BEX QUERRY
i have a requirement compare the data from two dso can we add both dso fields in one querry and create a report?
Search the Forum . you will get many threads which will help you. You can refer the following linki as well.
http://help.sap.com/saphelp_nw70/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/cf/bc734190ba137de10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/4d/c3cd3a9ac2cc6ce10000000a114084/content.htm
Similar Messages
-
Javascript Error while executing BEx querry from browser
Hi Folks
We have been getting a number of Javascript errors while executing BEx querries from the browser.
The various errors that we have been getting are:
'SAPBWItemCatalog' is undefined
'SAPBWJSgdo' is null or not an object
'SAPBWShortCutCatalog' is undefined
We have already looked at SAP Note 783496 and validated the solution.
Is there some specific settings that needs to be maintained for this?Hi Sandip,
Just spent 2 hours chasing this one so I know how frustrating it is.
Solution:-
Check mime service in SICF - dafault_host/sap/bw/mime - if it's greyed out activate it.
Regards
Nev -
Unable to view report from Bex Report Designer
Hi,
When I log on to Bex Report Designer, I click execute button, it is giving a blank page. It is neither giving any error nor any message. We have recently installed NW2004s and BI Cont 703. Now my problem is how to make report visible in the BEX Report Designer.
Thanks,
SubhaniDear Prakash,
Thanks for the quick reply.
I have religiously followed your Blog. As far as I know any one who wanna setup BEx has to follow this. It is the one place where all the settings related to BEx front end were discussed and disclosed. Thanks a lot for your exemplary attempt.
Though you have mentioned about the .NET frame work I could not understand how it will effect the "insert" menu of BEx report designer. But i have checked that also and its matching with your recommendations.
My question is pretty simple. With sapgui6.40compilation5 with all the latest patches both for gui, BW and BI. Will i get the options of <i>"Report section", "Report section based on Querry"</i>in the <b>"insert"</b> menu of BEx report designer.
The mentioned options <i>"Report section", "Report section based on Querry"</i> were shown in the webnair of BEx report designer. Pls check the link:
(As per the SDN these menu items should be available in BEx report designer..Pls observe the Insert menu in the very first few seconds)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9c059b57-0701-0010-3283-e5e8669f827e
We have installed and upgraded the system to spstack 8 and done all the settings. Our front end is also updated with the service packs. But we could not get those options. If you can give me your mail id i can send you the screen shots.
Thanks & Regards,
Sridharb -
Hi,
While executing one particular query in BEx I am getting the error message: "System Error in program CL_RSR_GRID and form FILL_AXIS_SET_LINE:TX_MN_MISSING" . The rest of the reports are running fine. the users needs to test this particular query. Any ideas.
Thanks.Hi,
I am Also facing the same prblem when refreshing Querry. can u tell me what r the steps u taken.
How can we check and all.
Thanks in Advance!!
Regards,
Rukmini. -
Sample SD reports in querry designer
Hi,
We want to see the sample SD report at queerry design.we mean that. We want to check out sd reports querry designer to see how it is creating?
Any link ?we are really appretiated..Hi,
Designing SD queries or any queries depends on client requirement (refer report template) and you design query on top of IC/DSO/Multiprovider mostly with effective performance.
Use following Bex Functions and design query. understand each function properly and use them to improve query performance.
- Generate index.
- Build query on multiprovider and better use Constant Selection Function to bring infoset functionality to Multiprovider.
- Make your query more dynamic using variables.
- Do partitioning on IC when you have restriction on 0CALMONTH.
- Use more free charecterstics.
- Use include than exclude at Bex level.
- Utilize Cache mode and Read mode functions.
http://help.sap.com/saphelp_nw04/helpdata/en/9d/76563cc368b60fe10000000a114084/content.htm
Regards,
rvc -
The standard transport system is active. BI querry on Poral
Hi All,
I am getting the error when saving the querry in BI ie when I click "Save As" button a dialog window opens and in "favourite" tab
i give description (any text ) and click Ok button. Then i get the following error :
The standard transport system is activeYou cannot save
This is carried out in portal.
Please help
RegardsHi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya. -
every time i save querry its always save in my favourite folder which i have on sap login screen how do i remove this any idea.
Hi ,
When you save query , on the left side you see Favourites & Roles buttons you can save them any where you like .
Though you save query in your favourites it will be on your data targets .
If you want to delete queries go to bex query designer , navigate to your query and right click and delete . the query will be deleted permanently .
Regards
Santosh -
IF and ABS condition statement in BEX query designer
Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
ArnoldHi Arnold,
Thank you,
Nanda -
Inconsistency between Bex and Back end
Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this:
ZField
000000000000000000008
It shows correct in DSO table but in Bex it only shows the zeros. do you know why and how to get this to show the whole field value?
Thanks.
By the way this is a characteristic and not keyfigure.Hi Vekant,
If you have not did any speecific thing at query level then value should be shown correctly.
Please try this once and check.
Create new test query on your data target drag and droup your charecteristic.please execute your test query and see if you are able to see the correct value.
try this.
Regards,
Ganesh Bothe -
Error while trying to Open and Delete a BEx Query in Query Designer.
Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
ChanduArun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu -
Report performance while creating report on BEx
All all!
I am creating a report on BOE 4.0 on top of BEx connection as a source. I have developed reports on top of universe in the past and i know that if we keep calculations on reporting end it hampers the report performance. Is this the same case with BEx? if we are following the best practices is it ok to say that we should keep all heavy calculations/ aggregation on BEx or backend for better report performance.
Can you guys please provide your opinion based on your experiance and knowledge. Any feedbacks will help! Thanks.Hi,
Definitely best-practice to delegate a maximum of CKF to the Cube where possilble, put RKF in the BEx query, and Filters too.
also, add Default Values to your Variables (this will speed up generation of the bics transient universe)
also, since Patch2.10, we are seeing some significant performance improvements reducing 'document initialization' and 'time to prompts' by up to 50% (step such as these often took 1.5 minutes, even on sized systems)
Also, make sure you have BW corrections like this implemented: 1593802 Performance optimization when loading query views
In the BusinessObjects landscape - especially with BI 4.0 - it's all about Sizing and Tuning . Here is your bible the 'sizing companion' guide : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000738725&_OBJECT=011000358700000307202011E
Pay particular attention to BICSChunkSize registry settings
Also, the -Xmx JVM Heap Size for the Adaptive Processing Server that is running the DSL_Bridge service.
Regards,
H -
Hi
I created a query in Bex-Query Designer - 3.5.. Then publish that report in the Web by using Bex-Analyzer.
Suppose i have columns in the report like 'vendor' and 'PO Number'. When the cursor goes to 'vendor' column heading then im getting as <b>"Context Menu for vendor"</b> by default.
i dont want by default .. I want to make this by custome (like i want Vendor Analysis) . How can i get this
please let me know
kumarHi ravi
Yaa im asking same thing. When i put cursor on the 'vendor' or 'PO number' then im getting "Context Menu for vendor " or "Context Menu for PO Number" by default.
I dont want this one. I want custom one like "vendor Analysis" or "PO Analysis".
How can i get this one . pls let me knpw
i ll assing the points
kumar -
How can we remove the commas from the Formula value in SAP BW BEx query
Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards -
Concatenation of Data from 4 infoobjects into a single cell in Bex Report
Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
<b>****Points will be awarded***</b>Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
<i><b>****Points will be awarded****</b></i>
Regards,
Hitesh Shetty. -
Variable screeen popup with button in bex
Hi ,
When I try to display variable screen using a button in bex, I get the following error. has anyone come across this. pls advise.
BExItemButton.RenderData01: Unable to get the Item property of the OLEObjects classErr: Unable to get the Item property of the OLEObjects class
KartheekSounds front end related, are all your Front end patches (FEP) upto date. Might be worth downloading FEP 11.
Cheers,
Pom
Maybe you are looking for
-
Installing Duplexer from a Script
Hi all, I have close to 300 HP Printers of various types, many of which have Duplexer installed (Physically), but Duplexer is set to Not Installed on the Device Settings tab. I need to create a script that will flip that bit on all of the printers so
-
Access SLD failed during SWC import
Has anyone seen the following message 'Attempt to access the System Landscape Directory failed'? SLD is up and running and I can create business and technical systems. When I go to import the software component from within the integration builder,
-
iphoto has stopped transferring my photos from my Nikno coolpix s7c camera. Seems like it stopped when I upgraded to Lion? It continues to work with a PC?
-
How can I change brush size?
I really have two questions. 1. How can I change the size of the brush tool? It's all greyed out on every project I start, stuck at the very smallest size (0.10). I'm trying to trace over a photo at the moment, and it's taking FOREVER with the tiny l
-
Nikon D800 Definitely NOT Supported in ACR RC 6.7 or in Photoshop CS6 beta with ACR 7
It's been my experience that I am unable to view RAW images shot by my new Nikon D800 with ACR 6.7 installed, or with Photoshop CS 6 beta which includes an ACR 7 plug-in. This is true whether I'm shooting in Live View or not. Anyone else having diffi