Bex query crash for user on sap portal

hi gurus
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

Similar Messages

Bex query crash for a user on sap portal

hi gurus ,hope this thread match here...
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

Hi Arjun
Please check the SAP portal and BI system version and then check the compatibility for BEx Query in IE9.
Refer to http://service.sap.com/pam >> Click on SAP Netweaver version, here you can find the PDF files.
BI (BEX Web) is supported on IE9 with SAP porta version 7.0 SPS24 in vista or windows 7 if you SAP portal version is 7.0
Best Regards
Arun Jaiswal

Unable to replicate SRM users in SAP Portal

Dear All,
We've followed the below link to auto replicate the SRM Users in SAP Portal:
http://help.sap.com/saphelp_srm70/helpdata/en/08/bae789ee8743d5b4cb2fbf93a9831b/content.htm?frameset=/en/08/bae789ee8743d5b4cb2fbf93a9831b/frameset.htm
But after doing all the configuration steps, we are yet not able to replicate the SRM users in Portal.
SPML Destination Connection test is successful and all other configurations are done and cross checked.
Is there any report program that we have to run / schedule for the user replication.
Please suggest.
Regards,
Anurag

Dear Carl,
The above link that you've shared talks about replicating user accounts from UME to the SAP System.
However in our scenario, we want the replication from SAP system to UME. So, it's a reverse scenario.
The link that I've shared above in my thread talks about my scenario and in fact we've done all the configuration steps also.
But it is not working at the moment and I believe that there must be some additional setting / trigger point that would initiate the replication.
If somebody has already come across such scenario, please advice.
Regards,
Anurag Gwari

Is there a Oracle site for user to practice Portal?

Hello,
Is there a Oracle site for user to practice Portal?
Thank you for your attention,
Emily123

Not exactly, but you can do some of this at http://portalstudio.oracle.com like (testing your portlets). It might be a helpful resource for you too.
Portal is a rather easy setup too if you have a system with at least 1.5 GB of RAM where you can install the infrastructure & middle-tiers on a single system. But I'd still look at this site to see if it has resources that help you with your Portal development.
I hope this helps.

How to view a BI query with anonymous user in the portal

Hi Gurus,
Does anybody knows how to view a BI query in the portal with anonymous user?
Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if the user logged in it shows the roles that previously were assigned.
I have the Netweaver 2004 with SP9
Thank you Very Much

do you have sso configured between portal and BW server, if yes the authentication pop up should not come.
if you dont want to do sso between portal and bw server and still want to logon to BW query with anonymous user,
in you bw server go to transaction sicf and navigate to DEFAULT_HOST->SAP->BW->BEX and double click on bex node in the resulting window, log on details section provide a default userid/password
Raja

Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald

Vendor user in SAP PORTAL

Hi experts
I am configuring EBP-SUS and my vendors will use for bid responses, but ineed the vendors access SUS via SAP PORTAL, so when vendor receive an e-mail with user and pass to create a adiministrator after create a user bidder that must have access in SAP PORTAL to receive bids, the problem is in Supplier Relationship Management - Supplier Self-Services - Master Data -Maintain Systems for Synchronization of User Data I can use only logical system and the creation is done using RFC call, and SAP PORTAL IS a java aplication.
Some help will be welcome.
Nilson

Hi Nilson,
Can you please explain the issue with more clarity.
Thanks,
-Devi Swain

MSS Customizing Steps for MSS within SAP Portal

Hi HCM-experts!
I would like to integrate MSS functions within SAP Portal.
Where can I find the suitable technical documentation describing the steps with tcode/reports, SPRO steps for:
- Team Calender
- Assigning the user to Organization and to Staff
- Budget
- Projects and Planning functions
Any technical information will be very appreciated!
Holger

Please go to help.sap.com
here is the link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm

Questionnaire for users of SAP GUI (closed)

When using SAP GUI *) for a while, users tend to open new session windows and maybe new connections to other SAP system instances as well. With the increasing number of windows, it can be difficult to find and switch to the session you want to proceed working with.
SAP is currently looking into ways to improve the session handling in the SAP GUI. Options including a <a href="http://en.wikipedia.org/wiki/Multiple_document_interface">multiple document interface (MDI)</a> or <a href="http://en.wikipedia.org/wiki/Tabbed_document_interface">tabbed document interface (TDI)</a> approach are being discussed. The latter has been adopted by many web browsers for similar reasons.
In order to ease the process of finding an appropriate interaction model, it would be helpful to have a good understanding of how people are working with the SAP GUI today.
For this purpose we would like to ask you to provide feedback on the questions below. You can either directly reply in this thread or send a mail to woersi (at) sap (dot) com with the subject starting with "Questionnaire".
Note: The new approach will be an additional option and will not replace the current implementation.
1. What is your role using the SAP GUI?
a) admin/technical/developer
b) business user
c) consultant
d) other
2. Do you think the multiple document interface or tabbed document interface could make handling of multiple windows in SAP GUI more convenient?
a) yes
b) no (better to leave it up to the window management of the platform SAP GUI is running on like entries in the Windows taskbar)
3. In how many different SAP systems are you (or the users in your company) typically working in parallel?
a) one
b) two
c) more
4. How many sessions in total do you (or the users in your company) have open in parallel?
a) one or two
b) three to six
c) more
5. What do you think is the preferred window arrangement for end users?
a) each SAP session in a separate window
b) all SAP sessions (of all connections) in one single window
6. How would you like to use the SAP Easy Access menu?
a) show it only at the beginning like it is today
b) display it on request (like after clicking on some area) when you want to launch a new transaction
c) you are not really using it
7. Which SAP GUI(s) you are using in your company?
a) SAP GUI for Windows
b) SAP GUI for Java
c) SAP GUI for Html
8. Please add any comments you may have regarding the questions above.
Please send your feedback by July 27th at the latest.
Looking forward to your input.
Rolf-Martin Woersinger
SAP GUI for Java project lead
*) Please consider the term SAP GUI representing both SAP GUI for Windows and SAP GUI for Java

1. a)
2. a) yes
3. one or two (but almost always, with multiple windows (e.g. 6) in
each system.
4. Usually, three to six - but ten isn't unusual.
5. a) each SAP session in a separate window (because it makes
comparisons between sessions easier - also it helps with cutting and
pasting between sessions).
6. b) display it on request (like after clicking on some area) when
you want to launch a new transaction
7. a) SAP GUI for Windows and b) SAP GUI for Java
8. On the Mac implementation of the JavaGui, the Windows menu
currently identifies sessions by a System name and a session number
(for example, "Dev(3)"). I'd really like more information to identify
the session, perhaps adding the transaction code (for example,
"Dev(3)SE38").

TLN missing for users in Federated Portal Network Setup

Hello All,
We are facing a weird problem in our Federated portal Production setup; when the users login to portal they are not able to see the TLN. On further investigating we found that this issue is happening when the user id is locked in any of the producer portals within our FPN environment due to which the users are not able to view roles related to other systems as well in which there id is active.
This issue is reproducable but only occur once the ID are locked and password is expired in one of the assigned system.
Our FPN setup is as below:
Consumer C connects to Producers
1. A (RDL)
2. B (RDL) - BI Dual Stack
3. D (RRA) - BI Dual Stack
In turn A (producer) connects to 4 ECC systems (F3, M1, R1, R5)
We are using RRA and RDL both in our environment.We have connected all federated portal with P4 Port, so if required we
can use RDL.
Please note our consumer C is EHP1 SP5 and both BI systems B and D are EP 7 sp13.
Any help in this regard is highly appreciated as this is critical issue affecting users in our production environment badly.
Regards,
Priyanka

Hello,
This was an SAP bug. We raised an OSS message and it is taken care now. User now gets TLN and then portal runtime error if the id is locked.
Regards,
Priyanka

FI-SD data-BEx Query Logic for Amount received for the Lasts F.Year Sales

Hi Friends,
Need your assistance in designing one BEx Query,
We have Two cubes...one is sales ZSALES01 and Account Receivables ZFIAR01. On top of these cubes e built Multiprovider.
In the sales cube (ZSALES01)., we have calender day, Financial year , Fiscal period characteristics as time characteristics and Net Values as key figures. And Same way in the Account recievable cube (ZFIAR01) we have calender day( Which is mapped with Posting date), Financial year , Fiscal period characteristics as time characteristics and Credit/Debit amount as key figure.
My requiremnt is that i have to show in BEx with below scenarios.......
1.Amount received for the sales occured till Last Financial year
2. Amount Received for the sales occured in this current financial year
We have two show these values for company code wise , we have company code in both cubes nad we have financial year...and some other common fields there in both cubes.
Can you please guide me how to design the same in BE query.
Thanks & Regards,
Anand

are you saying that in your query you need to have 4 columns;
- Sales Last Year
- Sales Current Year
- AR for Sales (LY+CY)
- AR for Sales Current Year
If yes, getting Sales Information is easy. You need to use customer exit variable to get the current year (calendar or fiscal)
- for Sales Last Year, use customer exit variable for current year with a offset of -1
- for Saels Current Year, use customer exit variable for current year
For AR columns, as I said in my earlier post - use a lookup while loading data in AR cube. Use the Sales Doc Number and get the year information (calendar, financial or fiscal - whatever you want to use depending on your requirement) from Sales flow. This way you can tell if a particular FI doucment is for this year's sales or last year's sales.
Now, you can use another customer exit variable for AR column depending on the "Sales Year" infoboject. Customer exit variable shold be populated with the current Sales Year.
- for AR for Sales CY, use this customer exit variable
- for AR for Sales LY, use this customer exit variable with offset of -1
- AR for Saels (LY+CY), add both the columns above
Another way of achieving AR for Sales (LY+CY) is to restrict the RKF or value range using customer exit variable for Sales year with BETWEEN operator (From var1 to (var1-1)).
You can also use the option of replacment path variable as Durgesh mentioned. but in that case you will have to create two addition queries based on sales data which will return:
- sales documents for last year
- sales documents for current year
then you need to create two replacement path variables for AR columns which will get values from these two queries.
I hope it helps.
Regards,
Gaurav

Start and End dates for users in Enterprise portal

Hi Expert,
I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

Hello
Please check below URL for User Import Format:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
Regards,
Tapan Goyal

Querying AD for users with SmartcardLogonRequired

We are trying to write a script to query AD for all users who are required to logon with a smart card.
The problem we're having is that it is only returning 43 users out of our ~750 that are using smart cards. In AD the checkbox is set and the users' logons are working properly
Here is the command I ran first:
Get-ADUser -Filter {SmartcardLogonRequired -eq $True} -Properties *
When that didn't work I tried this, but got the same result:
Get-ADUser -Filter {userAccountControl -band 262144} -Properties *
Next I looked at individual users. My account is actually returned and when I check the property I get this:
PS > $User = Get-ADUser -Filter {SamAccountName -eq '<REDACTED>'} -Properties *
PS > $User.SmartcardLogonRequired
True
PS >
When checking an account that isn't returned I get nothing back.
PS > $User = Get-ADUser -Filter {SamAccountName -eq '<REDACTED>'} -Properties *
PS > $User.SmartcardLogonRequired
PS >
I have tried un-checking and re-checking that box but that doesn't seem to have any effect. Has anyone come across this before? Any ideas on what to try next?

To query users that are Smart Card Required, your first command was correct:
Get-ADUser -filter {SmartCardLogonRequired -eq $True}
Remember, smart card enabled and smart card required are two different things. You can have a smartcard and still use username and password, (if the SCRIL box isn't checked).
To set the account to enabled:
Set-ADUser -Identity <name> -SmartCardLogonRequired $true
To turn the requirement off:
Set-ADUser -Identity <name> -SmartCardLogonRequired $false
Remember that when you set the smart card requirement on an account, the NT Hash for the password is changed, meaning the user will no longer know their password. If you set someone to true, then false, you have scrambled the password.
Also, if you set the requirement to true while the user is logged on, you are changing the NT Password Hash in Active Directory and the user's session will have a bad hash. Whenever that user tries to perform any NTLM function, they will become locked
out.
Good luck!
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

Need the solution in the Bex Query level for a Business Requirement.

Hi BI Experts,
I have a requirement at Bex Query level and the scenario is like this:
Business Logic.
Right now am showing the Stocks falling in to time slot like 6-9 months and 10-12 months from the date of PKD in two columns B1 and B2 respectively.
And also calculating the stock selling price of B1 with 30 % discount and B2 with 50% discount.
In the above said discounts client may change the discount % in any future Quarters
Now the requirement is, if client needs to see the history of sales according to the declared Discount selling prices of stocks falling into B1 and B2 slots, he must get the values accordingly.
( Am using the Formulas for calculating the Discount % for the Stocks fall in to B1 and B2 slots)
Business Example:
For Q4 2007 The discount for B1 Stocks is 35% and B2 Stocks is 60%.
For Q2 2008 The discount for B1 Stocks is 35% and B2 Stocks is 55%.
For Q3 2008 The discount for B1 Stocks is 30% and B2 Stocks is 50%.
For Q4 2008 The discount for B1 Stocks is 40% and B2 Stocks is 50%.
Now running report ( running in Q4 2008 at some date) if client needs to check the B1 and B2 stocks in Q4 2007 or Q3 2008 the values need to come with the calculation of repective % of disounts declared in that quarters along with the selling prices in that quarter.
This all should be done at query level nothing to do at Infoproviders level.
Is there any option like storing query data as a master data and retrive it according to the selection to get the exact values of the respective % Discounts and time lines.
If It is not clear come up with questions for still more clarifications.
Points are assured.
Thanks in Advance,
RK.

Who is defining the % discounts for periods/quaters?
Is this maintained in a custom table or externally in legacy/R3 system?
There are various ways to achieve the result. Variable exits can be used or virtual KF/char can be used but all depends on actual requirements.
Cheers

How to set restriction for user in sap

Hi,
I have created a user,now i need to restrict the user to work only for 8 hrs per day.HOw can i set timing for the user.Kindly help out regarding this.
Regards
sekar

Sekar,
If you use external authetnication for users when they logon to SAP, then you can control the times they can logon and which days of week (if required). For example, it is possible to use Active Directory authentication to authenticate users to SAP application via SNC or using a custom login module in WebAS Java, and in AD you can set times when logons are allowed. This might be what you are looking for ?
If you want to log somebody off SAP when they have been using it for a period of time, then this can be dangerous if they are in the middle of a complex transaction when they are logged off. Also, I don't think this functionality is included in SAP product. If you don't want somebody to use SAP at certain times of day, then it might be better to force a screen saver at workstation instead, if this is what you want.
Regards,
Tim

Bex query crash for user on sap portal

Similar Messages

Maybe you are looking for