Bex query- Dynamic selection of next 4 periods according to Month drilldown

Dear All.
I am working in BI 7.0.
I want to do a report which shows Begining inventories and Forecast. The report will be drill down by Year/month which filters Begining inventory. For Forecast, I would liek to see 5 months of forecast in 5 different colums, starting from the month of begining inventory.
As an example:
Month     FORECAST1 FORECAST2 FORECAST3 FORECAST4 FORECAST5
01.2009     01.2009     02.2009     03.2009     04.2009     05.2009
02.2009     02.2009     03.2009     04.2009     05.2009     06.2009
03.2009     03.2009     04.2009     05.2009     06.2009     07.2009
04.2009     04.2009     05.2009     06.2009     07.2009     08.2009
The colums month is the drill down of Year/Month characterisitic. The values on forecast represent the selection of period for each column for the forecast data.
How could I build this? Is there any way to do this?
Thanks a lot and best regards,
Alfonso.

This report is similar to YTD report I hope. But this will have to be done the hard way only. Why not consider like this..
Your Existing Query O/p:
>Month FORECAST1 FORECAST2 FORECAST3 FORECAST4 FORECAST5
>01.2009 01.2009 02.2009 03.2009 04.2009 05.2009
>02.2009 02.2009 03.2009 04.2009 05.2009 06.2009
>03.2009 03.2009 04.2009 05.2009 06.2009 07.2009
>04.2009 04.2009 05.2009 06.2009 07.2009 08.2009
Trial Solution 1 : Considering you enter a particular Month-Year (say Jan 2009), you'll get the data like this, best way is to think in SWAP Axis approach. Helps when most reports looks terribly difficult to move on. Considering you create a 0CALMONTH varibale X, then you need to add X1, X2 and so on.
O/p:
>MonthForcst | 01.2009 | 02.2009 | 03.2009 | 04.2009 *** This can be done by using VARIABLES. Create 0CALMONTH Variables
>FORECAST1 | 01.2009 | 02.2009 | 03.2009 | 04.2009 |
>FORECAST2 | 02.2009 | 03.2009 | 04.2009 | 05.2009 |
>FORECAST3 | 03.2009 | 04.2009 | 05.2009 | 06.2009 |
>FORECAST4 | 04.2009 | 05.2009 | 06.2009 | 07.2009 |
>FORECAST5 | 05.2009 | 06.2009 | 07.2009 | 08.2009|
Trial Solution 2 : User Customer Exits. Design a exit which will populate each Month's data (Note: Here data is aggregated on basis of Month you have assigned). For particular HEADING (i.e. 'MonthForcst' you need, plan your variables by using multiple inputs for which all month you need.) If you need any help in Customer Exit for this kind of solution, I'll attach a sample code as here on request. This is the best way, as you can always transfer data through the exit.
Example. If you want to select Apr`09, as month selection will vary through the year - You need to get the values for selected period to end of year. Then, design it so that choosing Apr`09, system will gather data for 2009 & based on availiablity of data it must populate the MONTHS/Forecast directly.

Similar Messages

Passing variables to a BEx query dynamically

Hi All,
We have a requirement to pass values for variables dynamically to a Bex 7x query because we do not want to prompt any variable screen to the user. I tried few steps as suggested in SAPBEXsetVariables range but still have some questions unanswered. So request your thoughts on the same.
Below procedure has been followed.
1. Open Bex Analyzer
2. Navigate to Bex Analyzer (menu) -> Design Toolbar -> Insert Button. This will switch on the Design Mode.
3. Click on the button, select "Workbook-Specific Command" and click on next (Data provider need not be worried about at this point as it can be changed later also).
4. Select "Process Variables" and click on Finish.
5. One more window with an heading "Properties of Button" will be shown with fields like "Name of Button", "Range", "Button Text", "Command Range" and few other.
6. On the right side of this window, list of Static Parameters can be created.
7. As an example, i created below parameters
CMD                         0          PROCESS_VARIABLES
DATA_PROVIDER      0          DP_1
and created a range having below details and provided this range in "Command Range" field (in button properties)
VAR_NAME                     0         #NAME1#
VAR_VALUE_EXT            0          #VALUE#
VAR_NAME_1                 0          #NAME2#
VAR_VALUE_EXT_1         0          #VALUE2#
8. This DID NOT WORK for me. Actually nothing was happening when the button was pressed.
After some investigation, i figured out that i need to have one command like below
CMD
          1
SHOW_VARIABLE_SCREEN
Without this neither the variable screen was shown nor it read the parameter values from the excel range provided.
Once this was done, the input screen was shown and with the values that i provided in my excel range.
Here are my questions. Pls provide your valuable inputs.
1. Why am i forced to have a command for "SHOW_VARIABLE_SCREEN"? Is this mandatory? problem with this is that user will always be shown a input screen which we don't want (in fact the very reason for this exercise is not to show the parameter screen but to supply values to it from the back end). Is there some setting that i need to do to get rid of this?
2. The setup can read values for only 2 parameters. i mean when there is an additional variable, the program is not reading the 3rd parameter values (of course i updated the "command range").
VAR_NAME                     0         #NAME1#
VAR_VALUE_EXT            0          #VALUE#
VAR_NAME_1                 0          #NAME2#
VAR_VALUE_EXT_1         0          #VALUE2#
VAR_NAME_2                 0          #NAME3#
VAR_VALUE_EXT_2         0          #VALUE3#
Thank you. Looking for a sooner response.
Lohith

Hi All,
I figured out the mistake that i have done. Looks like the order of the commands is very important.
In my case, i had something like below
CMD                         0          PROCESS_VARIABLES
DATA_PROVIDER      0          DP_1
SUBCMD                   0          VAR_SUBMIT
I should not have the PROCESS_VARIABLES as my first command. Instead should have DP_1 or the SUBCMD as first argument. So below order worked for me.
DATA_PROVIDER      0          DP_1
SUBCMD                   0          VAR_SUBMIT
CMD                         0          PROCESS_VARIABLES
So, i don't need to have "SHOW_VARIABLE_SCREEN" command as i don't want to show the screen.
But my second question is still unanswered. Can you through some light on it?
2. The setup can read values for only 2 parameters. i mean when there is an additional variable, the program is not reading the 3rd parameter values (of course i updated the "command range").
VAR_NAME                     0         #NAME1#
VAR_VALUE_EXT            0          #VALUE#
VAR_NAME_1                 0          #NAME2#
VAR_VALUE_EXT_1         0          #VALUE2#
VAR_NAME_2                 0          #NAME3#
VAR_VALUE_EXT_2         0          #VALUE3#
Lohith

BEX Query: by selection of actual month/year also shows month/year-1

Hi
When I set the selection value 11.2010 or also 11/2010, as result of the Query I get the values for 11.2010 but I also receive 11.2009.
This also when I use the selection with 11/2010, I get also 11/2009 too.
Can someone tell me how I can set the query, that it will stick with my values and not add the previous year?
Thank you very much for your help.
Petra

Check whether the variable created for month year is a customer exit Variable.
In a customer exit variable the code can be written such as to bring the data from current year current month to the last year current month.

Bex query. Select single values in variable time out.

I have created a variable on characteristic 0profit_ctr which works fine for all queries on all Infoproviders except for one. With this particular Infoprovider, which is a DSO when the option to show u201CSingle Valuesu201D is selected in the variable screen the query just hangs and eventually time-outs. I have tried including the DSO in a mult-provider but still have the same issue. The variable works on other DSOu2019s with exactly the same settings. This DSO has less data than the other DSOu2019s which work fine.
I know that 0profit_ctr is compounded with 0co_area which I have tried restricting with no change in the result.
I would be grateful of any ideas.
Thanks
Jenny

Hi Durgesh.
I checked the settings and although they were the same as other infoproviders I changed the query filter value to use the values in the master data table and this has solved my problem.
Thanks for your tip.
Regards
Jenny

Need to run a query to select # of counts based on each month

Let's say I have a talble with 12 months, each month has some data.
I want to run a select count(*) to get result of how many rows per month, like Jan----100, Feb---90, etc.
How do I do that?
Thanks in advance.

user569151 wrote:
Let's say I have a talble with 12 months, each month has some data.
I want to run a select count(*) to get result of how many rows per month, like Jan----100, Feb---90, etc.
How do I do that?
Thanks in advance.May be like this:
SELECT EXTRACT(MONTH FROM date_column),COUNT(*)
FROM TABLE_NAME
GROUP BY EXTRACT(MONTH FROM date_column);

Bex Query which uses Dynamic columns to display actuals

Hi Bex experts,
I have a query issue/question.
I currently have a Bex query which shows me the the planned values for each period, spanning 6 years into the future. My Key figure columns are defined as follows:
Value type = '020'
Version = mandatory variable, entered at execution.
Posting period (FISCPER3) = These columns are fixed values using periods 1 to 12 for each column.
Fiscal year (0FISCYEAR) = Each column contains SAP exit for current year, and using the offset +1, +2, +3, +4 etc, when I define the future years coulmns.
Currency = fixed 'USD'.
Fiscal year variant = fixed 'Z4'
The above works fine for plan data.
I want to now include is:
Seperate 'Dynamic columns' to show only actuals for period ranges from period one to the previous period (or current period minus 1). Each period should have it's own column for actuals.
The dynamic actuals columns should be grouped together to the left of the plan columns.
Actuals are only for current year, so I will still use the SAP EXIT for current year in the column definition.
Example: If I am currently in period 10, the query should show me actuals from period 1 to period 9 in seperate columns, then continue to show me my plan values columns that I have in place already.
How can I construct these actuals columns in to my existing query. If you have possible screens shots.
Thanks, and maximum points will be alotted.

The way I have approached this you may not like as it involves quite a bit of coding
12 CKFs
each CKF adds up 2 RKFs
So 24 RKFs
example Column 6 CKF
Adds Column 6 RKF Actual and Column 6 RKF Plan
Column 6 RKF Actual contains Actual version + key figure + Period variable column 6 Actual
Column 6 RKF Plan contains Plan version + key figure + Period Variable column 6 Plan
Period variable column 6 Actual
is a cmod variable which reads the entered date
if the period of entered date is LE 6
then return period 6 into "Period variable column 6 Actual"
else put 0 into "Period variable column 6 Actual"
Period variable column 6 Plan
is a cmod variable which reads the entered date
if the period of entered date is LE 6
then return period 0 into "Period variable column 6 Plan"
else put 6 into "Period variable column 6 Plan"
Now what happens is that if you enter period 6 in your selection screen all the Actuals of columns greater than 6 all have period 0 put into their selection so return 0 and all the columns less than or equal to 6 return the values for the fiscal period (ie column 1 gets period 1)
And in addition all the Plans columns return the value of their column ie for their period for those greater than 6 and for those less than 6 they all return 0
It's convulted - but you get the idea - and yes it works
There may be a better way to do it - and I am open to suggestions
(this does assume that NOTHING is posted to period 0 otherwise it won't work)

Dynamic selection in query structure

Hi everyone,
I wonder if it is possible to create dynamic selections in a query structure. Here is my scenario:
In the columns section of my query I have a structure with all months of a year. Depending on the time of the year, all past months shall contain "actuals" whilst the upcoming months contain "forecast" data. (As far as I know) Using variables, I should be able to fill and name each month dynamically using variables. If it's March now, I would have the following resulting structure:
- "Jan - Actual" (containing actuals)
- "Feb - Actual" (containing actuals)
- "Mar - Forecast" (containing forecast)
- "Apr - Forecast" (containing forecast)
Each month is represented by a selection (if I understand correctly).
Is it possible, to show or hide such a selection dynamically? The reason I ask: for the current period (March) I also want to display the "current" value (besides the forecast). Unfortunately, this selection moves a long the structure as time moves on: this month, the "current" shall be placed right before "Mar - Forecast".
- "Jan - Actual" (containing actuals)
- "Feb - Actual" (containing actuals)
- "Mar - Current" (containing currents)
- "Mar - Forecast" (containing forecast)
- "Apr - Forecast" (containing forecast)
Next month it shall be right before "Apr - Forecast".
- "Jan - Actual" (containing actuals)
- "Feb - Actual" (containing actuals)
- "Mar - Forecast" (containing forecast)
- "Apr - Current" (containing currents)
- "Apr - Forecast" (containing forecast)
Is this possible with BW 3.5? Or otherwise with BI 7? Or is this requirement too dynamic?
Thanks in advance, Dan

Hi,
as already mentionned you can do that with the help of variables.
For the "moving" column one solution would be to systematically create the column for each month and restrict it to the current month. Only one of this column will get a result different than 0. Then you enable the zero suppresion at query level and allow as well the suppression of the element of your structure (will will hide all the non current columns). This solution is not so elegant but would work.
Othewise it shoul be also possible to make it with a complex variables implementation (ABAP etc...); in thery that should be possible, the question is it worth the time to develop it so sophisticated??
hope this helps...
Olivier.
Edited by: Olivier Cora on Jan 9, 2008 12:38 PM

Constant Selection in BEx Query Designer on BI7

Hi guys
According to this blog <a href="/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection Selection</a>, we can create constant selection on both Characteristics and Key figures. I understand how to do it with restricted key figures.
Can anyone give me a step by step guide on how to create constant selection for a Characteristic in BEx Query Designer on BI7. I can't find options for 'constant selection'
Or is this the same thing when you include or exclude values?
Message was edited by:
jimi ogun

Thanks Krishna
I am actually using a Multiprovider for my queries but business requirements mean I need to create joins.
I am trying to avoid Infosets and I believe another way is to use the Constant Selection feature in Query Designer.
Going back to my previous posting, I know how this is done with a restricted KF but I don't know how when it comes to characteristics.
Can anyone help?

How to calculate First Date of Posting Period in BEx Query

Hi,
I have 2 reporting requirements as follows:
1) User will either enter a single posting period in a fiscal year or can enter a range of posting periods.
Based on user selection I need to display three key figures in a report.
Key figure 1 and Key Figure2 should be the summarized values for each posting period.
key Figure 3 should be the value on the first date of that particular posting period (in case user selects multiple posting periods i should derive the value of the first date of each posting period).
2) Also, in another report I need to display only top 8 values for one key figure in the report.
Please let me know the method or code required to get this Functionality.
Thanks in advance.

First Report
1. Create Restricted KeyFigure 1 & 2 for the summarized values.
2. Create a Customer Exit Variable for getting the first date of the posting period, this should be of type Interval. Write code using FM FIRST_DAY_IN_PERIOD_GET to get. Read the selection variable to see the range of posting period and you have to insert that many first dates into this variable.
3. Create a new Restricted KeyFigure 3 and use the Customer Exit variable created in Step 2
Second Report
Use the Top N functionality of BEx and create a workbook. You can set the option Refresh query when the workbook is open so that the data is current when opened.
Hope this helps.

Dynamic quarters in Bex query

Hi guys,
I need to represent a dynamic structure of 5 quarter (actual quarter and 4 quarter ago) in a bex query.
The representation will be, depending of the entry variable:
Case 1:
*Scenary 1     *
Period: 12,11,10     4(Actual)     Year
Year: 2008          3(-1)     Year
          2(-2)     Year
          1(-3)     Year
          4(-4)     Year-1
*Scenary 2     *
*Case 2:     *
Period: 9,8,7     3(Actual)     Year
Year: 2008          2(-1)     Year
          1(-2)     Year
          4(-3)     Year-1
          3(-4)     Year-1
*Scenary 3               *
Case 3
Period: 6,5,4     2(Actual)     Year
Year: 2008          1(-1)     Year
          4(-2)     Year-1
          3(-3)     Year-1
          2(-4)     Year-1
Case 4
*Scenary 4     *
Period: 3,2,1     1(Actual)     Year
Year: 2008          4(-1)     Year-1
          3(-2)     Year-1
          2(-3)     Year-1
          1(-4)     Year-1
The infobject used is 0calquarter, don´t have the year associated in format (quarter.year) also this is in 0fiscyear; then my doubt is:
1. How to control the year movement? I need to create a exit for validate each quarter based in entry variable. It is possible generate in a customer exit variable the generic code for determine the 4 quarters different to actual quarter?
Thank you very much for your collaboration.
Regards,
Jeysi

Hi Jeysi,
You are looking for offset variables. Please have a look at the following documentation for an example:
http://help.sap.com/saphelp_nw70/helpdata/en/3f/89533e5ff4d064e10000000a114084/frameset.htm
Best regards,
Janine

Dynamic filter on time characteristics on OLAP SAP BEX query based universe

Dear all,
I'm currently working on the integration between SAP NetWeaver BI 7.0 and SAP BusinessObjects XI 3.1 FP 1.5 via integration kit.
I've built an OLAP universe on the top of a BW query based on a multiprovider that contains 10 infocubes.
Everything works fine but I need to create a filter in the OLAP universe that allows to restrict data by current date (e.g. using TIME characteristic of Infocube such as 0CALDAY or 0CALMONTH). From that filter we could start creating other conditions to compare data to different time periods.
I've already tried to use a SAP exit variable in a BW query but this kind of object would restrict query data only by current date and for example it would be impossible to browse data by previous years (to bypass this problem we could use restricted key figures with different offsets but we have too many key figures in the query and the number of restrictions
would rise exponentially).
In a relational DataBase we can do that using a "where condition" based on 'CURRENTDATE' (SQL DB2 syntax).
Now, we need to apply the same logic but translated in MDX syntax.
Is it possible to enter a dynamic filter in the OLAP universe or just fixed or promt values ?
Any advise?
Thanks in advance.
Best Regards.
M.

Hi Ingo,
1) My question is: "How can I have to manage variable in BEX queries and in the UNIVERSE in order to obtain the maximum flexibility to create reports with measures on actual day (for example) without asking the user to promt a value ?"
I want to use an unique BEX query to define an unique UNIVERSE. On this UNIVERSE I want to create many reports (actual day, previous day, and so on).
If I restrict 0CALDAY with an EXIT variable then shall I be able to create a different restrictions on the same Universe based on 0CALDAY ?
2) Another question is:
Is it possible to insert an XML / MDX filter on the OLAP Universe with dynamic derivation of the system date ?
For example:
Instead of this:
<FILTER KEY="[0FISCYEAR].[LEVEL01].[NAME]">
    <CONDITION OPERATORCONDITION="Equal">
        <CONSTANT CAPTION="Z12008"></CONSTANT>
    </CONDITION>
</FILTER>
Is it possible to insert a tag with a dynamic function to derive the system date ?
Thanks in advance.
Best Regards.

How to make dynamic report heading in bex query

Hi Experts,
i have a bex query for the following rows and columns.
Proj   WBS   NETWROK   ACTIVITY are in Rows.
Scope work      total work are in Columns.
now i have to    show the report heading dynamically based on proj.
HEADING1.                         PROJ TEXT
HEADIND2                       REPORT FROM    XXX TO YYY   where XXX & YYY are dates input by the user on selection screen.
Please help me how i can achieve this heading in BEX.
Regards
vikas

Hi,
If you are using BEx analyzer :
On the top yo will find button say Insertnavigation pan, here you will get option to display the rows ( in your case Project) look for multiple options like tab dimension, display setting - explore it
If you are using BOBJ ANALYSIS, there also in display setting you have options to display variables, filters and even the characteristics.
Thank-You.
Regards,
VB

Dynamic filtering with BEx query variables in WebI 3.1

Hi experts.
Can anybody help me ?
1) I use BEx query variables in WebI 3.1 . But i can't understand how to order fields of selection screen in WebI reports
2) How can i use Dynamic filtering with BEx query variables in WebI 3.1 ?
It's need that list of second field on selection screen will be accoding to result of selection first field on selection screen and so on .
Need i use BEx user-exit variables ?
Thank you

Hi,
1) Variable sequence isn't respected in XI3.1 - and can't be modified in OLAP.unv (this enhancement exists in 4.0 )
2) Dynamic filtering? Yes, Exit routines are the best way to go for this.
Regards,
H

How to get resultset from procedure having dynamic select sql query ?

Hi,
I have created a procedure, in which there is dynamic select query. The procedure has one out put parameter which gives error code. When I compile that procedure it compiles successufully. When I run it it executes successfully and gives output error code. But I don't know how to get resultset of that dynamic select sql query. I need that.
This is the procedure:
create or replace
PROCEDURE uspGetProductDetailsMultiOrder
v_DefinitionDBName IN VARCHAR2,
     v_CommonDBName IN VARCHAR2,
     v_Filter_FilledStatus IN VARCHAR2,
     v_Filter_Internal_Counterparty IN nvarchar2,
     v_Filter_NoteType IN nvarchar2,
     v_Filter_Exchange IN nvarchar2,
     v_Filter_Issuer IN nvarchar2,
     v_Filter_Product_Category IN VARCHAR2,
     v_DateToFilter IN VARCHAR2,
     v_Filter_FromDate IN VARCHAR2,
     v_Filter_ToDate IN VARCHAR2,
     v_Active_YN_Flag IN NVARCHAR2,
     v_Entity_ID IN NVARCHAR2,
     v_ErrorNumber OUT NUMBER
   as
   v_SelectSQL nvarchar2(32767);
      v_Setting_Name nvarchar2(32767);
   v_Default_Value nvarchar2(32767);
   v_Config_Value nvarchar2(32767);
   v_CCY_ID NUMBER(10,0);
   v_CCY_Data nvarchar2(32767);
   v_CCY_List nvarchar2(32767);
   v_Seq_Id NUMBER(10,0);
   SWV_Active_YN_Flag NVARCHAR2(1);
   SWV_VarStr long;--varchar2(4000);
   SWV_TRANCOUNT NUMBER(10,0);
    SWV_fnc_SplitString_Id_var1 NUMBER(10,0);
   SWV_fnc_SplitString_Id_var0 NUMBER(10,0);
CURSOR RestrictTermsheetVisibilityByC
   IS select CS.Setting_Name,Default_Value,Config_Value
   from Config_Settings CS   LEFT OUTER JOIN Entity_Config EC ON EC.Setting_ID = CS.Setting_ID
   where EC.Entity_ID = v_Entity_ID AND Setting_Level = 'ENTITY';
   CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,','));
   --CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id,Data FROM imp;
   CURSOR GetRestrictTemplateListCursor
-- is select id,data from imp;
   IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,',')) ;
     --Parikshit 18-Jul-2010, active YN flag param added in SP
BEGIN
SWV_Active_YN_Flag := v_Active_YN_Flag;
   if SWV_Active_YN_Flag = ' ' then
      SWV_Active_YN_Flag := 'Y';
   end if;
   v_SelectSQL := ' ';
   v_SelectSQL := v_SelectSQL || ' Select ';
   v_SelectSQL := v_SelectSQL || ' NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency';
     --SET @SelectSQL = @SelectSQL + ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost '
   v_SelectSQL := v_SelectSQL || ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost ';
   v_SelectSQL := v_SelectSQL || ' , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag ';
   v_SelectSQL := v_SelectSQL || ' , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer';
   v_SelectSQL := v_SelectSQL || ' , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount ';
     --Added by Parikshit on 14-Jun-2011, to remove the unwinding amounts from the total issue size
     --SET @SelectSQL = @SelectSQL + ' , NOP.LastTimeWhenProductModified,NOP.Nominal_Amount as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty '
   v_SelectSQL := v_SelectSQL || ' , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ';
     --********************************************************END
   v_SelectSQL := v_SelectSQL || ' ,T2.Confirmed_Amount, T2.Confirmed_Shares';
   v_SelectSQL := v_SelectSQL || ' , T3.Live_Deals';
   v_SelectSQL := v_SelectSQL || ' , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL   ';
   v_SelectSQL := v_SelectSQL || ' , ( case    When UPPER(NM.PreHedged_YN) = ''Y'' Then ''Launched'' ';
   v_SelectSQL := v_SelectSQL || '              When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then ''Matured''';
   v_SelectSQL := v_SelectSQL || '              When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL) Then ''Launched''';
     --Ready to launch
   v_SelectSQL := v_SelectSQL || '              When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then ''Ready To Launch''';
     --Ready to launch
   v_SelectSQL := v_SelectSQL || '              When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate)    ) Then ''Ready To Launch''';
   v_SelectSQL := v_SelectSQL || '              When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate)    ) Then ''Ready To Launch''';
     --Warning trigger reached
   v_SelectSQL := v_SelectSQL || '              When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then ''Warning Trigger Reached''';
   v_SelectSQL := v_SelectSQL || '              Else ''Not Ready'' ';
   v_SelectSQL := v_SelectSQL || '              End)Launch_Status';
   v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Code';
      v_SelectSQL := v_SelectSQL || ' , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront,   case when UPPER(NM.PreHedged_YN) = ''Y'' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge';
      v_SelectSQL := v_SelectSQL || ' , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class ';
      v_SelectSQL := v_SelectSQL || ' , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '''' then N''Market'' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,''Atmaturity'') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,''N'') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC ';
   v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, ''Product'' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate ';
   v_SelectSQL := v_SelectSQL || ' from ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName|| '.Note_Master NM ';
   v_SelectSQL := v_SelectSQL || 'Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Master NI ';
      v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end )';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Order_Product NOP ';
   v_SelectSQL := v_SelectSQL || ' On NOP.Note_Master_ID = NM.Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_DefinitionDBName||'.AssetDef AD ';
   v_SelectSQL := v_SelectSQL || ' On AD.Code = NM.Asset';
     v_SelectSQL := v_SelectSQL || ' AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) ';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Parameter IP ';
      v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end )';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Template_Master TM ';
   v_SelectSQL := v_SelectSQL || ' On TM.Template_Id = NM.Template_ID ';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Scheme_Codes SC ';
   v_SelectSQL := v_SelectSQL || ' On SC.Scheme_Alias = NM.Type';
   v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Counterparty_Master CM ';
   v_SelectSQL := v_SelectSQL || ' On CM.CM_ID = NM.Counterparty';
      v_SelectSQL := v_SelectSQL || ' Left Outer Join      ';
   v_SelectSQL := v_SelectSQL || ' ( ';
   v_SelectSQL := v_SelectSQL || ' Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from ';
   v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Deals ';
   v_SelectSQL := v_SelectSQL || ' where Prematurity_Date IS NOT NULL';
   v_SelectSQL := v_SelectSQL || ' AND (UPPER(Deletion_Reason ) = ''PART REDEMPTION'' or UPPER(Deletion_Reason ) = ''FULL REDEMPTION'')';
   v_SelectSQL := v_SelectSQL || ' Group by Note_master_ID ';
   v_SelectSQL := v_SelectSQL || ' ) ND ';
   v_SelectSQL := v_SelectSQL || ' On ND.Note_Master_ID = NM.Note_Master_ID';
if (v_Filter_FilledStatus = ' ' OR UPPER(v_Filter_FilledStatus) = 'ALL' ) then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND NOP.Filled_Status IN (' || v_Filter_FilledStatus || ')';
   end if;
     --AND NOP.Internal_Counterparty = 'DEFAULT''
   if(SUBSTR(to_char(v_Filter_Internal_Counterparty),1,4000)= ' ') then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND NOP.Internal_Counterparty IN (' || v_Filter_Internal_Counterparty || ')';
   end if;
     --SET @SelectSQL = @SelectSQL + ' --Filter--'
   v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN ';
   v_SelectSQL := v_SelectSQL || ' (';
   v_SelectSQL := v_SelectSQL || '   select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares ';
   v_SelectSQL := v_SelectSQL || '   from '||v_CommonDBName||'.Note_Order_RM ';
   v_SelectSQL := v_SelectSQL || '   Where substr(UPPER(Order_Status_Flag),1,6) = ''YYYYYY'' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = ''N'' ';
   v_SelectSQL := v_SelectSQL || '   group by Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' ) T2';
   v_SelectSQL := v_SelectSQL || ' ON T2.Note_Master_ID = NM.Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
   v_SelectSQL := v_SelectSQL || ' (';
   v_SelectSQL := v_SelectSQL || '   Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals ';
   v_SelectSQL := v_SelectSQL || '   from '||v_CommonDBName||'.Note_Deals ND ';
   v_SelectSQL := v_SelectSQL || '   where ND.Active_YNFlag = ''Y'' ';
   v_SelectSQL := v_SelectSQL || '   group by Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' ) T3';
   v_SelectSQL := v_SelectSQL || ' ON T3.Note_Master_ID = NM.Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
   v_SelectSQL := v_SelectSQL || ' (';
   v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
   v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged,';
   v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding,';
   v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY,';
   v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL,';
   v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY,';
   v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL';
   v_SelectSQL := v_SelectSQL || ' From';
   v_SelectSQL := v_SelectSQL || ' (';
   v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
   v_SelectSQL := v_SelectSQL || ' SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL,';
   v_SelectSQL := v_SelectSQL || ' SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL';
   v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
   v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''BUY'' ';
   v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' Union';
   v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
   v_SelectSQL := v_SelectSQL || ' 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL,';
   v_SelectSQL := v_SelectSQL || ' 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL';
   v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
   v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''SELL'' ';
   v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' ) ';
   v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' ) BS';
   v_SelectSQL := v_SelectSQL || ' ON BS.NH_Note_Master_ID = NM.Note_Master_ID';
   v_SelectSQL := v_SelectSQL || ' Where NM.Verify_YN_Flag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' AND NM.Active_YN_Flag = ''' || SWV_Active_YN_Flag || '''';
   if(SUBSTR(to_char(v_Filter_NoteType),1,4000) = ' ' OR UPPER(v_Filter_NoteType) = 'ALL' ) then
           v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND NM.Type IN (' || v_Filter_NoteType || ')';
   end if;
IF UPPER(v_Entity_ID) <> 'ALL' then
      OPEN RestrictTermsheetVisibilityByC;
      FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
      WHILE RestrictTermsheetVisibilityByC%FOUND   LOOP
     --2) Convert comma separated ccy (CNY,HKD,USD) string to single quote ccy with comma separated Ccy ('CNY','HKD','USD') string
         if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_CCY') then
            if v_Config_Value is not null then
          SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var0 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
               IF (SWV_fnc_SplitString_Id_var0 > 0) then
                    --print 'Before Single quote separated ccy : ' + '''' + @Config_Value + ''''
                  v_Seq_Id := 0;
                  OPEN Get_RestrictCCY_List_Cursor;
                  FETCH Get_RestrictCCY_List_Cursor
                  INTO v_CCY_ID,v_CCY_Data;
                  WHILE Get_RestrictCCY_List_Cursor%FOUND   LOOP
                     if v_Seq_Id = 0 then
                        v_CCY_List := '''' || v_CCY_Data || '''';
                     else
                        v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
                     end if;
                     v_Seq_Id := v_Seq_Id+1;
                     FETCH Get_RestrictCCY_List_Cursor INTO v_CCY_ID,v_CCY_Data;
                  END LOOP;
                  CLOSE Get_RestrictCCY_List_Cursor;
                    --print 'After Single quote ccy : ' + @CCY_List
                  v_SelectSQL := v_SelectSQL || ' AND nvl(NM.Denomination_Ccy,NM.Currency) NOT IN (' || v_CCY_List   || ')';
               end if;
            end if;
         end if;
--3) Convert comma separated template (ELN,BELN,BELN_B) string to single quote template code with comma separated template ('ELN','BELN','BELN_B') string
         if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_SUBSCHEME') then
            if v_Config_Value is not null then
      SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var1 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
               IF (SWV_fnc_SplitString_Id_var1 > 0) then
                  v_Seq_Id := 0;
                  OPEN GetRestrictTemplateListCursor;
                  FETCH GetRestrictTemplateListCursor
                  INTO v_CCY_ID,v_CCY_Data;
                  WHILE GetRestrictTemplateListCursor%FOUND
                  LOOP
                     if v_Seq_Id = 0 then
                        v_CCY_List := '''' || v_CCY_Data || '''';
                     else
                        v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
                     end if;
                     v_Seq_Id := v_Seq_Id+1;
                     FETCH GetRestrictTemplateListCursor INTO v_CCY_ID,v_CCY_Data;
                  END LOOP;
                  CLOSE GetRestrictTemplateListCursor;
               --print 'After Single quote template code: ' + @CCY_List
                  v_SelectSQL := v_SelectSQL || ' AND TM.Template_Code NOT IN (' || v_CCY_List   || ')';
               end if;
            end if;
         end if;
         FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
      END LOOP;
      CLOSE RestrictTermsheetVisibilityByC;
   end if;
if (v_Filter_Exchange = ' ' OR UPPER(v_Filter_Exchange) = 'ALL') then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND NM.Exchange IN (' || v_Filter_Exchange || ')';
   end if;
     --SET @SelectSQL = @SelectSQL + ' --AND NM.Issuer = 4'
if (v_Filter_Issuer = ' ' OR UPPER(v_Filter_Issuer) = 'ALL') then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND NM.Issuer IN (' || v_Filter_Issuer || ')';
   end if;
      if v_Filter_Product_Category    = ' ' then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      v_SelectSQL := v_SelectSQL || ' AND UPPER(NM.Note_Issuer_Type) IN (''' || v_Filter_Product_Category || ''')';
   end if;
   if UPPER(v_DateToFilter) = 'NA' then
      v_SelectSQL := v_SelectSQL || ' ';
   else
      if UPPER(v_DateToFilter) = 'CLOSE_DATE' then
         v_SelectSQL := v_SelectSQL || ' AND to_char( '|| v_DateToFilter || ') >= to_date(''' || v_Filter_ToDate || ''');
                         -- AND convert(smalldatetime,''' || v_Filter_ToDate || ''',106) ';
      else
         v_SelectSQL := v_SelectSQL || ' AND to_char(''' || v_DateToFilter || ''') BETWEEN to_date(''' || v_Filter_FromDate || ''') AND to_date(''' || v_Filter_ToDate || ''') ';
      end if;
   end if;
   v_SelectSQL := v_SelectSQL || ' Order by NM.Product_Name';
   SWV_VarStr := v_SelectSQL;
   DBMS_OUTPUT.PUT_LINE(SWV_VarStr);
   EXECUTE IMMEDIATE SWV_VarStr;
   IF SQLCODE <> 0 then
      GOTO ERROR_HANDLER;
   end if;
   IF SQL%rowcount > 0 then
      COMMIT;
      SWV_TRANCOUNT := SWV_TRANCOUNT -1;
   end if;     --Commit Transaction
   v_ErrorNumber := SQLCODE;
   RETURN;
   << ERROR_HANDLER >> v_ErrorNumber := SQLCODE;
   ROLLBACK;
   SWV_TRANCOUNT := 0;     --Rollback Transaction
   RETURN;
END;Please suggest something. Thanks
Edited by: BluShadow on 30-Nov-2011 11:00
added {noformat}{noformat} tags for formatting of code. Please read {message:id=9360002} to learn to do this yourself in future.

Connecting to the database sample_adf_finiq_common.
Select NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = 'Y') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = 'Y') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ,T2.Confirmed_Amount, T2.Confirmed_Shares , T3.Live_Deals , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL , ( case When UPPER(NM.PreHedged_YN) = 'Y' Then 'Launched' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then 'Matured' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL) Then 'Launched' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then 'Warning Trigger Reached' Else 'Not Ready' End)Launch_Status , NI.Issuer_Code , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = 'Y' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '' then N'Market' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,'Atmaturity') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,'N') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, 'Product' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate from Sample_ADF_finiq_Common.Note_Master NM Left Outer Join Sample_ADF_finiq_Common.Issuer_Master NI On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Note_Order_Product NOP On NOP.Note_Master_ID = NM.Note_Master_ID Left Outer Join Sample_ADF_finiq_Common.AssetDef AD On AD.Code = NM.Asset AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) Left Outer Join Sample_ADF_finiq_Common.Issuer_Parameter IP On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Template_Master TM On TM.Template_Id = NM.Template_ID Left Outer Join Sample_ADF_finiq_Common.Scheme_Codes SC On SC.Scheme_Alias = NM.Type Left Outer Join Sample_ADF_finiq_Common.Counterparty_Master CM On CM.CM_ID = NM.Counterparty Left Outer Join      ( Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from Sample_ADF_finiq_Common.Note_Deals where Prematurity_Date IS NOT NULL AND (UPPER(Deletion_Reason ) = 'PART REDEMPTION' or UPPER(Deletion_Reason ) = 'FULL REDEMPTION') Group by Note_master_ID ) ND On ND.Note_Master_ID = NM.Note_Master_ID AND NOP.Internal_Counterparty IN (1) LEFT OUTER JOIN ( select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares from Sample_ADF_finiq_Common.Note_Order_RM Where substr(UPPER(Order_Status_Flag),1,6) = 'YYYYYY' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = 'N' group by Note_Master_ID ) T2 ON T2.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals from Sample_ADF_finiq_Common.Note_Deals ND where ND.Active_YNFlag = 'Y' group by Note_Master_ID ) T3 ON T3.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( SELECT NH_Note_Master_ID, (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged, (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding, SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY, SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL, SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY, SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL From ( SELECT NH_Note_Master_ID, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'BUY' GROUP BY NH_Note_Master_ID Union SELECT NH_Note_Master_ID, 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL, 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'SELL' GROUP BY NH_Note_Master_ID ) GROUP BY NH_Note_Master_ID ) BS ON BS.NH_Note_Master_ID = NM.Note_Master_ID Where NM.Verify_YN_Flag = 'Y' AND NM.Active_YN_Flag = 'Y' AND UPPER(NM.Note_Issuer_Type) IN ('Internal') AND to_char('16-oct-11') BETWEEN to_date('15-oct-11') AND to_date('17-oct-11') Order by NM.Product_Name
V_ERRORNUMBER = 0
Process exited.
Disconnecting from the database sample_adf_finiq_common.
here v_errornumber=0 is the output when i run it in oracle sql developer.

Variable Selections in BEx Query Variants

I am trying to save a variant for a BEx query that uses a floating date range. I want the date range to move with the calendar. I r/3 this is done with the variable selection. In BW 3.5, I don't see how this is possible. I only see options for TVARVC which are user exit selections. Can someone point me in the right direction.
Regards,
Kevin B

Hi Kevin
Your requirment is that date range should move with calendar (ex. In first week , the date range should be from 1 to 7 of the current month & in second week the date range should be from 1 to 15 of current month) ...if it is like this then you can go ahead with - create a variable and do the coding with sydatum (system date ) and embed the required logic. But if your requirement is completely random then you can not use this.
Hope this helps
Regards
Pradip
(Rewarding points is the way of saying thanks on SDN !!)

Bex query- Dynamic selection of next 4 periods according to Month drilldown

Similar Messages

Maybe you are looking for