Bex Patch level for Windows 7 and SAP GUI 710

Hi,
We have the machine with following config:
O.S - Windows 7
SAP GUI - 710
MS Office 2007
When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
But i am not able to find any such fix for Office 2007.
Can anyone tell me what should be the patch level of Bex in this case?

Hi,
What is the exact error message you are getting?
Thanks
Riyez

Similar Messages

Patch levels for Oracle and kernel

Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveen

hi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated?

Questionnaire for users of SAP GUI (closed)

When using SAP GUI *) for a while, users tend to open new session windows and maybe new connections to other SAP system instances as well. With the increasing number of windows, it can be difficult to find and switch to the session you want to proceed working with.
SAP is currently looking into ways to improve the session handling in the SAP GUI. Options including a <a href="http://en.wikipedia.org/wiki/Multiple_document_interface">multiple document interface (MDI)</a> or <a href="http://en.wikipedia.org/wiki/Tabbed_document_interface">tabbed document interface (TDI)</a> approach are being discussed. The latter has been adopted by many web browsers for similar reasons.
In order to ease the process of finding an appropriate interaction model, it would be helpful to have a good understanding of how people are working with the SAP GUI today.
For this purpose we would like to ask you to provide feedback on the questions below. You can either directly reply in this thread or send a mail to woersi (at) sap (dot) com with the subject starting with "Questionnaire".
Note: The new approach will be an additional option and will not replace the current implementation.
1. What is your role using the SAP GUI?
a) admin/technical/developer
b) business user
c) consultant
d) other
2. Do you think the multiple document interface or tabbed document interface could make handling of multiple windows in SAP GUI more convenient?
a) yes
b) no (better to leave it up to the window management of the platform SAP GUI is running on like entries in the Windows taskbar)
3. In how many different SAP systems are you (or the users in your company) typically working in parallel?
a) one
b) two
c) more
4. How many sessions in total do you (or the users in your company) have open in parallel?
a) one or two
b) three to six
c) more
5. What do you think is the preferred window arrangement for end users?
a) each SAP session in a separate window
b) all SAP sessions (of all connections) in one single window
6. How would you like to use the SAP Easy Access menu?
a) show it only at the beginning like it is today
b) display it on request (like after clicking on some area) when you want to launch a new transaction
c) you are not really using it
7. Which SAP GUI(s) you are using in your company?
a) SAP GUI for Windows
b) SAP GUI for Java
c) SAP GUI for Html
8. Please add any comments you may have regarding the questions above.
Please send your feedback by July 27th at the latest.
Looking forward to your input.
Rolf-Martin Woersinger
SAP GUI for Java project lead
*) Please consider the term SAP GUI representing both SAP GUI for Windows and SAP GUI for Java

1. a)
2. a) yes
3. one or two (but almost always, with multiple windows (e.g. 6) in
each system.
4. Usually, three to six - but ten isn't unusual.
5. a) each SAP session in a separate window (because it makes
comparisons between sessions easier - also it helps with cutting and
pasting between sessions).
6. b) display it on request (like after clicking on some area) when
you want to launch a new transaction
7. a) SAP GUI for Windows and b) SAP GUI for Java
8. On the Mac implementation of the JavaGui, the Windows menu
currently identifies sessions by a System name and a session number
(for example, "Dev(3)"). I'd really like more information to identify
the session, perhaps adding the transaction code (for example,
"Dev(3)SE38").

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

How to find the latest SAP patch release for SRM and BI 7.0?

Hi experts,
I know how to check my sytem patch level in BI 7.0 and SRM. My question is how and where to check the latest patch level on SAP service market place.
Thanks in advance.
Sharat.

Hello,
Goto service.sap.com -> software download -> sap support packages -> Entry by application group -> Sap Frontend components -> SAP GUI for windows
In SAP Frontend components you have patches for BI add-on too.
Assign points if this helps
Regards,
Jorge Diogo

What is HR new Patch level for SAP 4.7

Hi all,
What is the HR new Patch level for SAP 4.7 and GUI 6.4.
Thanks In advance.
Satish

Hi Satish,
The best and the most authorplace to find that information would be the SAP service Marketplace. Go to <a href="https://service.sap.com/ocs-schedules">this link</a> and you should get it.
Regards,
Anand Mandalika.

SSO E-Sourcing and SAP GUI for HTML

Hi,
We are trying to provide integration between SAP E-Sourcing and SAP ECC via the SAP GUI for HTML. From an E-Sourcing project, we should define a link which will link us to the report via SAP GUI for HTML. Some parameters are automatically transferred via the URL so that the report will be prefiltered.
The problem arises that we cannot create a SSO mechanism between SAP E-Sourcing and SAP GUI for HTML. The only documentation we can find is how to setup this SSO between the Portal and ESO (only included going from the EP to ESO). We need to find a way to do the opposite, i.e. SSO from ESO to SAP / EP.
Thnx,
Bram

Dear Chong,
I have came across the following information about SAP GUI For HTML
With the version 7.02 / 7.20 of the NW Application Server
the SAP GUI for HTML has been completely
reworked.
1.The rendering is now based on Unified
Rendering which is also used by many other
SAP UI technologies.
2.Similar Look & Feel as other UI technologies
3.Better Portal integration
4.Full Theme support
5.Unified client requirements
But have not came across any note which converts the SAP GUI for HTML to SAP GUI for Windows in appearacne. I think the point 2 mentioned about says that in this version the SAP GUI for HTML will have appearnce like the other UI.
Pls refer the [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06db80d-ebf4-2a10-6b99-faa652c69d5c?QuickLink=index&overridelayout=true]
Hope it helps.
Regards,
Samir

R/3 Patch level for SAP BW 3.5

I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
thanks a lot...

Hi,
You would find the info on http://service.sap.com/instguides based on the OS and the database.
Bye
Dinesh

How to find out SAP J2EE Patch Level for 04s

Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif

Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif

NWBC Side Panel and SAP GUI Scripting

Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Some of our users are getting pop up messages that say "The scripting support is not installed"... interestingly they don't actually appear to be opening a side panel when they get this message.
I noticed that these users don't actually have SAP GUI scripting installed at all, so not that it is just not enabled, it is not installed in these cases. So does the above section from the help documentation mean that SAP GUI scripting must be installed on the client PC but it does not actually have to be enabled?
That's how I am currently reading it... but perhaps someone can clarify for me, or someone else has had a similar experience.
Thanks,
Simon

Hi Simon,
As written in the documentation you quoted:
Simon Kemp wrote:
Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Meaning: SAP GUI Scripting need to be installed on the client PC, although it is not required to activate it:
Regards,
Claudia

Difference between using the Enterprise Portal and SAP GUI

Hi Gurus,
Could one of you please send me a document that lists the differences between the Enterprise Portal and SAP GUI?
thanks in advance

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BI Precalculation Server for BI 7.0 (SAP GUI 710)? Not Available?

We recently upgraded from BW 3.5 to BI 7.0 SP 15. To support other SAP company initiatives, we also upgraded all SAP GUIs to 710.
Is there no updated BI Precalculation Server for BI 7.0 with SAP GUI 710? Can we use older precalculation software with BI 7.0? Or do we have to wait until SAP publishes the precalc server for GUI 710 (as indicated by note # 1013205)? Anyone know when that might be?

I created opened a message with SAP and here is the response I got back:
Dear Customer,
Currently SAP GUI 7.10 is not supported with Precalulation service.
As per Note: 1013205 Pre-Requisite for BI Precalculation service 710
The program is believed to be shipped with the patch 400 of the 7.10
Frontned.
Patch release schedules are available in note 1085218.
Patch Delivery Schedule for BI 7.X Frontend on SAP GUI 7.10
Patch #400
o Current Status: Retest
o Planned delivery Date: first week of 2008

Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

Need patch ID for Linux 64-bit equiv to 10.2.0.4 patch 17 for Windows 32-bi

Need patch ID for Linux 64-bit equiv to 10.2.0.4 patch 17 for Windows 32-bit
Hello,
We are transporting a database from Windows 32-bit to Linux 64-bit. Version/Patch on the Windows machine is 10.2.0.4.0 (10g Release 2 Patch Set 3), interim patch 8258839.
How do I find the equivalent patch set for the Linux 64-bit environment? We need to have the Linux environment at the same patch level.
Thank you, Tim

AFAIK, the interim patch concept is only applicable to Windows. There is no Linux/Unix equivalent. See these MOS Docs
268895.1 - Oracle Database Server Patchset Information, Versions: 8.1.7 to 11.2.0
342443.1 - 10.2.0.x Oracle Database and Networking Patches for Microsoft Platforms
Pl open an SR to confirm.
HTH
Srini

Bex Patch level for Windows 7 and SAP GUI 710

Similar Messages

Maybe you are looking for