Bex not to display Headings

Hi ,
I dont want to see headings in my Bex mean to say
Sold-to-party   Total Orders  Hold   Open Orders
1234               100                 50       50
1235               70                   50       20
1236               50                   30       50
Here i want to display in Bex  only like Below
1234               100                 50       50
1235               70                   50       20
1236               50                   30       50
i am in BW3.5 version please someone suggest me how to do it , is that possible ,
Highly Appreciate your Help
Thanks,
GAL

Hi GAL
Through query its difficult to achieve but you have two options here one is controlling it through workbook
second one is through excel macros in work book.
I would suggest to go with the first one controlling through the work book
Execute your query and save it as work book delete the header row and resave it.
Hope its clear a little..!
Thanks
K M R
>
GAL BI wrote:
> Hi ,
>
> I dont want to see headings in my Bex mean to say
>
> Sold-to-party   Total Orders  Hold   Open Orders
>
> 1234               100                 50       50
> 1235               70                   50       20
> 1236               50                   30       50
>
> Here i want to display in Bex  only like Below
>
>
> 1234               100                 50       50
> 1235               70                   50       20
> 1236               50                   30       50
>
>
> i am in BW3.5 version please someone suggest me how to do it , is that possible ,
> Highly Appreciate your Help
>
>
> Thanks,
>
> GAL

Similar Messages

  • SAP Bex: Not Enough cells to display result

    Hi,
    In BW 3,5 Analyzer, if user typed some values next to the reported columns and then tried to drill down on columns say characteristics profit center, the system used to display a message with options like below:
    ''SAP Bex: Not enough cells to display result
    -TO extend the result areas to the right:
    0 Overwirte the existing cells
    0 insert cells next to the results area
    0 insert entire columns''
    After upgrading the query to 7.0, the Analyzer does not pop-up this information and it simply overwrites the existing cells.
    Can you please advise, if there are some settings in BI 7.0 which can enable pop-up of this information window with above options?
    Please suggest.
    Best Regards,
    UR

    Hi,
    Try setting the cells which are not to be overwritten as formulas and refreshing them which may not overwrite those cells.
    Thanks,
    Arun

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • Adhoc Query data not getting displayed on Portal

    Hi,
    I have a problem with custom Adhoc query data not getting displayed on the portal.
    It was getting displayed initially but after a user made some changes to the query its not getting displayed.
    The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
    Can anyone help me on this.
    Also if anyone can tell me how do i debug an Adhoc query from potal.
    Is there any tool to debug an Abap program from portal.
    I dont want to use trace,
    Thanks
    GT
    Message was edited by: GT

    Hi GT
    find out the EXACT query u want to launch if it's display
    in BW buisness explorer then change the iview property
    for that query in portal . right click on iview
    BEx Web Application Query String -> assign correct query
    regards,
    kaushal

  • Cannot extract the embedded font arial.Some char might not be displayed

    Hi Folks,
                  Our requirement is to generate the customer account statement for a set of cusomters during a particular period.
                         we  use a script to generate the statement and convert it to pdf.This pdf is then stored in the application server and retrived using cg3y transaction.The transaction allows the statement to be generated for multiple customers and company code.
    the problem that we face is that the first customer account statement is generated properly the rest of the statements are not displayed properly.When we open the customer account statement we get the error 'Cannot extract the embedded font arial.Some characters might not be displayed properly'.All the Headings that we of the font BOLD ARIAL were not displayed.
    This error does not occur for the first pdf file generated.(say we have 3 customers  for the 1st customer pdf is proper however for the next two error'.
                         When I checked the application server I found that the first file has font subtype as Type1 and then rest of the files have font subtype as Truetype.
    This is working fine.I downloaded the file to pc using cg3y.the pdf looks fine.                   
    Directory:  /home/nwfound/n_us_cas
    Name:       0010798791US13122009.PDF
    %PDF-1.3#
    2 0 obj#
    /WinAnsiEncoding#
    endobj#
    3 0 obj#
    <<#
    %Devtype SAPWIN   Font COURIER  normal Lang EN#
    /Type /Font#
    /Subtype /Type1#                       ****see here font subtype is type1
    /BaseFont /Courier#
    /Name /F001#
    /Encoding 2 0 R#
    >>#
    endobj#
    4 0 obj#
    <<#
    /Filter 5 0 R#
    /Length 6 0 R#
    /Length1 352224#
    >>#
    stream#
    This one is not working fine.Gives an error 'Cannot extract the embedded font arial.Some characters might not be displayed properly when downloaded to pc using cg3y.The heading that were of font ARIAL BOLD were not displayed.
    Directory:  /home/nwfound/n_us_cas
    Name:       0010000105US13062010.PDF
    %PDF-1.3#
    2 0 obj#
    /WinAnsiEncoding#
    endobj#
    3 0 obj#
    <<#
    %Devtype SAPWIN   Font COURIER  normal Lang EN#
    /Type /Font#
    /Subtype /TrueType#                - see here the subtype is True type.How can i change this?
    /BaseFont /Courier#
    /Name /F001#
    /Encoding 2 0 R#
    >>#
    endobj#
    4 0 obj#
    <<#
    /Filter 5 0 R#
    /Length 6 0 R#
    /Length1 352224#
    >>#
    I have to change the tont subtype to Type1 as in my first cust. statement.Is there a way to this???????
    There can be no problem with the code cause the account statement generated for first customer is perfect.
    Any suggestions will be appreciated.
    IF hotfdata[] IS NOT INITIAL.
    *Convert otf data to pdf lines.
        CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format                = 'PDF'
          IMPORTING
            bin_filesize          = l_size
          TABLES
            otf                   = hotfdata
            lines                 = li_pdf_output
          EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            err_bad_otf           = 4
            OTHERS                = 5.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    *clear hotfdata otherwise next empty cust acc. statement may have
    *this data.
        REFRESH:hotfdata.
        CLEAR   hotfdata.
    *If account statement is generated then set w_flag to generate email.
        w_flag = 'X'.
    *The converted pdf lines are of char132 format.
    *They have to be converted to char255 format.
        LOOP AT li_pdf_output INTO lwa_pdf_output.
          TRANSLATE lwa_pdf_output USING ' ~'.
          CONCATENATE l_gd_buffer lwa_pdf_output INTO l_gd_buffer.
          CLEAR lwa_pdf_output.
        ENDLOOP.
        TRANSLATE l_gd_buffer USING '~ '.
        REFRESH li_mess_att.
        DO.
          li_mess_att = l_gd_buffer.
          APPEND li_mess_att.
          SHIFT l_gd_buffer LEFT BY 255 PLACES.
          IF l_gd_buffer IS INITIAL.
            EXIT.
          ENDIF.
        ENDDO.
        CLEAR   x_objcont.
        REFRESH x_objcont.
        LOOP AT li_mess_att.
          x_objcont = li_mess_att.
          APPEND x_objcont.
        ENDLOOP.
    *application file name
        CONCATENATE po_filun kna1-kunnr save_bukrs datum02+4(2)
                      datum02(4) lc_pdf INTO l_filename.
        CONDENSE l_filename NO-GAPS.
        CONCATENATE file l_filename INTO file.
        CONDENSE file NO-GAPS.
    *Transer pdf data to app. server.
        "data len type i.
        OPEN DATASET file FOR OUTPUT IN BINARY MODE.
        LOOP AT x_objcont.
          TRANSFER x_objcont TO file.
        ENDLOOP.
        CLOSE DATASET file.
      ELSE.
        REFRESH:hotfdata.
        CLEAR   hotfdata.
      ENDIF.

    Hi,
    this can be related to the compression of the PDF file.
    You can turn off the FlateDecode compression again via report RSTXPDF3 as described in Note #843480. It is a little confusing. The option 'FLATE_COMPR_OFF' needs to be set to 'On' to turn off the FlateDecode compression.
    To set this please run as follows:
    se38 -> RSTXPDF3 -> enter 'FLATE_COMPR_OFF' in the 'Name' field -> Select 'Change Settings' radio button
    You will get a pop-up 'Do not use flat compression'.
    Select the 'on' button.
    After this check if the PDF is created correctly.
    regards,
    Aidan

  • Total is not getting displayed in the ALV output.

    Hi,
    Total is not getting displayed in the ALV output.
    I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
    Are  there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
    source code:
    DATA: layout TYPE slis_layout_alv,
          IT_eventS  TYPE slis_t_event,
          fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    TYPES: BEGIN OF ty_tab,
          belnr TYPE dberchz-belnr,
          belzart TYPE dberchz-belzart,
          net TYPE dberchz-nettobtr,
          END OF ty_tab.
    DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
    SELECT belnr belzart nettobtr
      FROM dberchz
      INTO TABLE lt_tab[]
    WHERE belnr eq '000000000001'.
      if sy-subrc ne 0.
      ENDIF.
    *  defining layout
    layout-colwidth_optimize = 'X'.
    layout-def_status = 'X'.
    *defning event
    *event
    *defining field catalog
    fcat-col_pos = 1.
    fcat-fieldname = 'BELNR'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 2.
    fcat-fieldname = 'BELZART'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 3.
    fcat-fieldname = 'NET'.
    fcat-tabname  = 'LT_TAB'.
    fcat-do_sum = 'X'.
    APPEND fcat.
    *calling alv
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        i_callback_program             = 'YZ_PLR'
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   IT_EXCLUDING                   =
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        is_layout                        = layout
        it_fieldcat                      = fcat[]
        i_tabname                        = 'LT_TAB'
        it_events                        = IT_EVENTS[]
    *   IT_SORT                          =
    *   I_TEXT                           = ' '
      tables
        t_outtab                         = lt_tab[]
    * EXCEPTIONS
    *   PROGRAM_ERROR                    = 1
    *   MAXIMUM_OF_APPENDS_REACHED       = 2
    *   OTHERS                           = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    Thanks,
    Gaurav

    Hi
    No I don't think, this is my code (based on your code) and it works fine:
    TYPE-POOLS SLIS.
    DATA: BEGIN OF LT_TAB OCCURS 0,
           BELNR LIKE BSEG-BELNR,
           GJAHR LIKE BSEG-GJAHR,
           WRBTR LIKE BSEG-WRBTR,
           WAERS LIKE BKPF-WAERS,
          END OF LT_TAB.
    DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS  TYPE SLIS_T_EVENT,
          FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
    START-OF-SELECTION.
      FCAT-COL_POS       = 1.
      FCAT-FIELDNAME     = 'BELNR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'BELNR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 2.
      FCAT-FIELDNAME     = 'GJAHR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'GJAHR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 3.
      FCAT-FIELDNAME     = 'WRBTR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-CFIELDNAME    = 'WAERS'.
      FCAT-REF_FIELDNAME = 'WRBTR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      FCAT-DO_SUM        = 'X'.
      APPEND FCAT.
      FCAT-COL_POS       = 4.
      FCAT-FIELDNAME     = 'WAERS'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'WAERS'.
      FCAT-REF_TABNAME   = 'BKPF'.
      FCAT-DO_SUM        = SPACE.
      APPEND FCAT.
      SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
        WHERE BUKRS = 'MAAB'
          AND BELNR = '0000000001'.
      LT_TAB-WAERS = 'EUR'.
      MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
    *CALLING ALV
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FCAT[]
          I_TABNAME   = 'LT_TAB'
          IT_EVENTS   = IT_EVENTS[]
        TABLES
          T_OUTTAB    = LT_TAB[].
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    I've also inserted a currency field
    Max

  • '@' not getting displayed in the ALV report

    Hello,
    I am facing  a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
    can anyone please help me in resolving the issue.
    Thanks in advance.
    Thanks and Regards,
    Santhosh Guptha N.

    @ is a default value as per ALV internal process. This is used in icons .
    I think this is causing the confusion.
    Check in the fieldcat if there is any adjsutment to be made to handle this.
    Br,
    Vijay

  • Dynamic mandatory field error message is not getting displayed in webui

    Hi,
    In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
    Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
    I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
    Can anybody tell where the problem is?
    Thanks,
    Hari.

    Hi Hari,
    Really sorry do not know how to convert this nug file to text
    How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
    Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
    Thanks,
    Rajesh P

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • Material type not getting displayed in the cube........

    Hi,
    In my infocube material type for one of the material is not getting displayed.
    When I check in the content of the cube for this material all the fileds are getting displayed except material type.
    However it is present in the material master data from which it is put into the update rules to populate in the cube.
    Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
    Can some body let me know what could be the reason.
    Thanks,
    Jeetu

    Hi Jeetu,
    can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
    You should adapt your scenario:
    - first do not use the standard attribute derivation during your URules: performance is very bad.
    - implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
    - implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
    Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
    hope this helps...
    Olivier.

  • Barcode C128 is not getting displayed in Sapscript

    HI,
    I need to print the barcode in the Sapscript.
    The barcode is not getting displayed even in the preview also, when I give the Barcode C128.
    But when I give other Barcodes, it is getting displayed in the preview.
    Can anyone let me know the solution to print the barcode for C128, as others are not that much fit to print.
    Thanks
    Rakesh

    Hi Dieter,
    No. I haven't.
    Is this the reason for that?
    let me know the procedure.
    thanks
    Rakesh

  • PIR & CIR is not getting displayed in APO product master

    Hi guys,
        I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
    Thanks
    S.Murali

    I am Basis consultant.
    Regarding RFC, logical system assinement, are the things are configured.
    But still it is not active the integration between R/3 & APO server.
    (Behalf of Murali )

  • Work item not getting displayed in the portal

    Hi  experts,
    We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
    In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
    If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of  one of the tasks 17900101 which we are using for approving the form]
    We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
    Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

    <ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ApproveFormApp"/>
                <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
    Task TS17900101 and visualization type is JavaWebDynpro
    APPLICATION     ApproveFormApp
    PACKAGE     sap.com/pa~asr~formstep

Maybe you are looking for