BEx QUERY DESIGNER AND QUERY ANALYZER

HI!!!
I want to learn to use the BEx Query Designer and the Query Analyzer, someone can help me with link, manuals, tutorials, cookbooks, everything about this?
Thanks and regards

Hi,
Please check the links below which may help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25
https://www.sdn.sap.com/irj/sdn/bi-elearning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/27388d45-0c01-0010-9ebf-9b3dd7bd4ce6?prtmode=navigate
http://help.sap.com/saphelp_nw04s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92a25985-0a01-0010-5ea0-99ff9e0a244a
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d21c1f46076bb2e10000000a1553f6/frameset.htm
Regards,
®

Similar Messages

Infoareas do not at Query Designer and Analyzer

Dear frieds,
We are do not see the infoareas at Query designer and analyzer ( BW Quality ), in DEV is all right, what's happening ?
OBS: The user autority is equal in all clients.
Thanks.
Fabrício

Hi,
Are you not able to see any of the info areas or only some specific infoareas?
Regards
Akhan

Report Designer and Query Designer in BI 7.0

Hi friends,
      what is the use of Report Designer and Query Designer.. and what is the difference between these two..
    I know about Analyser... that is used for designing a query and we can analyse (or) see the result of that query in that window....
     then what is the use of Query Designer... can you give me the brief introduction abt that... if any documents plz farword to me..
my mail id--- [email protected]
thanks
@jay

Hi Ajay,
Report Designer is a newly added feature in BI 7. This helps to do cosmetic changes to the report, change the fonts, add colors etc. Please check this link for more info on Report designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Query Designer, is where you develop, edit your queries.
Analyzer, is where you execute the query and analyze the results.
Hope this helps.

Difference Beetween Query Designer and Adhoc Query Designer

Hello!
can any one explain me what exactly is Adhoc query designer and how is it different from Bex Query designer. can you please provide me links for Adhoc query designer (not to Bex query designer)
with regards
ashwin

Hi Ashwin,
See this link:
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
Basically the Adhoc query designer is a web item that you can include in a web template to allow the user to create or change queries in the web environment. It has some limitations like you cannot use variables, and can only use one structure.
Hope this helps...

Query generator and query wizard

with the help of query generator and query wizard, we create queries.
one of the application of generating query is that we can use it in formated search.
can plz anyone tell me what are the other possible application of queries created by guery generator and query wizard.
I am peruing training of SAP B1, so if any mistake is done from my side, I am sorry for that.
Thanks in advance.
Punam

Hi Punam.......
Query Generator is purely used for reporting as it uses SQL which is a strong tool of reporting. Moreover you can use the query generator for Formatted Searches as well as its SQL queries may useful in creating SP Transactions Notifications, Stored Procedures, Functions, Triggers etc.....
For More details you can check this link.....
http://www.youtube.com/watch?v=-LriSLVv5VA
http://www.sbonotes.com/content/creating-custom-queries-sap-business-one
Regards,
Rahul

BEx Variable defined in BI 7.0 Query Designer and using in BW 3.5 Analyzer

Hi,
I have defined a variable in BI 7.0 Query designer for a characteristic which is present in characteristic restrictions area to restrict it . Ideally when that query is executed a pop up box should be opened to enter a value of the variable. But when that query is opened in BW 3.5 BEx Analyzer, instead of pop up box the error message " Error specify a value for the Variable ' Variable Name ' " has been displayed. Please help me to resolve this problem
<i><b>Details of Variable:</b></i>
Type: Characteristic Value
Processed by: Manual Entry/Default Value
Variable is : Mandatory
and Ready for input
No default values are defined for this variable.
Thanks
Hari Prasad.

Hi,
Once a query opened and changed in the BI7.0 query designer u can not use the same query in lower version.
Thats the reason the error message coming.
If u need the 3.5 query just keep as it is , and copy the same query in different name and open it in the BI7.0 and do the changes.
Thanks,
Debasish

Different in viewing the query in query designer and bex analyzer in BW Prd

hello...i transported the query from bw dev into bw prod successfully. when i view the query using query designer in prod, the query is the same copy of query in bw dev and QA but when i view the same query under the bex analyzer in prod, the query is not the same.
the correct query should be able to see 3 mandatory variable input but when i view it under the bex analyzer, only 1 mandatory variable can be seen here. Whereas when i view it under query designer, i can see the 3 mandatory variable being define there. And this query is assigned in one of the role as well.
any idea on this? thanks!!!

i checked in rsrt in sap, the personalization of the variable is not in yellow color, i can see the 3 variable in bex analyzer but the other 2 variable which is a mandatory field input for that query appear as optional variable input instead of the mandatory field input...

Bex Query Designer and Bex Analyzer not working

Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad

Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

BEx Query Designer and Exceptions

I have a simple enough task. I was tasked, with marking items on a query with an exception, however the value is not static. I have a column marked hours, and five columns for each day of the week. The current day with data should yield an exception if the current day has less hours the the calculated hours column. So my first approach was to create a formula where I evaluate both the hours calculated from the query and the current day. I called this field fday1. I created an exception stating that if fday1 = 1 then to mark the field Bad3. but I want the affected structure to be the Actual Day such my column days are: Day 1 (current date), Day 2 (current date + 1) etc... but when I visit the query (ie, adhoc query) only the formula field fday1 has the exception day triggered. In the exceptions list I define the keyfigure fDay1 (time of evaluation [before list calculation]) Under the display tab I have exception affects data cells for the following structure elements: Day 1 (current date).
like If I execute this query through the portal the exception shows up correctly on the proper field. if I execute the query through the adhoc (BEx Ad Hoc Analysis) view, then the wrong field has the exception.
any thoughts on a better way to approach this query?

Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help.

Please help on how Bex execute the query designed in query designer.

Hi All,
Want to know how bex execute/interpret the query when the query is execute in analyzer.
I mean which part of the query is executed first, like filter,RKF or CKF etc.
Want to do step by step analysis .Please suggest on this.
Thanks & Regards
Sameer Khan

HI,
When u execute the query...It will fetch the Global filters data first ....means filters on Default values....then restrictions on Char Restriction pannnel....Then calculate the RKF and CKF,s....Conditions and Exeptions etc.......
Thanks

Error while executing query in query designer and RSRT.

Hello All,
At none of the places (BI--> RSRT or via query designer GUI) my query is executing properly .
At RSRT the error message ---
At Bex Query designer the error msg--
Checked the data at the sales-infocube level , the data is absolutely ok.
Regards
Deblina

Hi,
Have checked both the places, backend cube as well as the filter conditions of the query ,everything is in sync.
to make the query more simple i have removed the charateristics restrictions then ran the query , but still getting the same error.
Am just attaching the screenshot of the query layout, for your reference.
Regarding connectivity to access the portal, how it can be established.
Many Thanks
Regards
Deblina.

Query designer and Standard deviation result rows

Hello everyone,
Here is my problem.
I have a key figure for which I do not want any decimals. So in the Number Format : Number of Decimal Places = 0.
I thought the result rows would follow the same rules by not displaying any decimals.
But using the Calculate Result as ... "Standard Deviation", even though my key figure is define with no decimals, the result row displays 5 decimals anyway !
Why? and is there any way I can suppress the decimals of my results rows with a Standard Deviation
Thx
JBF
Edited by: Jean-Baptiste Faubert on Jan 16, 2008 2:56 PM

Hello Jean,
First I would try to unmark flag 'Use default Settings' below Number of Decimal Places in Query Designer.
If this doesn't help you could set Decimal Places in the Provider specific Properties in Key Figure of the MultiProvider used from 'Not defined' to 0.
Also you could change the number of decimals in InfoObject maintainance of used Key Figure (in RSA1).
But then you have to check other queries where this Key Figure is used.
Kind regards
Klaus

Portal Port to Publish in Portal via Query Designer and Web Application

Hello Gurus,
Recently we change the port from 50000 to 80 to do federated portal connection more transparent.
After this change I open for example the web application designer and open a web template and try to execute it.
This action pop up the web browser to show the web template, but there is a problem, the web application designer still openning the web template with the 50000 port.
The question is:
Where I change the port used for BEx Web Applications to execute the web templates or the BEx Web querys?
thansk for your help.
Jose

Solve with SAP Note: 947148

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

BEx QUERY DESIGNER AND QUERY ANALYZER

Similar Messages

Maybe you are looking for