BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

Similar Messages

Error when reading the data of infoprovider

Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
Heinz

Hi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit

Error running query - 'Error reading the data of InfoProvider 0TCT_VC01'

Hi,
I have worked through all the steps to activate BI statistics in our system (Netweaver 2004s SAP_BW 700 BI_CONT 702) yet some of the queries are not working.
Specifically when I run the query 0TCT_MC01/0TCT_MC01_Q0131 I get an error that reads:
Error reading the data of InfoProvider 0TCT_VC01
There is still no data source assigned to VirtualProvider 0TCT_VC01
Any help on how to resolve this would be appreciated.
Thanks.
Dyllan

Did you install the underlying basic cube for the virtual cube(FM) to read the data from? That shoudl be 0TCT_C01- I guess

Error reading the data of InfoProvider /APC/FINGLV01

Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AM

At this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle

MSS 60.1.19 - Salary Development iView - Internal error wh reading the data

Hi guys!
I face the problem of an iView Salary Development. I get error: Internal error while reading the data. I found a thread with the same problem, but there is no solution. Did anyone of you solve this problem?
Thanx for answers!
Peter

HI Peter
I have the ivew salary development wroking more or less. There are some problems with totals from wage types including IT14 & 15 which I have reported and waitnig for response frmo SAP..... but at least IT0008 is working ok on it.
I didn't get this message so let me know how to help...! Ha<ve you done the config for the iview yet?
helen

Error reading the data of InfoProvider

Hi experts,
The execution of a query raises an exception.
If we execute it through TC RSRT we get next messagge:
"EError while reading data; navigation is possible
EError reading the data of InfoProvider ZBCS_V10
EUnable to determine consolidation area for data basis GP
I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE
'No Applicable Data Found"
Note 887383 aplies to solve the problem but the solution is update the
system to level patch 6 but we have a higher level patch (15).
How can we solve this issue?
Regards.

Hello,
The Cube ZBCS_V10 cannot be a standard cube as it does not belong to SAP Name Space, generally starting with '0'.
Can you check on the logic behind population of this cube. Its a virtual cube i believe and there might be some FM or real TIme mode to extract data.
Also you can try to check whether you can display data in the cube. From the context menu of the cube, select display data. Here check whether you can see the needed data.
If you cannot then there is some problem with the data population.
Regards,
Shashank

RSA7 Delta Quere error when reading the data

I am working on BW3.5
I have six datas sources which extracts data from R/3 to BW
one of the datasource is failed. when checked RSA7, selected the failed datasource and executed, throws the short dump error.
I have analysed the error.
The shortdump is creating when it is reading data from the datasource.
There is a problem in the standard RFC table TRFCQOUT and ARFCSSTATE.
The table TRFCQOUT has one record for Payment for the ARFCTIME which is missing in the ARFCSSTATE table.
The table ARFCSSTATE has no record for the payment
When extracting data for the payment data source short dump error is thrown because of mismatch entries in both the tables.
Kindly let me know what exactly the tables are taken into account when the data is moved from R/3 to BW
I think if the data can be deleted from the TRFCQOUT table then if will go fine but I am sure what could be implications
Kindly let me know how best I can resolve the issue.

Hello Pavan ,
You can delete the Records from Deleted from TRFC* and the load will be fine BUT you are not suppose to do that, this simply would mean that we have lost the record , hence this is not advisable.
Instead check and analyse the record there to see if :
1.The record is an old one hence not useful anymore
2.The record has correct values that are suppsoed to be
If the record seems to be obviously redundant or useless we can delete it , else the correction should eb done on the source system side.
Regards,
Tapish

Error in Reading the data when double quote(") is present.

Hi all,
We are trying to read the delimited data of below type: using file adapter
00|ABC   |00|          |ZZ|ABC      |ZZ|               |090914|above data works fine ..but when we have data of the below form:double quote after pipe symbol
00|"ABC   |00|          |ZZ|ABC      |ZZ|               |090914|
{code}
when a double is present at the begininng of the pipe sysmbol the message is getting rejected...but when we have other symbol's like single quote or plus sign at the beggining the its working fine.
can anyone help me wat the issue is...im using soa 10.1.3.4

any help.

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

Error while reading Infoset data

Hi,
I have installed the BI 7.0 content for E-recruiting. I have activated
the infosets 0ERC_IS01, 0ERC_IS02, 0ERC_IS03, 0ERC_IS04. All the
corresponding underlying objects are active and loaded. When I try to
display the data for IS02, 03, 04, I get the below error.::
1. SQL0104N An unexpected token """" was found
following ""T00003"."OBJVERS" =". Expected tokens may
include: "<space>". SQLSTATE=42601
2. Error when generating the SQL statement
3. Error reading the data of InfoProvider 0ERC_IS02.
I am able to display the data for IS01 without any problem. I am on SAPKW70017.
Kindly suggest how to proceed further.
Regards,
Adarsha A

Hi,
Yes I have check all the underlaying objects are active and loaded.
IS01 is made of ODS - 0ERC_DS01 and Info object 0REQUI. ODS is time independent and Info object is time dependent. This combination is working very fine.
Now IS02 is made of info objects - 0CDCY, 0CANDIDATE, 0REQUI. All these objects are time dependent. Will time dependent objects require some other setting? how these are BIcontent objects.
Another observation is that if I create infosets combining ODS - 0ERC_DS01and any one info object of IS02, it is working fine. But ODS with more than one info object is not working.
Kindly suggest.
Regards,
Adarsha A

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

BEX query error---Error reading the data of InfoProvider

Similar Messages

Maybe you are looking for