have a pwer supply probem, apparently.  But I have two screens and so can swap over the power supplies; the one giving the error message continues to err, so the fault is not with the power supply but with the screen itself, right?
    The screens having been working perfectly for years (five?). All I did was carry them between buildings. A static charge is a possible occurrence here in a dry part of China. The screen has working ports - the keyboard I am using is driven by the faulty screen (the screen procaliming a fault, really).
    What am I missing? I'm out of ideas - and, being China, help is a long way off.

    You uhave to buy a 150 Watt power supply to make it work again. its a well known problem.

Maybe you are looking for