BEx not refreshing data on all embedded queries:One variable, one variant:

Good day
I have the following challenge. I have created a BEx workbook and inserted one query multiple times into this workbook. I have removed the result area of each query to a separate sheet to enable the use of different filter values and to use some excel formatting to change fonts, colours etc.
I have created a ocalday variable selection to this query. The data must be displayed for the last day of each month for a period of 12 months from a certain ocalday. I created and saved a variant for this, adding the last ocalday of each month from 2009/05/31 to 2010/04/30 in the selection option of the variable, thus it looks like this in the variable selection of single values:
2009/05/31
2009/06/30
2009/07/31
Etc
Etc
I have ticked the option u201Crefresh queries when opening workbooku201D in the properties of the query and applied it to all. When the user opens the workbook, the users must select the variant on the variable selection screen and refresh all the queries.
Now, my challenge comes in where only one query is refreshed with the required dates. All the other results cannot be found and it displays the last date in the variant (ie. 2009/04/30). You need to go and refresh each query separately, using the same variant. This is time consuming as some workbooks have > 50 queries.
Thus, one query embedded multiple times, one variable, one variantu2026u2026
Why does the variant not apply to all the embedded queries when data is refreshed?
Your expert assistance will be appreciated.
Have a nice day
Cj

Hi,
When you have multiple queries in the workbook which have variables with that,refreshing the workbook,will prompt you the variable screen where you can enter the variables which can take effect in all the queries.
Go to Workbook Settings->General tab->Check Refresh workbook on Open->Go to Variables tab->Check Process Varaibles on Refresh and Display Duplicate Variables Only Once.Save and reopen the workbook.
Now it will prompt for variable screen where you ca enter the variable values which is common for all the queries.
The data will be shown in all the ANalysis items based on the variables entered for the queries.
Rgds,
Murali
Edited by: MuraliKrishnan E on Sep 10, 2009 2:21 PM

Similar Messages

Simple command to refresh data of all declared internal tables & variables!

Hi All,
I have declared many internal tables & variables in my program in declaration include.
Is there any Simple command which can refresh data of all declared internal tables & variables!
Instead of clearing & refreshing each i.table & variable i want to use single command to refresh data.
Is this possible!
Thanks in advance.
Thanks,
Deep.

CLEAR: lv_field1,
             lv_field2,
             lt_itab1[],
             lt_itab2[].
ONE simple command (CLEAR), can initialize fields, workareas, field-symbols,.... and internal tables.

How to delete all data in all tables in one time ?!

1 CREATE OR REPLACE PROCEDURE delete_all_data
2 IS
3 v_statement VARCHAR2 (200);
4 BEGIN
5 FOR i IN (SELECT *
6 FROM user_tables)
7 LOOP
8 v_statement :=
9 'delete table ' || i.table_name ;
10 EXECUTE IMMEDIATE v_statement;
11 END LOOP;
12 commit;
13* END;
SQL> /
Procedure created.
SQL> exec delete_all_data
BEGIN delete_all_data; END;
ERROR at line 1:
ORA-00903: invalid table name
ORA-06512: at "DE2.DELETE_ALL_DATA", line 10
ORA-06512: at line 1
I made the previous code , but it's didn't work with me .... any help for this problem please ?!
I'm just reminder ..... all what I need ,that delete all data in all tables in one time only .
I'm waiting for the answer ..... and thanks in advance

create or replace
FUNCTION TRUNC_SCHEMA RETURN NUMBER AS
CURSOR select_table IS SELECT TABLE_NAME AS TNAME FROM USER_TABLES ORDER BY 1;
sTableName Varchar2(128);
sUser Varchar2(128);
sConstraintName Varchar2(128);
plsql_block Varchar2(512);
BEGIN
SELECT USER INTO sUser FROM DUAL;
IF ((sUser='SYSTEM') OR (sUser='SYS')) THEN
RETURN 1;
END IF;
EXECUTE IMMEDIATE 'PURGE RECYCLEBIN';
-- DISABLE table's constraints
FOR C1 IN (select CONSTRAINT_NAME, TABLE_NAME from user_constraints where STATUS = 'ENABLED' AND CONSTRAINT_TYPE in ('P','R') ORDER BY R_CONSTRAINT_NAME) LOOP
sConstraintName := C1.CONSTRAINT_NAME;
sTableName := C1.TABLE_NAME;
plsql_block := 'ALTER TABLE ' || sTableName || ' DISABLE CONSTRAINT ' || sConstraintName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
FOR D IN select_table LOOP
--get table name
sTableName := D.TNAME;
-- clear table
plsql_block := 'TRUNCATE TABLE ' || sTableName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
-- ENABLE table's constraints
FOR C2 IN (select CONSTRAINT_NAME, TABLE_NAME from user_constraints where STATUS = 'DISABLED' AND CONSTRAINT_TYPE in ('P','R') ORDER BY R_CONSTRAINT_NAME desc) LOOP
sConstraintName := C2.CONSTRAINT_NAME;
sTableName := C2.TABLE_NAME;
plsql_block := 'ALTER TABLE ' || sTableName || ' ENABLE CONSTRAINT ' || sConstraintName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
RETURN 0;
EXCEPTION WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERROR: ' || SQLERRM);
RETURN 1;
END TRUNC_SCHEMA;
/

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

AWM maintain CUBE not refreshing data

Hi,
I have refreshed the data that feeds my CUBE and it seems as if AWM is not deleting old CUBE data, when I view the source table for the CUBE in the mapping I can see there is only 1 row but after I maintain CUBE and tick the delete dimension members checkboxes and run process immediately in this session the original data exists. Any help appreciated.
Cheers,
Brandon

hello brandon,
my solution is quite awkward but it works:
you have to maintain the cube's measure data where the result would be 0 processed data(wierd huh?).
To do that you, you can empty one of the dimension's data(members) by emptying the table/view that it is mapped to, giving you a memberless dimension. Then maintain the cube's measures(do not include dimensions). This will give you a result of 0 processed data, and all records are rejected, all the while emptying the cube.
Then fill back the table/view that is mapped to the memberless dimenstion with data again so it will have its members back when you re-maintain it, then maintain cube data again.
There's probably a more elegant solution out there, but this one works for sure.

Can not refresh data int the report...

Application on C#.
Steps:
1. Get Report without data from the database
2. Change the dataconnections in report to the current user
3. refresh data on the report (FilePath = TempFilePath)
4. Resave report file with data
5. Automatically open CrystalReportsViewer2008 and load the report
Result
On developer machine is allright, but on the user machine data isn't refreshed. Therefore CrysrtalReportsViewer2008 can't open report. It say that check the SaveDatawithReport parameter.
In process I found that in temp directory on user pc, didn't creates some temprorary files which creates on developer PC. Why? Help me please.
Sorry for my English.

There is the code of my programm
function ParseReport is refreshed the data and change dataconnections for current user
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Data.SqlClient;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO;
using System.Diagnostics;
using CRApp;
using Microsoft.Win32;
namespace CRApp
     * u041Au043Bu0430u0441u0441 u0434u043Bu044F u0430u0432u0442u043Eu043Cu0430u0442u0438u0437u0438u0440u043Eu0432u0430u043Du043Du043Eu0433u043E u0432u0438u0437u0443u0430u043Bu044Cu043Du043Eu0433u043E u0434u043Eu0441u0442u0443u043Fu0430
     * u043A u0444u0430u0439u043Bu0430u043C u0448u0430u0431u043Bu043Eu043Du043Eu0432, u0441u0433u0435u043Du0435u0440u0438u0440u043Eu0432u0430u043Du043Du044Bu0445 u0432
     * u043Fu0440u043Eu0433u0440u0430u043Cu043Cu0435 Crystal Reports
    public partial class Export2CR_MForm : Form
        public Export2CR_MForm()
            InitializeComponent();
            Start();
        public void Start()
            LoginForm Login = new LoginForm();
            DialogResult Dres = Login.ShowDialog();
            if (Dres == DialogResult.OK)
                if (Login.GetConStr().ToString() != "")
                    GetReportNamesFromDataBase(Login.GetConStr());
                    SetConnectionString(Login.GetConStr());
                    this.CenterToScreen();
                    Visible = true;
                    Login.Close();
            else
                Login.Close();
                this.CenterToScreen();
                this.OnClosed(null);
             * u041Fu043Eu043Bu0443u0447u0430u0435u043C u043Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du044Bu043C u0444u0430u0439u043Bu0430u043C
            TempFilePath = Path.GetTempPath();
         * u041Au0440u0438u0441u0442u0430u043Bu043Eu0432u0441u043Au0438u0439 u0432u044Cu044Eu0432u0435u0440u043Eu043A
        CrystalDecisions.Windows.Forms.CrystalReportViewer viewer;
         * u041Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du043Eu0439 u043Fu0430u043Fu043Au0435
        private string TempFilePath;
         * u041Fu0430u0440u0430u043Cu0435u0442u0440 u0437u0430u043Fu0438u0441u0438 u0432 u0440u0435u0436u0438u043Cu0435, u0442u0430u0431u043Bu0438u0446u0435 (u0438u0442u0434...)
         * u041Du0443u0436u0435u043D u0434u043Bu044F u0442u043Eu0433u043E u0447u0442u043Eu0431u044B u0432u044Bu0431u0438u0440u0430u0442u044C
         * u043Eu043Fu0435u0440u0435u0434u043Bu0451u043Du043Du044Bu0439 u0434u0430u0442u0430u0441u0435u0442, u0441u043Eu043Eu0442u0432u0435u0442u0441u0442u0432u0443u044Eu0449u0438u0439 u0432u044Bu0431u0440u0430u043Du043Du043Eu0439 u0437u0430u043Fu0438u0441u0438
        private int ObjectIDOfTemplate;
         * u0423u0441u0442u0430u043Du043Eu0432u043Au0430 u0437u043Du0430u0447u0435u043Du0438u044F ObjectIDOfTemplate
        public void SetObjectIDOfTemplate(int /*
                                               * ObjectID u0442u043Eu0433u043E u0448u0430u0431u043Bu043Eu043Du0430,
                                               * u043Au043Eu0442u043Eu0440u044Bu0439 u043Du0430u0434u043E u043Fu043Eu043Bu0443u0447u0438u0442u044C
                                                  EnternalObjectID)
            ObjectIDOfTemplate = EnternalObjectID;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C ObjectID u0448u0430u0431u043Bu043Eu043Du0430
         * u0441 u043Au043Eu0442u043Eu0440u044Bu043C u0440u0430u0431u043Eu0442u0430u043Bu0438 u0434u043Bu044F
         * u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E u0432u043Du0435 u0431u0438u0431u043Bu0438u043Eu0442u0435u043Au0438
        public int GetObjectIDOfTemplate()
            return ObjectIDOfTemplate;
         * u041Fu0443u0442u044C u043A u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        private string TemplateFilePath;
         * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u043Fu0443u0442u044C u043A
         * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        public void SetTemplateFilePath(string In)
            TemplateFilePath = In;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0443u0442u044C u043A
         * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        public string GetTemplateFilePath()
            return TemplateFilePath;
         * u0424u0443u043Du043Au0446u0438u044F u043Eu0442u043Au0440u044Bu0442u0438u044F u0444u0430u0439u043Bu0430,
         * u043Fu043Eu043Bu0443u0447u0435u043Du043Du043Eu0433u043E u0438u0437 u0431u0430u0437u044B u0438
         * u043Fu043Eu043Bu043Eu0436u0435u043Du043Du043Eu0433u043E u0432u043E u0432u0440u0435u043Cu0435u043Du043Du0443u044E u043Fu0430u043Fu043Au0443
        public int ParseReport(string FilePath)
            viewer = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
            CrystalDecisions.CrystalReports.Engine.ReportDocument rd =
                new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            try
                rd.Load(FilePath);
                try
                    for (int i = 0; i < rd.DataSourceConnections.Count; i++)
                        rd.DataSourceConnections<i>.SetConnection(
                            GetConnectionString().GetServerName(),
                            GetConnectionString().GetDatabaseName(),
                            GetConnectionString().GetUserName(),
                            GetConnectionString().GetPassword()
                        for (int j = 0; j < rd.Database.Tables.Count; j++)
                            DataTable dataSet = new DataTable();
                            SqlConnection C = new SqlConnection(GetConnectionString().ToString());
                            string ViewName = GetDataViewName(GetConnectionString(), ParseTableName(
                                            rd.Database.Tables[j].Name));
                            SqlCommand Q = new SqlCommand("select * from " + ViewName
                                , C);
                            Q.CommandType = CommandType.Text;
                            SqlDataAdapter adapter = new SqlDataAdapter();
                            adapter.SelectCommand = Q;
                            adapter.Fill(dataSet);
                            rd.Database.Tables[j].SetDataSource(dataSet);
                catch (Exception e)
                    MessageBox.Show(e.Message);
                try
                    SetTemplateFilePath(TempFilePath + "\\" + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                    rd.ReportOptions.EnableSaveDataWithReport = true;
                    viewer.ReportSource = rd;
                    viewer.RefreshReport();
                    rd.SaveAs(TemplateFilePath);
                    rd.Close();
                    return 0;
                catch (Exception e)
                    MessageBox.Show(e.Message);
                    return -1;
            catch (Exception ex)
                rd.ReportOptions.EnableUseDummyData = true;
                rd.ReportOptions.EnableSaveDataWithReport = true;
                viewer.RefreshReport();
                rd.SaveAs(TemplateFilePath);
                MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
                return -1;
         * u0420u0430u0437u0431u0438u0435u043Du0438u0435 u0438u043Cu0435u043Du0438 u0442u0430u0431u043Bu0438u0446u044B
         * u0434u043Bu044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u043Du043Eu043Cu0435u0440u0430 u043Au043Bu0430u0441u0441u0430
        public string ParseTableName(string TableName)
//            MessageBox.Show(TableName);
            int x = 0;
            if (TableName.Contains("Class"))
                x = TableName.LastIndexOf("s");
                return TableName.Remove(0,x+1);
            if(TableName.Contains("Attr"))
                x = TableName.IndexOf("r");
//           MessageBox.Show(x.ToString());
//           MessageBox.Show(TableName.Remove(0, x+1));
            return TableName.Remove(0, x+1);
         * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0444u0430u0439u043Bu0430 u0438u0437 u0431u0430u0437u044B
        public int ParseReportWithDataBase()
            try
                string ConnectionString = GetConnectionString().ToString();
                SqlConnection C = new SqlConnection(ConnectionString);
                C.Open();
                string SelectString = "select P119 from "+ GetDataViewName(GetConnectionString(),"24") +" where P115='";
                SelectString = SelectString+FileTreeView.SelectedNode.Text.ToString()+"'";
                SqlCommand Q = new SqlCommand(SelectString, C);
                Q.CommandType = CommandType.Text;
                SqlDataAdapter adapter = new SqlDataAdapter();
                adapter.SelectCommand = Q;
                DataTable table = new DataTable();
                adapter.Fill(table);
                byte[] b = (byte[])table.Rows[0].ItemArray.GetValue(0);
                FileStream fs = File.Create(TempFilePath+"\\"+FileTreeView.SelectedNode.Text.ToString()+".rpt");
                fs.Write(b, 0, b.Length);
                fs.Close();
                C.Close();
                return 0;
            catch (Exception ex)
                MessageBox.Show(ex.Message);
                return -1;
         * u0421u0442u0440u0443u043Au0442u0443u0440u0430, u043Eu043Fu0438u0441u044Bu0432u0430u044Eu0449u0430u044F u043Fu0430u0440u0430u043Cu0435u0442u0440u044B
         * u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043A u0431u0430u0437u0435 u0434u0430u043Du043Du044Bu0445,
         * u043Au0430u043A u0434u043Bu044F u0432u043Du0435u0448u043Du0435u0433u043E u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F
         * u0442u0430u043A u0438 u0434u043Bu044F u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E
        public struct ConnectionString
             * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            private string DataSource_Value;
             * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            private string InitialCatalog_Value;
             * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            private string UserID_Value;
             * u041Fu0430u0440u043Eu043Bu044C
            private string Password_Value;
             * u041Fu0435u0440u0435u0433u0440u0443u0436u0435u043Du043Du044Bu0439 u043Au043Eu043Du0441u0442u0440u0443u043Au0442u043Eu0440
             * u0434u043Bu044F u0440u0443u0447u043Du043Eu0439 u0438u043Du0438u0446u0438u0430u043Bu0438u0437u0430u0446u0438u0438
             * u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F,
             * u043Du0443u0436u0435u043D u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E
             * u0432 u043Eu0434u0440u0443u0433u0438u0445 u0444u043Eu0440u043Cu0430u0445
            public ConnectionString(string /*
                                            * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                              InDataSource_Value,
                                    string /*
                                            * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                              InInitialCatalog_Value,
                                    string /*
                                            * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                                            */ InUserID_Value,
                                    string /*
                                            * u041Fu0430u0440u043Eu043Bu044C
                                            */ InPassword_Value)
                DataSource_Value = InDataSource_Value;
                InitialCatalog_Value = InInitialCatalog_Value;
                UserID_Value = InUserID_Value;
                Password_Value = InPassword_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F u0441u0435u0440u0432u0435u0440u0430
             * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            public string GetServerName()
                return DataSource_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Du0430u0437u0432u0430u043Du0438u0435
             * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            public string GetDatabaseName()
                return InitialCatalog_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F
             * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            public string GetUserName()
                return UserID_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0430u0440u043Eu043Bu044C
             * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            public string GetPassword()
                return Password_Value;
             * u041Fu0435u0440u0435u0432u043Eu0434 u0441u0442u0440u0443u043Au0442u0443u0440u044B u0432 u0442u0435u043Au0441u0442u043Eu0432u044Bu0439 u0432u0438u0434
             * u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u043Fu0440u0438 u0441u043Eu0437u0434u0430u043Du0438u0438 u043Au043Eu043Du043Du0435u043Au0442u043Eu0440u0430
            public override string ToString()
                return "Data Source="+DataSource_Value+";Initial Catalog="+
                    InitialCatalog_Value+";User ID="+UserID_Value+";Password="+
                    Password_Value;
         * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043Fu043E u0443u043Cu043Eu043Bu0447u0430u043Du0438u044E
         * u043Du0443u0436u043Du0430 u0431u044Bu043Bu0430 u0434u043Bu044F u0442u0435u0441u0442u043Eu0432
        static private string GetDefaultConnectionString()
            return "Data Source=BSRV01;Initial Catalog=Prokat_Last;User ID=sa;Password=";
         * u0412u043Du0443u0442u0440u0435u043Du043Du044Fu044F u0441u0442u0440u043Eu043Au0430 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
         * u043Du0435 u0434u043Eu0441u0442u0443u043Fu043Du0430 u0434u043Bu044F u0432u044Bu0437u043Eu0432u0430 u043Du0430u043Fu0440u044Fu043Cu0443u044E
        private ConnectionString localConnectionString;
         * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
        public void SetConnectionString(ConnectionString CS)
            this.localConnectionString = CS;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
        public ConnectionString GetConnectionString()
            return this.localConnectionString;
         * u0424u0443u043Du043Au0446u0438u044F u0443u0434u0430u043Bu0435u043Du0438u044F u0432u0440u0435u043Cu0435u043Du043Du043Eu0433u043E u0444u0430u0439u043Bu0430
         * u043Fu043Eu0441u043Bu0435 u0437u0430u0432u0435u0440u0448u0435u043Du0438u044F u0432u0441u0435u0445 u043Eu043Fu0435u0440u0430u0446u0438u0439 u0441 u0448u0430u0431u043Bu043Eu043Du043Eu043C
        private void MainForm_FormClosed(object sender, FormClosedEventArgs e)
            if (FileTreeView.Nodes.Count!=0)
                if (File.Exists(TemplateFilePath))
                    File.Delete(TemplateFilePath);
         * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u0434u0432u043Eu0439u043Du043Eu0433u043E u043Au043Bu0438u043Au0430
         * u043Fu043E u0448u0430u0431u043Bu043Eu043Du0443 u0432 u0434u0435u0440u0435u0432u0435 u0444u0430u0439u043Bu043Eu0432
        public void FileTreeView_DoubleClick(object sender, EventArgs e)
            int Result = 0;
            try
                Result = ParseReportWithDataBase();
                if (Result == 0)
                    Result = ParseReport(TempFilePath + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                    if (Result == 0)
                        Process.Start(TemplateFilePath);
                else
                    MessageBox.Show("u0424u0430u0439u043B u043Du0435 u043Cu043Eu0436u0435u0442 u0431u044Bu0442u044C u043Eu0442u043Au0440u044Bu0442!");
            catch (Exception ex)
                MessageBox.Show(ex.Message);
         * u041Fu043Eu043Bu0443u0447u0435u043Du0438u0435 u0432u0441u0435u0445 u0444u0430u0439u043Bu043Eu0432 u0441 u0440u0430u0441u0448u0438u0440u0435u043Du0438u0435u043C .rpt
         * u0438u0437 u0431u0430u0437u044B u043A u043Au043Eu0442u043Eu0440u043Eu0439 u043Fu0440u0438u0441u043Eu0435u0434u0438u043Du0438u043Bu0438u0441u044C
        public void GetReportNamesFromDataBase(ConnectionString CS)
            try
                SqlConnection C = new SqlConnection(CS.ToString());
                SqlDataAdapter adapter = new SqlDataAdapter();
                DataTable table = new DataTable();
                table.Clear();
                string sqlcom = "Select P115 from " + GetDataViewName(CS,"24") + " where P116 like '%.rpt'";
                SqlCommand Q1 = new SqlCommand(sqlcom,C);
                Q1.CommandType = CommandType.Text;
                adapter.SelectCommand = Q1;
                adapter.Fill(table);
                FileTreeView.Nodes.Clear();
                for (int i = 0; i < table.Rows.Count; i++)
                        FileTreeView.Nodes.Add(table.Rows<i>.ItemArray.GetValue(
                            table.Rows<i>.ItemArray.Length-1).ToString());
//                        MessageBox.Show(table.Rows<i>.ItemArray.GetValue(0).ToString());
                C.Close();
            catch (Exception ex)
                MessageBox.Show(ex.Message);
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F DataView
         * u0434u043Bu044F u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
        private string GetDataViewName(ConnectionString CS,string ClassID)
            string ViewName = "";
            SqlConnection C = new SqlConnection(CS.ToString());
            C.Open();
            SqlCommand Q = new SqlCommand("[dbo].[_SysGetClassesInfoNew1]"/*P115 from dbo.Attr24 where P116='.rpt'*/, C);
            Q.CommandType = CommandType.Text;
            SqlDataAdapter adapter = new SqlDataAdapter();
            adapter.SelectCommand = Q;
            DataTable table = new DataTable();
            adapter.Fill(table);
            for (int i = 0; i < table.Rows.Count; i++)
                if (table.Rows<i>.ItemArray.GetValue(0).ToString() == ClassID)
                    ViewName = table.Rows<i>.ItemArray.GetValue(13).ToString();
                    // MessageBox.Show(ViewName);
            C.Close();
            return ViewName;
         * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u043Au043Bu0438u043Au0430 u043Du0430 u0432u044Bu043Fu0430u0434u0430u044Eu0449u0435u043C
         * u043Cu0435u043Du044E u0432 u043Fu0443u043Du043Au0442u0435 "Delete"
        private void deleteToolStripMenuItem_Click(object sender, EventArgs e)
            FileTreeView.SelectedNode.Remove();

Report Portlets do not refresh data.

How can I refresh a report portlet?
I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
Thanks, Deb

I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

UIX form will not refresh data within session

I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time its displayed? I'm using JDeveloper 10.1.2
Thanks, Craig Smith
Message was edited by:
user503876
Message was edited by:
user503876

Dear Sir...
in the struts page flow diagram
1- create a data action
2- drag the execute method from the viewobject methods and drop it on the data action
3- draw a page forward from the data action to your data page
4- finally ad a refresh link in your page which links to your data action
now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
best regards

How to extracting data in all objects except one object?

hi experts,
when we are trying extracting(load) data, it should be updated in all objects except one object,what is the procedure, pl anybody can explain step by step procedure.
thanks & regards
vijay

Hi vijay
By object do you mean infoObject ?..if it is then you can set no update in update rule and do not map in transfer rule...
Thanks
Tripple k

Tlanes not being created for all locations for one product

Hello Experts - I need some advice on the following situation:
We have a set of products where tlanes are only being created for 3 locations out of many. What would cause the tlanes to not be generated for all locations if all master data elements are present? We have a valid inforec, mrp views, etc. I can't see anything different with the 3 locations that are working correctly.
Any help would be much appreciated.
Thanks!

Thank you for your resopnse:
To answer your questions, yes, we have done all of these things and the tlanes are still not being created. We have been using SPP for 6 months and this is the first time we've seen this problem. Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
Thanks in advance for your advice.
AAF1999

PDF output does not refresh data in BI Publisher, XML and HTML do refresh

I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
Francisco

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

Transaction DB02 not refresh data

Hello,
we have installed ECC5.0 on OS400 with DB400. We have an issue with transaction DB02, it does not show new data, i mean no refresh. The last data had some months.
We have checked the transaction DB4COCKPIT and works ok, it showme actually data.
What can we check?
Thanks

Hai,
Have you checked for the Standard jobs in your system, please chk whether they are running or not.
Also check the notes:
   1. 1002840 - No data or obsolete data in DB Space Statistic monitor
   2. 1028624 - Overview of DBA Cockpit for Oracle
   3. 907443 - Oracle database monitor
Hope this helps.
Regards,
Yoganand.V

'ALL' variable value not bringing data for All Geo Units

Hi everyone!
In BEx 7.0 we can't use * as we did in 3.x to use all the variable values.
Running a query in BEx 7.0, when I am selecting a variable value for Geographic Unit I see the value 'ALL' under the single value list. I select this value but I get no data when I use it.
What checks can I do to know this is working properly?
Is this expected to work as it is was the * used in 3.x?
Any help provided will be greatly appreciated.
Thanks!

Hi
have you chekced the master data for the Geoobjects,
have you checked the options at cube/Multi provider level to read data from Master / Transactional
hope this help
Regards
Daya Sagar

XML publisher with graph not refresh date

Hi
I use EBS r12, and i create report using XML and BI Publisher rtf file, this report include graph, the problem is when i add the graph according to xml data and run the report throw bi publisher desktop its work fine, but when i run it in concurrent it will show table data OK but graph data will not change according to XML data,
Any suggestion?

Hi,
Please refer note:
BI Publisher Graphing On A Unix Platform Not Handling XML Data [ID 1189413.1]
Best Regards

Dbx collector not collecting data for all threads

Hi, I am having problem with the dbx collector when I collect data from a multithreaded application. Data seems to be collected only from the first threads. Sun Studio 11
(dbx) attach -p 5501 my_proc
(dbx) threads
> t@2 a l@2 SI_SigThr() running in ___sigtimedwait()
t@3 a l@3 SF_autoReInit() running in ___nanosleep()
t@4 b l@4 SF_sendHeartBeats() running in ___nanosleep()
t@5 a l@5 SF_Main() running in ___nanosleep()
t@6 a l@6 MSI_TimerThread() running in ___nanosleep()
t@7 b l@7 HbtMonitor() running in ___nanosleep()
t@20 b l@20 umem_update_thread() sleep on 0xfe803ea8 in __lwp_park()
t@22 a l@22 FXI_SorterSpooler() sleep on 0xbd418 in __lwp_park()
t@23 a l@23 XCI_ReaderThread() running in __pollsys()
t@24 a l@24 MSI_ListenerThread() running in soaccept()
t@25 a l@25 MSI_ListenerThread() running in soaccept()
... and so on.... (sever hundred threads)
t@33 a l@33 ReconnectingThread() sleep on 0xc55f8 in __lwp_park()
... and so on.... (sever hundred threads)
(dbx) collector limit unlimited
(dbx) collector enable
(dbx) cont
^C
(dbx) collector show
collector enable
collector profile timer 10.007
collector profile on
collector synctrace threshold calibrate
collector synctrace off
collector hwprofile counter insts
collector hwprofile off
collector heaptrace off
collector mpitrace off
collector store directory "."
collector store experiment "test.3.er"
collector sample periodic
collector dbxsample on
collector sample period 1
collector limit none
collector archive on
(dbx) collector disable
When viewing the experiment only the t@2,t@3,t@4 and t@33 are seen!?
What

I had a few other questions in my earlier post.
During the time that data collection was running, how active (w.r.t. CPU time) should those threads be? When you run collect (instead of DBX) and look at timeline, how much activity do you see activity on the 'missing' threads during the similar segment (and loading) of the program's operation ? (I believe the collector won't record data if a thread does not get sufficient CPU time during the data collection period. )
Also, please post which OS version you are using and which version of collect & dbx. Thanks!

BEx not refreshing data on all embedded queries:One variable, one variant:

Similar Messages

Maybe you are looking for