BEx output issue

Hi All,
I have 2 fields in the rows of my BEx query designer, when you run the report both of those fields data show in single column of BEx output.
Ideally those two fields show in different columns instead of single.
Please review the attached and let me know if any resolution to fix this?
thanks in advance,
vinay

Hi Suman,
I was wondering where do we see the "Display as hierarchy" setting for the KF structure, i remember we can see the hierarchy settings for characteristics not sure how for KF structure.
May be am missing something here, though currently i dont have system in front of me .
If its ok, could you please take a minute and show me exactly where i can see that option. A screen shot would be of great help.
thank you..

Similar Messages

BEx output issue - simple one

Hi Gurus,
I copied a query 'A_query1' to another query 'B_query2',.
A-query1 shows the output as :
ProfitCenter     CompanyCode
123                     201
123                     201
Not assigned     201
Not assigned     201
Not assigned     201
Not assigned     201
Not assigned     201
Not assigned     201
and When I execute B_query2, the output is looking like,
ProfitCenter     CompanyCode
123                     201
Not assigned     201
User wants to display 123 to the next row also, and Not assigned should come in all the fields like in A_query1.
Please let me know how to procede further. This may be small thing, but I dont know how to make this setting.
Thanks in advance
Ananya
ABA
ABA
Not assigned
Not assigned
Not assigned
Not assigned
Not assigned
But when I execute B-query2, I am getting the following output:
Companycode
ABA
Not assigned

Hi Ananya,
If you are sure that the values are in the cube.. Can you please check if the setting 'Suppress repeated key values' is checked? You can see this in the properties. If so, kindly uncheck this setting and refresh the query.
Hope this helps,
Juice

PO output issue

Hello all Gurus,
I have a problem with the PO output form. We have created new output types and tested them in quality environment and found that the PO is generating the correct output. Then we moved these output types to production environment and tested with our production user ids. There also, the system generated the correct PO output forms.
But when my client tested the outputs he is not getting data in Bill to address and Registration boxes. These two boxes contains the company code address. The system is displaying only the hardcoded data for the client. Not the company code data which is picked up from the tables through the form program. Can somebody suggest me why my client is getting this issue when we are not getting with our user ids in production?
Also, I don't think this is a problem of authorization roles, since this issue is coming only for the company code 3278.
For the rest of the company codes, the user is getting the correct PO forms. Only for Company code 3278, he is getting the incorrect output issue.
We tried to modify the program by updating the font size and character format. But this didn't work.
This issue has been there in my queue since the last one month and it has exceeded the permitted time limit. We are really bothered about this issue but not getting any correct solution for this.
Please, somebody provide me some valuable suggestions on this issue.
Thanks and Regards,
Umakanth.

Murugan,
1. For the client's user id, the PO output is not showing the company code data in the PO output form. But when we are trying to see the same thing in production in ME23N (we don't have access to make changes in production), we are getting the correct PO form that shows the company code address also.
2. The company code 3278 and output types were created at the same time and moved to production.

Master Data in BEX Output with no Transaction Data?

Is there a way I can show in my BEX output master data even if no transaction data ever existed for it?
We have accounts in ECCS that have never had any transaction data, but our accountants want that to show up in our BEX output.
We have tried setting the properties of the query to show all zero values, but since this never got a SID for the cube, it will not even show up then.
Any suggestions?

Hi Brent,
Please take a look at the following:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/d1603d13b5c72ee10000000a114084/content.htm
It talks about a multiprovider including the cube and InfoObject "to display characteristic values for which no transaction data or only low values exist.."
Hope this helps...

HT6030 Sound output issue with Mavericks

There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.

maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives.

Bex Report issue - transaction data of type Char not dispalyed complete

Hi BI Expers ,
I have one issue related to Bex reports here
I have complete data loaded in DSO , there is one field Job Title which is having a length of 60 char . When I am executing the report in Bex Analyzer , the value for Job Title is getting truncated after 30 characters . Although full 60 chararacters are loaded in DSO still I am not able to present them in reports .
Can some one help here , whether this is Analyzer limitation or is there some setting to fix this issue .
Regards
Anurag

Hi Anurag,
Check the Output length of the object that is giving out put as 30 charecters.
And check in Business Explorer tab option for BEx Description short, medium or High.
Hope this helps.
Veerendra.

WRITEQUERY program output issue..

hi,
we are using writequery program for one of our apps. when using writequery prg. the description is not displalyed completly in the output, but displays properly in BEx query output. Any thoughts on this issue..we have to use writequery for our app..
thanks

Hi,
Create a Background job schedule it will runs in background automatically it will creates a spool.
To Create Background job schedule T-Code SM36
To Execute the Background job schedule T-code SM37
To see the spool T-code is SP01.
Thanks
Ganesh

Any hints of how to exclude these lines from the following BEx output?

Hi,
I have a BEx report which outputs the following shipment activities, showing Doc and Items numbers, Requested and Received dates, actual and PO quantities.
DocNoItmNoReqDate-RcvdDate-PO_Qty-Act_Qty---TB%
1101-----5--12/10/05-12/5/05020--
80
1101-----5--12/10/05#00--80
1101-----5--12/10/05#200--
80
1101-----7--12/10/05-12/5/05030--
50
1101-----7--12/10/05-12/8/0505--
50
1101-----7--12/10/05#00--50
1101-----7--12/10/05#350--
50
Somehow, I am getting some activity lines which I do not understand but do not want in the output. Those are the lines which show u201CPO_Qty = 0 AND Act_Qty = 0 at the same time.u201D i.e. the highlighted lines.
Any hint on how to eliminate the highlighted lines from the output?
I played with calculated key figures but could not reason it out.
Thanks

DocNoItmNoReqDate-RcvdDate-PO_Qty-Act_Qty--- Formula                        TB%
PO QTY + ACT QTY
1101-----5--12/10/05-12/5/05020-----               20                        -
80
1101-----5--12/10/05#00--                 0                         -80
1101-----5--12/10/05#200-----                  20                     -
80
1101-----7--12/10/05-12/5/05030-----                30                      -
50
1101-----7--12/10/05-12/8/0505--
                5                         -
50
1101-----7--12/10/05#00-----                  0                         -50
1101-----7--12/10/05#350-----                 35                        -
50
Create Conditions over the Formula. Since the sum would be always 0 only when both the KF's are zero I think you can create condition over this formula.
Would this help?
Regards
VJ

Bex Hierarchy issue on Webi report

Hello Experts,
We are facing issues on use of Bex hierarchy in webi report,
Issue statement: We have webi report on bex query which have table and chart with input control on year and month to filter the report, table and chart uses hierarchy object to disply data. When we refresh report table and chart shows data with hierarchy on first level but once we check or uncheck any value from input control hierarchy in table and chart gets expanded and shows as flat structure. to get correct behaviour we have to collaps hierarchy.
Above behaviour happens for all report level filter like, block filter, drill filter, input control.
Please help me to know this is a bug or something wrong happened with development.
Regards,
Priyank Bhayani

Hello Everyone,
I have got SAP note which states this is expected behaviour hence closing the discussion.
1702356 - Hierarchy Nodes expanded automatically to all levels after selecting value in the input control in a webi report.
Regards,
Priyank Bhayani

Output Issue in Delivery

Hello Experts,
I have assigned the Output type RD00 to Replishnment Delivery,Since i require the output for STO for cross company i have assigned the output type RD00 in the procedure but i am facing the below error.
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
What could be the issue
Thanks
Shri..

The issue could be possibly because of incorrect Output determination procedure. Pls check again the output determination customization.
Also put a breakpoint in the Entry form routine of the driver program and see if it actually calls the programs. If it calls the program debug more to see if there is any issue within the driver program which could be hindering the output.
Thanks
Arjun

At selection- screen output issue

Hi,
I have a issue regarding at selection-screen output event with radio buttons,
Fields are like,
Block B1
RB1
Block B2
RB2
   field 1 (Check box)
   field 2 (Check box)
User can select one radio button at a time. If the user clicks on radio button RB1 then fields under Block B2 will be disabled. If user click on RB2 field 1 and fields 2 will be input enabled. Could you please give the solution asap
Note: Radio buttons are in different selection screen blocks.

Check this code -
*SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
*PARAMETERS:
*Pi1 TYPE C RADIOBUTTON GROUP G1 DEFAULT 'X',
*Pi2 TYPE CHAR25,
*Pi3 TYPE C RADIOBUTTON GROUP G1,
*Pi4 TYPE CHAR25.
*SELECTION-SCREEN END OF BLOCK B.
*PARAMETERS check AS CHECKBOX.
*PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
*PARAMETERS: ip1(10) TYPE c,
           ip2(10) TYPE c,
           ip3(10) TYPE c.
*SELECTION-SCREEN END OF BLOCK b1.
*SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
*PARAMETERS: ip4(10) TYPE c MODIF ID bl2,
           ip5(10) TYPE c MODIF ID bl2,
           ip6(10) TYPE c MODIF ID bl2.
*SELECTION-SCREEN END OF BLOCK b2.
*AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
   IF show_all <> 'X' AND
      screen-group1 = 'BL2'.
      screen-active = '0'.
   ENDIF.
   MODIFY SCREEN.
ENDLOOP.
Regards,
Amit Khare
reward all helpful replies.

Date format in Bex Output should be changed while using with Text Variable

I am using a Bex Query where have defined a Text Variable with replacement path. So whatever Date user enters in the selection screen variable (Input Variable) the same date appears in the report description.
For Ex: If user enters 30.04.2012 in Char Variable/Input Variable before executing the report, so once he executes the report the same date appears on report description like "ABC Analysis as on 20120430". Is also changes the report description whenever user changes the date in selection screen variable.
My requirement is......Date format should be come as 30.04.2012 (DD.MM.YYYY) instead of 20120430 (YYYYMMDD) in report description.
Guys could you please help me out to achieve the desired output.
Rgds,
Ritu

Please check if you have selected Replace with Key in that text variable.
Instead of that select External characteristic value key.
This should help you in giving the desired output.
Regards,
AL

Delimited Org Unit(having end date Current date) are not coming in Bex output.

HI All ,
I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
Please suggest .
Thanks,
Arvind Venai

Hi Arvind,
As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
There mught be some restriction in BEx Query , please check

OS X 10.8.5 mac mini hdmi audio output issue

I am running a 2012 Mac Mini with OS X 10.8.5 and my Mac is set for audio and video output via HDMI to my AV receiver / TV. I have recently noticed that HDMI audio output ceases to function once the computer goes to sleep. A full computer restart is required to resolve the issue which is an inconvenience to say the least.
Or is anyone aware of a simple fix?
All my software is up to date, the HDMI lead and connection works fine for video and audio works fine after a restart so it must surely be a software error. Worked fine until the latest OS X update...
Grateful for any help!

See > TS4113 Mac mini looses audio output...: Apple Support Communities and others like it, just to the right in More Like This

Line items to be clubbed and shown as single record in BEX output

Hi All
I needed help in BEX
The late days are calculated on basis of clearing date , due date which is not shown in output
Currently I have output as
Plant Customer   Amount Late Days
A         C1            100          20
A         C1            200          30
B         C2            100          15
B         C2            150          10
Need output as
Plant Customer   Amount Late Days
A          C1            300           50
B          C2            250           25
Regards
Ak

I have posting date which user enters on selection screen.
Now this posting date I need to compare with clearing date
and if clearing date is NULL or greater than posting date
it should display the records.
I have created 2 variables ZPOST_SO ( user entry) ZCLARDAT ( customer exit)
I have written exit but there is a bug in it.
Please advice what changes need to be done to the code or any other approach
Data: l_s_var_range3 Type RRS0_s_VAR_RANGE,
l_s_var_range2 type RRS0_s_VAR_RANGE,
postingdate Type /BI0/OIPSTNG_DATE,
clearingdate Type /BI0/OICLEAR_DATE.
CASE i_vnam.
WHEN 'postingdate'.
    IF I_STEP = 2.
READ TABLE I_t_var_range INTO l_s_var_range3 WITH KEY VNAM = ZPOST_SO.
READ TABLE I_t_var_range INTO l_s_var_range2 WITH KEY VNAM = ZCLARDAT.
      postingdate = l_s_var_range3-low.
      clearingdate = l_s_var_range2-low.
      If clearingdate >= postingdate or clearingdate is INITIAL.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        l_s_range-low = clearingdate.
      ENDIF.
      APPEND l_s_range TO e_t_range.
    ENDIF.
ENDCASE.
Regards
Amit

BEx output issue

Similar Messages

Maybe you are looking for