Bex Query Broadcasting Problem

HI ,
            My Enterprise Portal is working fine in sense that it is showing me the accurate result of query
But when i am trying to broadcast it , it gives me the error saying OPERATION TIME OUT in the browser.
I also checked the TCP/IP connection but it is working fine.
please help .

Hi Suhas,
    You can check this post: BEX query time out in portal
Venkhadesh said that:
Please refer to note Note 824554 which will help you in maintaining the ICM time out parameter values.
824554   ICM and SAP Web Dispatcher Timeout Parameter
Please refere also to the note:
1044330 - Java parameterization for BI systems
1127156 - Safety belt: Result set is too large

Similar Messages

  • BEx query change problem

    Hi there,
    In QA, when I try to open the local view or global view of a query in BEx, I am getting the following error/message
    "The following objects were not found when accessing the server.."
    -Press Repair to correct the problem(incorrect parts of the query are automatically deleted)
    If anyone has faced the issue kindly let me know.
    Thank You
    Ace

    Hi Ace,
    Welcome to SDN!
    It seems the objects mentioned in the message were not available in the dataprovider on which the query is based, hence the query designer is trying to correct this (which is a default behavior of the query designer).
    This can happen if you had those objects in the datatarget initially and both the datatarget/query were transported into QA initially, and subsequently any of those objects may have been removed from the datatarget definition, and when the latest objects are moved to QA, by default query designer detects it and prompts you for the correction.
    So, after validating the fact that those missing objects were removed for valid reasons from the corresponding datatarget definition, click on repair and you should be able to continue further.
    Hope it helps,
    Sree

  • BEx Query Execution problem

    Hi,
    I got a problem when I click Execute button in Query Designer to run a query. It popup a IE windows with a URL like below
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=PM_SALES_ANALYSIS&VARIABLE_SCREEN=X&DUMMY=2
    Apparently, the URL is wrong. It seems it try to connect to EP server to run the query. But I donnot have a EP server. What I just want, the query running via BEx web service. The expected URL should be
    http://SERVER:PORT/sap/bw/bex?QUERY=PM_SALES_ANALYSIS&VARIABLE_SCREEN=X&DUMMY=1
    Some configuration in SAP BI 7 server,
    SICF --> test BEx service works fine
    RSPOR_T_PORTAL not maintained(No entry)
    Environment: Only SAP BI 7 without EP
    Is there anybody can help me on this? How can I check and configure to fix this problem? Thanks a lot in advance.
    Thanks
    Nanshu

    Hi Wang,
    You could check the setting in SPRO transaction through following path:
    in the SAP Reference IMG under SAP NetWeaver -- > Business Intelligence --> Reporting-Relevant Settings --> BEx Web
    You can also assign standard web templates to all your queries from here.
    Hope this helps.
    Regards,
    Vidya

  • Bex query  error problem

    Hi Friends,
    1) when i am executing the query it is showing below error.
    Please give me solution how to slove below problem:-
    Error no sid found for value 'TB' of Characteristic 0UNIT error
    error while reading the data; Navigation is possible.
    2) Variables selection not appearing while executing query
      i created 2 variables on plant and  material these variable screen is not appearing while executing the query.
      it is showing empty screen. Plz give me solution how to solve.
    I am waiting for your replies.
    thanks,
    Guna

    Hi Ravi,
    I did all the things waht u gave the tips before thread,
    This query is created by on infoset.
    infoset is combination of  different master data.MARA and MARC this master data loaded in to ZWMAT_PLT.
    MARD table master data loaded in to 0MAT_ST_LOC.
    MKAL table master data loaded in to DSO ZWPROVER.
    i created info set using ZWMAT_PLT,0MAT_ST_LOC and ZWPROVER.
    i created query on infoset. when ever executing this query i faced same problem.
    another thing is variable selection screen also not appearing.
    Please give me help on this issue.
    Thanks.
    guna.

  • BEx Query Designer problem when generate URL to IE

    Hello everyone,
    When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
    And IE display that "The address is not valid".
    I think the reason is  that there are some configuration not do.
    Could any guys tell me what configuration should be done ?
    Thank you!
    BR,
    Louis

    Hi,
    I think the Bex service is not confirgured correctly in your system.
    For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
    Refer to the hot to document on SDN:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
    Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
    Regards,Shilpa

  • Bex Query output problem

    Hi Experts,
      Plz go through the fallowing scenerio and answer the question.
      For a customer opprtunity should be within the scheduled 18 months of time period.That means if RFP(Request for propasal) is on
    particular date and the scheduled award date is on particular date.If the scheduled award date is not fallowing in the 18 months time span then that award date need to be considered for report generation.
      Here we are getting  both RFP and award dates  from CRM systems.
    How can we calculate the 18 months irrespective of the begining months.?

    Hi,
    Take Both Dates in to Report.
    Create 2 Formula varible on Respectively on Both Dates.
    Create A formula .And use the above 2 Formula variables in the Formula like : FarVAR1 -FARVAR2.
    Create a condition on the formula to hide rows which does not give Formula = 18*30.
    Other option is
    USe a KF in cube itself and USe a Formula to get difference between dates.
    With rgds,
    Anil Kumar Sharma .P

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • Problem while opening Bex query on the web

    Hello BW experts,
    I have a problem while opening Bex query from my SAP Favorites.See below.
    When i double click on the query, i get the following page, with the server name KBWS01QX.
    But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
    My question is why is it going to the wrong URL when i open it from  SAP Favorites menu?
    I want it to open the same URL as it opened from RSRT(which is the right one)
    What is the Config needed to make it to work from SAP favorites.
    Any help would be appreciated.
    Thanks alot.
    SV

    Hello,
    Thank you all for your responses.
    See below some additional info.
    From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
    http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
    Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
    It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
    Please help.

  • Problem about printing special character in bex query analyzer

    Hi,
    in bex query analyzer i have created one restricted key figure , in which i have substracted two date with the help of replacement path.
    So i got result.
    But i am facing one problem. when in both date, if one date is null or # then it is giving some big value like -734567.
    But i want some special character like X instead of this big values.
    So how can i do this?
    With the help of if and else it can be done.
    But how can we print special character in report.
    Please help me
    Thank you in advance

    hi,
    You cannot show X in a formula result. You can highlight the row using exception.
    Still if you want to show X in the result then you need to create a formula variable on a char which returns X value all the times.
    Then you can use the three formula variable to write a formula so that it shows the difference:
    date1 -- formula variable
    date2 -- formula variable
    charx -- formula variable.
    the formula will be
    Count(date1)Count(date2)(date1 - date2) + charx *(count (delta(date1) + delta(date2))).
    this would return the X value if any of the dates are empty otherwise their difference.
    regards.
    Arvind.

  • Problem in BW system while tranporting a change in a Bex Query

    Hi All,
    I am facing a problem in BW system while tranporting a change in a Bex Query. Actually on our BW system our Client team works as well. I have done started doing some change in query in dev. I have created bex transportable request
    I want to transport a change in bex query. I am doing that dev work. usually i create a request in RSA1->tranport connection-> drag a query to a bex transportable request which I have already created. But the problem is my client also want to work on the same query for another change. so he is asking me to release the request or delete the request.. Is there any otherway that I can do the transports without conflicting with Client.
    Regards.
    haaris

    Hi Harris,
    A transport request if is BEx transport request (i.e. a request which is assigned as BEx transport request in transport connection) allows multiple users to work on same query.
    Instead of deleting your request, you could assign it as a BEx transport request in transport workbench and your client can also make changes under the same request without adding him under the request. It will also be better as all the changes made to one query will be onder one request.
    Please let me know if you need any more help.
    Regards,
    Pankaj

  • Problem with a Bex Query Report with Web Intelligence

    Hello!
    I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion.
    I wonder if there is a solution for this or if it is a problem of version 4.0 of Web Intelligence.
    I await your response,
    Greetings!

    Hi,
    Whereabouts in the application are you seing this problem?  (in the query panel conditions, in the prompt list of values, or in the table block? )
    also, what do you mean by "and it is strange because other cubes if given by the conversion" ?
    it's worth noting that the "key and text display properties" in the Bex Query Designer do not influence webi.  WebI consumes the global infoobject property from BW RSH1.
    Regards,
    H
    p.s. if you need to understand which features are or are not supported with BI 4.0 tools, please look here: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5

  • BEx Query Designer Opening Problem

    Hi Guys,
    I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
    Component 'BEx Query Designer': available version 154, version 229 required.
    Before you can continue you have to run the front-end setup.
    please let me know to resolve this issue.
    Thanks
    Murali

    Hi Murali,
    To make sure it works, you should make sure that:
    When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
    Install the latest front end patch (BI patch 7) from SAP Marketplace
    I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
    It works pretty well for us, I am sure you will also eventually make it work
    hope this solves ur problem....
    Regards,
    Bala...

  • Problem Bex Query Designer

    Hello,
    Our BI guys are facing a problem with the too - Bex Query Designer.
    They want us to update the version of the Query Designer.
    Can you please guide me as how do I obtain the latest version of Bex Query Designer.
    My current version is - release 2004s SUpport pack - 0, revision 418
    Thanks.

    have a look at this
    SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
    Regards,
    Ravi

  • Input control -Check Box Problem in webi4 over Bex query

    Hi All
    i am in webi4 over bex query
    my customer requirement is to have the option to select multiple values from object (e.g Document class) with out the need of presenting the field(e.g document class) in the report
    when I use the input control check box or list box i have the following problem
    if I select from the input control all values I see the report ok
    if I select 2 values from the list I receive #UNAVAILABLE , but if i add the field to the report ( the document class) it works fine.
    the problem is that  if I don't have the field in the report i get the #UNAVAILABLE
    any assistance is appreciated
    Thanks

    Hi,
    this question has been asked many times before on this forum, so do please search first.
    Here's some steers : http://forums.sdn.sap.com/thread.jspa?messageID=10852102#10852102
    and : http://forums.sdn.sap.com/thread.jspa?messageID=10838993#10838993
    Also, do search the knowledge base articles over here in the cross-search: www.service.sap.com/xsearch
    you keywords would be "4.0 webi #UNAVAILABLE"    (there are 12 sap notes about this)
    Finally, make sure you use all the latest Patches (Patch2.11,  2.12 next week) to include corrections.
    Regards,
    H

  • BEx Query output in Enterprise Portal using "Information Broadcasting"

    Dear Experts,
    I am having BEx Query output in Enterprise Portal
    EP 6.0 and BW 3.5 version
    I am trying to send email attachments from
    Portal Query directly
    using "Information Broadcasting"  tab button
    ==================================
    Email gets triggered Okay,
    but Portal URL link is not showing correctly
    Here is an Online Link to the BI Document: http://mtv01spbw01.businesssap.com:8100/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001
    <b>The URL above is coming wrongly,
    I want it to point to
    http://mtv01spbw01.businesstree.com:8000/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001</b>
    Please help me to correct this error / wrong configuration
    any help links would also be appreciated
    Thanks,
    Aby Jacob

    Hi Jacob,
    Here, p/s refer to this links.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    OSS Notes : 760775
    Hopefully it can helps you a lot.
    Many thanks.
    Regards,
    Niel.
    (Many thanks for any points you choose to assign).

Maybe you are looking for