Bex Query Designer and Bex Analyzer not working
Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad
Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya
Similar Messages
-
BEx QUERY DESIGNER AND QUERY ANALYZER
HI!!!
I want to learn to use the BEx Query Designer and the Query Analyzer, someone can help me with link, manuals, tutorials, cookbooks, everything about this?
Thanks and regardsHi,
Please check the links below which may help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25
https://www.sdn.sap.com/irj/sdn/bi-elearning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/27388d45-0c01-0010-9ebf-9b3dd7bd4ce6?prtmode=navigate
http://help.sap.com/saphelp_nw04s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92a25985-0a01-0010-5ea0-99ff9e0a244a
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d21c1f46076bb2e10000000a1553f6/frameset.htm
Regards,
® -
Problem with Queries Structures in Bex Query Designer and Universe Designer
Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
- (Characteristic Restrictions) Reg Guayana
> (InfoObject) 0Product = 'XXX'
> (InfoObject) 0Country = 'YYY'
- (Characteristic Restrictions) Reg Caracas
> (InfoObject) 0Product = 'AAA'
> (InfoObject) 0Country = 'BBB'
Rows
(Structure) ZSRT_456
(Key Figure) Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure) Net Sale
(Class) ZSRT_123
>(Dimension) ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier -
Different in viewing the query in query designer and bex analyzer in BW Prd
hello...i transported the query from bw dev into bw prod successfully. when i view the query using query designer in prod, the query is the same copy of query in bw dev and QA but when i view the same query under the bex analyzer in prod, the query is not the same.
the correct query should be able to see 3 mandatory variable input but when i view it under the bex analyzer, only 1 mandatory variable can be seen here. Whereas when i view it under query designer, i can see the 3 mandatory variable being define there. And this query is assigned in one of the role as well.
any idea on this? thanks!!!i checked in rsrt in sap, the personalization of the variable is not in yellow color, i can see the 3 variable in bex analyzer but the other 2 variable which is a mandatory field input for that query appear as optional variable input instead of the mandatory field input...
-
BEx Query Designer and Exceptions
I have a simple enough task. I was tasked, with marking items on a query with an exception, however the value is not static. I have a column marked hours, and five columns for each day of the week. The current day with data should yield an exception if the current day has less hours the the calculated hours column. So my first approach was to create a formula where I evaluate both the hours calculated from the query and the current day. I called this field fday1. I created an exception stating that if fday1 = 1 then to mark the field Bad3. but I want the affected structure to be the Actual Day such my column days are: Day 1 (current date), Day 2 (current date + 1) etc... but when I visit the query (ie, adhoc query) only the formula field fday1 has the exception day triggered. In the exceptions list I define the keyfigure fDay1 (time of evaluation [before list calculation]) Under the display tab I have exception affects data cells for the following structure elements: Day 1 (current date).
like If I execute this query through the portal the exception shows up correctly on the proper field. if I execute the query through the adhoc (BEx Ad Hoc Analysis) view, then the wrong field has the exception.
any thoughts on a better way to approach this query?Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help. -
Amp designer and pedal board not working in Logic Pro 8
Hello! I am new to LOGIC PRO 8 and maybe my silly question has a easy answer. When I want to record a guitar or a bass in the audio channel created for it, and want to insert for example a complete rig, the sound won't load and a message will apper saying "pedalboard not available" "amp designer not available" or pedal not available". If I open Mainstage 2 or Garage Band and I play, pedals are working and all amp modulation as well. If I go and look into the application support and plug-in settings folders it seems to me that everything is there. What am I missing or doing wrong? how can I solve the problem and make these enable for recording? THANK YOU FOR HELPING!
primocaster wrote:
"pedalboard not available" "amp designer not available" or pedal not available".
Hi
Amp Designer and Pedalboard plugs are in Logic 9 only...
CCT -
Download CS6 Design and Web Premium not working
Hi,
I have been given this link by Adobe after purchasing the Design and Web Premium. I have been able to download 2GB of the 4.5GB of the file 1 of 2 from this link in the English version for Windows.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Please help!
Elyshaagain, if you repeatedly lose connectivity make sure you're using a wired, not wireless connection or use a more stable wireless connection.
or you could use a download manager that allows you to continue downloads when they are interrupted. -
Future of BEx Query and BEx Query Designer
Folks, I understand SAP's future reporting tools is BO suite. All of us need to move to the new tools which are better or more reliable in 2010. Meanwhile our customers are reluctant to use BEx tools for any new development. Being on the techi side I dont see how BEx Query will be replaced by Voyager or Polestar or WebI or Crystal. I just need to report on my multiprovider without a universe layer. Have any of you experts come across documentation that layed out future of BEx tools explaining the end of support period? I have see roadmaps for tool availability but no dates for end of support.
Thanks in advance.AFAIK,
Bex Query designer and BEx query will continue... Polestar might be proposed as an alternative for BEx but then it is meant for ad-hoc analysis ... but BEx query and Query designer have specific query requirements also...
Voyager etc will start coming in... -
Group by in BEx query designer
Hello experts,
I'm new in BEx query designer and I'm currently working on displaying the maximum of a list of values and group them by calendar day like the exemple below:
CalendarDay
Client
Amount
02.09.2014
A
3000
02.09.2014
B
2000
03.09.2014
A
1500
03.09.2014
B
1600
The result I need to display is as below:
CalendarDay
Amount
02.09.2014
3000
02.09.2014
2000
OverAll result
3000
03.09.2014
1500
03.09.2014
1600
OverAll result
1600
What's the best solution for this ?! is it to work with calculated Key Figure or Exceptions ?! Would any one help me to get such result.
Thanks a lotIf you need to show the data as you mentioned then i think you are suppose to keep client in rows and also you have to switch on the result row display for that characteristic.
Because if you remove it then data will get aggregated based on calday and it will become 2 records only.
To get the maximum value you have to use Exception aggregation.Create a new formula and put the amount kf inside it.Hit the aggregation tab--Exception aggregation as maximum--Reference characteristic as client.
If this does not work then we can also apply nested aggregation based on calday.
Regards,
AL -
Bex Query Designer not using default browser
hello all, i have disabled my Internet Explorer from being my default browser, however, when i use the Bex query designer and test, it initiates my Internet Explorer, and not my default Safari browser.
does anyone know where this setting is made ?
thanks
gSkype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions -
New ratio doesn't appear in Bex Query designer
Hello Experts,
I added 2 ratios to my infocube. It activated without any problem. I then added these 2 ratios to my multiprovider and activated it after affecting them to the previous infocube.
Then I connected to the Bex query designer and loaded a report in order to add these ratios, but there are not available for selection in the Ratio menu of the multiprovider.
Has anyone faced this problem?
ThanksTry reactivating the Multiprovider again and see if that works !
I had this issue earlier, where I couldn't see two of the newly added characteristics in the multiprovider. But simply reactivating the multiprovider solved my issue.
- Danny -
In Bex Query designer - Flat is not supported
Hi all,
In Bex query designer,
While execution of the query, the following error is coming .
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Flat mode is not supported!
java.lang.UnsupportedOperationException: Flat mode is not supported!
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
Details: Full Exception Chain
Most important error.
regards
SelvanHello,
I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
Open, close, reload of the query does not help.
Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
The "flat-mode" seems to be the "BEx table mode".
SAP hints do not seem to fit here:
- 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
- 874825 SAPBWNews for BW 3.x Front-End Support Package 19
- 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
- 905229 update to SAPTableTree
- 909824 Termination in flat mode when an object is deleted (old?)
- 909827 Incorrect InfoProvider-dependent characteristic values
- 910602 Condition includes too many characteristics (usage of deleted elements)
- 915215 Termination when a query definition is changed (old? visibility of elements?)
- 968273 Cache with flat files: Exception is not caught (does not apply to given error)
Any new solutions?
Best regards
Thomas -
Dear Expert ,
i have installed sapgui 7.10 on windows 7 and also installed patch 16 for sap gui . sap gui working successfuly and connect to the server .when i open the bex analyzer and want to open any query , no system is shown whom i can connect it is blank and when i try to enter the username and password manaually it gives error .
Error Group
RFC_ERROR_PROGRAM
Message
Ent
<deleted by Moderator>
Edited by: Siegfried Szameitat on Jul 6, 2010 3:19 PMHi Faisal
Even I faced the same error while using SAPGUI 710 on Win7 with Excel 2007. You can try to get the latest Patches of the BEx 7.0 Addon and BEx 3.5 addon.
In case it still doesn't work, I tried this work around and it worked.
1. Login to the BW System using SAPGUI
2. Run the transaction RRMX and it will start BEx Analyser and you would be connected to the BW System (So no login reqd)
Please note that I didn't have problem with Query designer, only BEx Analyser was giving problem.
Also if you are able to solve the problem, please update the Process you achieved. There is problem in using BEx Analyser with Win7-Excel 2007/2010 for now. Let have a work around at least till the time SAP/MS Fixes this.
Regards
Abhishek -
Doubt on Rows and Coloums in BEx Query Designer.
Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ), and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharpyes i am Doing Offest.
I moved this Fiscal year Period to Free char, and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks. in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
Colums--> Forcast ( User Entered year ) Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks -
Cell definition in Query Design within Bex Analyzer
Hello,
I would like to use special cell definition to visualizing the difference row definition between 2 columns (last year and actual year). With "Cell Definition" function in Query Design within Bex Analyzer there's a option to select a new restricted key figure for a related cell. But as a result I just can see a star (*) against a result number in that field. Do you have an idea, how can I solve this problem?
Thanks and Regards,
NuranHi again Dirk,
there's not a unit problem. We use 2 different restricted key figure definition for a same row. The first restricted (or can be decribed as calculated key figure) key figure must be used in the first column to represent the value of the last year. And at the same row with usage of same text (for example: cost of goods sold)the second restricted key figure should be used to show the value of actual year (B2:costs in euro). The problem is the key figure definitions are totaly different; they're using different account groups etc. Cause of, I wanted to use cell definition function. In the first value field (B1) should be shown first key figure but I just get star (*) and a wrong value in the formula field of excel (between the toolbars and the result area).
Thanks for your reply.
Nuran
Maybe you are looking for
-
How do I unhide multiple columns at a time in a response table?
I feel like I have done this before, but now I cannot seem to figure out how. Any help would be appreciated.
-
When i try to open a .swf file, it goes to adobe device central as default
when i try to open a .swf file, it goes to adobe device central as default. i can't seem to open it in adobe flash????
-
CRM(TPM): Promotion status to released -- update to which R/3 table?
Hello experts, we have a CRM (with TPM) 5.2 and a connected R/3 (4.6c). The saved promotion (CRM) triggers an entering of a rebate agreement on R/3 side. If I set the promotion status to "released", where can I see this on R/3 side?? Entry in which D
-
Header Variant on Line Item Reports
Can someone tell me how to transport header variants that I have created for FBL5N. I have gone into the report, then chosen Settings -> Layout -> Current Header Rows and defined the header layout. However, I cannot find a way of placing this definit
-
How to add linked button in grid?
Hi, Does anyone know how to add linked button in a grid? I can't find it but i saw someone ask similar question but seems none of them works. Thanks a lot! P.S. For some reason, i can't use matrix because the data is from a SQL query. Lan