Bex MAP - Showing 0plant

Dear all,
i have problem showing reports in plant detail.
my query is as follows:
country plant quantity unit
when i have make query as: country  quantity unit (without plant) i can report query in map in wad successfully.
however when i add 0plant in to the report, it gives an error,
     MAP_ITEM_1 map item 1 does not show map layer as there are more than 1 gis-related characteristic.
how to configure wad to show country map and plants, and quantity in map?
thanks.

now, i did this,
i have two queries, one including 0country, one including 0plant.
in wad i have two layers in one map, one query with 0country, one query with 0plant,
now i can see the map and i see the legend for both country and map.
however i do not see the results for 0plant?
how come?
thanks

Similar Messages

  • How to use Bex Map??

    Hi
    I'm new to using Bex Map.
    Can anyone explain to me step by step how to use Bex Map.
    I have created a cube in RSA1 already. All the data is loaded.
    I know on the object on the business explorer tab there is things that need to be done there.
    Can someone explain to me how? The steps? Also where does one get the actual maps?
    Will reward anyone that shows me in detail how to do it.
    Thanks in advance

    Hi Louis,
    Check this link might be useful:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
    Also check these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/f405387bcc513be10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/07/79053950c48e05e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/63/79053950c48e05e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0f709eb-2bbd-2a10-7aa0-d484d344e8ec
    Hope this helps...........
    Rgs,
    I.R.K

  • BEx Map in Excel: Print only result area

    Hi experts,
    I am in BEx Map - Excel, and I am trying to print the result area ONLY, without key figures, legend and so on...
    Print Preview in Excel shows the key figures on the left, the legends on the right and a little version of the map (as if way too zoomed out) in the middle.
    I know there is a post dedicated to the "print only result area" but its solution is "web only"
    Thx,
    Olivier

    Arun,
    Attaching a map in BEx-Excel is different from attaching a chart. When attaching a map, you can't choose in which sheet/workbook the map will be displayed. A new sheet is automatically added to the workbook holding the BEx query, period.
    But thx anyway. I did try your thought

  • Switch between layers in a BEx MAP

    Hi,
       Does anyone have an idea how to switch between layers in a BEx Map? And manipulate the attributes on the MAP in WAD. I ever saw a demo of such a web template which could do that.
    Thanks,
    CK

    Hi,
    here is some javascript which might be useful in your case
    function create_checkbox(mapitem) {
       var prop = SAPBWGetItemProp(mapitem);
       if (prop != null){
          map_panel_html = "<form name="map_panel_input">";
             for(k=1;k<prop.length;k++){
                if (prop[k][0].substr(0,7) == "SUBITEM") {
                              prop2=SAPBWGetItemProp(prop[k][1]);
                              hidden = true;
                              if (prop2 != null) {
                                           for(l=1;l<prop.length;l++){
                                                  if (prop2[l][0] == "HIDDEN") {
                                                        hidden = (prop2[l][1] == "X");
                              map_panel_html = map_panel_html +
                              "<input type="checkbox" name="" +prop[k][1] +
                    "" value="" + prop[k][1] +
                   "" onClick="change_map_layer(this.value, this.checked)"";
                            if (!hidden) {
                                 map_panel_html = map_panel_html + " checked";
                            map_panel_html = map_panel_html + "> "+ prop[k][1] +"<br>"    ;
         map_panel_html = map_panel_html + "</form>";
        document.getElementById("map_panel").innerHTML = map_panel_html;          
    function change_map_layer(maplayer, show) {
       if (show) {
          location.href="<SAP_BW_URL>" + "&item=" + maplayer + "&hidden="
       else {
          location.href="<SAP_BW_URL>" + "&item=" + maplayer + "&hidden=X"
    Just add additional a
    <div id="map_panel"></div>
    <script type="text/javascript">
    <!--
       create_checkbox("MAP_1")
    -->
    </script>
    in your Web Template and  replace MAP_1 with your web item name.
    This code will check the map for its layers and you can show or hide them.
    Heike

  • BEX MAP

    Hi all,
    I'm try to configure BEX MAP to work with infoobject 0REGION.
    I have read all documentation about BEX MAP but I have a problem :
    The system don't make the link between SAPBWKEY from .dbf file and content of the query (caracteristic 0REGION).
    0REGION is a compounded caractéristique with 0COUNTRY.
    In the result of my query, I can see FR/01 FR/02 ..and so one.
    So, I have encoded FR/01 FR/02 in the admin00.DBF file and upload it in infoobject 0REGION... without success.
    The table /BI0/TREGION  contains 0COUNTRY,0REGION and language.
    Do I must specified language in SAPBWKEY ?
    Thanks in advance for your help,
    best regards
    Martine

    You don't need to specify the language in the SAPBWKEY in the admin00.DBF f
    I'm havin' a similar problem, I create a webtemplate with de Bex 3.5 and the geocharacteristic 0region display just fine in the map item, it shows all value of regions for the especific country, but it you use the  same query or view as dataprovider in 2004s it just shows a continental view, don't know what it's happening if I figure out let you know

  • In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    Hi JohnDory,
    The information side-bar from iPhoto has been removed in Photos App, and so it's been converted into a pop-up window showing both the exposure, aperture and so technical photo parameters, as well as the comments, faces and LOCATION for that photo.
    This small floating window is shown whenever you click the button in the app title bar, right clicking a specific photo or pressing ⌘i
    If you open the albums view (clicking in the name of the album list, NOT an album name, you can see in your left sidebar - which can be shown or hidden) and press ⌘i without selecting a specific photo the Info pop-up will show the map for your whole library (as well as the total amount of photos, videos, GB used, etc)
    So, I'm afraid the "Locations" view (which I really loved) from iPhoto has been ripped off... and we can only get "some sort of locations view" by this method.
    As for locations... there is no option for manual geotagging (so, setting location to a specific photography which doesn't have it yet)... that really ****** me off 
    Regards,
    braincasualties.

  • BEx Maps

    Hello,
    at the moment we are using BEx Maps (Release SAP BW 3.5; Front-End Excel 2003).
    We are facing following problem: after saving the workbook with the embedded map for documentation as a .xls file and reopening it, we get a map with default values that means a empty grey area as map without content.
    Does anybody know a solution for this problem and could help us?
    Thank you in advance.

    Ullrich,
    I dont think the SHP files get embedded into the workbook with data - if you have queries along with the map - are the queries refreshing ..
    Also try putting the map into a web template and check if the same appears the same way...
    Also what is your front end patch level ?

  • No map showing in the map app in standard view just arrows,distance and directions on grid okey in hybrid and satellite modes, ios 8 installed just the grid

    Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • When I click on my address in my contact entry Google maps show diferent point at the map

    Please,
    On iPhone 4, iOS 5, When I click on my address in my contact entry Google maps show diferent point at the map

    Do you have a WiFi only iPad?
    If yes, go to another site, like say a Starbucks, connect to their internet and click on the arrow to show your location. If it is correct then your router is reporting incorrect information. Wait and the database will eventually be updated.

  • BEx map: dynamic areas in a map?

    I have one question reg. BEx map: How could I realize dynamic areas for a map? Let's say I have a rectangular area describing some phenomenon. The end-user should be able to enter new areas.
    All the dynamic geographical types refer points, not areas. I'd like to have a characteristic describing the area (polygon).
    Any hint how I could solve it?
    Regards KB

    Timed out, close as cleanup

  • Why doesn't iOS six maps show traffic data?

    I have turned on show traffic data and the map still is without any traffic

    iOS 6 Maps' Show traffic is a bit obscure. It shows red dots and lines to show where traffic is heavy like so:

  • Went with Verizon because the rep and Verizon's coverage map showed strong 4G LTE signal at my address. Got home and discovered that the signal is nowhere near what I was shown. People have said that they contacted Verizon and received signal boosters and

    Went with Verizon because the rep and Verizon's coverage map showed strong 4G LTE signal at my address. Got home and discovered that the signal is nowhere near what I was shown. People have said that they contacted Verizon and received signal boosters and I was wondering if anyone had knowledge of this?

        jslack73,
    Thank you so much for those details. I do see that the area should have pretty good coverage. Since you have been at home have you been able to remove the sim card for a good 10-15 seconds http://vz.to/1ys6Uj0? Also, please try resetting the network settings on the phone. You can do that by going into Settings, General, Reset, and Reset Network Settings. After this is complete you would need to re-add in your wi-fi passwords. Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Urgent BEX Report Showing the Wrong data

    Hi Experts,
    In my Cube the data is available curreclty, but where as my bex report showing the wrong data.
    like xeample:
    Infocube
    Material               Plant    Year    Units  Qty
    000000000002001032     003     2006     BAG   1,500
    But in bex i took the same selection's, but it displays as
    000000000002001032     003     2006     BAG   2
      i am Unable to trace this
    any help plzzz
    Anil

    Hi,
    since Quantity(units PC??) can not be in decimals,Bex will round off 1.5 to 2 in bex report.
    Use NODIM function i.e. NODIM(Qty) instead of Quantity.
    NODIM function is available under data functions of Formula builder.
    From context menu fo KF structure>new formula>NODIM(Qty).
    or
    try by setting Decimal places to  2 or 3 in KF properties in Bex Query.
    hope this helps.
    Message was edited by: Murali

  • Maps shows incorrect postal code

    The maps app shows an incorrect postal code for my address.  It is showing the one for the block next to my house - maybe it's because I live on a corner lot.  Is there any way this can be fixed?  Google maps shows the correct postal code.

    Yes, Google maps shows the correct postal code.
    I am trying to use "remind me at a location" in the "Reminders" app.  I have two choices for my home location: one with my correct street address and incorrect postal code, and one with another address in the neighbourhood that uses the same postal code (which is correct for that street address).  I don't think there should be two addresses, but, nevertheless, I choose the one that has my street address and incorrect postal code.  The reminder does not alert me.
    I have contaced the map developers through "report a problem" in the app, but they must get many reports, so who knows how long it will take to correct the problem if they can even do it!

  • Ovi maps shows wrong mileage

    I have been using Ovi maps for 18months & find it frustrating in that it seems to show a mileage as the straight line route.
    I have just done a trip of 140 miles, Ovi maps shows it as 97milers, Google maps shoes it as 140.
    How can I get it to show the road mileage.

    I think that maybe DIYISFUN is talking about the distance from the current location to a POI. For instance, if I do a search for nearby restaurants, Ovi Maps shows the geographyical distance (the distance as a straight line) of each restaurant and not the route distance. The real route distance is only showed after the route is calculated.
    If that is DIYISFUN complain, almost every navigation systems behave in the same way Nokia Maps do, I mean, they allways show the geographycal distance to POIs and only show the route distance after a route is calculated.
    Regards.

Maybe you are looking for