BEx Issue - Require Help

Hello Guys,
I have 2 records in the month 7 ( 07- july ) - with time data (hh:mm)
Ex:
0CALMONTH   0CALDAY     DIFF(HH:MM)
June         2007.07.10     9:36
         2007.07.15          15:41
           result                   24:77
     Average                   12:38 ( Result / no of records )
but i need the result - sub total on 0calmonth (24:77) also in HH:MM ( 25:17) and also the average.
hOW CAN i get the result.
thanks,
Pratap.

Pratap,
If you want two different calculations types on the one key figure, you will need to add the same key figure to your report in an additional column. Change the Calculate Results As on this new column to Average. Might be worth suppressing the Calculate Single Values as so it doesn't repeat the key figures.
Regards
Gill

Similar Messages

BPC Alternate hierarchy rollup issue - require help

Hi All,
We are seeing a rollup issue on Alternate Hierarchies. We had set-up alternate hierarchies on our Country Dimension (DC) to assist some managerial reporting that is only relevant to one of our Operating segments.
To show the problem, I am listing an example of our Country dimension member sheet. I have put "**" delimiter between the pertinent values to show which columns the values land under.
ID*DescriptionPARENTH1PARENTH2FORMULAH1*FORMULAH2
MAIN_HIER*Main Hier* ** ** ** **
D1*DC EuropeMAIN_HIER* ** ** **
A*Country AD1SG1* ** **
B*Country BD1SG1* ** **
C*Country CD1SG2* ** **
D*Country DD1SG3* ** **
D2--DC India*MAIN_HIER* ** ** **
E*Country ED2--ALT_HIER* ** **
C1*Calc Eur* ** *DC.H1.D1+DC.H1.E* **
ALT_HIER*Alt Hier* ** ** ** **
SG1*Sub Reg 1* *ALT_HIER* ** **
SG2*Sub Reg 2* *ALT_HIER* ** **
SG3*Sub Reg 3* *ALT_HIER* ** **
We have our main Country hierarchy that comes under the root parent MAIN_HIER. In addition to that on our main hierarchy we had a calculated node for Calc Europe (C1) which is supposed to be a summation of DC Europe (D1) + Country E (E). We had created an alternate hierarchy to represent a breakdown by more subregions (SG1, SG2, SG3 and Country E) within DC Europe so basically the root node of the alternate Hierarchy (ALT_HIER) should show the same amounts as the calculated node C1 on the main hierarchy.
If we take a higher level Account dimension member like NET_SALES the values tie out but if we take a base member in the Account Hierarchy (e.g one representing Customer Sales), the values don't match with the ALT_HIER values seem being the wrong ones. It almost seems like the rollups of the Alternate Hierarchy are not accurate.
Could you pls. shed some light on if the dimension member set-up above is wrong from any angle.
BTW, we are on BPC 7.0M SP04 Patch 2 and SQLServer version is SQLServer 2005 EE SP3.
Your insights would be greatly appreciated. Thanks in advance.
Regards,
Abhay Shanbhag

Abhay:
Please try below...
Add "RollupChildren(Account.Hx.CurrentMember,"+") to all non-base members who don't aggregate properly under FORMULAHx. For instance, I have below hierarchy PARENTH1 for Balance Sheet Total Asset
BALSHEET
TotalAsset
-CurrentAsset
-NonCurrentAsset
If CurrentAsset and NonCurrentAsset all roll up fine but TotalAsset doesn't add up. In your Dimension, put MDX formula RollupChildren(Account.H1.CurrentMember,"+") for TotalAsset and BALSHEET under FORMULAH1.
We have this issue when we created additional hierarchies, and it took us a while to debug before I got this hint from SAP Support. Ever since it works like a charm =)
Hope this helps
Brian

Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYS

THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS...

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Why does my ipad2 no longer receive photos on iMessage? Iphone works perfectly with iMessage photos. Ipad2 used to work fine. Is it an ios8 issue? Help!

Why does my ipad2 no longer receive photos on iMessage? Iphone works perfectly with iMessage photos. Ipad2 used to work fine. Is it an ios8 issue? Help!

Hello,
Where may I be able to contact and speak with a prepaid representative? Strictly through phone calls? (I am at work 12 hours a day)
And I apologize for posting in the wrong area - I saw Apple support so I went here.
I'm almost certain my phone is the problem. I have gone through resetting the network settings a dozen times on my phone, even did it on my dad's. Now my texts are beginning to do the same when I text my fiance.
Resetting the network settings DOES work -- the problem is it will work for a day or two or for only a few hours - then I'll have to do it all over again.

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

Required help for a query

Hi All....
Required help for one more query.
I have a table with data like this:
Cust_id Transaction_no
111 1
111 2
111 3
111 4
111 5
111 6
222 7
222 8
333 9
333 10
333 11
333 12
I wrote the following query :
select cust_id, ntile(3) over (order by cust_id) "Bucket" from trans_detls
The output is like this :
Cust_id Bucket
111 1
111 1
111 1
111 1
111 2
111 2
222 2
222 2
333 3
333 3
333 3
333 3
The problem is that I dont want the cust_id to overlap in buckets. That is one cust_id should be present in only one bucket.
Is this possible?
Thanks in advance.
Ameya

Or Something like..
SQL> select * from test;
        ID         NO
       111          1
       111          2
       111          3
       111          4
       111          5
       111          6
       222          7
       222          8
       333          9
       333         10
       333         11
       333         12
12 rows selected.
SQL> select id, ntile(3) over (order by rn) "Bucket"
2 from(
3      select id,row_number() over(partition by id order by no) rn
4      from test);
        ID     Bucket
       111          1
       222          1
       333          1
       111          1
       222          2
       333          2
       111          2
       333          2
       111          3
       333          3
       111          3
       111          3
12 rows selected.

HT4561 After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)

After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)

What I ended up having to do was open up the Font book & remove duplicates. I knew it was Arial that was causing the problem, so I deleted the duplicate of that font. Inadvertantly I deleted all the Arial regular font, so I had to reinstall one copy. That was the solution. Thanks!

Required Help and Documentations for following Scenarios. URGENT

Hi every one,
I require help and materials for following scenarios:
<b>1) RFC to IDOC
2) JDBC to RFC & IDOC
3) Mail to File
4) HTTP to RFC, JDBC & IDOC
5)WEB SERVICES to RFC & IDOC
6) IDOC to ABAP proxy
7) Java Proxy to JDBC</b>
my email id: <u>[email protected]</u>
urgent plzz help me...
Message was edited by:
satish c

Satish,
I would suggest to go through sravyas weblogs where she has given all the links to all the scenarios:
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
Also check this weblogs which they have explained with some scenarios:
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
---Satish

Required help on setting up blaze DS.

Hi,
Required help on setting up blaze DS.
I have Blex builder 3 and Blaze DS turnkey version.
Would any one help me in setting up the java application on Blaze DS.
Do i require to place Blaze DS and flex(client code) on same system.
As of now i have Blaze DS on my local system and Flex on one of test server.
Thanks in advance
Regards,
Anil

Thanks, one question, i have downloded Blaze DS turnkey version, could not srtart tomcat which is in Blaze DS.
Hence making use of tomcat installed on my local system which is works fine. In order to settup Blaze DS i copied required jar files from Blaze DS and flex configuration files(xml files) .
However Flex Builder3 is installed on one of test server, when i tried to create Flex project i could not validate Server location.
Is it required to have both Java server and flex builder on same system?

I require help with my first website

As you can see from many of my recent posts, I am new to web development, and I have decided that I am going to need some help.
This forum has been a huge help, and I will continue using it, but the reality of the situation is that progress is slow as I am learning as I go, each junction I reach and require help with is holding up progress, which wouldn't be a problem if I had more spare time, but I simply don't.
Is anybody willing to help me? It would be paid work so I would need to discuss how this would work with rates etc... here are some details:
The domain is already setup, and you can see the first page I have been working on here: http://www.elliotnewman.com/index/test7.html
The closet website I can find for your reference is: http://www.jaspaljandu.com/home/
My site will initially not be quite as established as Jaspal's, but in essence the functionality will be similar. The things I know of that I will need help on are:
Setting up the ordering and payment process when a customer wants to order a print, including automated email notifications, and check out forms ( this may also require membership fields or maybe through paypal)
Setting up the interactive framing graphics - ref - http://www.markgray.com.au/gallery/limited-edition-prints/forgotten-island.php
Potentially helping to setup a blog
Work with me on integration - and updates (ie build the all the templates needed so updates and new images can be posted by myself easily)
Automation of the counts of the limited editions
Setting up links to Facebook, twitter, linkedin etc
Reviewing and testing any code that I create
Along with these points I will also need standby help with the code I am directly working on, so file sharing may have to be setup. It is also worth noting that I will supply all the graphics and the design elements for every page, I will also be very specific with briefs as I know exactly what I want to achieve.
If anybody is interested please send me a private message, I would need to see some examples of your experience, details on your availability and your rate - whether thats per day, per hour and a rough estimate on how long you think the work will take.
Also, if anybody knows somebody outside this forum that you think could help me then please also forward this on.
Apologies if this is not the best place to post this.
Elliot.

Hi
In addition to Nancy s comments, reading the following line -
Along with these points I will also need standby help with the code I am
directly working on, so file sharing may have to be setup.
What you are basically after is a tutor, to guide you in what you are doing. In this respect it may be worth your while to read-up on designing web pages,as after a quick glance of the code, (from your previous post regarding the background image ) the main problem you are having is that you are not 'implementing' a consistent design/development procedure.
Try reading the following -
General tutorials on html, css, etc - http://www.w3schools.com/.
Design of web site, general - http://articles.sitepoint.com/article/principles-beautiful-web-design.
PZ
www.pziecina.com

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

iPhone, iPad, or iPod touch not appearing in iTunes

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out!!!

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP

Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ISSUE-PLZ HELP

When the user Miro Generating:-
1. Give the Ref.No.Business places,
service Sheet No.
and the G/L No.. its take in production server,
But here actual its upated Medical Aid,G/l
But its comes in Rawmaterial exemption,account i.e not relevant account
actual Here its comes in G/L medical account
How its overthe issue plz help for me.
2.In before indevelopment server do that same thing in DEvelopment server, its Give the Error mesage i.e DELIVRY NOT SERIVICE ETNRY SHEET ..............(number) doest not exit

Hello,
There are several public KB articles that may apply to your situation. But, rather than try and list them all here for you, I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on the exact error message and see any of the resulting articles are on point to your situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BEx Issue - Require Help

Similar Messages

Maybe you are looking for