BEx front end version problem

Hai everybody,
I am trying to edit an existing query. When I open the query designer( from excel sheet) I am getting the following error message is appearing.
The component was edited with a more recent version of the editor. You also have to use the more recent version further. Further processing not possible. Update your fron end"
There is only "ok" and when I clik on ok, the designer closes.
What does this mean? Is it taking about BW version or what is it? I have it edit the query but its not letting me to. Any help is highly appreciated.
Thank you very much.

Hi Visu,
somebody has developed the Query you are trying to modify with a newer Front End Version. So you need to have the same or higher Release / Patch Level.
To download Patched go through:
http://service.sap.com/swdc -> Download -> Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> ...
Hope it helps
GFV

Similar Messages

BEX Front end issues in sap netweaver 2004s

We have problems with accessing SAP NETWEAVER 2004S BEX tools(BI7.0).
We have the following softwares installed:
SAP_BW SAP NETWEAVER BI7.0 SP 10(SAPKW70010)
SAPGUI6.40 PATCH LEVEL 22
Microsoft office 2003
.NET version 1.1
Microsoft VJ# 1.1 Distributable package
We are having the following issues in each components:
1.BEX ANALYZER:Unable to open the reports.Getting the error message that
"Critical error occured.Program needs to be closed.Refer the trace file"
2.Report Designer:component Bex Report Designer avilable verion 59, Version 132 required.Before you can continue you have to run the front-end setup"
3.BEX WAD:Unable to save any web templates.Getting the following error message.
"E002 Error While Executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1()"
In BI front end check tool for PC not showing any red files.But it showing Blue color for some of the microsoft dll's.
Please help us with your inputs..
thanks in advance
Soujanya

Hi Soujanya,
This is known issue in BEx tools in this latest release.
We got the same problem and still facing.
We are using BEx 3.5X to access all reports.
Install BEx 3.5 too. Then you get two sub menus to access BEX tools.
Make sure that you open reports in 3.5 BEx Analyser.
I think all reports, which you tried to open in BEx(BI 7.0) are corrupted. try to copy to your datatargets/install (if they are BI Content Reports).
Good Luck,
Anand.
Pls give points if this is useful

New front end editor problem

I'm quite new on this forum, so don't be so angry if I'm asking about something that someone else was asking for, by i didn't found answer on my question.
So...
In my company, administrator made some updates in 4.7, after that updates new front end editor is avalible (this with code colorin, code hinting, code folding etc).
But I have some problem with keyboard mapping scheme. When i try to save my own setting or change keymapping to another one, SAP stop responding (it's not a crash with short dump but simple aplication freezing). I tried to find some solution to this behaviour but I didn't found it yet.
My question is:
1) Did someone else have the same behaviour as I?
2) Where to find SAP notes about front end editor?
Thx in advance for any help

Keymapping settings in file:
C:\Documents and Settings\<username>\ab4_data\keymap.xml
You should also check the following dir:
c:\Program Files\SAP\FrontEnd\SapGui\ab4_data\
During patch installation this dir is overwritten, and during the first use of the new editor, the files from here copied to the <username>\ab4_data dir, where you can change them.
Might be permission problem, I can imagine, that if you have no authorization to change these files, the GUI starts hanging or chrashing.
Peter

SAPGUI 7.10 New ABAP Front End Editor Problem with CTRL + 5

Hi Guys,
I am using SAPGUI 7.10 patch 19 with new front-end editor and I am not able to use CTRL + 5 (on Numeric pad) to select whole program. As soon as I change the editor to use old front end editor I am able to use CTRL + 5.
Please help me to incorporate CTRL + 5 in New frond end editor.
Thanks,

Try <ctrl>+a
Regards, Uwe

Front End Replication Problem

Have Lync 2010 enterprise with a front end pool containing 2 physical servers. When logging onto the front end pool control panel I noticed that
any changes made were not being stored.
When running the command
Get-CsManagementStoreReplicationStatus -CentralManagementStoreStatus I can see that front end Server A is the active master & is heartbeating fine. On the list of active replicas the name of front end server B is not in there, whereas
our exchange & archiving & monitoring servers are.
Unless I invoke replication manually nothing is replicated across the front end servers.
When running the command
Get-CsManagementStoreReplicationStatus everything shows as true including server B, yet only at the time & date that I invoked replication.
Any ideas what could be causing this issue all of a sudden?

Check REPLICA service is started on Server B.
Check the folder is empty under the path C:\RtcReplicaRoot\xds-replica on Server B.
Check if you can find any error on Server A that hosts the CMS.
Lisa Zheng
TechNet Community Support

ECC6 ABAP Front-end editor Problem

hi all,
We are using ECC 6. when we switch to old editor form setting options it works fine but when we switch to New editor it hangs itis not opening.
Latest Patch is also installed.
Pls suggest what is the problem........how to rectify it...
Thanking you
Edited by: Hemant Baviskar on Jul 5, 2008 12:12 PM

Try logging in your pc as Administrator.
Then log in to SAP and try the Fron-End editor New option.
Hope it works for you. I had the same problem and logging in my pc as Administrator solved the problem.
Regards,
Vinod.

BI 7.0 front end installation problem

Hi Gurus
When I click on the Business Explorer -> Analyzer 7.10
It opens up MS Excel but when I click on the connect tool icon the sapgui connect does not showup
We are on SAPGUI 7.10 patch 03.
Also from the query desiger ,when i go to View>>>standard toolbar>>>
I can only see 2 tool bar
1.Standard
2.View
I can not see "Quit" so I am not able to execute the query .
Would you pl advise which SP or OSS we have to apply?

hi,
check the MS Excel version..it supports from Excel 2003. plus u have to put one more patch for BI report available in service.sap.com

SAP GUI front end version

Hi all,
We have upgraded our system to Basis 740.
When using in the past release Basis 700, we use sm04 to check the SAPGUI version.
Now, with 7.40 there's no information about SAPGUI version, have you any idea how to have this information.
Thanks.
Regards,
Aziz.

Hello Aziz,
this column has been removed from SM04 between SAPKB740/00 and SAPKB740/07 due to security reasons.
This column has been added again in SAPKB740/08 - so if the SAP GUI version is needed, a KB upgrade is required.
Please see SAP KBA 2004293 - "EHP7 - SM04 missing GUI-Version information" for more information.
Until SAPKB740/04 the Report RSM04000_ALV also displays the GUI version. Unfortunately this Report was deleted in SAPKB740/05.
Regards,
Laszlo

Front-End Patch

Dear Gurus, what's the best way to know what current front-end patch is being used here at the client's site. In Query Designer, if I click on About, ti just gives the version of SAP NetWeaver.

Are we talking about the BW Addon For SAPGUI FEP?
There are couple of way:
- BW 3.5 Addon for SAPGUI (6.40) FEP 13 is most current
- BW 3.5 Addon for SAPGUI 7.10 FEP 2 is most recent (For site running BEx 3.5 with a 7.0 BW.
- BI 7.0 Addon FEP - not using it just yet, not dure what the most current version is - it has some different numbering arrangement
1) If you are running 3.x and using the Bex Browser, the splash scrren on startup (think you also bring this screen up from one of the Menu options too) should have the BW FEP e.g. 3500.7. (plus some othe nbrs) is BW 3.5 Addon FEP 7
2) In the BEx Analyzer in 3.x (didn't see it in BI 7.0) one of the options somewhere under the Business Explorer Menu is an option called Installation Check. This opens the sapbexc.xla, which should open a workbook that has a button (not sure what it's called, something like Run Check) - press the button and it collects teh version info of all the BEx front end components and tells you if they are curent, missing, old.
In 3.5 for SAP Gui 7.10, you need to llok for something like sapbex350710c.xla.
There's one for 7.0, but not sure what it's called, try a search for *c.xla.
I think checking the logon pad provides teh SAPGUI FEP version info, no tteh BW Addon FEP. A frequent area of confusion as SAP doesn't do a good job explaining these items.

Front end Exceptions is not working

Hi Experts,
Front end version BI7.0
I have a below scenario:
There are two calculated Key figures in my query ,lets say A & B.
I have to show CKF A in RED if A is greater than B.
To achieve this above ; I have created a formula KF to compare A & B.
The formula will give either 1 or 0.
1 - If A is greater than B ,else 0
Then i created a new exception as below:
in General tab - Alert level : Bad3 Equal = 1.
Definition tab - Exception is defined on Turns = formula KF
Display tab = Excpetion affects data cell and selected following structure element = and selected KF A
Cell restriction tab = Exception affectes everything
But this exception is working only for formula KF and making RED only to formula KF..But it is not working on KF A...
And CKF A is not shown as RED ?
Please let mw know what i have missed?
Or Is there any other way to get this?
Thanks..
Naween

Hi Naween,
I dont thin so you did any mistake . For all three figures , A, B , KF the scaling factor and decimal places should be same. inshort the properties shouls same .
while testing this plz do not hide the KF .
hope this will help you .
Regards,
Aparna

BI Front end Bex analyser problem.

Hi ,
I couldn't able to open bex analyzer in BI 7.0.
My basis team has followed all steps,but i couldn't able to open BEX tool bar in BI 7.0.
I can able to create query in BI 7.0 .
Kindly suggest me .
thanks,
Vijay.

Hi Vijay,
The scenerio refers to GUI or Installation problems.
I suggest you to go through with these following SAP Notes:
1025122
1050605
also check your Front End installation as per Note 197460.
Regards
Vivek Tripathi

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

Problem in Front end with BW3.5

hi friends,
now I am using BI 7.0 with front end BW3.5, it looks good. when i open the BEx, it didnot work...I think there is a component missing... If i use BI 7.0 as front end, I know that will be work.... I want to call BEx from citrix environment.... how can i find what component is missing, and how can we solve this problem...
I want to get solution with BW 3.5 front end... please guide and help me....
with hopes,
Jaya
Edited by: jaya durai on Jul 24, 2008 3:41 PM

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

Problem with CRM 2011 web front end cluster

Hi.
We have a CRM 2011 (RU17) environment with a SQL DB server and 2 web front end CRM server in a cluster.
Since few days (about 10) it seems that one of the 2 nodes is not working, and since yesterday many users report access problems when calling the application by cluster name - as usual since we deployed CRM 1 year ago.
I tried myself, and I can run the application by cluster name without problems. If it try the separate notes addresses, one of them works, the other doesn't.
I checked the 2 web front end servers, and are (or seem) both properly configured, with all patches installed.
Following the information I got from Event viewer. Any suggestion welcomed!
Many thanks and Best regards
On the 'faulty' server I have different errors at event viewer level:
Faulting application name: Microsoft.Crm.Sandbox.HostService.exe, version: 5.0.9690.4150, time stamp: 0x53559982
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0x6f8
Faulting application start time: 0x01cf8f93aa9a7ff8
Faulting application path: C:\PROGRA~1\MICROS~4\Server\bin\Microsoft.Crm.Sandbox.HostService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f5019a68-fb86-11e3-9f21-005056853970
Application: Microsoft.Crm.Sandbox.HostService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
The Sandbox Host service has encountered an unexpected error and has stopped.
Source: Microsoft.Crm.Sandbox.HostService.exe (1784)
Error: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Crm.SecurityUtils.GetSidFromAD(Guid objectGuid)
   at Microsoft.Crm.Sandbox.SandboxHost.SetPrivilegeUserGroupId(Guid privilegeUserGroupId)
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(Object stateInfo)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
On the 'running' server event viewer I only have one error, related to mail router:
#23379 - Could not verify the version of Microsoft Dynamics CRM at http://alkcg106.d30.intra:5555/AkzoNobelIndustrialCoatings. There was no endpoint listening at http://alkcg106:5555/AkzoNobelIndustrialCoatings/XRMServices/2011/Organization.svc that could
accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.

Apologize for not having indicated here the resolotion I got thanks to MS support...
We enabled the trace and we got
a http error page stating maxQueryStringLength was insufficient. We changed the maxQueryStringLength and QueryString values in the CRM web.config value to 10240.
We also noticed an error related to the DC being unavailable. We checked in the CRM registry hive and see in the non-working server you had a PreferredDc key pointing to “AMDNAD”. On pinging
AMDNAD we see it is not reachable. We removed the PreferredDc key and after iisreset we can navigate to crm.

Java Front-end problems with Windows 200 Pro

Hi,
I have some problem on my pc with java applications front-end. I have windows 2000 Professional and use java(TM) 2 SDK, Standard Edition Version 1.3.1
Using every java applications (also development environment as JBuilder 4 Professional and Together 4) I have always problems with front-end: the text is bad visualized everytime I use the scroolbar, menu items into a menu are bad visualized while I drag over of them the mouse and so on...
To try to solve this my problem I have just installed Service Pack 2 for Windows 2000 Pro but I have not had good results - I keep to have the usual problem.
I'm aware that it is difficult to reproduce and however if anyone has some idea to solve my problem I am opened to every suggestion.
Thanks in advance

the text says that what technolody that they are using its called "Off Screen Images" once i used them in my applications to improve the prefomance.
What they says is to improve the time it takes to display componants that display text on them (Such as buttons, Labels...) they going to create an Off Screen Image of the text and then paste that image on to the screen whenever the componant has to be displayed/Re displayed instead of redrowing (Re rendering) the text on the screen repeatedly which take more time and processing power than rendering once and paste it to screen whenever needed but this solution will take some more memory.

BEx front end version problem

Similar Messages

Maybe you are looking for