BEx Get Data Issue

Hi everyone,
The basic issue is workbook is not retrieving the data back from the cube.we want to know how to check like why it is not retrieving data .
Is their any settings for this in back end, how to check and any procedure to find out?
There are two formulas here BEx Get Data and BEx Set Data.
BEx Set Data is used to push the data into the cube from workbook.
Bex Get Data is for getting the data from cube into workbook.
so when users enter some values ,it is going into the real time cube in the backend but next time when user cums into the workbook he is not finding the last inputted data.it is supposed to go to the cube and then *** to workbook again because next time when user enters the workbook he should see last inputted data.when he enters some values in cube and saving it ,it is going into the cube but it is not coming back to workbook again.
Can anyone throw some light on how should I proceesd and find where the issue is. I want to know the Flow from Workbook using BEx Get Data , how does this formula interact with BI REal Time Cube.
Regards,
Ak

Hi,
I'm not sure what do you mean by these.
Is their any settings for this in back end, how to check and any procedure to find out?
There are two formulas here BEx Get Data and BEx Set Data.
BEx Set Data is used to push the data into the cube from workbook.
Bex Get Data is for getting the data from cube into workbook.
Are you trying to write data back into cube through input ready Query? Are you using Web or BEx analyzer?
could you please provide more details on your requirements..
Balaji

Similar Messages

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

CUIC 9.1.1 Report scheduling issue - getting data only for current date

Hi,
CUIC : 9.1.1
ICM: 9.0.3
Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
There is no such issue in Publisher.
Regards,
Alag

Try this...
{TableName.DateField} < DateAdd("d", -2, CurrentDate)
HTH,
Jason

Not able to get data in production client in BEX query

Hi Experts,
I have an SD related query which is working fine in development.
in production while i run the query iam not getting data for three fields "ship to party" , "Bill to party" and "sold to party.
I am able to see the data at the cube level but it is not reflecting in the query. Transportation of this query also
did not throw any errors. Please provide a solution.
Regards,
susheeth.
Edited by: Susheeth on Aug 4, 2011 1:26 PM

Hi,
Check if the characteristics used in query are direct objects from cube or navigation attributes of any other characteristics. In case of navigation attributes you need to have master data maintained.
And as mentioned by Vamsi, check the text data maintained for 0CUSTOMER. And for checking data you can mark Key and Text option.
Regards,
Durgesh.

Data Modelling - Complex issue need to get DATE values

Gurus and Experts
I have a situation where i have a infoobject-A which is char having value 10.
I always get the values to this infoobject as 0001032008 from the source system
means 0001 is constant
and 032008 is month and year
Now i want to use this as a dynamic query where user enters 0001032008 it should get values for T+23 months
where T = 0001032008 and T+23 would be 0001022010 (or february 2010) in short.
I get only make this work if i can use this infoobject to mapto 0calmonth and in query use variable for offsets with range as T to T+23.
Steps would be
1)Create infoobject -B ,reference it to 0CALMONTH
2)In Transfer structure ,take always last 6 values ,so we get date as 032008
Now the 0CALMONTH always work with value such as 200803 and not 032008 ,so how would this work ,so will this solution work ,how to achieve this complex logic.
Or is there any other alternative best simple solution
please help
thanks

Hi
Sometimes what seems complex can be solved by going back to the root.
Let me explain:
Your source system sends you an information with a format 0001MMYYYY. If I catch you, you created an IO to get the information as a master data. That's fine.
But your aim is to interpret your source data as 0CALMONTH. So I suggest that you add 0CALMONTH in you Transfer rule, feed 0CALMONTH by ABAP code in the transfer rule to extract the information from your source system.
If you want, you can keep the original IO, but I do not know what you can do with it....
If you took BW310 course, your problem looks like the first exercise where you play with the cost center comming from another source system.
May be I did not catch everything but it is getting late for me
Cheers
PYG

DropDrown unable to get data in ALV

Hi,
I'm trying to put an dropdown by key (or index) into an ALV but I'm unable to get data in the dropdown. Can someone please help me with this?
I was watching this threads on topics at the forum, but I can not solve this problem.
Copy my code.
DATA: lr_col                            TYPE REF TO cl_salv_wd_column,
             lr_dropdown                  TYPE REF TO cl_salv_wd_uie_dropdown_by_key,
             l_cmp_usage                TYPE REF TO if_wd_component_usage,
             l_alv_model                   TYPE REF TO cl_salv_wd_config_table,
             l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table.
l_cmp_usage = wd_this->wd_cpuse_doc_measure( ).
IF l_cmp_usage->has_active_component( ) IS INITIAL.
    l_cmp_usage->create_component( ).
ENDIF.
l_ref_interfacecontroller = wd_this->wd_cpifc_doc_measure( ).
l_alv_model = l_ref_interfacecontroller->get_model( ).
l_alv_model = l_ref_interfacecontroller->get_model( ).
l_alv_model->if_salv_wd_table_settings~set_read_only( abap_false ).
lr_col = l_alv_model->if_salv_wd_column_settings~get_column(
    id = 'VALEUR_DIFF' ).
CREATE OBJECT lr_dropdown
    EXPORTING
      selected_key_fieldname = 'VALEUR_DIFF '.
lr_col->set_cell_editor( lr_dropdown ).
DATA:
lo_nd_ctx_tab TYPE REF TO if_wd_context_node,
lo_ndinfo_ctx_tab TYPE REF TO if_wd_context_node_info,
lt_value_set TYPE TABLE OF wdr_context_attr_value,
ls_value_set TYPE wdr_context_attr_value.
ls_value_set-value = '01'.
ls_value_set-text = 'One'.
APPEND ls_value_set TO lt_value_set.
ls_value_set-value = '02'.
ls_value_set-text = 'Two'.
APPEND ls_value_set TO lt_value_set.
lo_nd_ctx_tab = wd_context->get_child_node( 'DOC_MEASURE' ).
lo_ndinfo_ctx_tab = lo_nd_ctx_tab->get_node_info( ).
lo_ndinfo_ctx_tab->set_attribute_value_set(
    name = 'VALEUR_DIFF' value_set = lt_value_set ).
DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
            ls_valueset TYPE wdr_context_attr_value,
            lr_node TYPE REF TO if_wd_context_node,
            lr_nodeinfo TYPE REF TO if_wd_context_node_info.
lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
lr_nodeinfo = lr_node->get_node_info( ).
lr_nodeinfo->set_attribute_value_set(
EXPORTING
    name = 'VALEUR_DIFF'
    value_set = lt_valueset
Thanks.
Matías.

Hi,
In your code, you are trying to do set_attribute_value_set twice. If you read your code carefully, you are setting the values once using lt_value_set where you have correctly filled the values. But after this, you are again trying using lt_valueset without filling any values. This is why your previous value-list gets overwritten and you see nothing in the dropdown. Remove the following lines in your code and it will work fine.
DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
ls_valueset TYPE wdr_context_attr_value,
lr_node TYPE REF TO if_wd_context_node,
lr_nodeinfo TYPE REF TO if_wd_context_node_info.
lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
lr_nodeinfo = lr_node->get_node_info( ).
lr_nodeinfo->set_attribute_value_set(
EXPORTING
name = 'VALEUR_DIFF'
value_set = lt_valueset
Please get back if you are facing any more issues.
Regards,
Nithya

Not getting data in OBIEE report while pulling columns from different DB

Hi All,
I am creating a report in OBIEE 11g which uses Table A and table B which are joined in both physical layer and BMM layer. But somehow I am not getting any data in the report where as data is actually present for the matching joining columns. However when I made one of the tables (Table A ) as a driving table, I am getting data but only with a filter applied in the report which restricts the data to few records. If the filter is removed, I get an error which is " A Drive Table join exceeded the limit of XXX backend database queries".
Could anyone tell me what can be the issue? Other than using driving table, is there any alternate method to resolve the issue?
Thanks In Advance,
Anju

The error is due to the setting MAX_QUERIES_PER_DRIVE_JOIN in the database features table that controls and tunes driving table performance. Also, try to follow these blogposts to do cross-database joins/federated queries: http://oraclebizint.wordpress.com/2008/03/19/oracle-bi-ee-101332-cross-database-joins/ and http://www.rittmanmead.com/2007/10/reporting-against-multiple-datasources-in-obiee/
Please assign points if helpful/correct.

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

How to get Date Format from Local Object.

Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web Channel

Hi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer.

Tables req to get date wise stock report

Hi
Pls advise, what are the tables req to get date wise stock report??? i don't want any t codes... i have to do with age analysis ,??
Anyone has answer? pls provide it.
Edited by: UJ on Mar 3, 2010 8:54 AM

You can take below details which help you to get the exact things..
*-- Tables delcaraion
TABLES : mkpf,   " Header: Material Document
              mseg,   " Document Segment: Material
             mara,   " General Material Data
             makt.   " Material Descriptions
*-- Types declaration
TYPES: BEGIN OF ty_mkpf,
        mblnr TYPE mblnr, " Number of Material Document
        mjahr TYPE mjahr, " Material Document Year
        blart TYPE blart, " Document type
        budat TYPE budat, " posting date
       END OF ty_mkpf.
TYPES: BEGIN OF ty_mseg,
        mblnr TYPE mseg-mblnr, " Number of Material Document
        mjahr TYPE mseg-mjahr, " Material Document Year
        zeile TYPE mseg-zeile, " Item in Material Document
        matnr TYPE mseg-matnr, " Material Number
        bwart TYPE mseg-bwart, " Movement Type (Inventory Management)
        dmbtr TYPE mseg-dmbtr, " Amount in Local Currency
        menge TYPE mseg-menge, " Quantity
        lgort TYPE mseg-lgort, " Storage Location
        pbamg TYPE mseg-pbamg, " Quantity
        werks TYPE mseg-werks, " Plant
        ummat TYPE mseg-ummat, " Receiving/Issuing Material
        umwrk TYPE mseg-umwrk, " Receiving/Issuing Plant
        umlgo TYPE mseg-umlgo, " Receiving/Issuing Storage Location
       END OF ty_mseg.
Further if you want you can play with Movement types.

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

Get data from KDE Notifications and Jobs or preliminary catching it

Hi,
I have next issue, I need in value of copying/cuting progress at Dolphin, and i can't find right interface to get it.
I found in this moment, that when copying starts, new item appears at next places of dbus:
org.kde.VisualNotifications /JobViewServer/JobView_(any number)
org.kde.NotificationHost /JobViewServer/JobView_(any number)
org.kde.plasma-desktop /JobViewServer/JobView_(any number)
org.kde.JobViewServer /JobViewServer/JobView_(any number)
but they haven't any methods for getting data.
Listed interfaces disappear with copying ends.
I can't find process that send messages to dbus for creating and manage new notification, and catch this messages.
So, does anybody knows how Dolphin communicates with Notifications and Jobs applet? and how can i get current copying progress?
I will be happy for any documentation, api.kde.org not helped me.
Thanks in advance!
Last edited by mr_bin (2011-08-18 09:48:38)

I have arch installed in two machines. In my laptop there's no problem with the notification of file transfers (although every time i plug a usb stick/disk i see a double entrty of the disk), but in the desktop machine notifications have stopped working as described above.

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

BEx Get Data Issue

Similar Messages

Maybe you are looking for