BEx Query Designer problem when generate URL to IE

Hello everyone,
When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
And IE display that "The address is not valid".
I think the reason is that there are some configuration not do.
Could any guys tell me what configuration should be done ?
Thank you!
BR,
Louis

Hi,
I think the Bex service is not confirgured correctly in your system.
For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
Refer to the hot to document on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
Regards,Shilpa

Similar Messages

BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

Unable to run query from BEx query designer

Hello,
I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
but query result isnt shown.
Internet Explorer cannot display the webpage.
What kind of setting do I need to change to get query working?
thanks

Hi Comandante,
If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX or RSRT transaction for now until the issue with the query designer is solved ..
Hope it helps!
Regards,
Pavan

BEx Query Designer Opening Problem

Hi Guys,
I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
Component 'BEx Query Designer': available version 154, version 229 required.
Before you can continue you have to run the front-end setup.
please let me know to resolve this issue.
Thanks
Murali

Hi Murali,
To make sure it works, you should make sure that:
When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
Install the latest front end patch (BI patch 7) from SAP Marketplace
I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
It works pretty well for us, I am sure you will also eventually make it work
hope this solves ur problem....
Regards,
Bala...

Problem Bex Query Designer

Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.

have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi

Cannot see BEx Query in user role profile in BEx query designer

I assigned several BEx query objects into user profile menu via t-code PFCG first.
Then expected - when I need and open them in BEx query designer I could find them after clicking "Role" button in "Open" window. But unfortuantely I'm not able to do that.
Do I miss anything to archive that? Is other customizing activity else neccessary?
Thank you for any suggestion.

Hi Brad.Ma,
If you can open query from Area "button", after that, you publish it to roles you want assign.
You try generate Authoriation in Role in Tcode PFCG.
Hope help you to solve the problem.
Dao
Edited by: xuandao_sap on Sep 20, 2011 3:33 AM

BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
Nivia

Hi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia

Division in bex query designer

Hi experts,
I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
I have tried the following in Bex query designer
-25124 %A -91248 = -0,02753%
(-25124/-91248)*100 = 0,02753
What might be the problem here?

Thanks again for your answer,
I will try to explain my report (requirement from the business user)
Actual (KF)----
Budget (KF)
Sales-- -91248--
-77153
FSP-- -25124--
-18918
Margin % -
(FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
Dim
Dim
Result
The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

In Bex Query designer - Flat is not supported

Hi all,
In Bex query designer,
While execution of the query, the following error is coming .
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Flat mode is not supported!
java.lang.UnsupportedOperationException: Flat mode is not supported!
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
Details: Full Exception Chain
Most important error.
regards
Selvan

Hello,
I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
Open, close, reload of the query does not help.
Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
The "flat-mode" seems to be the "BEx table mode".
SAP hints do not seem to fit here:
- 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
- 874825 SAPBWNews for BW 3.x Front-End Support Package 19
- 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
- 905229 update to SAPTableTree
- 909824 Termination in flat mode when an object is deleted (old?)
- 909827 Incorrect InfoProvider-dependent characteristic values
- 910602 Condition includes too many characteristics (usage of deleted elements)
- 915215 Termination when a query definition is changed (old? visibility of elements?)
- 968273 Cache with flat files: Exception is not caught (does not apply to given error)
Any new solutions?
Best regards
Thomas

Bex query designer -- Execute Error

Hello,
when i am executing the Bex query designer -- > Execute. i am getting the following error.
Service not attainable
What has happened?
The call of the URL http: // fe-pit-ttbw.company.com:8000 / irj/servlet/prt/portal/prtroot/pcd! 3aportal_content! 2fcom.sap.pct! 2fplatform_add_ons! 2fcom.sap.ip.bi! 2fiViews! 2fcom.sap.ip.bi.bex it was broken off, because the appropriate service is not available.
Indication
The demolition appeared on the system PIT and with the fault code 404 and the reason trouble(need) found. The selected virtual Host was 0.
What can you do?
Please, choose a valid URL. If you still dispose of no user's identification, you address your system administrator.
Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:rb3pnk2_PIT_00-v:0-s:404-r:Notfound HTTP 404 - trouble(need) found your Internet SAP Communication Framework team
Edited by: Ranga123 on Aug 5, 2010 1:14 PM

hi
have u checked if web service is active to open the report in web?
use T-Code SICF
also check if portal is up or not.
also check below post:
[SICF service - error code 404;
Edited by: Gaurav on Aug 5, 2010 2:01 PM

BEx Query Designer Error

Hi All,
I have a problem where I have just updated to SP 18 and now the BEx Query Designer comes up with a problem, I can open the Query Desinger but when I go to open a query from my history the Query Designer shuts down immediatly.
Has anybody got any Ideas?
The SAP Gui and Business Explorer is 710.
Thanks for your help
Jay

Hi Pra,
I do not get an error message the Query Designer just shuts down.
Are there any log files I can look into to check for error messages?
Thanks
Jay

Query designer problem with SAP GUI 7.10

I recently installed the SAP GUI 7.10 and when I'm going to apply or remove a filter in any characteristic, this error is shown :
<b>----
BEx Query Designer
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
OK
</b>
Anybody knows what to do?
Tnks in advance.

I had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob

BEx Query Designer problem when generate URL to IE

Similar Messages

Maybe you are looking for