BEx output layout
Hello everyone!
I have a BEx query (BI 7) in which I'm displayin a key figure in regard to two characteristics:
Number
Number
Value
Value
January
February
January
February
10000
500
300
400
I want it to appear as follows:
Number
Value
January
February
January
February
10000
500
300
400
How can I do this? In Query Designer, in the preview area, the layout appears as I want, but not in the actual query output.
It's not a SAP GUI problem, as I have installed the latest version.
Best Regards,
Luís Andrade.
Thank you for your response!
But that will eliminate the headear altogether. I want the headers to appear once for each set of months (January, February,...)
Best Regards,
Luís Andrade.
Similar Messages
-
How to set Back ground job & get my desired output layout in sm36 & sm37 ?
Hai SAP ABAP/BASIS Gurus,
I am currently taking ME2N PO Pending value Report by setting variant in input screen & setting my own output layout ie only four field ie.Plant, Material,Currency,Still to be delivered value will be visible in output screen
I set Back ground in sm36 using my variant & i saw my output in sm37.. But I cant get output as my desired field..
This is my problem..
1) I Cant Get the Same output in shedule job [sm36 & sm37] like When i run in foreground for ME2n.
I am using ALV Scope of list..
2) If I use BEST Layout in Scope of list means i get the desired Output field layout as same as my foreground output field..
I want to get the output layout as desired & also in ALV format[ Useful for excel work]
Kindly guide me.
Thanks in advance..
swetha
Edited by: Swetha SAP Girl on Jul 2, 2009 5:06 PMHi Swetha,
To get the missed fields in the spool, while creating the background job(execute in background option) you can see the printer setting block at the end of the background job settings window, in that check the 'Spool Request Max. Width 255 char' check box and then continue. It will generate the spool list with maximum width and you can see all the fields in the spool output.
Thanks,
Muthu
Edited by: Muthu Prabakaran Selvam on Jul 3, 2009 2:35 PM -
Adding new field in output layout in transaction ME2N
I would like to know if it is possible to add new fields in the output layout of transaction ME2N. For example field EKPO-AFNAM (Requisitioner) that in the standard layout is not used.
Thanks a lot
MelihDear Melih,
We can do.add some functions.In this way SAP provided some dynamic search strategeis.you can use other wise create through variant cofiguration.
press SHIFT+F4 will apper dynamic selection tab there you can select some search strategeis.
Hope this can helps you
Prem. -
Changing the output layout of standard transaction FPWLM
Hi All,
We have a requirement where we need to change the output layout of the standard transaction FPWLM which is used fo the management of worklist for collecion management.
In this transaction under the current worklist if we select the worklist ID and display it , work items are displayed in the Grid display. We want to add certain fields here in the output layout of this transaction. We tried adding the fields by selecting the change layout option which displays the list of hidden fields which can be added . But the problem is the field which we want to add is not present in this list.
Is there any other way to add the fields to the output layout of standard transaction.
thanks
regards
manipalHi Manipal,
Maybe check IMG under Basic Settings for Collections Management.
This node contains the sub-node Worklist.
Two enhancements are availaable here:
BAdI: Enhancement of Worklist Items on Creation
BAdI: Enhancement of Worklist Items on Display
Maybe read the documentation for the nodes to determine if the enhancements will accomplish what you are looking for!?
Since this component is not active in our installation, I have no experience with this functionality.
Kind regards,
Robert -
Hi All,
I have 2 fields in the rows of my BEx query designer, when you run the report both of those fields data show in single column of BEx output.
Ideally those two fields show in different columns instead of single.
Please review the attached and let me know if any resolution to fix this?
thanks in advance,
vinayHi Suman,
I was wondering where do we see the "Display as hierarchy" setting for the KF structure, i remember we can see the hierarchy settings for characteristics not sure how for KF structure.
May be am missing something here, though currently i dont have system in front of me .
If its ok, could you please take a minute and show me exactly where i can see that option. A screen shot would be of great help.
thank you.. -
How to view the input and output layouts created in the planning folder?
Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
PoojaHi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps -
Master Data in BEX Output with no Transaction Data?
Is there a way I can show in my BEX output master data even if no transaction data ever existed for it?
We have accounts in ECCS that have never had any transaction data, but our accountants want that to show up in our BEX output.
We have tried setting the properties of the query to show all zero values, but since this never got a SID for the cube, it will not even show up then.
Any suggestions?Hi Brent,
Please take a look at the following:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/d1603d13b5c72ee10000000a114084/content.htm
It talks about a multiprovider including the cube and InfoObject "to display characteristic values for which no transaction data or only low values exist.."
Hope this helps... -
Hi guys
I need to edit the output layout for ME41 standard output, e-mail, fax and print version... and in the e-mail version, I need to attach an excel file with the Request for Quotation (RFQ)... anyone know where can I edit the output layout? and where can I attach the xls file?
Thank you!
Robertospro-mm-purchasing-messages-output control-message types-define message types for RFQ-maintain message types for RFQ-select output type NEU-select mail title and text-here give the title-select process routines-medium (print output)-programme(SAPFM06P)SAP routine(ENTRY_NEU)-form(MEDRUCK)--select partner roles medium(print output)-function(VN)--save
in case u r doing ur own z output type then just follow the above procedure and where ever u want to place ur own z format place it there.
regards,
indranil -
Download of report output layout to .TXT
Hello ,
Is there any FM to download the normal report output layout to .TXT with the layout design.
Thanks in advance.
Regards
JaiHi,
Normally report out put means data is available in internal table, so use these links
Download CSV file in presentation server through FM GUI_DOWNLOAD
Re: how to create a CSV file
type-pools:TRUXS.
data: begin of itab occurs 0,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
end of itab.
data: itab1 type TRUXS_T_TEXT_DATA.
select vbeln
posnr
up to 10 rows
from vbap
into table itab.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = ','
TABLES
I_TAB_SAP_DATA = itab
CHANGING
I_TAB_CONVERTED_DATA = itab1
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:TEMPtest.TXT'
TABLES
data_tab = itab1
EXCEPTIONS
OTHERS = 1. -
Planning Folders with multiple input and output layouts
Hi,
I have a planning folder with one input layout and 4 output layouts. The input layout has a GPS assigned to it which will be executed before layout change. Will this function get executed when I open any of the output layouts(out of 4) not necessarily the immediate output layout (next to the input layout) and will the calculated data be displayed accordingly. Can some one please confirm me on how that works.
Scenario2: I have one input layout and 2 output layouts. The input layout has a GPS assigned which will be executed before layout change and the first output layout has another GPS assigned which is basically a push button. Then how does this work.
Points will be assigned . Help is greatly appreciated.
Thanks,
VamsiGPS will not be executed when you open any of the output layouts but will be executed only when you open the input layout. Yes, the calculated data gets stored in planning buffer so it will the displayed in input/output layouts accordingly.
Scenario2: The GPS assigned to input layout will be executed when you open the input layout. GPS which is assigned to output layout in the form of a button will be only executed when user will click on that button. Calculated results will be available in all the layouts as the result remains in planning buffer until user explicitly click the 'SAVE' icon in applpication toolbar. -
Any hints of how to exclude these lines from the following BEx output?
Hi,
I have a BEx report which outputs the following shipment activities, showing Doc and Items numbers, Requested and Received dates, actual and PO quantities.
DocNoItmNoReqDate-RcvdDate-PO_Qty-Act_Qty---TB%
1101-----5--12/10/05-12/5/05020--
80
1101-----5--12/10/05#00--80
1101-----5--12/10/05#200--
80
1101-----7--12/10/05-12/5/05030--
50
1101-----7--12/10/05-12/8/0505--
50
1101-----7--12/10/05#00--50
1101-----7--12/10/05#350--
50
Somehow, I am getting some activity lines which I do not understand but do not want in the output. Those are the lines which show u201CPO_Qty = 0 AND Act_Qty = 0 at the same time.u201D i.e. the highlighted lines.
Any hint on how to eliminate the highlighted lines from the output?
I played with calculated key figures but could not reason it out.
ThanksDocNoItmNoReqDate-RcvdDate-PO_Qty-Act_Qty--- Formula TB%
PO QTY + ACT QTY
1101-----5--12/10/05-12/5/05020----- 20 -
80
1101-----5--12/10/05#00-- 0 -80
1101-----5--12/10/05#200----- 20 -
80
1101-----7--12/10/05-12/5/05030----- 30 -
50
1101-----7--12/10/05-12/8/0505--
5 -
50
1101-----7--12/10/05#00----- 0 -50
1101-----7--12/10/05#350----- 35 -
50
Create Conditions over the Formula. Since the sum would be always 0 only when both the KF's are zero I think you can create condition over this formula.
Would this help?
Regards
VJ -
Date format in Bex Output should be changed while using with Text Variable
I am using a Bex Query where have defined a Text Variable with replacement path. So whatever Date user enters in the selection screen variable (Input Variable) the same date appears in the report description.
For Ex: If user enters 30.04.2012 in Char Variable/Input Variable before executing the report, so once he executes the report the same date appears on report description like "ABC Analysis as on 20120430". Is also changes the report description whenever user changes the date in selection screen variable.
My requirement is......Date format should be come as 30.04.2012 (DD.MM.YYYY) instead of 20120430 (YYYYMMDD) in report description.
Guys could you please help me out to achieve the desired output.
Rgds,
RituPlease check if you have selected Replace with Key in that text variable.
Instead of that select External characteristic value key.
This should help you in giving the desired output.
Regards,
AL -
Delimited Org Unit(having end date Current date) are not coming in Bex output.
HI All ,
I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
Please suggest .
Thanks,
Arvind VenaiHi Arvind,
As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
There mught be some restriction in BEx Query , please check -
Line items to be clubbed and shown as single record in BEX output
Hi All
I needed help in BEX
The late days are calculated on basis of clearing date , due date which is not shown in output
Currently I have output as
Plant Customer Amount Late Days
A C1 100 20
A C1 200 30
B C2 100 15
B C2 150 10
Need output as
Plant Customer Amount Late Days
A C1 300 50
B C2 250 25
Regards
AkI have posting date which user enters on selection screen.
Now this posting date I need to compare with clearing date
and if clearing date is NULL or greater than posting date
it should display the records.
I have created 2 variables ZPOST_SO ( user entry) ZCLARDAT ( customer exit)
I have written exit but there is a bug in it.
Please advice what changes need to be done to the code or any other approach
Data: l_s_var_range3 Type RRS0_s_VAR_RANGE,
l_s_var_range2 type RRS0_s_VAR_RANGE,
postingdate Type /BI0/OIPSTNG_DATE,
clearingdate Type /BI0/OICLEAR_DATE.
CASE i_vnam.
WHEN 'postingdate'.
IF I_STEP = 2.
READ TABLE I_t_var_range INTO l_s_var_range3 WITH KEY VNAM = ZPOST_SO.
READ TABLE I_t_var_range INTO l_s_var_range2 WITH KEY VNAM = ZCLARDAT.
postingdate = l_s_var_range3-low.
clearingdate = l_s_var_range2-low.
If clearingdate >= postingdate or clearingdate is INITIAL.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = clearingdate.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDCASE.
Regards
Amit -
Hello,
I have a working SAP MM system. Purchase orders are printed using sapscript.
I have a new requirement for an additional PO layout. So, the PO processing will be done in the same plant, company code, etc, but the layout should be different for some materials. I need your advices regarding how to differentiate these materials (I have low MM customising knoledge).
Should I define a new purchasing organisation, new message type, new order type...etc. ?
Can you describe me step by step what should I do to configure this new layout? The creation of new sapscript is not a problem.
ThanksHi Marisca,
You can set all customizing in TCODE NACE and 'fine-tune' in: SPRO -> Material Management -> Purchasing -> Messages ->Output control -> Message types -> Define for PO.
Create entries by copying everything from the output you already have.
The diference will be in the table for the acess sequence. Here entry a new field for material or material group (for you to create the new differentiation scheme).
Start exploring and copying the NACE entries and then come again to the forum.
In NACE use application 'EF' and explore the 4 menu buttons.
Regards.
Maybe you are looking for
-
Hello, when i try to update my ios 6 to 7 but i have a problem when i click on Update on the itunes and he is doing something " Extracting Software" and after this its doing backup iphone - and then the error come: http://jpg.co.il/view/5284a171279f5
-
We are doing technical upgrade from 4.6C to ECC 6.0. After we are through with the SPDD and SPAU modificaitons in the development environment, do we need to Functional Unit Test (by unit test, I mean complete fucntionality test) in there for all the
-
Item category 02000 not allowed in accounting transaction 0300/0001
Hi Experts I am trying to post transcation through FB60, I am getting the following error "Item category 02000 not allowed in accounting transaction 0300/0001" Can you please suggets Regards Sreenivasulu
-
This has been happening for several days now...the tabs are shown on the tab bar, but do not open up or close when i try to close them....when i tried 'close all tabs', which then says 'you are trying to close 2 tabs', they are not counted as being o
-
I am trying to figure out how to name a photo in iPhoto6. It seems like it should be simple, but I just can't do it. It would also be handy if the pictures that are already in an album would be marked as such in my library. Is there a way to do that?