BEx Query designer : Execution and portal

Hi Experts,
When i execute the query the respective portal is not opening up. Kindly advise me If I am missing some setting.
thanks & regards,
M.S

Hi Michael,
The SAP Notes you are provided are very good. We are getting the URL link but I can not see the results in Internet explorer.
I am getting error the SAP Server can not be reached.
All though all settings are maintained in system, maintained server parameters in Sytstem32/hosts file, added the URL as trusted site & I am on IE 6. But nothing is working I can not see the results even the URL is generating. This is only problem with Development system, we are getting results for quality and prod system.
Please let me know if you have any idea.
Thanks!
Harshal

Similar Messages

  • Bex Query designer withour Enterprise Portal?

    Dear BW experts,
    After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
    It is launching the following URL
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
    I think it is looking for Enteprise Portal server. I dont have an EP server.
    What is the alternate way to execute this?
    Thanks in Advance...

    Hello to all of you,
    just to make sure that I do not missunderstand:
    As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
    Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
    As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
    Uwe

  • Message in BEx Query Designer Formula

    Hi Experts,
    I need to display message based on the value of the formula result. For Example:
    If K.F1 =<2.5 Then <Message: ODD>
    ElseIF K.F1 >2.5 Then <Message: Even>
    Else
    <Message: Determine the value>
    EndIF
    Thease above messages would be build in the formula column of BEx query designer
    Thanks and really appreciate your response.
    Regards,
    Waseem

    Hello,
    I have done the same funtionality with the help of workbook.
    May be experts can guide us how to display  messages in the formula column of BEx query designer.
    Thanks.
    With regards,
    Anand Kumar

  • BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

    Hi ALL,
    Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
    However, when IE pops up to show the result, it says 'The page cannot be displayed'.
    It seems the PORT Number is wrong.
    When I execute the RSPLAN the port number is 52300 (23 ASCS)  (and it works!!).
    For this web query the port in URL is 55300 (53 SCS).
    Could you help to configure the right port?
    Something needs to be done on Basis side configurations?
    Thank you,
    Nivia

    Hi,
    This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
    But I still have problem:
    The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
    Connect_PM  TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
    ERROR       partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
    I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
    The important detail is that The PORTAL works if it doesn't come from BEx.
    COULD SOMEONE HELP ME?
    Tks,
    Nivia

  • BEx QUERY DESIGNER AND QUERY ANALYZER

    HI!!!
    I want to learn to use the BEx Query Designer and the Query Analyzer, someone can help me with link, manuals, tutorials, cookbooks, everything about this?
    Thanks and regards

    Hi,
    Please check the links below which may help you.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25
    https://www.sdn.sap.com/irj/sdn/bi-elearning
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/27388d45-0c01-0010-9ebf-9b3dd7bd4ce6?prtmode=navigate
    http://help.sap.com/saphelp_nw04s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92a25985-0a01-0010-5ea0-99ff9e0a244a
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/d21c1f46076bb2e10000000a1553f6/frameset.htm
    Regards,
    ®

  • Settings for SAP Portal start page from BEx Query Designer

    Hi!
    In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
    When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
    I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
    Question:
    What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
    Thank you very much!
    regards
    Jürgen

    Hi Anton?
    Many thanks for your reply.
    But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
    Do you speak Russian? Me too
    Can you also help me with the following problem?
    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
    - the status is getting u201Cyellowu201D (194 from 0 records)
    - at the next day the status is getting u201Credu201D and I received the following error:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Comment:
    I did not find any entries on "Environment -> Transact. RFC -> In source system"
    The Source system connection EC6CLNT100 is OK
    Can some one help me to solve this problem?
    Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

  • IF and ABS condition statement in BEX query designer

    Hi,
    I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
    The condition statement that I have on my Excel file is
    =IF((A2-B2)>0,ABS(A2-B2),0)
    I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
    Anyone who could help me with my issue?
    Thanks,
    Arnold

    Hi Arnold,
    Thank you,
    Nanda

  • Results based on From and To value in Bex query designer.

    Dear all,
    We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
    I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
    Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
    I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
    To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
    How to get my requirement achieved in the Bex query designer.
    Experts suggestion with steps will be very useful to solve my problem.
    Regards,
    M.M
    Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

    Hi Magesh,
    I think you could try one more way.
    Create a formula inserting your two formula variables for limits .(FV -  are ready for input ) .
    The formula would return the result as 1 or 0 because it would have boolean condition in it.
    You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
    You formula A would look like
    ( KF > FV1) AND (KF < FV2) * 1.
    And in the condition put A EQ 1.
    You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
    Regards,
    Sunmit.

  • Difference between  aggregation and calculation tab in BEx Query Designer

    HI,
    I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in  the properties tab i found aggregation tab and calculation tab.
    I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
    I not able to used that Aggregation tab it is showing as a hidden fields...
    can any one tell me whats the exact difference between these tabs and when we need to use which tab?
    With Regards,
    Thanesh Kumar.

    Hi Thanesh Kumar,
    I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
    I could explain to you the difference between these two tabs.
    For "calculation" tab, it changes the display of result and does not change the calculation logic.
    It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting)  is used for further formula calculation.
    For "aggregation" tab, it changes the real calculation logic.
    The system takes the setting as the aggregation rule for records.
    The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
    Average instead of summation when aggregating records. And the Average value will be taken for calculation
    in further formulas or other calculations.
    For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
    a basic key figure. That should be the reason why you see it greyed-out.
    Regards,
    Patricia

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • Doubt on Rows and Coloums in BEx Query Designer.

    Hello, Experts.
    I have a Doubt in BEx Query Designer.
    In the Rows I have a Fiscal year Period,  if the user enters the Fiscal year period for e.g. : 001/2006  .  
    in the columns i have  forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ). 
    My Questions is ,  as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
    Thanks in Advance .
    Sharp

    yes i am  Doing Offest.
    I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period .  it worked.  but
    when i kept this in Rows and deleted Previous Fiscal Year period .  it is displaying blanks.   in prior years forecast.
    is it because i am Ristricting it to only fical year period  which user entered
             Colums-->  Forcast ( User Entered year )          Prior year
    Rows
    Fiscal year period
      Fiscal year period( user enterd )
    Thanks

  • Execution of BEx Query Designer Querys in BI Java SDK

    Hello experts,
    i am actually occupying with the possibilities of the BI Java SDK. I checked the documentation but could not find an answer to my question, so i address this issue now to the community in the hope, that someone out there can give me a hint:
    Is it possible to execute a BI query, which was designed in the BEx query designer, within the BI Java SDK OLAP query api?
    Is  there somewhere a method, which could be simply passed the technical names of the infocube and  the query and then returns the query result as a IBIResultSet or IBIDataSet?
    Thanks in advance for your help,
    best regards,
    Thilo

    Hello Mohan,
    thanks for this impression - thats a way i didn't think about at all before. I even think, that it is not necessary to publish the query as iview - it would suffice to invoke the BEx-AdHoc-Analysis Service via a HttpConnection-Object within a servlet and then parse the result delivered by the BEx service. You won't even need BI Java SDK for this, since this is plain Java functionality.
    But as i see there seems to exist no BI Java SDK-"generic" possibility to invoke an existing query as i see....
    If anybody has got another idea, it is very welcome. But i think i will investigate on the approach with the native HTTP call to AdHoc Service.
    Thanks anyway & best regards,
    Thilo

  • Future of BEx Query and BEx Query Designer

    Folks, I understand SAP's future reporting tools is BO suite. All of us need to move to the new tools which are better or more reliable in 2010. Meanwhile our customers are reluctant to use BEx tools for any new development. Being on the techi side I dont see how BEx Query will be replaced by Voyager or Polestar or WebI or Crystal. I just need to report on my multiprovider without a universe layer. Have any of you experts come across documentation that layed out future of BEx tools explaining the end of support period? I have see roadmaps for tool availability but no dates for end of support.
    Thanks in advance.

    AFAIK,
    Bex Query designer and BEx query will continue... Polestar might be proposed as an alternative for BEx but then it is meant for ad-hoc analysis ... but BEx query and Query designer have specific query requirements also...
    Voyager etc will start coming in...

  • Bex Query Designer and Bex Analyzer not working

    Hi All,
    While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
    While Login to Bex Query Designer, It is giving an error "Login Aborted".
    Please help me to resolve this issue
    Thanks
    Irshad

    Hello Irshad
    Not sure if it helps but can try suggestion mentioned in this note.
    https://service.sap.com/sap/support/notes/1434630
    If problem persists you can upgrade your SAP GUI Patch level.
    Still facing problem, please contact SAP .
    Regards
    Anindya

  • In Bex Query designer - Flat is not supported

    Hi all,
    In Bex query designer,
    While execution of the query, the following error is coming .
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    Flat mode is not supported!
    java.lang.UnsupportedOperationException: Flat mode is not supported!
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
    Details: Full Exception Chain
    Most important error.
    regards
    Selvan

    Hello,
    I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
    Open, close, reload of the query does not help.
    Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
    Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
    Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
    I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
    The "flat-mode" seems to be the  "BEx table mode".
    SAP hints do not seem to fit here:
    - 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
    - 874825 SAPBWNews for BW 3.x Front-End Support Package 19
    - 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
    - 905229 update to SAPTableTree
    - 909824 Termination in flat mode when an object is deleted (old?)
    - 909827 Incorrect InfoProvider-dependent characteristic values
    - 910602 Condition includes too many characteristics (usage of deleted elements)
    - 915215 Termination when a query definition is changed (old? visibility of elements?)
    - 968273 Cache with flat files: Exception is not caught (does not apply to given error)
    Any new solutions?
    Best regards
    Thomas

Maybe you are looking for