BEx: How to delete workbook?
Dear All,
We would like to delete workbooks. How can we delete workbooks without deleting containing queries? Those queries shall be deleted from this workbook but not from system.
Problem is, that we just see workbook in Metadata Repository, how can we get rid off it?
Thanks all for your help.
Have a nice day.
Stefanie
Hello Stefaine,
Please follow the steps mentioned below.
Transaction - Se16
Table name - RSRWBINDEXT
Enter the workbook id/ Title(workbook name) of the workbook.
Execute.
Workbooks will be listed based on the entered text.
Select the check box against these workbooks and select Table Entry --> Delete from the menu.
The selected workbooks will be deleted.
Hope this information helps you.
Regards,
R.B
Similar Messages
-
How to delete a workbook in Bex created by other user
Hi,
I had a query in BW,My requirment is to delete the query.....when i tried to delete the query the system is not allowing me to delete as some one created a workbook on that query
When i tried to access the workbook in query designer find option i can't able to locate the work book...
Please advise on how to delete the workbook and then the query
i got sap all authorisations
ThanksHi ,
RSZDELETE tcode is used to delete the query as well as work book also.
when you are deleting the query it will ask for work book also.
Thanks & Regards,
Ramnaresh . P. -
Dear All,
I am trying to delete a bex query using tcode RSZDELETE and i also tried deleting directly from table RSZCOMPDIR. i am unable to delete.....is there any other option??????????/
Regards,
SV BHALAJIAre you sure there are no work books build on this query and check if any of the other query variables etc are used in your query which you want to delete?
1. use transaction RSZDELETE
2. run program COMPONENT_REORG
3. go to query designer open the query and say delete.
To delete workbook .......SE37 > RRMX_WORKBOOKS_DELETE, but to use this you will need to technical names of the workbooks. -
How to delete more than one workbook from command line
Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
AlexHi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael -
How to delete a workbook in Discoverer 10g
Hello guys,
Does anyone know how to delete a workbook from Discoverer 10g? I created a report in Discoverer Plus as SYSADMIN and gave this to my user. My user only has access to Discoverer Viewer. He went and did a "Save As" on this report. Now when he loggs in to Viewer again, he sees two report. One created by SYSADMIN and the on he created. I want to delete the one he created. How do I go about doing this? Can I do it from Discoverer? If so, which one(Viewer or Plus)? Will I have to login as him to do this? Please advise.Hi,
I'm sorry for the question but you said:
You just login as the user into viewer and delete the workbookWhere do you see the option to delete from the viewer ?
To delete/ manage workbooks you need to login to either Plus or Desktop versions.
And yes you need to log in using the owner user name
Tamir -
How to delete Individual sheet in a workbook
How to delete a particular sheet in a workbook?
One nice tip which might probably work:
Activate Macro Recording and then delete the sheet manually. Stop recording and take a look into the script if there are any useful entries.
Please note that i don't know if this works on deleting sheets, but this is a great approach for all ActiveX interactions with Office applications.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
How to share workbook in Bex with other users
Hi,
I need help!
When I create a workbook in BEx, how to share this workbook with other users.Hi!
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a689ae07211d2acb80000e829fbfe/frameset.htm
with regards
ashwin -
How to delete the queries in BW Production which are no longer existing.
Hi,
How to delete the queries in BW production which are no longer existing in DEV.
1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
2. I tried creating another query in dev with the same technical name and send a transport with deletion
it is not working.
Please advise me on this for any function module or any other method.
Thanks
SuryaHi,
If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
As far as your error is concerned, usually when you can delete a query using the delete option in query designer itself,
Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
Hope this will be expedite.
Thax & regards.
Vaibhave Sharma -
How to delete a query in Quality System
Hi,
I would like to delete a ZZ query in Quality sytem directly. I don't have AUTHORIZATION delete using Tcode RSZDELETE. As this particulate query not avaiable in Development system, we can create a transport also.
Is there a way to delete directly in Quality System ?
Advance Thanks,
RathinakumarHi,
If you do not have the authorization then#
goto the BEX (rrmx) and delete the query from there.
you can delete RSZDELETE or delete the entries in RSZCOMPDIR table by giving ur query as parameter.
also, check this thread:
how to delete a trasonported query?
hope it helps.
Regards, -
How to delete the duplicate requests in a cube after compression.
Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha -
How to create WorkBook and Chart
Hi Experts,
Good Morning.
I am facing big problem is How to create WorkBook and Chart in BI 7.0.
My Requirement is following below..............
1. How create work book, then how to add the Company LOGO, End of report footer message.
2. How to Create Chart, then how to design.
Please provide me Solutions Asap, its very critical issue.
Thanks & Regards,
Bharathi.
<Moderator Message: Before posting a question you should read the help as suggested in the answer you got. Additionally I would strongly recommend to read the rules of engagement. Your question violated a few of the rules like a) search the forums before posting; b) read the documentation before posting; c) do not request anything asap, nothing is more important than our own work...>
Edited by: Siegfried Szameitat on Jul 15, 2010 8:25 AMHi
1) Please check the following URL.
[http://www.researchsummary.ca/bw/Sample_Ch10.pdf]
Hope it will help you.
2) Default chart option is available in BEx please check and let me know in case any questions.
Regards
YuvaraajP -
How to delete variables in BI 7?
It's fun that the variables created by developer can't be deleted in BI 7. Dose anyone know how to delete them? ..... Any suggestions are appreciated.
Hi Kris,
It works. Thanks.
And another issue that, I can't transport the BEx reports from Dev system to Prod system in BI 7, just BEx relavant objects can't be. Do you know how to fix this issue. -
How to delete unused formula variable
Hi all,
Could any body tell me in Bex, How can I delete an unused formula variable?
thank you for the input,
PingHi Ping,
can you explain how to do it? I have the same problem.
thanks in advance.
Dimitri -
BEx: Suppress message in workbooks after growup result area
Is it possible in BEx Analyzer to prevent or to autoanswer the appearing selection box, if after query update the result area has to growup over 'query foreign' not empty cells?
In the selection box there are options, to tell BEx how to handle the used cell (insert whole row(s), move existing cells down or to right, overwrite existing cells).
How can i suppress or autoanswer (with VBA??) this selection box??
JMHi Juergen,
The answer to your question is ... not that I know of.
What I do is try to avoid this problem to start with.
The problem is caused when user puts additional entries in columns to the right or rows below the result table.
The easiest way to avoid this is to move the result table to the right, or down, and tells users to put their additional entries to the left or above the result table.
Another way to handle the issue is to "Name" (in Excel) the range that includes all of the result table, plus any additional user (or VBA) entries to the right or below so that BW will recognize all of this as if it were the original result table ... therefore, BW will delete the extra entries before attempting to rebuilt the new result table.
The Name to use depends on the local query ID. For example, if the local query ID is "SAPBEXq0001", then the Name to use would be:
"SAPBEXqueries!SAPBEXq0001"
- Pete -
How to delete file from client machine
Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah
Maybe you are looking for
-
How can i add more than 500 jPanels in a jScrollPane
Hello to all , I am facing a problem related to adding jPanels in jScrollPane. My application needs more than 500 jpanels in the jscrollpane.where in each jPanel 4 jtextboxes, 1 comboboxes, 1 check box is there.when the check box will be clicked then
-
Open Zenworks Progress window from command line?
I'm well aware of the option Show Bundle Activity for bundles, but the Zenworks Progress window gives a little more information. Is there any way to open that from a command line, so it can be used in a bundle action? I know it has something to do wi
-
Goldengate calling plsql procedure
Hi Friends , as i am new to Goldengate features i need your help on working on this task. i am actually need pl/sql procedure since i am working on Goldengate replication.in my parameter i will call this procdure .actuall requirement is like this . i
-
Order Block effecting Ship-to partner
In SAP R3E, an order block on the customer master appears to prevent placement of that partner on blocked sales document types for the sold-to, ship-to and payer partners (if not others perhaps). Has anyone tried to open this up a bit more for the s
-
Hi I'm using Logic 9 on a G5 IMac 10.7.4 2.5 GHZ Intel Core i5 Lion. I'm trying to Export a new audio file that I've recorded to a movie file which is VTS_01_1.dv. (replace the old audio). The old file is VTS_01_1.aif. That's fine I can do that but